Novel amphiphilic temperature responsive graft copolymers PCL-<Emphasis Type="Italic">g</Emphasis>-P(MEO<Subscript>2</Subscript>MA-<Emphasis Type="Italic">co</Emphasis>-OEGMA) via a combination of ROP and ATRP: synthesis,characterization, and sol-gel transition

A series of well-defined novel amphiphilic temperature-responsive graft copolymers containing PCL analogues P(αClεCL-co-εCL) as the hydrophobic backbone, and the hydrophilic side-chain PEG analogues P(MEO₂MA-co-OEGMA), designated as P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) have been prepared via a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The composition and structure of these copolymers were characterized by ¹H NMR and GPC analyses. The self-assembly behaviors of these amphiphilic graft copolymers were investigated by UV transmittance, a fluorescence probe method, dynamic light scattering (DLS) and transmission electron microscopy (TEM) analyses. The results showed that the graft copolymers exhibited the good solubility in water, and was given the low critical temperature (LCST) at 35(±1) °C, which closed to human physiological temperature. The critical micelle concentrations (CMC) of P(αClεCL-co-εCL)-g-P(MEO₂MA-co-OEGMA) in aqueous solution were investigated to be 2.0 × 10^?3, 9.1 × 10^?4 and 1.5 × 10^?3 mg·mL^?1, respectively. The copolymer could self-assemble into sphere-like aggregates in aqueous solution with diverse sizes when changing the environmental temperature. The vial inversion test demonstrated that the graft copolymers could trigger the sol-gel transition which also depended on the temperature.     

Synthesis and characterization of thermo-responsive supramolecular diblock copolymers

In this paper, we report the synthesis and characterization of a new thermo-responsive supramolecular amphiphiles diblock copolymer, methoxy poly (ethylene glycol)-block-Poly(N-isopropylacrylamide) (mPEG-b-PNIPAM). The mPEG with β-cyclodextrin (β-CD) group and the PNIPAM with adamantine (AD) group were synthesized, respectively, and mPEG-b-PNIPAM was then obtained by the host-guest inclusion between AD and β-CD. The structure and molecular weight of mPEG-b-PNIPAM was confirmed by ¹H NMR and GPC measurements. At low temperature (T?<?33 °C), the PNIPAM block is hydrophilic. With increasing temperature, the hydrophobicity the of PNIPAM block increases. This molecular feature leads to interesting aggregation behavior of micelles in aqueous solutions at different temperatures. The self-assembly was revealed by UV, DLS measurements, and TEM observations.     

Properties of na‐montmorillonite and cellulose nanocrystal reinforced poly(butyl acrylate‐co‐methyl methacrylate) nanocomposites

Poly(butyl acrylate‐co‐methyl methacrylate) (BA‐co‐MMA) nanocomposite latexes were synthesized in the presence of sodium montmorillonite (Na‐MMT) and cellulose nanocrystal (CNC) as fillers. Nanocomposite preparation with 3 wt% Na‐MMT based upon the total monomer amount was conducted by semi‐batch emulsion polymerization. Furthermore, direct blending of neat copolymer latex with Na‐MMT was performed for comparison. CNC/BA‐co‐MMA nanocomposites were obtained via blending process with varying CNC content (1, 2, and 3 wt %). Good dispersion of both Na‐MMT and CNC within the copolymer matrix was achieved as demonstrated by X‐ray diffraction and transmission electron microscope. Particle size of the nanocomposite latexes was around 120 nm. Thermal, mechanical, and barrier properties of the copolymer showed great improvement with the addition of both Na‐MMT and CNC. CNC nanocomposites displayed enhanced properties with increasing CNC level. Tensile strength of copolymer latex with 3 wt% CNC reached 262.5% of the pristine latex, while tensile strength of Na‐MMT nanocomposite at the same content was 187.5% of the pristine latex. POLYM. ENG. SCI., 55:2922–2928, 2015. © 2015 Society of Plastics Engineers     

Preparation and properties of PET/PA6 copolymer/montmorillonite hybrid nanocomposite

From in situ polycondensation, a poly(ethylene terephthalate)/Polyamide 6 copolymer/montmorillonite nanocomposite was prepared, after the treatment of montmorillonite (MMT) with a water soluble polymer. The resulting nanocomposites were characterized by X‐ray diffraction (XRD), differential scanning calorimeter (DSC), nuclear magnetic resonance (NMR), dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM). The results of DSC, ¹H NMR, and DMA proved that the nanocomposite synthesized was PET/PA6 copolymer/MMT nanocomposite, not the PET/PA6 blend/MMT nanocomposite. The results of XRD and TEM proved that the dispersion of MMT was improved observably after the introduction of PA6 molecular chain into PET. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2512–2517, 2006     

Synthesis of Phytonanocomposite of Zinc Oxide by <Emphasis Type="Italic">Ixora coccinea Linn</Emphasis> for Cancer Treatment

Bioactive peptides from Ixora coccinea Linn flowers have been reported to have anticancer activity against various cancer cells. Zinc oxide nanoparticle is the promising metal nanoparticle for anticancer applications. In the present work, ZnO was synthesized using I. coccinea Linn flower extract. The synthesized ZnO nanoparticle was found as phytonanocomposite of ZnO nanoparticle and bioactive components. The synthesized ZnO phytonanocomposite was confirmed using UV Spectroscopic analysis with maximum wavelength at 357.6 nm. The presence of bioactive peptides in the nanophytocomposite was confirmed using FT-IR analysis with strong peaks at 3402 and 1629 cm^?1. The particle size and surface characteristics of bioactive phytonanocomposite of ZnO was studied using Scanning Electron Microscope. The anticancer activity of zinc oxide nanocomposite of I. coccinea Linn flower extract was found to be efficient on MCF-7 cell line.     

Microwave-assisted green synthesis of hybrid nanocomposite: removal of Malachite green from waste water

Gum xanthan/psyllium-based nanocomposite was prepared by microwave-assisted synthetic method for the removal of toxic Malachite green (MG) dye from aqueous solutions. The nanocomposite was prepared by in situ incorporation of the K₂Zn₃[Fe(CN)₆]·9H₂O nanoparticles into the semi-IPN matrix in the presence of ammonium persulphate and glutaraldehyde as initiator-crosslinker system. Liquid uptake efficacy of the hybrid superabsorbent was enhanced through the optimization of different reaction conditions, including APS = 0.027 mol L^?1; glutaraldehyde = 0.053 × 10^?3 mol L^?1; solvent = 8.0 mL; acrylic acid = 10.928 mol L^?1; pH 7.0; reaction time = 60 s and microwave power = 100 % and its thermal behavior was evaluated using TGA-DTG-DTA technique. Candidate nanocomposite was characterized by FTIR, SEM, XRD and UV–visible spectroscopic methods. Various optimized parameters for the efficient removal (83 %) of the Malachite green were adsorbent dose of 800 mg, 14 mg L^?1 initial dye concentration and contact time of 28 h. Further, Langmuir and Freundlich adsorption isotherms showed good applicability in adsorption process of MG onto the nanocomposite with maximum adsorption efficiency of 3.21 mg g^?1. However, for Freundlich isotherm, R ² was around 0.9947 and value of 1/n was less than 1 for the synthesized nanocomposite which indicated that the Freundlich isotherm was more favorable than Langmuir isotherm model along with its usability for wide range of dye concentrations. The nanocomposite was found to be a potential product for dye removal from waste water and could prove to be a boon for textile sector.     

Properties of water‐soluble acrylic copolymer/montmorillonite nanocomposites for warp sizing

Acrylic copolymer/montmorillonite (MMT) nanocomposites for warp sizing were prepared in the presence of Na⁺‐MMT by the in situ intercalative polymerization of acrylic acid, acrylamide, and methyl acrylate in water solution. The properties of the solution and cast film were tested according to an application in sizing process of the nanocomposite size with various MMT contents. The results indicate that, for an exfoliated structure corresponding to the MMT content increasing to 7 wt %, the performance parameters of solution viscosity, glass‐transition temperature, and tensile strength of the film increased and the moisture sorption, abrasion loss, and elongation at break of the film decreased. When the intercalated structure of MMT was 9 wt %, the gathered MMT layers acted as a common inorganic filler in the copolymer matrix, with limited contribution to the properties of the composite. The adhesion work of the nanocomposite solution was calculated by use of the Young–Dupre relation, which showed maximum values at an MMT content of 3 wt % on the surfaces of both the polyester and cellulose films. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and adsorptive properties of sulfonated nanocomposites based on carbon-encapsulated iron nanoparticles and styrene-p-divinylbenzene copolymer

ABSTRACT

A method of the synthesis of novel magnetic nanocomposite adsorbent of Fe(III) from aqueous solutions is presented. The nanocomposites consisted of carbon-encapsulated iron nanoparticles and styrene-p-divinylbenzene copolymer. The adsorptive active sites were introduced via the post-synthesis sulfonation. The presented sulfonated magnetic nanocomposite adsorbents can be easily separated using permanent magnets and their adsorption performance was comparable to the commercially available ion-exchange resins. The determined maximum adsorption capacities were between 10.9 and 49.5 mg?g^?1, whilst the equilibrium was reached for the contact time lower than 60 minutes.     

Synergetic association of grafted PLA and functionalized graphene on the properties of the designed nanocomposites

The synergetic association of poly(lactic acid) grafted with maleic anhydride (MA-g-PLA) containing 0.44 wt% of maleic anhydride and epoxy-functionalized graphene (GFe) on the properties of the designed nanocomposites was studied. Rheological, mechanical and barrier properties of PLA nanocomposites were studied using different content of epoxy-functionalized graphene and MA-g-PLA compatibilizer. The PLA/MA-g-PLA/GFe nanocomposites prepared by melt blending, containing 5 wt% of MA-g-PLA, yield a maximum in storage modulus G′ and a rheological plateau at low frequencies, with a content of epoxy-functionalized graphene comprised between 4 and 7 wt%. This phenomenon was ascribed to a pseudo-solid behavior resulting from the high degree of epoxy-functionalized graphene exfoliation due to strong interfacial interactions with PLA and epoxy-functionalized graphene. The better mechanical and barrier performances were obtained with PLA/GFe containing 10 wt% of epoxy-functionalized graphene and 5 wt% of MA-g-PLA compatibilizer. The variation of the percentage of compatibilizer showed that 5 wt% of maleated PLA was sufficient to improve the thermal, rheological, mechanical and barrier properties of the PLA nanocomposite containing 7 wt% of epoxy-functionalized graphene.     

Ethylene propylene diene terpolymer/ethylene vinyl acetate/layered silicate ternary nanocomposite by solution method

A new ternary nanocomposite has been developed using ethylene propylene diene terpolymer (EPDM), ethylene vinyl acetate (EVA‐45) copolymer, and organically modified layered silicate (16 Me‐MMT) from sodium montmorillonite (Na⁺‐MMT). Wide angle X‐ray diffraction and transmission electron microscopic analysis confirmed the intercalation of the polymer chains in between the organosilicate layers and the nanoscale distribution of 16 Me‐MMT in polymer matrix, respectively. The measurement of mechanical properties for 2–8 wt% of 16 Me‐MMT loadings showed a significant increase in tensile strength, elongation at break, and modulus at different elongations. Such an improvement in mechanical properties has been correlated based on the fracture behavior of nanocomposite by SEM analysis. Thermal stability of EPDM/EVA/layered silicate ternary nanocomposites also showed substantial improvements compared with the neat EPDM/EVA blend, confirming thereby the formation of a high performance nanocomposite. POLYM. ENG. SCI., 46:437–843, 2006. © 2006 Society of Plastics Engineers     

Polylactide/transition metal ion modified montmorillonite nanocomposite—a critical evaluation of mechanical performance and thermal stability

Polylactide (PLA) nanocomposite was prepared by melt blending of PLA and transition metal ion (TMI) adsorbed montmorillonite (MMT). PLA nanocomposite was characterized for mechanical performance, and the results revealed that the tensile modulus, flexural modulus, and impact strength were increased marginally. The nanocomposite was optimized at 5 wt% of TMI‐modified MMT (TMI‐MMT) loading. Thermogravimetric analysis displayed increase in onset of degradation temperature, and differential scanning calorimetry showed marginal increase in glass transition temperature (T_g) and melting temperature (T_m) in case of PLA nanocomposites, when compared with virgin PLA. The flammability testing of nanocomposites indicated good fire retardance characters. X‐ray diffraction patterns of TMI‐MMT and the corresponding nanocomposites indicated an intercalation of the metal ions into the clay interlayer. Fourier transform infrared spectroscopy analysis indicate formation of [Zn(EDA)₂]²⁺ and [Cu(EDA)₂]²⁺ complexes in the MMT interlayer. Dynamic mechanical analysis shows increase in glass transition temperature (T_g) and storage modulus (E′) in case of PLA nanocomposites reinforced with 5 wt% modified MMT. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Chemical modification of PVC by different nucleophiles in solvent/non-solvent system at high temperature

Chemical modification of polyvinyl chloride by nucleophiles is a versatile method for preparation of new functional polymers. Modification of PVC was carried out using different nucleophiles (Nu) in ethylene glycol (EG)/N,N-dimethylformamide (DMF) (1:1 by volume) solution. OH^?, N₃^?, and SCN^? were examined as nucleophiles in this study. The FTIR spectrum confirmed substitution of Cl by nucleophiles and also the elimination of HCl in the modification reaction of PVC. The glass transition temperatures (T_gs) of modified-PVC samples were in the order N₃^? > SCN^? > OH^? and were equal to 87.6, 86.8 and 78.15 °C, respectively. The T_5% (the temperature at which weight loss is 5%) of PVC was 266 °C, while after 1 h modification by OH^? it reduced to 197 °C. After alkaline modification, the scanning electron microscopy (SEM) images not only showed an increase in surface roughness and porosity, but also revealed a relatively large drop in average particle size from 160 to 80 µm. Molecular weight and molecular weight distribution were determined by gel permeation chromatography (GPC). The GPC results showed that the number average molecular weight (M_n) and weight average molecular weight (M_w) were decreased from 79,950 and 176,360 g mol^?1 in crude PVC to 45,370 and 99,930 g mol^?1, respectively, after 1 h modification by OH^?. Alkaline treatment also decreased the mechanical strength of PVC.     

Synthesis of polyamine-grafted chitosan and its adsorption behavior

The development of new environment-friendly and efficient adsorbents has attracted a great interest in recent years. In this study, ethylene diamine-grafted chitosan copolymer (CS–MAA–EN) and triethylene tetramine-grafted chitosan copolymer (CS–MAA–TN) were synthesized to remove heavy metal ions from water. The influence of pH, adsorbents dosage and initial metal concentration were investigated to study the adsorbing effect of CS–MAA–EN and CS–MAA–TN for the removal of Cu²⁺ from aqueous solutions. The equilibrium adsorption capacities of CS–MAA–EN and CS–MAA–TN were 85.91 and 102.67 mg/g, respectively. The adsorption process was fitted better by the Langmuir isotherm model (R ² = 0.9993, 0.9991) than the Freundlich isotherm model (R ² = 0.8781, 0.8775). The adsorption kinetics confirmed that the adsorption mechanism could be better described by the pseudo-second-order equation. Two adsorbents showed excellent desorption efficiency (D _e) and reuse ratio (R _u). D _e and R _u of CS–MAA–EN were evaluated as 95.2 and 89.35 %, respectively, and those values of CS–MAA–TN were 92.73 and 83.25 %. The competitive adsorption results of the two adsorbents indicated that the rate sequence was Fe³⁺ > Cu²⁺ > Cr⁶⁺ > Ni²⁺ > Zn²⁺.     

Synthesis and characterization of UV-curing epoxy acrylate coatings modified with organically modified rectorite

Epoxy acrylate (EA) coatings modified with organically modified rectorite (OREC) were synthesized employing the ultraviolet-curing technique. Two kinds of alkyl ammonium ions, octadecyltrimethylammonium chloride (OTAC) and [2-(methacryloyloxy)ethyl]trimethylammonium chloride (MAOTMA), were used to modify rectorite (REC). The methacrylate functionalities of MAOTMA were capable of reacting with the acrylate groups of EA. The structure of OREC was characterized by FTIR and XRD and the results indicated that the surfactants were successfully intercalated into the REC interlayers via cation exchange process. The morphology of nanocomposites was investigated by SEM and TEM. OREC showed better dispersion in EA matrix compared with unmodified REC. The T _g of neat EA obtained by DMA was 75.6°C, while for 5 wt% EA/MAOTMA-REC and EA/OTAC-REC nanocomposites it increased to 76.5 and 80.8°C, respectively. The nanocomposite with 3 wt% loading of OTAC-REC had the highest T _g (89.7°C). TGA revealed that the thermal stability of nanocomposites was enhanced by OTAC-REC and MAOTMA-REC and the thermal stability of EA/MAOTMA-REC nanocomposites was better than that of EA/OTAC-REC nanocomposites. The mechanical properties of nanocomposites containing OTAC-REC and MAOTMA-REC were better than those of nanocomposites containing unmodified REC. With increasing OREC content, the adhesive force of nanocomposites decreased slightly and the flexibility increased significantly.     

Preparation of a long-alkyl-chain silane grafted organic montmorillonite and its nanocomposite with SEBS

In this study, a modified montmorillonite (W-H-OMMT) was prepared by intercalating pristine montmorillonite using a phosphorus salt and a subsequent grafting using a long-alkyl-chain silane, and the nanocomposites with poly[styrene–(ethylene-co-butylene)–styrene] (SEBS) were prepared by melt blending. The pristine and the modified MMT were characterized by XRD, FT-IR, XPS and SEM. The morphology of the SEBS nanocomposites was studied using XRD, SEM and TEM, and the results can be correlated well with transparency, color, surface contact angle, rheological behavior, thermal and mechanical properties of the nanocomposites. As compared with pristine and the modified clay, more uniform dispersion and improved compatibility are observed for the W-H-OMMT in the SEBS matrix, resulting in better transparency and more hydrophobic surface for the SEBS/W-H-OMMT nanocomposite. Better thermal stability, a synergetic effect in tensile strength and elongation at break were observed, which can be attributed to well dispersion of the W-H-OMMT, as well as perfect adhesion between the W-H-OMMT and the SEBS matrix from the enhanced molecular interaction between the long-alkyl chain and the SEBS molecules. Compared to pure SEBS, the strength and elongation of SEBS/W-H-OMMT nanocomposite increased by 8.5 and 7.6 %; meanwhile, the water contact angel and the 50 % weight loss temperature increased by 5.3 and 13.1 %, respectively. Appropriate silane grafted organic montmorillonite provided an efficient way for the overall performance improvement of SEBS.     

Optimization of controlled ring-opening polymerization of <Emphasis Type="SmallCaps">l</Emphasis>-lactide to hydroxyl terminated polylactides using zinc acetate catalyst

Hydroxyl terminated polylactide polymers with number of average molecular weights (M _n ) varying from 1625 to 3459 g mol^?1 were synthesized by ring opening bulk polymerization of lactide in the presence of zinc acetate being a potent catalyst. The use of 1,4 butanediol (BDO) initiator leads to hydroxyl terminated polylactides, thus excellent precursors for shape-memory biodegradable polyurethanes. Different reaction conditions employed for the synthesis of hydroxyl terminated polylactide polymers via activated monomer mechanism may result in differences in M _n , percentage mass conversion and percentage degree of crystallinity (%χ _c ) of the product. Influence of process parameters, i.e. catalyst concentration, initiator concentration, reaction temperature and time on characteristics of hydroxyl terminated polylactides was studied. These polymers were characterized by Nuclear Magnetic Resonance (¹H-NMR) spectroscopy, Fourier transforms infrared (FTIR) spectroscopy, gel permeation chromatography (GPC) and X-ray diffraction (XRD) techniques. FTIR and ¹H-NMR confirmed the formation of hydroxyl terminated polylactides. M _n was determined by ¹H-NMR, GPC and end group analysis. %χ _c was calculated from XRD spectra. Maximum mass conversion, M _n and %χ _c were observed at 5 mol% SnOct₂ and 5 mol% BDO concentration. At optimum temperature of 145 °C, these characteristics improved linearly with polymerization time up to 6 h and declined thereafter.     

Synthesis of Na+‐montmorillonite/amphiphilic polyurethane nanocomposite via bulk and coalescence emulsion polymerization

Polyurethane/clay nanocomposites have been synthesized using Na⁺‐montmorillonite (Na⁺‐MMT)/amphiphilic urethane precursor (APU) chains that have hydrophilic polyethylene oxide (PEO) chains and hydrophobic segments at the same molecules. Nanocomposites were synthesized through two different crosslinking polymerization methods. One is UV curing of melt mixed APU/Na⁺‐MMT mixtures; the other is coalescence polymerization of APU/Na⁺‐MMT emulsions. These two kinds of composites had intercalated silicate layers of Na⁺‐montmorillonite by insertion of PEO chains in APU chains, which was confirmed by X‐ray diffraction measurement and transmission electron microscopy. These composite films also showed improved mechanical properties compared to pristine APU films. Although the two kinds of nanocomposites exhibited the same degree of intercalation and were synthesized based on the same precursor chains, these nanocomposite films had the different mechanical properties. Nanocomposites synthesized using APU/Na⁺‐MMT emulsions, having microphase‐separated structure, had greater tensile strength than those prepared with melt‐mixed APU/Na⁺‐MMT mixtures. Location of intercalated Na⁺‐MMT by PEO chains at the oil–water interface also could be confirmed by rheological behavior of the APU/Na⁺‐MMT/water mixture. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3130–3136, 2003     

Combined extracts of <Emphasis Type="Italic">Garcinia mangostana</Emphasis> fruit rind and <Emphasis Type="Italic">Cinnamomum tamala</Emphasis> leaf supplementation enhances muscle strength and endurance in resistance trained males

Background

A proprietary composition GMCT contains extracts of two popular Asian herbs viz., Garcinia mangostana (GM) fruit rind and Cinnamomum tamala (CT) leaf. We systematically evaluated physical performance and muscle strength enhancing ability of GMCT in a preclinical mouse model followed by a 42-days double-blind placebo controlled human trial in resistance trained adult males.

Methods

Four groups of Swiss albino mice (20–30 g body weight) (n?=?6) were fed a standard laboratory diet and given Carboxymethylcellulose sodium (CMC), 150 mg/kg GMCT (GMCT-150), 300 mg/kg GMCT (GMCT-300) or 50 mg/kg Oxymetholone (OXY) via oral gavage for 21 days. On day 22, the animals’ physical performance and muscle strength were assessed in a forced swimming test (FST) and forelimb grip strength experiment, respectively.In the human trial, thirty-eight resistance-trained young adults (mean age 26.32?±?4.39 years, body weight 67.79?±?12.84 kg, BMI 22.92?±?3.54 kg/m²) completed the trial. The participants received either GMCT (n?=?19; 800 mg daily) or matched placebo (n?=?19) for 42 days. As primary variables, 1-RM bench press, 1-RM leg press, and leg extension repetitions were measured at baseline and on days 14, 28 and 42 of the intervention. Anthropometric parameters and serum markers such as free testosterone, insulin-like growth factor 1 (IGF-1), insulin and lactate were also measured before and after the intervention.

Results

GMCT-300 mice showed significant improvement in swimming time (GMCT: 395.3?±?81.70 s vs. CMC: 271.6?±?56.86 s; p?=?0.0166), distance (GMCT: 341.22?±?65.88 m vs. CMC: 260.84?±?49.15 m; p?=?0.0461) and grip strength (GMCT: 43.92?±?6.97 N vs. CMC: 35.0?±?6.92 N; p?=?0.0490), compared with the CMC group.At the end of the 42-day human trial, the per protocol analyses reveal that mean changes from baseline 1-RM bench press (GMCT: 23.47?±?10.07 kg vs. PL: 3.42?±?2.06 kg; p?<?0.0001), leg press (GMCT: 29.32?±?16.17 kg vs. PL: 5.21?±?1.72 kg; p?<?0.0001), number of leg extension repetitions (GMCT: 6.58?±?2.57 vs. PL: 2.05?±?1.22; p?<?0.0001) in GMCT group were significantly improved, compared with placebo. Intergroup difference analyses show that the changes from baseline left arm (GMCT: 1.09?±?0.36 cm vs. PL: 0.68?±?0.42 cm; p?=?0.0023), right arm (GMCT: 1.50?±?0.44 cm vs. PL: 1.11?±?0.43 cm; p?=?0.0088) circumference and lean mass (GMCT: 2.29?±?2.09 kg vs. PL: 0.52?±?2.58 kg; p?=?0.0404) in GMCT group were also significantly improved, compared with placebo. In comparison to placebo, GMCT supplementation did not improve free testosterone, IGF-1, insulin or lactate levels. Parameters of clinical biochemistry, hematology, urine and vital signs of the participants were within the normal range.

Conclusion

GMCT supplementation is effective in increasing muscle strength, muscle size and, total lean mass, as well as endurance performance.Trial Registration.Clinical Trial Registry of India (CTRI/2015/01/005374), Registered on Jan 07, 2015; CTRI Website URL - http://ctri.nic.in

     

Preparation of high surface area mesoporous nickel oxides and catalytic oxidation of toluene and formaldehyde

Mesoporous nickel oxide (NiO) nanoparticles were synthesized by the thermal decomposition reaction of Ni(NO₃)₂·9H₂O using oxalic acid dihydrate as the mesoporous template reagent. The pore structure of nanocrystals could be controlled by the precursor to oxalic acid dihydrate molar ratio, thermal decomposition temperature and thermal decomposition time. The structural characteristic and textural properties of resultant nickel oxide nanocrytals were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), N₂ adsorption–desorption isotherm and temperature programmed reduction. The results showed that the most excellently mesoporous nickel oxide particles (m-Ni-1-4) with developed wormlike pores were prepared under the conditions of the mixed equimolar precursor and oxalic acid and calcined for 4 h at 400 °C. The specific surface area and pore volume of m-Ni-1-4 are 236 m² g^?1 and 0.42 cm³ g^?1, respectively. Over m-Ni-1-4 at space velocity = 20,000 mL g^?1 h^?1, the conversions of toluene and formaldehyde achieved 90 % at 242 and 160 °C, respectively. It is concluded that the reactant thermal decomposition with oxalic acid assist is a key step to improve the mesoporous quality of the nickel oxide materials, the developed mesoporous architecture, high surface area, low temperature reducibility and coexistence of multiple oxidation state nickel species for the excellent catalytic performance of m-Ni-1-4.     

Solid-state polyetherimide (PEI) nanofoams: the influence of the compatibility of nucleation agent on the cellular morphology

The introduction of polyhedral oligomeric silsesquioxane (POSS) particles which act as heterogeneous nucleation agent was applied to improve the cellular morphology of nanocellular polyetherimide (PEI) foams. The loading of POSS particles increases the solubility and diffusivity characteristics of gases in nanocomposite sheets by changing the distribution of the free volume and enlarging the unoccupied volume in polymer matrix. When the range of content of POSS particles is 0.2?~?1.0 wt. %, the range of the calculated surface tension of PEI/scCO₂ (γ _mix ) and radius of the critical nucleus (r*) are 30.98?~?28.14 mN/m, and 6.88?~?6.25 nm, respectively. However, the small aggregated POSS particles are favour of heterogeneous nucleation bacause the actual diameter of the aggregated POSS particles is approximate to twice r*, so the addtion of 0.5 wt. % POSS to PEI matrix presents excellent heterogeneous nucleation performance for foaming. The average cell size of 0.5 wt. % POSS/PEI nanofoams compared with neat PEI decreases from 108 to 66 nm and the cell density increses from 5.96?×?10¹⁴ to 3.34?×?10¹⁵ cells/cm³.