Enhancement of heavy metal ion adsorption using electrospun polyacrylonitrile nanofibers loaded with ZnO nanoparticles

This article describes the adsorption and tensile behavior of electrospun polyacrylonitrile (PAN) nanofiber mats loaded with different amounts of ZnO [0.5, 1.0, 2.0, and 5.0 wt%] nanoparticles. X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transforminfrared (FTIR) spectroscopy, and thermal gravimetric analysis (TGA) were utilized to characterize the resulting composite nanofibers. Microscopic investigations revealed that the increase in surface roughness and diameter of the electrospun PAN nanofibers was due to the addition of ZnO nanoparticles. Adsorption results indicated that the fabricated PAN/ZnO (2.0 wt%) composite nanofiber mats showed the best adsorption performance with 261% and 167% increase in adsorption capacities for Pb(II) and Cd(II) from aqueous solutions, respectively, compared to pristine PAN nanofibers. The adsorption equilibrium was reached within 60 min, and the process could be described using the nonlinear pseudo-second-order kinetic model. The adsorption isotherm study was better represented by the Langmuir model, which suggested a homogeneous distribution of the monolayer adsorptive sites on the surface of the composite nanofibers. Mechanical testing revealed that the decrease in tensile strength and elongation at breakof the PAN/ZnO composite nanofiber mats was due to the formation of some bead defects and agglomerates within the structure of the PAN nanofibers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47209.     

Morphology enhancement of TiO2/PVP composite nanofibers based on solution viscosity and processing parameters of electrospinning method

In this work, different sol solutions with various titanium tetraisopropoxide (TIP)/glacial acetic acid ratios in 2‐propanol with 5 wt % poly(vinyl pyrrolidone) (PVP) (M_w = 360,000 g/mol) were prepared and electrospun. Composition of the prepared sols and as‐spun TiO₂/PVP nanofibers were determined by Fourier transform infrared and Raman spectroscopy methods. Morphology of the electrospun TiO₂/PVP nanofibers was studied by scanning electron microscopy and transmission electron microscopy (TEM) techniques. Rheometry measurements of the sol solutions showed decrease of viscosity upon the addition of TIP to the polymer solutions with constant polymer and acid concentrations. The sol solution having the lowest viscosity (at shear rate 10 s^?1) but the highest TIP/glacial acetic acid ratio showed beaded nanofibers morphology when electrospun under 10 and 12 kV applied voltage while injection rate, needle tip to collector distance, and needle gauge were kept constant. However, smooth electrospun TiO₂/PVP composite nanofibers with the average nanofibers diameters (148 ± 79 nm) were achieved under the same condition when applied voltage increased to 15 kV. TEM micrographs of the electrospun TiO₂/PVP nanofiber showed that the TiO₂ particles with continuous structure are formed at the middle of the nanofiber and distributed along its axis. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46337.     

Increases in solar conversion efficiencies of the ZrO<Subscript>2</Subscript> nanofiber-doped TiO<Subscript>2</Subscript> photoelectrode for dye-sensitized solar cells

In this paper, in order to improve the efficiency of dye-sensitized solar cells, we introduced zirconia [ZrO₂] nanofibers into a mesoporous titania [TiO₂] photoelectrode. The photoelectrode consists of a few weight percent of ZrO₂ nanofibers and a mesoporous TiO₂ powder. The mixed ZrO₂ nanofibers and the mesoporous TiO₂ powder possessed a larger surface area than the corresponding mesoporous TiO₂ powder. The optimum ratio of the ZrO₂ nanofiber was 5 wt.%. The 5 wt.% ZrO₂-mixed device could get a short-circuit photocurrent density of 15.9 mA/cm², an open-circuit photovoltage of 0.69 V, a fill factor of 0.60, and a light-to-electricity conversion efficiency of 6.5% under irradiation of AM 1.5 (100 mW/cm²).     

Preparation and characterization of electrospun Ag/polyacrylonitrile composite nanofibers

Novel composite nanofibers consisting of Ag nanoparticles and polyacrylonitrile (PAN) were fabricated successfully. The Raman properties of these Ag/PAN nanofibers were studied at low temperatures, which showed good Raman characteristics. In the process, a PAN solution containing Ag ions was directly electrospun to obtain nanofiber films containing Ag ions, and the Ag ions of resulting composite nanofibers were reduced to Ag nanoparticles in N₂H₅OH aqueous solution. Then, we treated Ag/PAN composite nanofibers at 100 °C, 200 °C, 400 and 600 °C, respectively. The Ag/PAN nanocomposite film was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) patterns and surface-enhanced Raman scattering (SERS) spectroscopy.     

Mass‐Production of Electrospun Carbon Nanofiber Containing SiOx for Lithium‐Ion Batteries with Enhanced Capacity

In this study, electrospun carbon nanofibers hybridized with silicon oxide (SiO_x) are prepared by using a syringeless electrospinning system of polyacrylonitrile (PAN) solution containing tetraethylorthosilicate (TEOS) via a sequential pyrolysis process. The syringeless electrospinning system provides a large number of composite nanofibers in a short time, and the obtained composite nanofibers exhibit uniform diameter and morphology. The composite nanofiber is converted into a carbon nanofiber containing SiO_x via a simple pyrolysis. The obtained SiO_x‐carbon nanofiber mat exhibits higher charge/discharge capacity than a general carbon nanofiber, and it provides more stable retention than single crystalline silicon materials. Thus, the mass‐production of a SiO_x‐carbon nanofiber from syringeless electrospinning is a promising method to produce anodic materials for Li‐ion batteries.     

The optical properties of PVA/TiO2 composite nanofibers

The electrospun nanofibers emerge several advantages because of extremely high specific surface area and small pore size. This work studies the effect of PVA nanofibers diameter and nano‐sized TiO₂ on optical properties as reflectivity of light and color of a nanostructure assembly consisting polyvinyl alcohol and titanium dioxide (PVA/TiO₂) composite nanofibers prepared by electrospinning technique. The PVA/TiO₂ composite spinning solution was prepared through incorporation of TiO₂ nanoparticles as inorganic optical filler in polyvinyl alcohol (PVA) solution as an organic substrate using the ultrasonication method. The morphological and optical properties of collected composites nanofibers were highlighted using scanning electron microscopy (SEM) and reflective spectrophotometer (RS). The reflectance spectra indicated the less reflectance and lightness of composite with higher nanofiber diameter. Also, the reflectance and lightness of nanofibers decreased with increasing nano‐TiO₂ concentration. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The influence of anatase-rutile mixed phase and ZnO blocking layer on dye-sensitized solar cells based on TiO2nanofiberphotoanodes

High performance is expected in dye-sensitized solar cells (DSSCs) that utilize one-dimensional (1-D) TiO₂ nanostructures owing to the effective electron transport. However, due to the low dye adsorption, mainly because of their smooth surfaces, 1-D TiO₂ DSSCs show relatively lower efficiencies than nanoparticle-based ones. Herein, we demonstrate a very simple approach using thick TiO₂ electrospun nanofiber films as photoanodes to obtain high conversion efficiency. To improve the performance of the DSCCs, anatase-rutile mixed-phase TiO₂ nanofibers are achieved by increasing sintering temperature above 500°C, and very thin ZnO films are deposited by atomic layer deposition (ALD) method as blocking layers. With approximately 40-μm-thick mixed-phase (approximately 15.6?wt.% rutile) TiO₂ nanofiber as photoanode and 15-nm-thick compact ZnO film as a blocking layer in DSSC, the photoelectric conversion efficiency and short-circuit current are measured as 8.01% and 17.3?mA?cm^?2, respectively. Intensity-modulated photocurrent spectroscopy and intensity-modulated photovoltage spectroscopy measurements reveal that extremely large electron diffusion length is the key point to support the usage of thick TiO₂ nanofibers as photoanodes with very thin ZnO blocking layers to obtain high photocurrents and high conversion efficiencies.     

Thiol-modified cellulose nanofibrous composite membranes for chromium (VI) and lead (II) adsorption

Oxidized cellulose nanofibers (CNF), embedded in an electrospun polyacrylonitrile (PAN) nanofibrous scaffold, were grafted with cysteine to increase the adsorption capability for chromium (VI) and lead (II). Thiol-modified cellulose nanofibers (m-CNF) were characterized by titration, FT-IR, energy dispersive spectroscopy (EDS) and SEM techniques. Static and dynamic Cr(VI) and Pb(II) adsorption studies of m-CNF nanofibrous composite membranes were carried out as a function of pH and of contact time. The results indicated these membranes exhibited high adsorption capacities for both Cr(VI) (87.5 mg/g) and Pb(II) (137.7 mg/g) due to the large surface area and high concentration of thiol groups (0.9 mmol of –SH/gram m-CNF). The morphology and property of m-CNF nanofibrous composite membranes was found to be stable, and they could be used and regenerated multiple times with high recovery efficiency.     

Metallophthalocyanine/polyacrylonitrile nanofibers by solution blow spinning technique for enhanced photocatalytic activity by visible light

A novel photocatalyst, nano-sized zinc and cobalt phthalocyanines (MPc), are anchored on polyacrylonitrile (PAN) nanofibers in the presence or absence of TiO₂ and the process was realized with an innovative solution blow spinning (SBS) method for the first time. Novel nanofiber composites were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy techniques. According to the SEM micrographs, the immobilization of nano-Pcs on the surface of PAN nanofibers was uniform and does not involve agglomeration. The MPc/PAN composite yielded nearly complete degradation of methylene blue (MB) of a highly photocatalytic nature. It was also found that the presence of TiO₂ on MPc/PAN composite have no effect on photodegradation of MB. Also, the recycling of new photocatalysts required as little change as possible owing to their macroscopic structure and their flexible nature.     

Photocatalytic Deposition of Silver Nanoparticles onto Organic/Inorganic Composite Nanofibers

Summary: In this work, silver nanoparticles were embedded in electrospun organic/inorganic composite nanofibers consisting of PAN and TiO₂ through photocatalytic reduction of the silver ions in silver nitrate solutions under UV irradiation. The morphology and diameter of PAN/TiO₂ composite nanofibers could be controlled by varying the initial contents of TiO₂ in the spinning solution. From TEM images and UV‐Vis spectra, it has been confirmed that monodisperse silver nanoparticles with a diameter of ≈2 nm were deposited selectively upon the titania of the as prepared composite nanofibers. The amount of Ag nanoparticles embedded on composite nanofibers was greatly influenced by the amount of TiO₂ in composite nanofibers, reflecting the role of titania as the inorganic stabilizer and photocatalyst.

Morphology of silver nanoparticles embedded on PAN/TiO₂ composite nanofibers.     

Magnetic‐field‐assisted electrospinning highly aligned composite nanofibers containing well‐aligned multiwalled carbon nanotubes

Composite nanofiber meshes of well‐aligned polyacrylonitrile (PAN)/polyvinylpyrrolidone (PVP) nanofibers containing multiwalled carbon nanotubes (MWCNTs) were successfully fabricated by a magnetic‐field‐assisted electrospinning (MFAES) technology, which was confirmed to be a favorable method for preparation of aligned composite nanofibers in this article. The MFAES experiments showed that the diameters of composite nanofibers decreased first and then increased with the increase of voltage and MWCNTs content. With the increase of voltage, the degree of alignment of the composite nanofibers decreased, whereas it increased with increasing MWCNTs concentration. Transmission electron microscopy observation showed that MWCNTs were parallel and oriented along the axes of the nanofibers under the low concentration. A maximum enhancement of 178% in tensile strength was manifested by adding 2 wt % MWCNTs in well‐aligned composite nanofibers. In addition, the storage modulus of PAN/PVP/MWCNTs composite nanofibers was significantly higher than that of the PAN/PVP nanofibers. Besides, due to the highly ordered alignment structure, the composite nanofiber meshes showed large anisotropic surface resistance, that is, the surface resistance of the composite nanofiber films along the fiber axis was about 10 times smaller than that perpendicular to the axis direction. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41995.     

Electrospun polyacrylonitrile/zinc chloride composite nanofibers and their response to hydrogen sulfide

In this work, we explore the electrospinning of polyacrylonitrile (PAN)/zinc(II) chloride (ZnCl₂) composite nanofibers and the response of these nanofibers to hydrogen sulfide (H₂S). Solution properties, including surface tension, viscosity, and conductivity, have been measured and integrated with the results of a variety of other analytical techniques to investigate the effects of ZnCl₂ salt on the structure and thermal properties of electrospun nanofibers. It is found that the addition of ZnCl₂ reduces the diameter and inhibits the instantaneous cyclization reaction of these nanofibers. Additionally, exposing PAN/ZnCl₂ fibers to H₂S leads to the formation of PAN/zinc sulfide (ZnS) composite nanofibers that contain ZnS crystals on the surface. These results indicate that PAN/ZnCl₂ composite nanofibers could find applications in H₂S sensing and removal, or as precursors for semiconductor ZnS-coated polymer nanofibers.     

Effects of poly (vinyl alcohol) (PVA) content on preparation of novel thiol-functionalized mesoporous PVA/SiO2 composite nanofiber membranes and their application for adsorption of heavy metal ions from aqueous solution

Thiol-functionalized mesoporous poly (vinyl alcohol)/SiO₂ composite nanofiber membranes and pure PVA nanofiber membranes were synthesized by electrospinning. The results of Fourier transform infrared (FTIR) indicated that the PVA/SiO₂ composite nanofibers were functionalized by mercapto groups via the hydrolysis polycondensation. The surface areas of the PVA/SiO₂ composite nanofiber membranes were >290 m²/g. The surface areas, pore diameters and pore volumes of PVA/SiO₂ composite nanofibers decreased as the PVA content increased. The adsorption capacities of the thiol-functionalized mesoporous PVA/SiO₂ composite nanofiber membranes were greater than the pure PVA nanofiber membranes. The largest adsorption capacity was 489.12 mg/g at 303 K. The mesoporous PVA/SiO₂ composite nanofiber membranes exhibited higher Cu²⁺ ion adsorption capacity than other reported nanofiber membranes. Furthermore, the adsorption capacity of the PVA/SiO₂ composite nanofiber membranes was maintained through six recycling processes. Consequently, these membranes can be promising materials for removing, and recovering, heavy metal ions in water.     

Preparation of hydrazine‐modified polyacrylonitrile nanofibers for the extraction of metal ions from aqueous media

Polyacrylonitrile (PAN) nanofibers (prepared by an electrospinning technique) were chemically modified with hydrazine. The Fourier transform infrared spectrum of the hydrazine‐modified polyacrylonitrile (HM–PAN) showed that the intensity of the nitrile peak (2250 cm⁻¹) of the PAN nanofibers decreased significantly after treatment with hydrazine. New peaks at about 3400–3100 cm⁻¹ (N H stretching vibration) also appeared, which showed that the hydrazine was chemically attached to the PAN nanofibers. HM–PAN had a smooth surface (as confirmed by a scanning electron microscopy) and was a suitable material for the adsorption of metal ions from aqueous solutions. The adsorption capacity of HM–PAN increased as the adsorption time increased and became constant at 114 and 217 mg/g for Cu(II) and Pb(II) ions, respectively, after 24 h. In addition, more than 90% of the adsorbed Cu(II) and Pb(II) ions were recovered in a 1M HNO₃ solution after 1 h. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Studies on the synthesis of electrospun PAN‐Ag composite nanofibers for antibacterial application

We have successfully synthesized polyacrylonitrile (PAN) nanofibers impregnated with Ag nanoparticles by electrospinning method at room temperature. Briefly, the PAN‐Ag composite nanofibers were prepared by electrospinning PAN (10% w/v) in dimethyl formamide (DMF) solvent containing silver nitrate (AgNO₃) in the amounts of 8% by weight of PAN. The silver ions were reduced into silver particles in three different methods i.e., by refluxing the solution before electrospinning, treating with sodium borohydride (NaBH₄), as reducing agent, and heating the prepared composite nanofibers at 160°C. The prepared PAN nanofibers functionalized with Ag nanoparticles were characterized by field emission scanning electron microscopy (FESEM), SEM elemental detection X‐ray analysis (SEM‐EDAX), transmission electron microscopy (TEM), and ultraviolet‐visible spectroscopy (UV‐VIS) analytical techniques. UV‐VIS spectra analysis showed distinct absorption band at 410 nm, suggesting the formation of Ag nanoparticles. TEM micrographs confirmed homogeneous dispersion of Ag nanoparticles on the surface of PAN nanofibers, and particle diameter was found to be 5–15 nm. It was found that all the three electrospun PAN‐Ag composite nanofibers showed strong antibacterial activity toward both gram positive and gram negative bacteria. However, the antibacterial activity of PAN‐Ag composite nanofibers membrane prepared by refluxed method was most prominent against S. aureus bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Electrospun CdS–TiO2 doped carbon nanofibers for visible-light-induced photocatalytic hydrolysis of ammonia borane

CdS/TiO₂ NPs-decorated carbon nanofibers were introduced as a novel photocatalyst working under visible light radiation for the effective hydrolytic dehydrogenation of ammonia borane. Calcination of electrospun nanofiber mats composed of titanium tetraisopropoxide, poly (vinyl pyrrolidone) (PVP), and cadmium acetate dihydrate with a few drops of ammonium sulfide in argon atmosphere at 850 °C led to the production of CdS–TiO₂ decorated carbon nanofibers. As-synthesized nanocomposite exhibited a strong photocatalytic activity for catalytic hydrolysis of ammonia–borane. The favorable electrons-transfer properties, better dispersion, high surface area, and adsorption property are the main features of nanocomposites that exhibit high catalytic efficiency.     

Improved graphitization and electrical conductivity of suspended carbon nanofibers derived from carbon nanotube/polyacrylonitrile composites by directed electrospinning

Single suspended carbon nanofibers on carbon micro-structures were fabricated by directed electrospinning and subsequent pyrolysis at 900 °C of carbon nanotube/polyacrylonitrile (CNT/PAN) composite material. The electrical conductivity of the nanofibers was measured at different weight fractions of CNTs. It was found that the conductivity increased almost two orders of magnitude upon adding 0.5 wt.% CNTs. The correlation between the extent of graphitization and electrical properties of the composite nanofiber was examined by various structural characterization techniques, and the presence of graphitic regions in pyrolyzed CNT/PAN nanofibers was observed that were not present in pure PAN-derived carbon. The influence of fabrication technique on the ordering of carbon sheets in electrospun nanofibers was examined and a templating effect by CNTs that leads to enhanced graphitization is suggested.     

Preparation of poly(vinyl alcohol)/poly(acrylic acid)/TiO2/carbon nanotube composite nanofibers and their photobleaching properties

The composite nanofibers of poly(vinyl alcohol) (PVA)/poly(acrylic acid) (PAAc)/titanium(IV) oxide (TiO₂) were prepared by electrospinning for a novel photocatalytic treatment of waste water. To improve the photoelectronic properties of PVA/PAAc/TiO₂ composite nanofibers, carbon nanotubes (CNTs) were used as an additive. The TiO₂ and CNTs were immobilized in the PVA/PAAc hydrogels as electrospun nanofibers for an easier recovery after the wastewater treatment. The improved efficiency of pollutant dye removal was observed at pH 10 due to the pH-sensitive swelling behavior of the PVA/PAAc/TiO₂/CNTs composite nanofibers. The photocatalytic activity of TiO₂ was improved noticeably by applying electric field to the CNTs-embedded composite nanofibers.     

Single‐wall carbon nanotubes dispersion behavior and its effects on the morphological and mechanical properties of the electrospun nanofibers

The dispersion behavior of single‐walled carbon nanotube (SWCNT) has important effects on morphological and mechanical properties of SWCNT composite nanofibers. The relationship of the dispersion conditions with morphological and mechanical characteristics for SWCNT / polyacrylonitrile (PAN) / polyvinylpyrrolidone (PVP) composite nanofibers have been examined. The SEM and TEM analyses of the nanofibers revealed that the deformation in the nanofiber structures increases with increasing concentration of SWCNTs. Tensile results showed that only 2 wt% SWCNT loading to the electrospun composite nanofibers gave rise to 10‐fold and 3‐fold increase in the tensile modulus and tenacity of nanofiber layers, respectively. Essentially, high mechanical properties and uniform morphology of the composite nanofibers were found at SWCNT concentration of ∼2 wt% due to their stable and individual dispersion. POLYM. COMPOS., 33:1951–1959, 2012. © 2012 Society of Plastics Engineers     

Enhancement of the photoelectric performance of dye-sensitized solar cells using Ag-doped TiO<Subscript>2</Subscript> nanofibers in a TiO<Subscript>2</Subscript> film as electrode

For high solar conversion efficiency of dye-sensitized solar cells [DSSCs], TiO₂ nanofiber [TN] and Ag-doped TiO₂ nanofiber [ATN] have been extended to be included in TiO₂ films to increase the amount of dye loading for a higher short-circuit current. The ATN was used on affected DSSCs to increase the open circuit voltage. This process had enhanced the exit in dye molecules which were rapidly split into electrons, and the DSSCs with ATN stop the recombination of the electronic process. The conversion efficiency of TiO₂ photoelectrode-based DSSCs was 4.74%; it was increased to 6.13% after adding 5 wt.% ATN into TiO₂ films. The electron lifetime of DSSCs with ATN increased from 0.29 to 0.34 s and that electron recombination was reduced.