Ordinary size effects and deviations from Matthiessen's rule in the resistance of fine wires

Contrary to previous statements in the literature, large deviations from Matthiessen's rule in fine wiresare to be expected on the basis of a straight-forward solution of the ordinary transport equation, assuming the relaxation-time approximation and imposing the idealized condition of diffuse scattering of electrons at the boundaries. Using Chambers' path-integral method to evaluate the current density in a wire of arbitrary cross-sectional shape, the effects of boundary scattering on the resistivity in the regimed 0.1 have been calculated for two model Fermi surface geometries. For the temperature-dependent part of the resistivity, _d (T) _d (T)– _d (0), two distinct types of behavior are found in the alternative cases: (1) for a spherical Fermi surface, _d(T) increases logarithmically with _d(0); (2) for a cylindrical Fermi surface, _d (T) increases essentially linearly with _d (0). [In each case the qualitative dependence of _d(0) on /d is, for practical purposes, linear. However, the correct value of the product in the cylindrical case is not simply given in the ordinary way by the slope of an empirical plot of _d (0) vs.d ^–1.] A comparison of theoretical results for the two simple models with the published data for indium and gallium shows that the actual temperature-dependent size effects are consistent, both qualitatively and, by a rough estimation, quantitatively, with the expected behavior.     

Temperature-density parameters of Freon-13 on the saturation line

Experimental data of a high degree of accuracy are presented on the temperature-density parameters of Freon-13 on the saturation line in the density range of (0.08246–1.6061)·10 kg/m³.Notation T absolute temperature of phase transition from two-phase to one-phase state (or vice versa) - T_c critical temperature - , densities of liquid and vapor, respectively, on saturation line - _c density at critical points - average density - =(T_c–T)/2 reduced temperature - parameter of order, equal to ' – _c – b for the liquid phase and _c + b – "for the vapor phase Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 37, No. 5, pp. 830–834, November, 1979.     

Equation of state of3He near its liquid-vapor critical point

We report high-resolution measurements of the pressure coefficient (P/T) for³He in both the one-phase and two-phase regions close to the critical point. These include data on 40 isochores over the intervals–0.1t+0.1 and–0.2+0.2, wheret=(T–T _c )/T _c and =(– _c )/ _c . We have determined the discontinuity (P/T) of (P/T) between the one-phase and the two-phase regions along the coexistence curve as a function of . The asymptotic behavior of (1/) (P/T) versus near the critical point gives a power law with an exponent (+–1)^–1=1.39±0.02 for0.010.2 or–1×10 ^–2t–10 ^–6 , from which we deduce =1.14±0.01, using =0.361 determined from the shape of the coexistence curve. An analysis of the discontinuity (P/T) with a correction-to-scaling term gives =1.17±0.02. The quoted errors are fromstatistics alone. Furthermore, we combine our data with heat capacity results by Brown and Meyer to calculate (/T) _c as a function oft. In the two-phase region the slope (²/T ²)_c is different from that in the one-phase region. These findings are discussed in the light of the predictions from simple scaling and more refined theories and model calculations. For the isochores 0 we form a scaling plot to test whether the data follow simple scaling, which assumes antisymmetry of – ( _c ,t) as a function of on both sides of the critical isochore. We find that indeed this plot shows that the assumption of simple scaling holds reasonably well for our data over the ranget0.1. A fit of our data to the linear model approximation is obtained for0.10 andt0.02, giving a value of =1.16±0.02. Beyond this range, deviations between the fit and the data are greater than the experimental scatter. Finally we discuss the (P/T) data analysis for ⁴ He by Kierstead. A power law plot of (1/) P/T) versus belowT _c leads to =1.13±0.10. An analysis with a correction-to-scaling term gives =1.06±0.02. In contrast to ³ He, the slopes (²/T ²)_c above and belowT _c are only marginally different.Work supported by a grant from the National Science Foundation.     

Temperature dependence of electrical resistivity of deformed and undeformed V-rich V3Si single crystals

The electrical resistivity (T) of V-rich V₃Si single crystals (T _c-11.4 K) was measured from 4.2 to 300 K along the directions of [1 0 0] and [1 1 1] before and after plastic deformation at 1573 K. Anisotropy of (T) was observed although V₃Si has the cubic A15 structure. Plastic deformation does not affect the normal-state (T) behaviour but changes the normal-superconducting transition width T_c. At low temperatures (T _c<T 40 K), (T) varies approximately as T ⁿ where n-2.5 and this behaviour does not contradict the (0)- phase-diagram plot proposed by Gurvitch, where is the electron-phonon coupling constant and (0) is the residual resistivity.     

Velocity of second sound and superfluid density near the superfluid transition in3He-4He mixtures

Using superleak condenser transducers, the velocity of second soundU ₂ has been measured near the superfluid transition temperature T in³He-⁴He mixtures with molar concentrationsX of³He of 0.0, 0.038, 0.122, 0.297, and 0.440. We have obtained the superfluid density _s/ fromU ₂ on the basis of linearized two-fluid hydrodynamics. The results for _s/ are consistent with those obtained from the oscillating disk method, as expected from two-fluid hydrodynamics. The value of _s/ at eachX could be expressed by a single power law, _s/=k, where =1-T/R, with the experimental uncertainty. It is found that the exponent is independent of concentration forX0.44 within the experimental uncertainty. This concentration independence of is in agreement with the universality concept. From the conclusion that the values of are universal forX0.44, the concentration dependence of the superfluid component _s is expressed by an empirical equation _s(X, )=²_s(0, ). It is found that corresponds to the volume fraction of⁴He in the superfluid³He-⁴He mixture. The value of is in agreement with that obtained from the measurement of the molar volume by others.This paper is based on a thesis submitted to Tokyo University of Education in partial fulfillment of the requirements for the Ph.D. degree.     

Equation of state of a3He-4He mixture near its liquid-vapor critical point

Measurements of the pressure coefficient (P/T)_,x are reported for a ³ He- ⁴ He mixture with a mole fractionX=0.805 of ³ He in the neighborhood of the liquid-vapor critical point. These include data on 16 isochores taken over the density interval–0.50.5 and over the temperature range–0.1 t0.1, where =(– _c )/ _c andt=(T-T _c )/T _c ,with _c andT _c ,respectively, the critical density and temperature of the mixture. From the discontinuity of (P/T)_,x at the boundary between the two-phase and the one-phase regions we determine the dew-bubble curve nearT _c with better precision than was done in recentPVT experiments. From the extrapolation of data not approachingT _c closer than1 mK, (P/T)_,x along the critical isochore appears to be discontinuous atT _c ,while for the isochore / _c 0.92, (P/T)_,x is continuous across the dew curve. It is found that this latter isochore cuts the dew curve at its highest temperature. These observations are discussed in terms of general thermodynamic arguments and theoretical predictions of the asymptotic behavior. We calculate (P/T)_,x from the scaling equation of state proposed by Leung and Griffiths for ³ He- ⁴ He mixtures, using their numerical parameters. In spite of some systematic deviations, especially in the two-phase region, there is in general good agreement with experimental results. In particular, the shape of the measured dew-bubble curve and the apparent discontinuity of (P/T)_,x along the critical isochore show excellent agreement with theory.Work supported by a grant from the National Science Foundation. A report of this work has been presented at the Washington Meeting of the APS [Bull. Am. Phys. Soc. 20, 618 (1975)].     

Relaxations in semicrystalline polyethyleneterephthalate using thermally stimulated currents

Relaxation processes at temperatures above 20 °C in semicrystalline polyethylene-terephthalate have been studied using thermally stimulated depolarization currents (TSDC). The discharge curve shows three relaxation peaks (c, c and *) whose positions and intensities depend on the polarization conditions and the crystallinity. Relaxations c and c are heteropolar, while * may be homopolar or heteropolar according to the polarization temperature used. The effect of the crystallinity on these relaxations has been analysed by the thermal steps stimulation (TSS) method applied to an amorphous sample. Results show that c is fundamentally a dipolar relaxation associated with the amorphous interlamellar zone. The relaxation c is associated with the release of a free charge trapped in the amorphous regions, and * is a Maxwell–Wagner–Sillars relaxation associated with crystalline – amorphous interphases. For polarization temperatures above 150 °C, two relaxations are observed only as a consequence of overlapping C and * relaxations. © 1998 Chapman & Hall     

Shock Compression of Porous Aluminum and Nickel at Megabar Pressures

Data are given on shock compression of porous samples of aluminum with the initial density ₀₀= 0.34 g/cm³and nickel with ₀= 0.44 and 0.32 g/cm³. In the case of aluminum, all results are obtained for the first time ever. The range of pressure being investigated is from 0.25 to 76 GPa. For nickel, a shock adiabat is found with the porosity m= ₀/₀₀= 28 (which is the highest porosity for metals) and an adiabat with m= 20 at a pressure of 92 GPa, which is approximately twice the respective values obtained previously. Comparison is made with the results of other researchers.     

Anisotropic Electrical Transport in MgB2 Single Crystals

We report on study of transport properties of MgB₂ single crystals. The normal state resistivity has been found to be anisotropic with resistivity ratio _c / _ab =3.5. In agreement with the results of band structure calculations the normal state Hall effect measurements with H//ab-planes and H//c-axis show two type carrier behavior. Below T _c, the in-plane as well as the out-of-plane Hall resistivity, _xy and _zx , display no sign change anomaly. Furthermore, both _xy and _zx have been found to scale with corresponding longitudinal resistivity with the same exponent =1.5.     

Equation of State and Thermodynamic Properties of Pure D2O and D2O + H2O Mixtures in and Beyond the Critical Region

A parametric crossover model is adapted to represent the thermodynamic properties of pure D₂O in the extended critical region. The crossover equation of state for D₂O incorporates scaling laws asymptotically close to the critical point and is transformed into a regular classical expansion far from the critical point. An isomorphic generalization of the law of corresponding states is applied to the prediction of thermodynamic properties and the phase behavior of D₂O + H₂O mixtures over a wide region around the locus of vapor-liquid critical points. A comparison is made with experimental data for pure D₂O and for the D₂O + H₂O mixture. The equation of state yields a good representation of thermodynamic property data in the range of temperatures 0.8T _c(x)T1.5T _c(x) and densities 0.35_c(x)1.65_c(x).     

Voltage-current characteristics of a type-II superconductor placed in a transverse magnetic field

We have measured the voltageV appearing along a type-II superconducting sample carrying a longitudinal currentI in the presence of a transverse magnetic fieldH. The analysis of the nonlinear part ofV(I) curves does not verify the recent model of Sherrill and Payne. The linear part ofV(I) curves shows that the flux-flow resistivity _f is exponential inH nearH _c2, as Axt and Joiner found. We estimated the parameter =(H _c2/_n)(d_f/dH)_{H=H c2} as a function of the reduced temperature and have compared it to some of the existing theories.     

Effects of phase fluctuation on a mixture of rotating superfluids

It is shown that if the root-mean-square of the gradient of the phase fluctuation of either of the components exceeds the corresponding inverse of the coherence length or if the chemical potential exceeds ₁ ⁰ or ₂ ⁰ , where is the volume integrals of the interaction function between the components, and ₁ ⁰ , ₂ ⁰ are the densities of the two components, the mixture of two rotating superfluids has an instability.     

Second virial coefficients in closed form for a Kihara (2m-m)-potential

In the literature second virial coefficients are calculated by series expansions or by direct numerical integration. For thermodynamic quantities such as thermodynamic functions, analytical expressions are wanted. This paper gives closed formulas for the second virial coefficient for a convex-body Kihara potential of the type U()= U ₀[( ₀/)_2m -2( ₀/) ^m ], where m can be a rational number n>3. Furthermore, a number of related problems such as dielectric virial coefficients and Buckingham-Pople integrals are reduced to the same Laplace-transformation-type technique.     

Hall-Effect in LuNi2B2C and YNi2B2C Borocarbides in Normal and Superconducting Mixed States

It was shown that the Hall resistivity _xy for LuNi ₂ B ₂ C and YNi ₂ B ₂ C is negative in the normal and mixed states and has no sign reversal below T _c . In the mixed state the scaling relation _{xy xx} (_xx is the longitudinal resistivity) was found for both compounds with 2.0. In the normal state a distinct nonlinearity in the _xy(H) dependence, accompanied by a large magnetoresistance, was found below 40 K only for LuNi ₂ B ₂ C. The difference in the behaviour of Lu- and Y-based borocarbides seems to be connected with the difference in the Fermi surfaces of these compounds.     

Spin Gap and Hole Pairing of Sr14−x A x Cu24O41(A = Ca and La) Single Crystals Studied by the Electrical Resistivity and Thermal Conductivity

We have measured the electrical resistivity and the thermal conductivity of Sr _14–x A _x Cu ₂₄ O ₄₁(A = Ca and La) single crystals. The Arrhenius plot of ln vs T ^–1 gives two kinds of activation energy with a boundary temperature T . The activation energy at T < T is in approximate agreement with the spin gap in the ladder estimated from the NMR measurements, suggesting that holes in the ladder are paired and localized at T < T. The observed has been analyzed to be composed of _ph , _spin and _hole due to phonons, spins and holes, respectively. The _ph exhibits a small peak at 30 K in every direction of every single-crystal. The contribution of _spin is observed along the c-axis except for x(Ca) 6, and the spin gap, which corresponds to the spin excitation from spin-singlet to spin-triplet, has been estimated to be 420 K. For x(Ca) 6, the spin gap, which corresponds to the destruction of spin-singlet pairs i. e. the dissociation of hole pairs, has been estimated from along the c-axis at T > T to decrease with increasing x(Ca).     

Influence of Saffman's lift force on the motion of a particle in a Couette layer

The article is concerned with the study of the effect of E. S. Asmolov's corrections to Saffman's lift force for the wall vicinity and a nonzero ratio of Reynolds numbers. It is shown in what way these corrections change the particle paths in a Couette layer and the conditions of deposition.Notation x=X/D, y=Y/D dimensionless longitudinal and transverse coordinates - u=U _p /U , =V _p /U dimensionless projections of particle velocity on the longitudinal and transverse axes - =tU /D dimensionless time - U ²/(18D) Stokes number - = _g / _p , coefficient of the gas kinematic viscosity - particle diameter - /D - _g , _p densities of the gas and particle material - du/d - dv/d - P _s Saffman's force - C coefficient in the formula for Saffman's force - yRe _d ^1/2 - A v _r Re _d ^1/2 - 3.08 - Re V _r / - Re _k ²/)U _g /Y - A Re/Re _k ^1/2 - Re _d U D/ - V _r ((U _g –U _p )²+V _p ² )^1/2 Indices g refers to gas parameters - p refers to the parameters of particles - 0 at the time momentt=0 - S Saffman's force - k Reynolds number based on the velocity gradient - based on velocity - r relative velocity - x projection on thex axis     

Precise measurements of critical parameters of sulfur hexafluoride by laser interferometry

A laser interferometry has been applied, in the present study, for determination of the critical temperature and critical exponents of sulfur hexafluoride (SF₆). By means of laser holographic technique by real-time method, a series of Fraunhofer diffraction patterns due to the density fluctuation of the sample fluid in the very vicinity of the critical point has been successively photographed and analyzed. A dual-thermostat system which was designed and constructed for the present purpose has made the sample temperature constant within 15 K for several days. We have obtained 107 data for ( _L– _v)/ _c along the vapor-liquid coexistence curve in the reduced temperature range 10^–6¦T ^*¦7×10^–5 and additional 34 data for the isothermal compressibility in the single phase region. By analyzing these measurements with the aid of the simple power law, the critical temperature and the critical exponents of SF₆ have been determined as T _c=318.708±0.001 K, =0.350±0.004, and =1.24±0.02, respectively.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

A modified Weibull treatment for the analysis of strength-test data from non-identical brittle specimens

Powder compacts (e.g., pharmaceutical tablets) manufactured on commerically available machines are not strictly identical but show inevitable variability in their weights, thicknesses and compaction pressures. Consequently, the variability in fracture-stress data obtained from such brittle specimens is greater than that due to the inherent strength variability of the material itself. A modified Weibull analysis has been developed so that a more accurate estimate of the inherent variability of the mechanical strength of the material can be derived from test data obtained from commercially produced compacts; its application is illustrated.Nomenclature D diameter - f() relative frequency of occurrence of specimens with density and volume - F minimization function - i ascending rank number of a fracture stress - m Weibull modulus - N _tot number of specimens in a batch - N() number of specimens with densities in the range to + d and volumes in the range to + d - P _f failure probability - p _u upper punch compaction pressure - t thickness - volume - w weight - W _f fracture load - density - _f fracture stress - ¯ _f mean fracture stress of a batch - ¯ _f() mean fracture stress of specimens with density and volume - ₀ scale parameter or normalizing factor - _u location parameter or threshold stress     

Resistivity as a function of composition in the superconducting Nb-Pt A15 phase

The electrical resistivity of the A15 compound Nb_100–x Pt _x (20x28.9) is measured as a function of compositionx from room temperature to the superconducting transition temperatureT _c The residual resistivity ₀ is observed to be nearly independent of composition on the Nb-rich side of stoichiometry, but strongly dependent on the Pt-rich side. A closeT _c correlation with the resistivity sloped/dT at high temperatures and with the electronic specific heat coefficient , which are proportional to the superconducting coupling parameter , is noted. The results can be understood in terms of an order-disorder model.