A quantum mechanical mobility model for scaled NMOS transistors with ultra-thin high-K dielectrics and metal gate electrodes

A quantum mechanical model of electron mobility for scaled NMOS transistors with ultra-thin SiO₂/HfO₂ dielectrics (effective oxide thickness is less than 1 nm) and metal gate electrode is presented in this paper. The inversion layer carrier density is calculated quantum mechanically due to the consideration of high transverse electric field created in the transistor channel. The mobility model includes: (1) Coulomb scattering effect arising from the scattering centers at the semiconductor–dielectric interface, fixed charges in the high-K film and bulk impurities, and (2) surface roughness effect associated with the semiconductor–dielectric interface. The model predicts the electron mobility in MOS transistors will increase with continuous dielectric layer scaling and a fixed volume trap density assumption in high-K film. The Coulomb scattering mobility dependence on the interface trap density, fixed charges in the high-K film, interfacial oxide layer thickness and high-K film thickness is demonstrated in the paper.     

A physical model on electron mobility in InGaAs nMOSFETs with stacked gate dielectric

An inversion-channel electron mobility model for InGaAs n-channel metal–oxide-semiconductor field-effect transistors (nMOSFETs) with stacked gate dielectric is established by considering scattering mechanisms of bulk scattering, Coulomb scattering of interface charges, interface-roughness scattering, especially remote Coulomb scattering and remote interface-roughness scattering. The simulation results are in good agreement with the experimental data. The effects of device parameters on degradation of electron mobility, e.g. interface roughness, dielectric constant and thickness of high-k layer/interlayer, and the doping concentration in the channel, are discussed. It is revealed that a tradeoff among the device parameters has to be performed to get high electron mobility with keeping good other electrical properties of devices.     

High work-function metal gate and high-/spl kappa/ dielectrics for charge trap flash memory device applications

We report the impact of high work-function (/spl Phi//sub M/) metal gate and high-/spl kappa/ dielectrics on memory properties of NAND-type charge trap Flash (CTF) memory devices. In this paper, theoretical and experimental studies show that high /spl Phi//sub M/ gate and high permittivity (high-/spl kappa/) dielectrics play a key role in eliminating electron back tunneling though the blocking dielectric during the erase operation. Techniques to improve erase efficiency of CTF memory devices with a fixed metal gate by employing various chemicals and structures are introduced and those mechanisms are discussed. Though process optimization of high /spl Phi//sub M/ gate and high-/spl kappa/ materials, enhanced CTF device characteristics such as high speed, large memory window, and good reliability characteristics of the CTF devices are obtained.     

Intrinsic mobility evaluation of high-/spl kappa/ gate dielectric transistors using pulsed I/sub d/-V/sub g/

A novel intrinsic mobility extraction methodology for high-/spl kappa/ gate stacks that only requires a capacitance-voltage and pulsed I/sub d/-V/sub g/ measurement is demonstrated on SiO/sub 2/ and high-/spl kappa/ gate dielectric transistors and is benchmarked to other reported mobility extraction techniques. Fast transient charging effects in high-/spl kappa/ gate stacks are shown to cause the mobility extracted using conventional dc-based techniques to be lower than the intrinsic mobility.     

Gate-first Germanium nMOSFET with CVD HfO/sub 2/ gate dielectric and silicon surface passivation

A gate-first self-aligned Ge n-channel MOSFET (nMOSFET) with chemical vapor deposited (CVD) high-/spl kappa/ gate dielectric HfO/sub 2/ was demonstrated. By tuning the thickness of the ultrathin silicon-passivation layer on top of the germanium, it is found that increasing the silicon thickness helps to reduce the hysteresis, fixed charge in the gate dielectric, and interface trap density at the oxide/semiconductor interface. About 61% improvement in peak electron mobility of the Ge nMOSFET with a thick silicon-passivation layer over the CVD HfO/sub 2//Si system was achieved.     

Low-frequency noise in TaSiN/HfO/sub 2/ nMOSFETs and the effect of stress-relieved preoxide interfacial layer

Low-frequency noise characteristics are reported for TaSiN-gated n-channel MOSFETs with atomic-layer deposited HfO/sub 2/ on thermal SiO/sub 2/ with stress-relieved preoxide (SRPO) pretreatment. For comparison, control devices were also included with chemical SiO/sub 2/ resulting from standard Radio Corporation of America clean process. The normalized noise spectral density values for these devices are found to be lower when compared to reference poly Si gate stack with similar HfO/sub 2/ dielectric. Consequently, a lower oxide trap density of /spl sim/4/spl times/10/sup 17/ cm/sup -3/eV/sup -1/ is extracted compared to over 3/spl times/10/sup 18/ cm/sup -3/eV/sup -1/ values reported for poly Si devices indicating an improvement in the high-/spl kappa/ and interfacial layer quality. In fact, this represents the lowest trap density values reported to date on HfO/sub 2/ MOSFETs. The peak electron mobility measured on the SRPO devices is over 330 cm/sup 2//V/spl middot/s, much higher than those for equivalent poly Si or metal gate stacks. In addition, the devices with SRPO SiO/sub 2/ are found to exhibit at least /spl sim/10% higher effective mobility than RCA devices, notwithstanding the differences in the high-/spl kappa/ and interfacial layer thicknesses. The lower Coulomb scattering coefficient obtained from the noise data for the SRPO devices imply that channel carriers are better screened due to the presence of SRPO SiO/sub 2/, which, in part, contributes to the mobility improvement.     

High-/spl kappa//metal-gate stack and its MOSFET characteristics

We show experimental evidence of surface phonon scattering in the high-/spl kappa/ dielectric being the primary cause of channel electron mobility degradation. Next, we show that midgap TiN metal-gate electrode is effective in screening phonon scattering in the high-/spl kappa/ dielectric from coupling to the channel under inversion conditions, resulting in improved channel electron mobility. We then show that other metal-gate electrodes, such as the ones with n+ and p+ work functions, are also effective in improving channel mobilities to close to those of the conventional SiO/sub 2//poly-Si stack. Finally, we demonstrate this mobility degradation recovery translates directly into high drive performance on high-/spl kappa//metal-gate CMOS transistors with desirable threshold voltages.     

Selection of rare earth silicates for highly scaled gate dielectrics

An aggressive equivalent oxide thickness (EOT) scaling with high-k gate dielectrics has been demonstrated by ultra-thin La₂O₃ gate dielectric with a proper selection of rare earth (La-, Ce- and Pr-) silicates as an interfacial layer. Among silicates, Ce-silicate has shown the lowest interface-state density as low as 10¹¹ cmv⁻²/eV with a high dielectric constant over 20. n-Type field-effect transistor (FET) with a small EOT of 0.51 nm has been successfully fabricated with a La₂O₃ gate dielectric on a Ce-silicate interfacial layer after annealing at 500 °C. Negative shift in threshold voltage and reduced effective electron mobility has indicated the presence of fixed charges in the dielectric. Nonetheless, the high dielectric constant and nice interfacial property of Ce-silicate can be advantageous for the interfacial layer in highly scaled gate dielectrics.     

Impact of the interfacial layer on the low-frequency noise (1/f) behavior of MOSFETs with advanced gate stacks

The impact of the interfacial layer thickness on the low-frequency (LF) noise (1/f noise) behavior of n- and p-channel MOSFETs with high-/spl kappa/ gate dielectrics and metal gates is investigated. Decreasing the interfacial layer thickness from 0.8 to 0.4 nm affects the 1/f noise in two ways. 1) The mobility fluctuations mechanism becomes the main source of 1/f noise not only on pMOS devices, as usually observed, but also on nMOS devices. 2) A significant increase of the Hooge's parameter is observed for both types of MOSFETs. These experimental findings indicate that bringing the high-/spl kappa/ layer closer to the Si-SiO/sub 2/ interface enhances the 1/f noise mainly due to mobility fluctuations.     

Modeling of charge trapping induced threshold-voltage instability in high-/spl kappa/ gate dielectric FETs

The authors have developed a distributed tunneling model to investigate the threshold-voltage instability induced by charge trapping in field-effect transistors (FETs) using high-/spl kappa/ gate dielectric materials. The charge trapping dynamics in the high-/spl kappa/ layer are modeled based on a rate equation, which is self-consistently incorporated into device-level simulations. The model is used to simulate pulsed operation of HfO/sub 2/ based n-type FETs; good agreement is obtained with pulsed measurements including the dependence of the threshold-voltage shift on pulse heights and durations. The trap-energy-level shift due to the polaron effect is found to be critical to model the pulse-height dependence of the threshold-voltage shift.     

Electrical performance and reliability improvement by using compositionally varying bi-Layer structure of PVD HfSi/sub x/O/sub y/ dielectric

The effect of a bi-layer structure by varying the Hf composition in Hf-silicate dielectric in improving the electrical performance and reliability of high-/spl kappa/ gate stack n-MOSFETs has been investigated. Introducing Hf-silicate with 19.5% of Hf composition at the bottom layer and 28.5% of Hf on the top of it reduces the leakage current dramatically, while it minimally sacrifices increase in equivalent oxide thickness. Moreover, the structure reduces defect generation rate under gate injection and improves breakdown voltage in comparison to the control samples. Increase in Si-O bonds at the bottom interface, decrease in Coulomb scattering, and increase in dielectric constant in the top layer have been attributed to the overall performance increase of the gate stack.     

Improved device performance and reliability in high /spl kappa/ HfTaTiO gate dielectric with TaN gate electrode

The device performance and reliability of higher-/spl kappa/ HfTaTiO gate dielectrics have been investigated in this letter. HfTaTiO dielectrics have been reported to have a high-/spl kappa/ value of 56 and acceptable barrier height relative to Si (1.0 eV). Through process optimization, an ultrathin equivalent oxide thickness (EOT) (/spl sim/9 /spl Aring/) has been achieved. HfTaTiO nMOSFET characteristics have been studied as well. The peak mobility of HfTaTiO is 50% higher than that of HfO/sub 2/ and its high field mobility is comparable to that of HfSiON with an intentionally grown SiO/sub 2/ interface, indicative of superior quality of the interface and bulk dielectric. In addition, HfTaTiO dielectric has a reduced stress-induced leakage current (SILC) and improved breakdown voltage compared to HfO/sub 2/ dielectric.     

High mobility,low voltage polymer transistor

We introduce a polymer transistor that operates with low supply voltage and yet has a field-effect mobility higher than the mobilities reported for low voltage polymer transistors. A simple plasma oxidation of the gate metal to form a thin (3.74 nm) top metal oxide layer in the gate metal is involved in the fabrication that acts as the gate dielectric. With ultrathin gate dielectrics, the variation in the dielectric thickness and the surface roughness scattering can severely limit the mobility attainable. The plasma oxidation under certain conditions produces a very smooth oxide surface, leading to the high mobility.     

Characterization of accumulation layer capacitance for extracting data on high-/spl kappa/ gate dielectrics

A new parameter extraction technique has been outlined for high-/spl kappa/ gate dielectrics that directly yields values of the dielectric capacitance C/sub di/, the accumulation layer surface potential quotient, /spl beta//sub acc/, the flat-band voltage, the surface potential /spl phi//sub s/, the dielectric voltage, the channel doping density and the interface charge density at flat-band. The parallel capacitance, C/sub p/(=C/sub sc/+C/sub it/), was found to be an exponential function of /spl phi//sub s/ in the strong accumulation regime, for seven different high-/spl kappa/ gate dielectrics. The slope of the experimental lnC/sub p/(/spl phi//sub s/) plot, i.e., |/spl beta//sub acc/|, was found to depend strongly on the physical properties of the high-/spl kappa/ dielectric, i.e., was inversely proportional to [(/spl phi//sub b/m/sup *//m)/sup 1/2/K/C/sub di/], where /spl phi//sub b/ is the band offset, and m/sup */ is the effective tunneling mass. Extraction of /spl beta//sub acc/ represented an experimental carrier confinement index for the accumulation layer and an experimental gate-dielectric direct-tunneling current index. /spl beta//sub acc/ may also be an effective tool for monitoring the effects of post-deposition annealing/processing.     

Accumulation gate capacitance of MOS devices with ultrathin high-/spl kappa/ gate dielectrics: modeling and characterization

A quantum-mechanical (QM) model is presented for accumulation gate capacitance of MOS structures with high-/spl kappa/ gate dielectrics. The model incorporates effects due to penetration of wave functions of accumulation carriers into the gate dielectric. Excellent agreement is obtained between simulation and experimental C-V data. It is found that the slope of the C-V curves in weak and moderate accumulation as well as gate capacitance in strong accumulation varies from one dielectric material to another. Inclusion of penetration effect is essential to accurately describe this behavior. The physically based calculation shows that the relationship between the accumulation semiconductor capacitance and Si surface potential may be approximated by a linear function in moderate accumulation. Using this relationship, a simple technique to extract dielectric capacitance for high-/spl kappa/ gate dielectrics is proposed. The accuracy of the technique is verified by successfully applying the method to a number of different simulated and experimental C-V characteristics. The proposed technique is also compared with another method available in the literature. The improvements made in the proposed technique by properly incorporating QM and other physical effects are clearly demonstrated.     

Physically based quantum-mechanical compact model of MOS devices substrate-injected tunneling current through ultrathin (EOT /spl sim/ 1 nm) SiO/sub 2/ and high-/spl kappa/ gate stacks

Building on a previously presented compact gate capacitance (C/sub g/-V/sub g/) model, a computationally efficient and accurate physically based compact model of gate substrate-injected tunneling current (I/sub g/-V/sub g/) is provided for both ultrathin SiO/sub 2/ and high-dielectric constant (high-/spl kappa/) gate stacks of equivalent oxide thickness (EOT) down to /spl sim/ 1 nm. Direct and Fowler-Nordheim tunneling from multiple discrete subbands in the strong inversion layer are addressed. Subband energies in the presence of wave function penetration into the gate dielectric, charge distributions among the subbands subject to Fermi-Dirac statistics, and the barrier potential are provided from the compact C/sub g/-V/sub g/ model. A modified version of the conventional Wentzel-Kramer-Brillouin approximation allows for the effects of the abrupt material interfaces and nonparabolicities in complex band structures of the individual dielectrics on the tunneling current. This compact model produces simulation results comparable to those obtained via computationally intense self-consistent Poisson-Schro/spl uml/dinger simulators with the same MOS devices structures and material parameters for 1-nm EOTs of SiO/sub 2/ and high-/spl kappa//SiO/sub 2/ gate stacks on (100) Si, respectively. Comparisons to experimental data for MOS devices with metal and polysilicon gates, ultrathin dielectrics of SiO/sub 2/, Si/sub 3/N/sub 4/, and high-/spl kappa/ (e.g., HfO/sub 2/) gate stacks on (100) Si with EOTs down to /spl sim/ 1-nm show excellent agreement.     

High-performance poly-silicon TFTs using HfO/sub 2/ gate dielectric

High-performance low-temperature poly-Si thin-film transistors (TFTs) using high-/spl kappa/ (HfO/sub 2/) gate dielectric is demonstrated for the first time. Because of the high gate capacitance density and thin equivalent-oxide thickness contributed by the high-/spl kappa/ gate dielectric, excellent device performance can be achieved including high driving current, low subthreshold swing, low threshold voltage, and high ON/OFF current ratio. It should be noted that the ON-state current of high-/spl kappa/ gate-dielectric TFTs is almost five times higher than that of SiO/sub 2/ gate-dielectric TFTs. Moreover, superior threshold-voltage (V/sub th/) rolloff property is also demonstrated. All of these results suggest that high-/spl kappa/ gate dielectric is a good choice for high-performance TFTs.     

Highly manufacturable advanced gate-stack technology for sub-45-nm self-aligned gate-first CMOSFETs

Issues surrounding the integration of Hf-based high-/spl kappa/ dielectrics with metal gates in a conventional CMOS flow are discussed. The careful choice of a gate-stack process as well as optimization of other CMOS process steps enable robust metal/high-/spl kappa/ CMOSFETs with wide process latitude. HfO/sub 2/ of a 2-nm physical thickness shows a very minimal transient charge trapping resulting from kinetically suppressed crystallization. Thickness of metal electrode is also a critical factor to optimize physical-stress effects and minimize dopant diffusion. A high-temperature anneal after source/drain implantation in a conventional CMOSFET process is found to reduce the interface state density and improve the electron mobility. Even though MOSFET process using single midgap metal gate addresses fundamental issues related to implementing metal/high-/spl kappa/ stack, integrating two different metals on the same wafer (i.e., dual metal gate) poses several additional challenges, such as metal gate separation between n- and pMOS and gate-stack dry etch. We demonstrate that a dual metal gate CMOSFET yields high-performance devices even with a conventional gate-first approach if an appropriate metal separation between band-edge metal for nMOS and pMOS is incorporated. Optimization of dry-etch process enables gentle and complete removal of two different metal gate stacks on ultrathin high-/spl kappa/ layer.     

Nanoscale germanium MOS Dielectrics-part II: high-/spl kappa/ gate dielectrics

In this paper, atomic layer deposition (ALD) and ultraviolet ozone oxidation (UVO) of zirconium and hafnium oxides are investigated for high-/spl kappa/ dielectric preparation in Ge MOS devices from the perspectives of thermodynamic stability and electrical characteristics. Prior to performing these deposition processes, various Ge surface preparation schemes have been examined to investigate their effects on the resulting electrical performance of the Ge MOS capacitors. Interfacial layer-free ALD high-/spl kappa/ growth on Ge could be obtained; yet, insertion of a stable interfacial layer greatly enhanced the electrical characteristics but with a compromise for equivalent dielectric thickness scalability. On the other hand, interfacial layer-free UVO high-/spl kappa/ growth on Ge was demonstrated with minimal capacitance-voltage hysteresis and sub-1.0-nm capacitance equivalent thickness. Finally, the leakage conduction and scalability of these nanoscale Ge MOS dielectrics are discussed and are shown to outperform their Si counterparts.     

Charge trapping and detrapping characteristics in hafnium silicate gate stack under static and dynamic stress

The V/sub th/ instability of nMOSFET with HfSiON gate dielectric under various stress conditions has been evaluated. It is shown that after constant voltage stress, the threshold voltage (V/sub th/) relaxes to its initial prestress value. The relaxation rate is strongly affected by the stress duration and magnitude rather than injected charge flux or magnitude of the V/sub th/ shift. It is proposed that spatial distribution of trapped charges, which is strongly affected by the stress conditions, determines the relaxation rate. The implications of the electron trapping/detrapping processes on electrical evaluation of the high-/spl kappa/ gate dielectrics are discussed.