Amperometric assessment of glucose electrode behaviour in mixed solvents and determination of glucose in dairy products

An amperometric biosensor based on a ruthenium(III), nickel(II) and iron(II) hexacyanometallate (HCM)-modified graphite electrode and immobilized glucose oxidase has been used for the determination of glucose in water-miscible organic solvent/aqueous buffer mixtures. Although the specific activity of biochemically active molecule such as enzyme is reduced in organic environment, it was established that the presence of water soluble organic solvents such as methanol, ethanol and acetonitrile (φ = 10%) enhance the biosensor response. Hydrogen peroxide, produced by enzyme-catalysed reduction of glucose, was measured in phosphate buffer solution (pH = 6.86) at −50 mV against a reference Hg|Hg₂Cl₂|3 M KCl electrode to determine the concentration of glucose. The influence of the addition of different volume fractions (φ = 10–60%) of methanol, ethanol, acetone, acetonitrile and isopropanol on biosensor response was investigated. The obtained amperometric signals were fast, reproducible and linearly proportional to glucose concentrations in the range of 0.1–0.8 mM, with a squared correlation coefficient of 0.9994 for buffer solution. With the addition of ethanol (φ = 10% and 40%) the plateau on I/c curve was obtained for concentrations of glucose higher than 0.8 and 1.1 mM, respectively. The biosensor proved to be stable for several months. The recoveries of added glucose (0.200 and 0.300 mM) from aqueous solution and from solution with ethanol φ = 10% ranged from 96.0% to 108.0%. The biosensor was used for the determination of glucose in some food samples of dairy industry, and the results were consistent with those obtained with the commercially available glucose enzyme photometric kit.     

Optimisation of the solvent extraction of bioactive compounds from Parkia speciosa pod using response surface methodology

Central composite design was employed to optimise the buffer-to-solids ratio (X₁: 20–50 ml/g), incubation temperature (X₂: 35–55 °C) and time (X₃: 100–200 min), obtaining extracts from Parkia speciosa pod with high total phenolic and flavonoid contents and high antioxidant activities. Analysis of variance showed that the contribution of a quadratic model was significant for the responses. An optimisation study using response surface methodology was performed and 3D response surfaces were plotted from the mathematical models. The optimal conditions based on combination responses were: X₁ = 20 ml/g, X₂ = 35–36 °C and X₃ = 100–102 min. These optimum conditions yielded total phenolic contents of 664–668 mg gallic acid equivalents/100 g, total flavonoid contents of 47.4–49.6 mg pyrocatechol equivalents/100 g, %DPPH_sc of 81.2–82.1%, %ABTS_sc of 78.2–79.8% and FRAP values of 3.2–3.3 mM. Close agreement between experimental and predicted values was found. This methodology could be applied in the extraction of bioactive compounds in the natural product industry.     

Evaluation of ability of ferulic acid to control growth and fumonisin production of Fusarium verticillioides and Fusarium proliferatum on maize based media

The aim of this study was to evaluate the efficacy of ferulic acid (1, 10, 20 and 25 mM) at different water activity (a_w) values (0.99, 0.98, 0.96 and 0.93) at 25 °C on growth and fumonisin production by Fusarium verticillioides and Fusarium proliferatum on maize based media. For both Fusarium species, the lag phase significantly decreased (p ≤ 0.001), and the growth rates increased (p ≤ 0.001) at the lowest ferulic acid concentration used (1 mM), regardless of the a_w. However, high doses of ferulic acid (10 to 25 mM) significantly reduced (p ≤ 0.001) the growth rate of both Fusarium species, regardless of the a_w. In general, growth rate inhibition increased as ferulic acid doses increased and as media a_w decreased. Fumonisin production profiles of both Fusarium species showed that low ferulic acid concentrations (1–10 mM) significantly increased (p ≤ 0.001) toxin production, regardless of the a_w. High doses of ferulic acid (20–25 mM) reduced fumonisin production, in comparison with the controls, by both Fusarium species but they were not statistically significant in most cases. The results show that the use of ferulic acid as a post-harvest strategy to reduce mycotoxin accumulation on maize needs to be discussed.     

Characterisation of thermostable trypsin and determination of trypsin isozymes from intestine of Nile tilapia (Oreochromis niloticus L.)

Trypsin from intestinal extracts of Nile tilapia (Oreochromis niloticus L.) was characterised. Three-step purification – by ammonium sulphate precipitation, Sephadex G-100, and Q Sepharose – was applied to isolate trypsin, and resulted in 3.77% recovery with a 5.34-fold increase in specific activity. At least 6 isoforms of trypsin were found in different ages. Only one major trypsin isozyme was isolated with high purity, as assessed by SDS-PAGE and native-PAGE zymogram, appearing as a single band of approximately 22.39 kDa protein. The purified trypsin was stable, with activity over a wide pH range of 6.0–11.0 and an optimal temperature of approximately 55–60 °C. The relative activity of the purified enzyme was dramatically increased in the presence of commercially used detergents, alkylbenzene sulphonate or alcohol ethoxylate, at 1% (v/v). The observed Michaelis–Menten constant (K_m) and catalytic constant (K_cat) of the purified trypsin for BAPNA were 0.16 mM and 23.8 s⁻¹, respectively. The catalytic efficiency (K_cat/K_m) was 238 s⁻¹ mM⁻¹.     

An extra-cellular alkaline metallolipase from Bacillus licheniformisMTCC 6824: Purification and biochemical characterization

An extra-cellular lipase produced by Bacillus licheniformis MTCC 6824 was purified to homogeneity by ammonium sulphate fractionation, ethanol/ether precipitation, dialysis, followed by anion-exchange chromatography on Amberlite IRA 410 (Cl⁻ form) and gel exclusion chromatography on Sephadex G 100 using Tris–HCl buffer (pH 8.0). The crude lipase extract had an activity of 41.7 LU/ml of culture medium when the bacterium was cultured for 48 h at 37 °C and pH 8.0 with nutrient broth supplemented with sardine oil as carbon source. The enzyme was purified 208-fold with 8.36% recovery and a specific activity of 520 LU/mg after gel exclusion chromatography. The pure enzyme is a monomeric protein and has an apparent molecular mass of 74.8 kDa. The lipase had a V_max and K_m of 0.64 mM/mg/min and 29 mM, respectively, with 4-nitro phenylpalmitate as a substrate, as calculated from the Lineweaver–Burk plot. The lipase exhibited optimum activity at 45 °C and pH 8.0, respectively. The enzyme had half-lives (T_1/2) of 82 min at 45 °C, and 48 min at 55 °C. The catalytic activity was enhanced by Ca²⁺ (18%) and Mg²⁺ (12%) at 30 mM. The lipase was inhibited by Co²⁺, Cu²⁺, Zn²⁺, Fe² even at low concentration (10 mM). EDTA, at 70 mM concentration, significantly inhibited the activity of lipase. Phenyl methyl sulfonyl fluoride (PMSF, 70 mM) completely inactivated the original lipase. A combination of Ca²⁺ and sorbitol induced a synergistic effect on the activity of lipase with a significantly high residual activity (100%), even after 45 min, as compared to 91.5% when incubated with Ca²⁺ alone. The lipase was found to be hydrolytically resistant toward triacylglycerols with more double bonds.     

Determination of trans-resveratrol in red wine by adsorptive stripping square-wave voltammetry with medium exchange

In the present paper, a method for the determination of trans-resveratrol in red wine samples, by adsorptive stripping square-wave voltammetry (Ad-SSWV) in a glassy carbon electrode, is presented. In 0.10 M perchloric medium, trans-resveratrol experiments an adsorptive–oxidative process, which promotes the appearance of a peak at 0.72 V. Calibration graph have been constructed from 5.0 to 35 ng/mL. Detection limit of 4.2 ng/mL has been calculated, according to Clayton criterion. Extraction of trans-resveratrol from red wine with diethylether and posterior clean-up with C18 cartridges is carried out. Recovery percentages close to 100% have been calculated with different red wine samples. The accumulation of analyte in the electrode is carried out at +0.60 V for 60 s, in the presence of 0.10 M HClO₄ and 10% of ethanol; the measurement stage is performed after a medium exchange, in 0.10 M HClO₄ and 30% of ethanol. The standard addition method was employed for the analysis of real samples, since a matrix effect is observed in red wine extract. The method has been applied to several commercial red wines samples, and the results have been satisfactorily validated by HPLC.     

α-Glucosidase inhibitors from Chinese Yam (Dioscoreaopposita Thunb.)

The inhibitory activities of crude extracts and purified constituents from the fresh tuberous rhizomes of Chinese Yam (Dioscorea opposita Thunb.), which is commonly called Huai Shan Yao in Chinese, were evaluated against yeast α-glucosidase in order to search for the active principals for treatment of diabetes. Bioassay-guiding isolation gave four compounds: trans-N-p-coumaroyltyramine (1) (IC₅₀ = 0.40 μM), 1,7-bis(4-hydroxyphenyl)heptane-3,5-diol (2) (IC₅₀ = 0.38 mM), 6-hydroxy-2,4,7-trimethoxyphenanthrene (3) (IC₅₀ = 0.77 mM) as α-glucosidase inhibitors, and cis-N-p-coumaroyltyramine (4), an isomer of compound 1, which showed no inhibitory activity against α-glucosidase. Furthermore, the separation and purification of compound 3 from Chinese Yam (Huai Shan Yao) was conducted by high-speed counter-current chromatography (HSCCC) using hexane–ethyl acetate–methanol–water (1:1:1:1, v/v/v/v). Compound 1, 2 and 4 were isolated from or detected in the Dioscoreaceae family for the first time.     

Addition of ethanol to supercritical carbon dioxide enhances the inactivation of bacterial spores in the biofilm of Bacillus cereus

Supercritical carbon dioxide (SC-CO₂) was used to inactivate Bacillus cereus spores inside biofilms, which were grown on stainless steel. SC-CO₂ treatment was tested using various conditions, such as pressure treatment (10–30 MPa), temperature (35–60 °C), and time (10–120 min). B. cereus vegetative cells in the biofilm were completely inactivated by treatment with SC-CO₂ at 10 MPa and at 35 °C for 5 min. However, SC-CO₂ alone did not inactivate spores in biofilm even after the treatment time was extended to 120 min. When ethanol was used as a cosolvent with SC-CO₂ in the SC-CO₂ treatment using only 2–10 ml of ethanol in 100 ml of SC-CO₂ vessel for 60–90 min of treatment time at 10 MPa and 60 °C, B. cereus spores in the biofilm were found to be completely inactivated in the colony-forming test. We also assessed the viability of SC-CO₂-treated bacterial spores and vegetative cells in the biofilm by staining with SYTO 9 and propidium iodide. The membrane integrity of the vegetative cells was completely lost, while the integrity of the membrane was still maintained in most spores. However, when SC-CO₂ along with ethanol was used, both vegetative cells and spores lost their membrane integrity, indicating that the use of ethanol as a cosolvent with SC-CO₂ is efficient in inactivating the bacterial spores in the biofilm.     

Purification and characterization of membrane-bound polyphenoloxidase (mPPO) from Snake fruit [Salacca zalacca (Gaertn.) Voss]

Membrane-bound polyphenoloxidase (mPPO) an oxidative enzyme which is responsible for the undesirable browning reaction in Snake fruit (Salacca zalacca (Gaertn.) Voss) was investigated. The enzyme was extracted using a non-ionic detergent (Triton X-114), followed by temperature-induced phase partitioning technique which resulted in two separate layers (detergent-poor phase at the upper layer and detergent-rich phase at the lower layer). The upper detergent-poor phase extract was subsequently fractionated by 40–80% ammonium sulfate and chromatographed on HiTrap Phenyl Sepharose and Superdex 200 HR 10/30. The mPPO was purified to 14.1 folds with a recovery of 12.35%. A single prominent protein band appeared on native-PAGE and SDS–PAGE implying that the mPPO is a monomeric protein with estimated molecular weight of 38 kDa. Characterization study showed that mPPO from Snake fruit was optimally active at pH 6.5, temperature 30 °C and active towards diphenols as substrates. The K_m and V_max values were calculated to be 5.46 mM and 0.98 U/ml/min, respectively, when catechol was used as substrate. Among the chemical inhibitors tested, l-cysteine showed the best inhibitory effect, with an IC₅₀ of 1.3 ± 0.002 mM followed by ascorbic acid (1.5 ± 0.06 mM), glutathione (1.5 ± 0.07 mM), EDTA (100 ± 0.02 mM) and citric acid (186 ± 0.16 mM).     

Characterisation of a thermostable family 42 β-galactosidase from Thermotoga maritima

A β-galactosidase gene (TM_0310) of Thermotoga maritima MSB8 was expressed in Escherichia coli. The recombinant β-galactosidase (designated BgalB) was purified to homogeneity by heat treatment and Ni-NTA affinity chromatography. BgalB belongs to the glycoside hydrolase family 42. Its molecular mass was estimated to be 78 kDa and 76 kDa by SDS–PAGE and gel filtration, respectively. The enzyme was optimum at pH 5.5, and it was quite stable over the pH range 5.0–11.4 at 70 °C. It was optimally active at 80 °C and was stable up to 75 °C. Besides, BgalB exhibited broad substrate specificity with a preference for p-nitrophenyl-β-galactopyranoside (pNPGal). K_m values of the purified enzyme for pNPGal, o-nitrophenyl-β-galactopyranoside (oNPGal) and pNP-β-fucopyranoside were 2.7 mM, 12.5 mM and 1.4 mM, respectively. These properties make this enzyme an interesting candidate for biotechnological applications. This is the first report of the family 42 β-galactosidases from T. maritima.     

Characterisation of a β-N-acetylhexosaminidase from a commercial papaya latex preparation

A β-N-acetylhexosaminidase (β-NAHA) (EC 3.2.1.52) with molecular mass of 64.1 kDa and isoelectric point of 5.5 was purified from a commercial papaya latex preparation. The optimum pH for p-nitrophenyl-N-acetyl-β-d-glucosaminide (pNP-β-GlcNAc) hydrolysis was five; the optimum temperature was 50 °C; the K_m was 0.18 mM, V_max was 37.6 μmol min⁻¹ mg⁻¹ and activation energy (E_a) was 10.3 kcal/mol. The enzyme was thermally stable after holding at 30–45 °C for 40 min, but its activity decreased significantly when the temperature exceeded 50 °C. Heavy metal ions, Ag⁺ and Hg²⁺, at a concentration of 0.25 mM and Zn²⁺ and Cu²⁺, at a concentration of 0.5 mM, significantly inhibited enzyme activity. The β-NAHA had only one active site for binding both pNP-β-GlcNAc and p-nitrophenyl-N-acetyl-β-d-galactosaminide (pNP-β-GalNAc). A prototropic group with pKa value of about five on the enzyme may be involved in substrate binding and transformation, as examined by Dixon–Webb plots.     

Determination of calcium in milk and water samples by using catalase enzyme electrode

A biosensor based on catalase enzyme was developed for the investigation of the effect of calcium ions on the activity of the enzyme. Calcium plays an activator role for the catalase enzyme that catalyses the degradation of hydrogen peroxide to O₂ and H₂O. Determination method of the effect of calcium ion on the activity of the enzyme was based on the assay of the differences on the responses of the biosensor in the absence and the presence of calcium in the reaction medium. The biosensor had a linear relation to calcium concentrations and good measurement correlation between 1 and 10 mM with 1 min response time. Tris–HCl buffer (pH 7.0; 50 mM) and 37 °C were obtained as the optimum working conditions. In the application studies, the biosensor was used determination of calcium level of real samples such as milk, spring and mineral water.     

Distribution of fungi and aflatoxins in a stored peanut variety

The objective of the present study was to evaluate the mycoflora and occurrence of aflatoxins in stored peanut samples (hulls and kernels) from Tupã, State of São Paulo, Brazil. The samples were analyzed monthly over a period of one year. The results showed a predominance of Fusarium spp. (67.7% in hulls and 25.8% in kernels) and Aspergillus spp. (10.3% in hulls and 21.8% in kernels), and the presence of five other genera. The growth of Aspergillus flavus was mainly influenced by temperature and relative humidity. Analysis of hulls showed that 6.7% of the samples were contaminated with AFB₁ (mean levels = 15–23.9 μg/kg) and AFB₂ (mean levels = 3.3–5.6 μg/kg); in kernels, 33.3% of the samples were contaminated with AFB₁ (mean levels = 7.0–116 μg/kg) and 28.3% were contaminated with AFB₂ (mean levels = 3.3–45.5 μg/kg). Analysis of the toxigenic potential revealed that 93.8% of the A. flavus strains isolated were producers of AFB₁ and AFB₂.     

Response surface optimisation for the extraction of phenolic compounds and antioxidant capacities of underutilised Mangifera pajang Kosterm. peels

The optimum extraction conditions for highest recovery of total phenolics content (TPC) and antioxidant capacities (AC) were analysed for Mangifera pajang peels (MPP), using response surface methodology. The effects of ethanol concentration (X₁: 20–80%), extraction temperature (X₂: 30–65 °C) and liquid-to-solid ratio (X₃: 20–50 mL/g) on the recovery of total phenolics (Y₁) and antioxidant capacity (Y₂) were investigated. A second order polynomial model produced a satisfactory fitting of the experimental data with regard to total phenolic content (R² = 0.9966, p < 0.0001) and antioxidant capacity (R² = 0.9953, p < 0.0001). The optimum extraction conditions for TPC were 68%, 55 °C and 32.7 mL/g, and for AC were 68%, 56 °C and 31.8 mL/g, respectively. Predicted values for extraction of TPC and AC agreed well with the experimental values. Liquid chromatography–mass spectrometry of the optimally obtained extracts from MPP revealed the major phytochemicals as mangiferin, gallic acid, catechin and epicatechin.     

Biochemical properties of two isoforms of trypsin purified from the Intestine of skipjack tuna (Katsuwonus pelamis)

Two trypsins (A and B) from the intestine of skipjack tuna (Katsuwonus pelamis) were purified by Sephacryl S-200, Sephadex G-50 and DEAE-cellulose with a 177- and 257-fold increase in specific activity and 23% and 21% recovery for trypsin A and B, respectively. Purified trypsins revealed a single band on native-PAGE. The molecular weights of both trypsins were 24 kDa as estimated by size exclusion chromatography and SDS–PAGE. Trypsin A and B exhibited the maximal activity at 55 °C and 60 °C, respectively, and had the same optimal pH at 9.0. Both trypsins were stable up to 50 °C and in the pH range from 6.0 to 11.0. Both trypsin A and B were stabilised by calcium ion. Activity of both trypsins continuously decreased with increasing NaCl concentration (0–30%) and were inhibited by the specific trypsin inhibitors – soybean trypsin inhibitor and N-p-tosyl-l-lysine chloromethyl ketone. Apparent K_m and K_cat of trypsin A and B were 0.22–0.31 mM and 69.5–82.5 S⁻¹, respectively. The N-terminal amino acid sequences of the first 20 amino acids of trypsin A and B were IVGGYECQAHSQPPQVSLNA and IVGGYECQAHSQPPQVSLNS, respectively.     

A NaCl-stable serine proteinase from Virgibacillus sp. SK33 isolated from Thai fish sauce

An extracellular proteinase from Virgibacillus sp. SK33, isolated from 1 month-old fish sauce, was purified to electrophoretic homogeneity, using hydrophobic interaction chromatography and hydroxyapatite with purification fold of 2.5 and 7% yield. The anomalous molecular weight (MW) of 19 kDa was obtained from SDS–PAGE, whereas a MW of 33.7 kDa was determined by MALDI-TOF. Optimum conditions for catalytic activity were 55 °C and pH 7.5. The proteinase was strongly inhibited by phenylmethanesulfonyl fluoride (PMSF) and preferentially hydrolysed Suc-Ala-Ala-Pro-Phe-AMC, indicating a serine proteinase with subtilisin-like characteristics. K_m and k_cat of the purified proteinase were 27 μM and 12 s⁻¹, respectively. Proteinase activity, toward both synthetic and anchovy substrates, increased with NaCl up to 25%. The proteinase exhibited high stability in both the absence and presence of NaCl up to 25%. Approximately 2.5-fold increase in activity was observed in the presence of divalent cations, including Ca²⁺, Mg²⁺ and Sr²⁺ at 100 mM. MALDI-TOF MS and LC–ESI-MS/MS analyses, as well as N-terminal sequences, revealed that the purified enzyme did not match microbial proteinases in the database, indicating it to be a novel proteinase.     

Characterisation of a thermostable family 42 β-galactosidase (BgalC) family from Thermotoga maritima showing efficient lactose hydrolysis

A β-galactosidase gene (TM_1195) of Thermotoga maritima was cloned and expressed in Escherichia coli. The recombinant β-galactosidase (BgalC), belonging to glycosyl hydrolase (GH) family 42, was purified to homogeneity with 23.4-fold purification and a recovery of 36.6%. Its molecular mass was estimated to be 78 kDa by SDS–PAGE. BgalC exhibited maximum activity at an optimal pH of 5.5 and an optimum temperature of 80 °C. The enzyme displayed important properties, such as stability over a broad pH range of 5.0–9.0 and thermostability up to 75 °C. K_m values of BgalC for p-nitrophenyl-β-galactopyranoside (pNPGal), o-nitrophenyl-β-galactopyranoside (oNPGal) and lactose were 1.21, 7.31 and 6.5 mM, respectively. BgalC was efficient in complete removal of lactose from milk. BgalC is significantly one of the few β-galactosidases from family 42 displaying significant hydrolysis of lactose. These properties make BgalC an ideal candidate for commercial use, in the production of lactose-free milk.     

Characterisation of an acidic peroxidase from papaya (Carica papaya L. cv Tainung No. 2) latex and its application in the determination of micromolar hydrogen peroxide in milk

An acidic peroxidase isoform, POD-A, with a molecular mass of 69.4 kDa and an isoelectric point of 3.5 was purified from papaya latex. Using o-phenylenediamine (OPD) as a hydrogen donor (citrate–phosphate as pH buffer), the optimum pH for the function of POD-A was 4.6, and the optimum temperature was 50 °C. The peroxidase activity of POD-A toward hydrogen donors was both pH- and concentration-dependent. Under optimal conditions, POD-A catalysed the oxidation of OPD at higher rates than pyrogallol, catechol, quercetin and 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). The chemical modification reagents N-bromosuccinimide and sodium azide significantly inhibited POD-A activity. The results of kinetic studies indicated that POD-A followed a ping-pong mechanism and had a K_m value of 2.8 mM for OPD. Using CPC silica-immobilised POD-A for the determination of micromolar H₂O₂ in milk, the lower limit of determination was 0.1 μM, and the recoveries of added H₂O₂ were 96–109%.     

Artocarpus integer leaf protease: Purification and characterisation

The presence of a protease in Artocarpus integer leaves, which are traditionally used as a meat tenderiser, was verified by the presence of a band at 69 kDa, using caseinolytic zymography. Purification by temperature phase partitioning with Triton X-114, ammonium sulphate precipitation and gel filtration chromatography yielded a preparation with a 12-fold increase in enzyme purity and a final specific activity of 76.67 U/mg. The cysteinic nature of this enzyme was confirmed through inhibition of enzyme activity by E-64 and iodoacetamide and enhancement of activity by cysteine and 2-mercaptoethanol. The protease retained 70% of its activity over a broad pH range (pH 6–12), with optimal activity recorded at pH 10 and 40 °C. The enzyme was stable at temperatures up to 70 °C, with 80% of its activity intact. Addition of 5 mM Ca²⁺ stimulated enzyme activity and a kinetic study of the enzyme yielded K_m and V_max values of 0.304 mg/mL and 0.735 mg/mL/min, respectively.