关于超临界萃取过程中使用夹带剂的研究

建立了一套研究夹带剂的超临界萃取装置。在胡罗卜素及罗汉果糠甙的萃取中,分别使用丙酮和乙醇做夹带剂,研究它们对溶解度、收率及选择性的影响。     

α-萘乙酸与β-萘酚在含夹带剂超临界CO2中溶解度的研究

采用流动法，以乙醇、丙酮、环己烷为夹带剂，测定了固体溶质α-萘乙酸在超临界CO2中的溶解度，并与相应的β-萘酚的溶解度进行了对比研究。试验结果表明，溶质溶解度随压力的升高而增大；高压下高温萃取有利，低压下低温萃取有利；无论何种夹带剂的加入，均能在一定程度上增加溶质的溶解度，但对于极性溶质，极性夹带剂对其溶解度的提高作用更加显著。     

红外光谱测量法研究超临界CO2中夹带剂与溶质的相互作用

利用红外光谱技术研究了在超临界CO₂中加入不同夹带剂时,水杨酸中基团的伸缩振动频率的位移及夹带剂与溶质的相互作用。以乙醇为夹带剂时,水杨酸中C=O基团、O—H基团的伸缩振动频率均向低频方向移动;以丙酮为夹带剂时,水杨酸中C=O基团伸缩振动频率向高频方向移动。研究结果表明：当以乙醇为夹带剂时,水杨酸的溶解度远大于以丙酮为夹带剂时的结果,夹带剂对溶质增溶的作用能力,形成氢键的作用远大于溶剂极性的作用。     

2-萘酚与苯甲酸在含夹带剂的超临界流体中溶解度的研究

在自建的超临界流体溶解度实验装置中，测定了固体溶质2—萘酚、苯甲酸在超临界CO2中的溶解度，实验对该类物质的超临界萃取提供了基础数据。对数据的分析讨论表明，随着压力的升高，物质的溶解度增高；随着温度的升高，溶解度的变化比较复杂，在低于特定压力(转变压力)时，温度升高，溶解度增高；在高于特定压力时，温度升高，溶解度降低；夹带剂可以大大提高固体溶质的溶解度，不同的夹带剂，所起作用大小不同；夹带剂的极性、氢键作用对溶解度的提高起着很重要的作用。     

苯甲酸在含夹带剂的超临界CO2中溶解度的研究

采用流动法研究和测定了苯甲酸在35、50℃下,10.0—30.0MPa范围内,在纯超临界CO2和含醇系列夹带剂的超临界CO2中的溶解度。实验研究表明,醇系列夹带剂的加入均可明显增大苯甲酸的溶解度,但4种醇的增强作用随着碳链的增加而略有减弱。论述了温度、压力对溶解度的影响,并用Sovova方程对实验数据进行了回归。     

普瑞巴林晶型Ⅰ在纯溶剂及丙酮-水混合溶剂中的溶解度测定与关联

通过平衡法测定了283.15~328.15 K温度下普瑞巴林晶型I在水、甲醇、乙醇、丙酮、四氢呋喃、N,N-二甲基甲酰胺、乙酸乙酯及丙酮-水混合溶剂中的溶解度,实验结果表明:普瑞巴林晶型I在所测定的所有纯溶剂及丙酮-水混合溶剂中的溶解度均随温度的升高而增大;在丙酮-水混合溶剂中,溶解度随着丙酮的摩尔分数的增加而降低,在丙酮的摩尔分数达到0.83附近时溶解度最小,接近0。采用修订的Apelblat经验方程和(CNIBS)/Redlich-Kister方程对溶解度数据进行关联,结果令人满意。所得实验数据和拟合模型为普瑞巴林在工业结晶及药物多晶型等方面的研究提供了重要的依据。     

固体溶质在含夹带剂超临界流体中的溶解度(Ⅱ)——准液体模型

推导和建立了计算固体溶质在含夹带剂超临界流体中溶解度的准液体模型。结果表明,理论计算值与文献数据和本文实验数据均有较好的吻合。     

夹带剂对超临界流体中固体溶解度的作用分析

测定了2-羟基苯甲酸在308.15K和328.15K,10.0-25.0MPa条件下,在含和不含夹带剂的超临界CO2中的溶解度数据;分析了夹带剂对超临界流体中固体溶质溶解度的作用机理,得到选择夹带剂的一般原则。     

苯甲酸在含不同夹带剂的超临界CO2中的溶解度

利用流动法分别测定了苯甲酸在温度308.15, 318.15, 328.15 K、压力范围8.0~23.0 MPa时,在纯超临界CO2及以乙醇、乙酸乙酯、乙二醇为夹带剂的超临界CO2中的溶解度. 研究结果表明,三种夹带剂的加入均可以不同程度地提高苯甲酸的溶解度,其增大幅度为乙醇>乙二醇>乙酸乙酯. 此外还探讨了温度、压力对苯甲酸在超临界CO2中溶解度的影响,以及夹带剂的作用机理,并用Sovova方程对实验数据进行回归,得到了较满意的结果.     

夹带剂性质对超临界二氧化碳萃取的影响

介绍了夹带剂在超临界CO2萃取中的作用和原理，分析了夹带剂分子极性、相对分子质量、分子体积及特殊分子结构等性质对超临界CO2萃取的影响，总结出夹带剂性质对萃取率的变化规律：夹带剂的分子极性越大，溶质在超临界CO2中的溶解度越大；夹带剂的相对分子质量、分子体积的增大，其在超临界CO2中的溶解度减小，萃取率减小；夹带剂中易形成氢键的特殊分子结构，可提高萃取率。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。