Strong Coupling of MoS2 Nanosheets and Nitrogen‐Doped Graphene for High‐Performance Pseudocapacitance Lithium Storage

Layered material MoS₂ is widely applied as a promising anode for lithium‐ion batteries (LIBs). Herein, a scalable and facile dopamine‐assisted hydrothermal technique for the preparation of strongly coupled MoS₂ nanosheets and nitrogen‐doped graphene (MoS₂/N‐G) composite is developed. In this composite, the interconnected MoS₂ nanosheets are well wrapped onto the surface of graphene, forming a unique veil‐like architecture. Experimental results indicate that dopamine plays multiple roles in the synthesis: a binding agent to anchor and uniformly disperse MoS₂ nanosheets, a morphology promoter, and the precursor for in situ nitrogen doping during the self‐polymerization process. Density functional theory calculations further reveal that a strong interaction exists at the interface of MoS₂ nanosheets and nitrogen‐doped graphene, which facilitates the charge transfer in the hybrid system. When used as the anode for LIBs, the resulting MoS₂/N‐G composite electrode exhibits much higher and more stable Li‐ion storage capacity (e.g., 1102 mAh g^?1 at 100 mA g^?1) than that of MoS₂/G electrode without employing the dopamine linker. Significantly, it is also identified that the thin MoS₂ nanosheets display outstanding high‐rate capability due to surface‐dominated pseudocapacitance contribution.     

Scalable 2D Mesoporous Silicon Nanosheets for High‐Performance Lithium‐Ion Battery Anode

Constructing unique mesoporous 2D Si nanostructures to shorten the lithium‐ion diffusion pathway, facilitate interfacial charge transfer, and enlarge the electrode–electrolyte interface offers exciting opportunities in future high‐performance lithium‐ion batteries. However, simultaneous realization of 2D and mesoporous structures for Si material is quite difficult due to its non‐van der Waals structure. Here, the coexistence of both mesoporous and 2D ultrathin nanosheets in the Si anodes and considerably high surface area (381.6 m² g^?1) are successfully achieved by a scalable and cost‐efficient method. After being encapsulated with the homogeneous carbon layer, the Si/C nanocomposite anodes achieve outstanding reversible capacity, high cycle stability, and excellent rate capability. In particular, the reversible capacity reaches 1072.2 mA h g^?1 at 4 A g^?1 even after 500 cycles. The obvious enhancements can be attributed to the synergistic effect between the unique 2D mesoporous nanostructure and carbon capsulation. Furthermore, full‐cell evaluations indicate that the unique Si/C nanostructures have a great potential in the next‐generation lithium‐ion battery. These findings not only greatly improve the electrochemical performances of Si anode, but also shine some light on designing the unique nanomaterials for various energy devices.     

Novel 2D Layered Molybdenum Ditelluride Encapsulated in Few‐Layer Graphene as High‐Performance Anode for Lithium‐Ion Batteries

Molybdenum ditelluride nanosheets encapsulated in few‐layer graphene (MoTe₂/FLG) are synthesized by a simple heating method using Te and Mo powder and subsequent ball milling with graphite. The as‐prepared MoTe₂/FLG nanocomposites as anode materials for lithium‐ion batteries exhibit excellent electrochemical performance with a highly reversible capacity of 596.5 mAh g^?1 at 100 mA g^?1, a high rate capability (334.5 mAh g^?1 at 2 A g^?1), and superior cycling stability (capacity retention of 99.5% over 400 cycles at 0.5 A g^?1). Ex situ X‐ray diffraction and transmission electron microscopy are used to explore the lithium storage mechanism of MoTe₂. Moreover, the electrochemical performance of a MoTe₂/FLG//0.35Li₂MnO₃·0.65LiMn_0.5Ni_0.5O₂ full cell is investigated, which displays a reversible capacity of 499 mAh g^?1 (based on the MoTe₂/FLG mass) at 100 mA g^?1 and a capacity retention of 78% over 50 cycles, suggesting the promising application of MoTe₂/FLG for lithium‐ion storage. First‐principles calculations exhibit that the lowest diffusion barrier (0.18 eV) for lithium ions along pathway III in the MoTe₂ layered structure is beneficial for improving the Li intercalation/deintercalation property.     

Graphene Caging Silicon Particles for High‐Performance Lithium‐Ion Batteries

Silicon holds great promise as an anode material for lithium‐ion batteries with higher energy density; its implication, however, is limited by rapid capacity fading. A catalytic growth of graphene cages on composite particles of magnesium oxide and silicon, which are made by magnesiothermic reduction reaction of silica particles, is reported herein. Catalyzed by the magnesium oxide, graphene cages can be conformally grown onto the composite particles, leading to the formation of hollow graphene‐encapsulated Si particles. Such materials exhibit excellent lithium storage properties in terms of high specific capacity, remarkable rate capability (890 mAh g^?1 at 5 A g^?1), and good cycling retention over 200 cycles with consistently high coulombic efficiency at a current density of 1 A g^?1. A full battery test using LiCoO₂ as the cathode demonstrates a high energy density of 329 Wh kg^?1.     

Synergistic Effect of Aligned Graphene Nanosheets in Graphene Foam for High‐Performance Thermally Conductive Composites

Graphene shows a great potential for high‐performance thermally conductive composite applications because of its extremely high thermal conductivity. However, the graphene‐based polymer composites reported so far only have a limited thermal conductivity, with the highest thermal conductivity enhancement (TCE) per 1 vol% graphene less than 900%. Here, a continuous network of graphene foam (GF), filled with aligned graphene nanosheets (GNs), is shown to be an ideal filler structure for thermally conductive composite materials. Compared to previous reports, a clear thermal percolation is observed at a low graphene loading fraction. The GNs/GF/natural rubber composite shows the highest TCE of 8100% (6.2 vol% graphene loading) ever reported at room temperature, which gives a record‐high TCE per 1 vol% graphene of 1300%. Further analyses reveal a significant synergistic effect between the aligned GNs and 3D interconnected GF, which plays a key role in the formation of a thermal percolation network to remarkably improve the thermal conductivity of the composites. Additionally, the use of this composite for efficient heat dissipation of light‐emitting diode (LED) lamps is demonstrated. These findings provide valuable guidance to design high‐performance graphene‐based thermally conductive materials, and open up the possibility for the use of graphene in high‐power electronic devices.     

Ultrathin 2D Mesoporous TiO2/rGO Heterostructure for High‐Performance Lithium Storage

Lithium‐ion batteries (LIBs) have been widely applied and studied as an effective energy supplement for a variety of electronic devices. Titanium dioxide (TiO₂), with a high theoretical capacity (335 mAh g^?1) and low volume expansion ratio upon lithiation, has been considered as one of the most promising anode materials for LIBs. However, the application of TiO₂ is hindered by its low electrical conductivity and slow ionic diffusion rate. Herein, a 2D ultrathin mesoporous TiO₂/reduced graphene (rGO) heterostructure is fabricated via a layer‐by‐layer assembly process. The synergistic effect of ultrathin mesoporous TiO₂ and the rGO nanosheets significantly enhances the ionic diffusion and electron conductivity of the composite. The introduced 2D mesoporous heterostructure delivers a significantly improved capacity of 350 mAh g^?1 at a current density of 200 mA g^?1 and excellent cycling stability, with a capacity of 245 mAh g^?1 maintained over 1000 cycles at a high current density of 1 A g^?1. The in situ transmission electron microscopy analysis indicates that the volume of the as‐prepared 2D heterostructures changes slightly upon the insertion and extraction of Li⁺, thus contributing to the enhanced long‐cycle performance.     

Few‐Layered Tin Sulfide Nanosheets Supported on Reduced Graphene Oxide as a High‐Performance Anode for Potassium‐Ion Batteries

Anodes involving conversion and alloying reaction mechanisms are attractive for potassium‐ion batteries (PIBs) due to their high theoretical capacities. However, serious volume change and metal aggregation upon potassiation/depotassiation usually cause poor electrochemical performance. Herein, few‐layered SnS₂ nanosheets supported on reduced graphene oxide (SnS₂@rGO) are fabricated and investigated as anode material for PIBs, showing high specific capacity (448 mAh g^?1 at 0.05 A g^?1), high rate capability (247 mAh g^?1 at 1 A g^?1), and improved cycle performance (73% capacity retention after 300 cycles). In this composite electrode, SnS₂ nanosheets undergo sequential conversion (SnS₂ to Sn) and alloying (Sn to K₄Sn₂₃, KSn) reactions during potassiation/depotassiation, giving rise to a high specific capacity. Meanwhile, the hybrid ultrathin nanosheets enable fast K storage kinetics and excellent structure integrity because of fast electron/ionic transportation, surface capacitive‐dominated charge storage mechanism, and effective accommodation for volume variation. This work demonstrates that K storage performance of alloy and conversion‐based anodes can be remarkably promoted by subtle structure engineering.     

Graphene Aerogels with Anchored Sub‐Micrometer Mulberry‐Like ZnO Particles for High‐Rate and Long‐Cycle Anode Materials in Lithium Ion Batteries

Graphene aerogels (GAs) anchoring hierarchical, mulberry‐like ZnO particles are fabricated in situ using a one‐step solvothermal reaction. The resulting composites can function as anodes in lithium ion batteries, where they exhibit a high capacity and cyclic stability. The reversible capacities obtained are 365, 320, and 230 mA h g^?1 at current densities of 1, 2, and 10 A g^?1. Their high reversible capacity is 445 mA h g^?1 at a current density of 1.6 A g^?1; this value is maintained even after the 500th cycle, The excellent electrochemical performance is attributed to strong oxygen bridges between ZnO and graphene, where C–O–Zn linkages provide a good pathway for electron transport during charge/discharge cycles. Additionally, the hierarchical structure of the ZnO microballs suppresses stacking among the graphene layers, allowing the GAs to accelerate the transport of lithium ions. Furthermore, the GA framework enhances the electrical conductivity and buffer any volume expansion.     

Graphene‐Analogues Boron Nitride Nanosheets Confining Ionic Liquids: A High‐Performance Quasi‐Liquid Solid Electrolyte

Solid electrolytes are one of the most promising electrolyte systems for safe lithium batteries, but the low ionic conductivity of these electrolytes seriously hinders the development of efficient lithium batteries. Here, a novel class of graphene‐analogues boron nitride (g‐BN) nanosheets confining an ultrahigh concentration of ionic liquids (ILs) in an interlayer and out‐of‐layer chamber to give rise to a quasi‐liquid solid electrolyte (QLSE) is reported. The electron‐insulated g‐BN nanosheet host with a large specific surface area can confine ILs as much as 10 times of the host's weight to afford high ionic conductivity (3.85 × 10^?3 S cm^?1 at 25 °C, even 2.32 × 10^?4 S cm^?1 at ?20 °C), which is close to that of the corresponding bulk IL electrolytes. The high ionic conductivity of QLSE is attributed to the enormous absorption for ILs and the confining effect of g‐BN to form the ordered lithium ion transport channels in an interlayer and out‐of‐layer of g‐BN. Furthermore, the electrolyte displays outstanding electrochemical properties and battery performance. In principle, this work enables a wider tunability, further opening up a new field for the fabrication of the next‐generation QLSE based on layered nanomaterials in energy conversion devices.