Recent progress in freeze-fracturing of high-pressure frozen samples

Pancreatic tissue, bacteria and lipid vesicles were high‐pressure frozen and freeze‐fractured. In addition to the normal holder, a new type of high‐pressure freezing holder was used that is particularly suitable for suspensions. This holder can take up an EM grid that has been dipped in the suspension and clamped in between two low‐mass copper platelets, as used for propane‐jet freezing. Both the standard and the new suspension holder allowed us to make cryo‐fractures without visible ice crystal damage. High‐pressure frozen rat pancreas tissue samples were cryo‐fractured and cryo‐sectioned with a new type diamond knife in the microtome of a freeze‐etching device. The bulk fracture faces and blockfaces were investigated in the frozen‐hydrated state by use of a cryo‐stage in an in‐lens SEM. Additional structures can be made visible by controlled sublimation of ice (‘etching’), leading to a better understanding of the three‐dimensional organization of organelles, such as the endoplasmic reticulum. With this approach, relevant biological structures can be investigated with a few nanometre resolution in a near life‐like state, preventing the artefacts associated with conventional fixation techniques.     

Rapid freeze-substitution preserves membranes in high-pressure frozen tissue culture cells

We describe a method for high‐pressure freezing and rapid freeze‐substitution of cells in tissue culture which provides excellent preservation of membrane detail with negligible ice segregation artefacts. Cells grown on sapphire discs were placed ‘face to face’ without removal of tissue culture medium and frozen without the protection of aluminium planchettes. This reduction in thermal load of the sample/holder combination resulted in freezing of cells without visible ice‐crystal artefact. Freeze‐substitution at −90°C for 60 min in acetone containing 2% uranyl acetate, followed by warming to −50°C and embedding in Lowicryl HM20 gave consistent and clear membrane detail even when imaged without section contrasting. Preliminary data indicates that the high intrinsic contrast of samples prepared in this way will be valuable for tomographic studies. Immunolabelling sensitivity of sections of samples prepared by this rapid substitution technique was poor; however, reducing the uranyl acetate concentration in the substitution medium to 0.2% resulted in improved labelling. Samples substituted in this lower concentration of uranyl acetate also gave good membrane detail when imaged after section contrasting.     

The use of filter membranes for high-pressure freezing of cell monolayers

Rapid freezing of cells and tissues, followed by freeze‐substitution fixation and plastic embedding, has become a highly reliable method for preparing samples for imaging in the electron microscope. High‐pressure freezing is an efficient means of immobilizing suspensions of yeasts, thick pellets of mammalian cells, or small (< 0.5 mm) pieces of plant or animal tissue. Monolayers of cultured mammalian cells that are too thick for efficient immobilization by other modes of rapid freezing have also been successfully preserved by this method. Monolayer cultures are often important because they can be imaged by light microscopy (LM) both before and after their preparation for electron microscopy (EM). Additionally, some monolayer cultures serve as model systems for physiological processes, so it is important that cells under study can grow on a substrate that is both physiologically appropriate and convenient for EM processing. Here we describe a reliable method for preparing mammalian cell monolayers (PtK₁ and polarized MDCK) for EM. Our protocol results in good preservation of cellular ultrastructure, it is a useful companion to studies of cell physioloy and, with some limitation, is suitable for correlative LM and EM.     

Freeze substitution of high-pressure frozen samples: the visibility of biological membranes is improved when the substitution medium contains water

Biological membranes are often poorly visible with the electron microscope after high‐pressure freezing and freeze‐substitution. The water content of the sample and of the substitution medium is one factor among others that strongly influences membrane visibility. In order to investigate this effect, high‐pressure frozen yeast cells, rat‐pancreas tissue and arthropod tissue were freeze‐substituted with and without adding water to the substitution medium. The visibility of the biological membranes was generally improved if the substitution medium contained 1–5% water. The effect was especially pronounced in yeast cells, where membrane visibility was poor after freeze‐substitution with water‐free medium but good after addition of 5% water to the substitution medium.     

A rapid microbiopsy system to improve the preservation of biological samples prior to high-pressure freezing

A microbiopsy system for fast excision and transfer of biological specimens from donor to high‐pressure freezer was developed. With a modified, commercially available, Promag 1.2 biopsy gun, tissue samples can be excised with a size small enough (0.6 mm × 1.2 mm × 0.3 mm) to be easily transferred into a newly designed specimen platelet. A self‐made transfer unit allows fast transfer of the specimen from the needle into the specimen platelet. The platelet is then fixed in a commercially available specimen holder of a high‐pressure freezing machine (EM PACT, Leica Microsystems, Vienna, Austria) and frozen therein. The time required by a well‐instructed (but not experienced) person to execute all steps is in the range of half a minute. This period is considered short enough to maintain the excised tissue pieces close to their native state. We show that a range of animal tissues (liver, brain, kidney and muscle) are well preserved. To prove the quality of freezing achieved with the system, we show vitrified ivy leaves high‐pressure frozen in the new specimen platelet.     

Freeze-substitution of plant tissues with a new medium containing dimethoxypropane*

Meristematic cells from root tips of Dahlia variabilis (L.) and highly vacuolated storage parenchyma cells of Helianthus tuberosus (L.) were fixed by the high-pressure freezing technique and freeze-substituted. A new water-free medium for freeze-substitution was developed to obtain better preservation of the ultrastructure of plant tissues. Adding dimethoxypropane (DMP) to the substitution medium gave two positive results: (1) water could be withdrawn from the samples without an exchange of the medium and without adding drying agents or working in a nitrogen atmosphere, and (2) the ultrastructural preservation of the substituted tissues was better than in a methanol medium and at least as good as in tissues fixed chemically at room temperature.     

An improved procedure for low-temperature embedding of high-pressure frozen and freeze-substituted plant tissues resulting in excellent structural preservation and contrast

Here we describe refinements in the processing of high-pressure frozen samples of delicate plant tissues for immuno-electron microscopy. These involve: shortened freeze-substitution schedules, lower temperatures during processing and polymerisation, the avoidance of temperature fluctuations and the optimisation of heat transfer from the specimens using small disposable aluminium containers. The application of these modifications leads to very good structural preservation and selective membrane contrast. As a result, the versatility of the method is increased since not only immuno-electron microscopical studies can be performed but often the quality is also quite suitable for structural investigations.     

A new approach for cryofixation by high-pressure freezing

A newly designed high-pressure freezing machine for cryofixation was established and tested (Leica EMPACT), based on ideas originally proposed by Moor & Riehle in 1968. The new machine, essentially an improved version of our prototype, pressurizes the sample to 2000 bar in a small container (using methylcyclohexane as hydraulic fluid) and at the same time cools the outer surface of the container with a jet of liquid nitrogen. The advantage of this approach is that the machine uses little liquid nitrogen and can be built small and light. The machine is able to vitrify and freeze well a variety of specimens, for example, plant leaves, yeast cells, liver or nerve tissue (more samples are shown at: http://www.ana.unibe.ch/empact ). Cooling efficiency is the same as in the traditional machines that use liquid nitrogen to pressurize and simultaneously cool the sample.     

Aclar discs: a versatile substrate for routine high-pressure freezing of mammalian cell monolayers

High‐pressure freezing avoids the artefacts induced by conventional chemical fixation, and, in combination with freeze‐substitution and plastic embedding, is a reliable method for the ultrastructural analysis of mammalian cell monolayers. In order to high‐pressure freeze mammalian cell monolayers, cells have to be seeded on a suitable substrate. Unfortunately, electron microscopy analysis is often hampered by poor cell growth, changes in cell morphology induced by the cell substrate or cell loss during processing. We report a method to culture, high‐pressure freeze, freeze‐substitute and plastic embed mammalian cell monolayers. The method is based on the use of Aclar, a copolymer film with properties very similar to those of tissue culture plastic. We show that Aclar discs support the normal growth and morphology of a wide variety of mammalian cell types, and form an ideal starting point for high‐pressure freezing, freeze‐substitution and plastic embedding. We present a complete protocol, which, because of its simplicity and reproducibility, provides a method suitable for the routine analysis of mammalian cell monolayers by electron microscopy and tomography.     

Freeze-substitution: the addition of water to polar solvents enhances the retention of structure and acts at temperatures around –60°C

High‐pressure freezing followed by freeze substitution and plastic embedding is becoming a more widely used method for TEM sample preparation. Here, we have investigated the influence of solvents, fixative concentrations and water content in the substitution medium on the sample quality of high‐pressure frozen, freeze‐substituted and plastic embedded mammalian cell culture monolayers. We found that the visibility of structural details was optimal with acetone and that extraction increased with both increasing and decreasing solvent polarity. Interestingly, the addition of water to polar solvents increased the sample quality, while being destructive when added to apolar solvents. The positive effect of water addition is saturable in acetone and ethanol at 5%(v/v), but even addition of up to 20% water has no negative effect on the sample structure. Therefore, a medium based on acetone containing fixatives and 5% water is most optimal for the substitution of mammalian cell cultures. In addition, our results suggest that the presence of water is critical for the retention of structure at temperatures around –60°C.     

Safe high-pressure freezing of infectious micro-organisms

We describe how high-pressure freezing of infectious biological material can safely be accomplished with the help of membrane carriers. The method described is easy to perform; however, careful manipulations are required. Existing safety regulations must still be followed. However, the procedure reduces the risk of dissemination of infectious material.     

A review of high-pressure freezing preparation techniques for correlative light and electron microscopy of the same cells and tissues

In this paper, we review some published studies using correlative light and electron microscopy methods. We further refined our criteria to include only those studies using live cells for light microscope and where high-pressure freezing was the method of specimen preparation for electron microscopy. High-pressure freezing is especially important for some difficult-to-fix samples, and for optimal preservation of ultrastructure in samples larger than a few micrometres. How the light microscope observations are done is completely sample dependent, but the choice of high-pressure freezer depends on the speed required to capture (freeze) the biological event of interest. For events requiring high time resolution (in the 4–5 s range) the Leica EM PACT2 with rapid transfer system works well. For correlative work on structures of interest that are either non-motile or moving slowly (minutes rather than seconds), any make of high-pressure freezer will work. We also report on some efforts to improve the capabilities of the Leica EM PACT2 rapid transfer system.     

A device for freeze-substituting a large number of samples under controlled conditions

An inexpensive device for reproducible freeze-substitution is described. The equipment consists of a reciprocating shaker, holding vials of substitution fluid, mounted in the gas phase of a large liquid nitrogen refrigerator. The shaker temperature is controlled by a programable microprocessor.     

Vitrification of articular cartilage by high-pressure freezing

For more than 20 years, high-pressure freezing has been used to cryofix bulk biological specimens and reports are available in which the potential and limits of this method have been evaluated mostly based on morphological criteria. By evaluating the presence or absence of segregation patterns, it was postulated that biological samples of up to 600 μm in thickness could be vitrified by high-pressure freezing. The cooling rates necessary to achieve this result under high-pressure conditions were estimated to be of the order of several hundred degrees kelvin per second. Recent results suggest that the thickness of biological samples which can be vitrified may be much less than previously believed. It was the aim of this study to explore the potential and limits of high-pressure freezing using theoretical and experimental methods. A new high-pressure freezing apparatus (Lei?a EM HPF), which can generate higher cooling rates at the sample surface than previously possible, was used. Using bovine articular cartilage as a model tissue system, we were able to vitrify 150-μm-thick tissue samples. Vitrification was proven by subjecting frozen-hydrated cryosections to electron diffraction analysis and was found to be dependent on the proteoglycan concentration and water content of the cartilage. Only the lower radical zone (with a high proteoglycan concentration and a low water content compared to the other zones) could be fully vitrified. Our theoretical calculations indicated that applied surface cooling rates in excess of 5000 K/s can be propagated into specimen centres only if samples are relatively thin (<200 μm). These calculations, taken together with our zone-dependent attainment of vitrification in 150-μm-thick cartilage samples, suggest that the critical cooling rates necessary to achieve vitrification of biological samples under high-pressure freezing conditions are significantly higher (1000–100 000 K/s) than previously proposed, but are reduced by about a factor of 100 when compared to cooling rates necessary to vitrify biological samples at ambient pressure.     

Electron-beam-induced amorphization of ice III or IX obtained by high-pressure freezing

Cryo-electron microscopy of vitrified specimens makes it possible to observe fully hydrated biological samples unimpaired by chemical fixation, staining and dehydration. High-pressure freezing represents important progress since it allows a 10-fold increase in the vitrification depth. High-pressure freezing can also induce the formation of undesirable high-pressure forms of ice. We show that ice III or IX is amorphized under the electron beam at a dose of about 2400 electronsnm⁻² and that the resulting amorphous ice is similar to the vitreous water obtained by high-pressure freezing.     

High-pressure freezing causes structural alterations in phospholipid model membranes

The influence of high-pressure freezing (HPF) on the lipid arrangement in phospholipid model membranes has been investigated. Liposomes consisting of pure dipalmitoylphosphatidylcholine (DPPC) and of DPPC mixed with a branched-chain phosphocholine (1,2-di(4-dodecyl-palmitoyl)-sn-glycero-3-phosphocholine) have been analysed by freeze-fracture electron microscopy. The liposomes were frozen either by plunging into liquid propane or by HPF. The characteristic macroripple-phase of the two-component liposome system is drastically changed in its morphology when frozen under high-pressure conditions. The influence of ethanol which acts as pressure transfer medium was ruled out by control experiments. In contrast, no high-pressure alterations of the pure DPPC bilayer membrane have been observed. We assume that the modification of the binary system is due to a pressure-induced relaxation of a stressed and unstable lipid molecule packing configuration. HPF was performed with a newly designed sample holder for using sandwiched copper platelets with the high-pressure freezing machine Balzers HPM010. The sandwich construction turned out to be superior to the original holder system with regard to freeze-fracturing of fluid samples. By inserting a spacer between the supports samples with a thickness of 20–100 μm can be high-pressure frozen. The sandwich holder is provided with a thermocouple to monitor cooling rates and allows exact sample temperature control. Despite a two-fold mass reduction compared to the original holder no HPF cooling rate improvement has been achieved (4000 °C s⁻¹). We conclude that the cooling process in high-pressure freezing is determined mainly by cryogen velocity.     

Optimal preparatory procedures of cryofixation for immunocytochemistry

To examine the optimal preparatory procedures of cryofixation for immunocytochemistry, the labeling density over the antigenic sites in cells processed by various protocols of freeze-substitution and embedding was quantitatively evaluated. Fresh tissue blocks of gerbil parotid gland were quickly frozen by a metal contact method using liquid helium and freezesubstituted with one of the following media: 4% OsO₄ in acetone or 0.4% OsO₄ in acetone or 0.3% glutaraldehyde in acetone. They were then embedded in either an Epon-Araldite mixture or Araldite 6005, which were polymerized at 60°C and 50°C, respectively. Some frozen samples substituted with aldehyde-containing acetone were embedded in Lowicryl K4M (polymerized at —30°C). Immunocytochemical localization of amylase was examined by indirect immunostaining by using antigerbil parotid amylase antibody and protein A/gold complex. Thin sections of epoxyresin-embedded materials were treated with oxidizing agents before immunostaining. The central dense core of heterogeneous secretory granules in the acinar cells was heavily labeled with immunogold, regardless of substitution media and embedding resins employed. The labeling density on thin sections of all the cryofixed materials examined was about 1.5 times or more as high as in those processed by conventional chemical fixation. The highest value of the labeling density was obtained from material which was substituted with 0.3% glutaraldehyde in acetone and embedded in Araldite 6005. Substitution with osmium-containing acetone appeared not to seriously affect immunoreactivity of the antigenic sites and was advantageous because of the distinctive images of membranes. Advantages and disadvantages of the individual protocols employed are discussed.     

Ultrastructure of the frog retina after high-pressure freezing and freeze substitution

In many types of tissue, high-pressure freezing (HPF), followed by freeze substitution, can produce excellent ultrastructural preservation at depths over 10 times that obtained by other cryofixation techniques. However, in the case of neural tissue, the benefits of HPF have not been realized. In the present study, isolated frog ( Rana pipiens) retina was sliced at a thickness of 150 or 350 μm, rapidly frozen in a Balzers HPM 010 high-pressure freezer, and freeze substituted with 1% OsO₄ and 0.1% tannic acid in acetone. Specially designed HPF chambers and specific freezing media (35% high-MW dextran for 150-μm slices or 15% low-MW dextran for 350-μm slices) were required for adequate freezing.
The quality of preservation after HPF was excellent throughout the retina in both the 150- and 350-μm slices, compared with chemically fixed slices. Specifically, HPF resulted in better preserved cellular, mitochondrial and nuclear membranes in all retinal layers.
This is the first study to successfully cryofix all of the layers of the retina. The increased depths of adequate freezing achieved by HPF should facilitate various ultrastructural studies of retina, as well as of other CNS tissues, where preservation approaching that of the 'native' state is required.