面向零件形状的计算机图形库的开发

论述了CAD技术中参数化设计的三种建模方法，重点介绍了基于特征的参数化建模原理。在此基础上，分析机械设计中的机构结构，归纳出其零件的几何特征构成。设计了机构CAD图形库，并提出了该图形库生成步骤和人机交互界面。     

FeCrAIW电弧喷涂层组织的致密化研究

采用激光辐照对FeCrAlW电弧喷涂层的组织进行致密化处理,借助扫描电镜和X衍射对涂层的组织进行了分析.测试了涂层的显微硬度.结果表明:涂层组织致密度提高,孔隙率明显降低.随着激光扫描速度的增加,涂层的显微硬度降低.在较低的扫描速度下,涂层与基体之间形成互熔区,涂层与基体之间产生良好的冶金结合.     

胫骨生物陶瓷复合材料的微结构增韧机理

扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料.羟基磷灰石具有层状的微结构并且平行于骨的表面排列.观察也显示这些羟基磷灰石层又是由许多羟基磷灰石片所组成,这些羟基磷灰石片具有长而薄的形状,也以平行的方式整齐排列.基于在胫骨中观察到的羟基磷灰石片的微结构特征,通过微结构模型分析及实验,研究了羟基磷灰石片平行排列微结构的最大拔出能.结果表明,羟基磷灰石片长而薄的形状以及平行排列方式增加了其最大拔出能,进而提高了骨的断裂韧性.     

Comparative analysis of functional possibilities of methods of pulse treatment of a melt

This paper describes the general features of the functional methods of electrohydropulse, pulse electrocurrent, and magnetic pulse treatment processes of the melt in order to positively vary its crystallizaton ability.     

Effect of solidification rate of the structure of alloys of the system Fe-W

Conclusion In alloy Fe-42% W atomized with a cooling rate during solidification within the limits from 5·10³ to 1·10⁵°C/sec with the maximum cooling rate (not less than 10⁵°C/sec) precipitation of -phase (Fe₇W₆) from the liquid melt is suppressed. In granules of alloy obtained with a high solidification rate it is possible to achieve total dissolution of tungsten in solid solution (42%). Subsequent heating causes precipitation of -phase in dispersed form.I. P. Bardin Central Scientific-Research Institute of Ferrous Metallurgy (TsNIIChERMET) Moscow. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 34–36, September, 1990.     

高等教育国际化与中国高等教育施化力培育

本文从化层、化型、化向与化力等方面考察高等教育国际化的应然本质属性 ,描述与分析中国高等教育在国际化潮流中表现出的发展态势 ,针对种种态势提出中国高等教育核心施化力培育战略 ,以使中国高等教育乃至世界高等教育真正地走向国际化     

Development of the technology of ultrasonic welding of components made of Capron tapes

The technology of ultrasonic welding of components made of Capron tapes producing welded joints with high strength parameters has been developed. The numerical values of the main parameters of the conditions of ultrasonic welding of the Capron tapes are determined. It is shown that the increase in the amplitude and welding pressure shortens the welding time. The experimental results show that the Capron tapes are characterized by geometrical homogeneity in both the transverse and longitudinal direction so that the welded joints can be produced both along and across the tape.     

Ab-initio calculation of enthalpies of formation of intermetallic compounds and enthalpies of mixing of solid solutions

A large number of ab-initio calculations of energies of formation of intermetallic compounds have been performed in the last 15 years. The currently used methods are listed. The paper presents a review of the aluminium based compounds which have been studied. Comparisons of calculated and experimental enthalpies of formation are provided for aluminim-3d and-4d transition metal alloys at equiatomic composition. The modelling of the enthalpies of mixing of solid solutions based on a given lattice is described.     

Features of formation of the structure in production of blanks of disks of heat-resistant nickel alloys

Conclusions To provide a high level of mechanical properties in wrought blanks of cast ÉP741NP and ÉP962 alloys it is necessary to form controlled structures. A necklace-type structure formed in homogenizing isostatic treatment, subsequent thermomechanical working including alternation of the operations of deformation in the (+)-area and recrystallization anneals, and final heat treatment is preferable. The temperature conditions of all stages of thermomechanical working are strictly controlled, especially the final operation of deformation and heating for hardening. To eliminate hardening cracks and distortions it is necessary to use molten salts at t=600°C as quenchants. The use of multiple production operations makes it possible to significantly reduce the structural inhomogeneity related to inhertance of the original dendritic structure. However, the structure of the final semifinished product is nevertheless characterized by a difference in occurrence of the processes of polygonization and recrystallization between the former dendritic cells and the interdendritic spaces in deformation and heat treatment.To obtain structurally homogeneous blanks for gas turbine engine parts it is necessary to use basically new methods of remelting such as vacuum double electrode remelting and electron beam remelting with an intermediate vessel.Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 25–29, December, 1991.     

试论洋务派教师聘任的思想

洋务派在洋务学堂的办学活动中,为了解决西学专业学科的教学困难,采用了聘请外籍教师的应急措施.他们以真才实学,合同制管理作为主导思想,并认为这种解决师资的途径只是权宜之计,并非久远.从客观上看,洋务派的教师聘任思想有深刻的历史影响.     

Effect of the Error of Measurement of Current Harmonics on the Accuracy of Determination of Magnetic Characteristics

Metal Science and Heat Treatment - The effect of the error of measurement of the form of current harmonics on the accuracy of determination of weber-ampere characteristics of electrical devices is...     

Prospects of the Use of Synergetic Approach to Solution of Problems of the Science of Nanomaterials

A synergetic approach to solution of problems of self-controlled synthesis of nanostructures and creation of self-organizing nanotechnologies is considered in connection with the superproblem of creation of materials with functional properties resembling those of biosystems. __________ Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 7, pp. 55 – 61, July, 2005.     

Kinetics of the oxidation of metals — Influence of self-diffusion of metal

The importance of the self-diffusion of a metal during its oxidation by a gas is treated for the cases of nonstoichiometric oxides having either interstitial cation or cation vacancies. We have established a general relationship for the reaction rate when a mixed diffusion process occurs. From this relationship, we have shown that the pressure dependence can be different, according to whether the rate-determining process is the self-diffusion through the metal or through the product.     

谈谈汽车白车身CO2焊接质量的控制

本文介绍了CO2气体保护电弧焊的冶金特点,CO2气体保护电弧焊焊接过程中的熔滴过渡形式;从焊丝的冶金过程,焊接时的工艺参数的选择及调整等方面探讨了汽车白车身CO2焊接质量的控制。     

齿轮温锻组合凹模设计

运用Pro/E 4.0构建齿轮模型得出齿轮横截面积,把凹模齿形部分看成当量圆,通过齿轮横截面积得到当量直径,从而利用Lame公式理论计算与经验数据的有效结合,对齿轮温锻成形的组合凹模进行优化设计和强度校核。