共查询到18条相似文献,搜索用时 140 毫秒
1.
2.
提出了一种阻带具有多个传输零点的带通滤波器设计方法,基于低温共烧陶瓷(LTCC)技术实现,可满足移动通信用滤波器小型化、高性能的要求。在电路设计中,通过改进滤波器谐振器结构,分别在阻带的低端近端、高端远端引入传输零点以提高带外抑制。借助三维仿真软件,进行指标、结构的仿真优化,设计并制作了一款尺寸为6 mm×3 mm×2 mm的LTCC滤波器,其中心频率f0=2.25 GHz,0.5 dB带宽不小于100 MHz,通带内损耗不大于1.8 dB,在1.33,1.78 GHz和二次谐波处均有传输零点。实测结果表明,该滤波器在阻带低端和二次谐波处有较好的抑制,因此其在移动通信系统中会有广泛应用。 相似文献
3.
4.
5.
6.
7.
应用LTCC多层耦合带状线谐振器和交叉耦合传输零点原理,在改进的三维梳状带通滤波器结构中引入交叉耦合,增强非相邻谐振级间的交叉耦合;在2、4谐振级间引入Z字形导体层,通过调节Z字形控制传输零点位置;同时适当调节加载电容大小,有效减小了滤波器体积,实现了高次谐波抑制、边带陡峭和通带内线性相位.采用低温共烧陶瓷(LTCC)技术设计制作了中心频率为3GHz,通带为200MHz的微型带通滤波器.实验和仿真结果表明,该滤波器的中心频率插入损耗小于2.6dB,阻带抑制高于40dB,边带陡峭,尺寸仅为4.8mm×4.2mm× 1.5mm.成品率高达85%. 相似文献
8.
介绍了一种基于低温共烧陶瓷(LTCC)技术实现的UHF波段高性能带通滤波器,其中心频率为490MHz。由于该滤波器频率较低、波长较长,为了减小滤波器的尺寸,本设计采用了半集总半分布结构来实现。通过增加传输零点和滤波器级联技术大大提高了滤波器的带外抑制度。借助三维仿真软件进行优化仿真,设计出了一个中心频率为490MHz、带宽为100MHz、带外抑制优于40dB、尺寸仅为6.4mm×4.0mm×1.5mm的带通滤波器。实测结果与电磁仿真结果较为吻合。 相似文献
9.
李章涛 《中国电子科学研究院学报》2010,5(2)
提出了一种新型的基于LTCC技术的带通滤波器实现方法。带通滤波器采用两个谐振单元耦合,在输入输出端引入并联反馈电容在通带两边形成一对传输零点,提高了阻带的衰减性能。分别在HFSS和IE3D中构建物理模型,采用εr=2.2的介质材料,尺寸为5 mm×4 mm×2 mm,设计出中心频率f0=1.6 GHz,相对带宽约9%的滤波器,通带内插入损耗小于1 dB,在1.1 GHz和2.1 GHz处形成两个传输零点,两种软件的仿真结果很好地吻合。 相似文献
10.
11.
Bandpass filter of serial configuration with two finite transmission zeros using LTCC technology 总被引:1,自引:0,他引:1
Chun-Fu Chang Shyh-Jong Chung 《Microwave Theory and Techniques》2005,53(7):2383-2388
This study proposes a second-order bandpass filter of serial configuration. The filter schema incorporates a grounding capacitor, connecting the two conventional parallel LC resonators with the ground, to provide two finite transmission zeros. The impedance matrix and graphical solutions describe proposed filter's operation principle. To demonstrate the proposed filter schema, two bandpass filters, with center frequencies of 2.44 and 4.8 GHz, were designed and implemented using low-temperature co-fired ceramic multilayer technology. The measured results were found to agree well with the simulation results. The 2.44-GHz fabricated bandpass filter was found to possess low in-band insertion loss and high out-band suppression, making it suitable in wireless local area networks, Bluetooth, and RF home links. 相似文献
12.
Cheng-Chung Chen 《Microwave and Wireless Components Letters, IEEE》2005,15(4):259-261
This letter proposes and fabricates a novel dual-band bandpass filter topology. The proposed topology facilitates the split resonating frequencies of coupled resonator pairs in realizing the dual-band response and introduces transmission zeros for improving the stopband attenuation. The semi-lumped prototype enables the integration of the filter in a multilayer circuit for miniaturized implementation. Finally, a design example fabricated with low temperature co-fired ceramic (LTCC) technology is presented for validating the filter configuration. 相似文献
13.
Realization of transmission zeros in combline filters using an auxiliary inductively coupled ground plane 总被引:5,自引:0,他引:5
Ching-Wen Tang Yin-Ching Lin Chi-Yang Chang 《Microwave Theory and Techniques》2003,51(10):2112-2118
The out-band transmission zeros of the multilayer low-temperature co-fired ceramic bandpass filter are studied. The design target of this filter, with passband between 2.3-2.65 GHz (the true application is 2.4-2.483 GHz), is to reject the local oscillator and image signals and, in the mean time, to suppress the harmonic frequency. This filter is a modified three-pole combline filter, which can easily achieve a high rejection rate and low insertion loss. The source-load coupling capacitor incorporation with cross-coupling grounding inductors can generate three transmission zeros. By properly adjusting the inductance values of the inductors between three resonators and ground the transmission zero can easily be manipulated at a high-side skirt to suppress the harmonic frequency. The measured results match well with the electromagnetic simulation that provides evidence for the feasibility of the proposed design. 相似文献
14.
15.
提出了一款基于四模谐振器的新型双通带带通滤波器.设计的四模谐振器基于微带线结构,由四个开路枝节和一个短路枝节组成.两次采用奇偶模分析法对该四模谐振器结构进行分析.该四模谐振器的每个模式能够实现独立调节,同时每两个模式形成一个通带.采用源与负载耦合的馈电方式,提高滤波器的带外抑制性.该滤波器具有四个传输零点和四个传输极点.测试结果表明,该双模双通带滤波器工作于2.08GHz和6.07GHz,3dB带宽分别为11.06%和7.74%.设计的滤波器具有紧凑的结构,只有0.28λg×0.11λg大小. 相似文献
16.
17.
Wing-Yan Leung Cheng K.-K.M. Ke-Li Wu 《Microwave and Wireless Components Letters, IEEE》2002,12(7):240-242
Lumped-element bandpass filter structures with enhanced stopband rejection targeted for low temperature co-fired ceramic (LTCC) implementation are proposed. Design equation formulations that take into account the effect of the transmission zeros are presented. For demonstration, RF filters operating at 2.4 GHz are fabricated and characterized. Both simulation and measurement results are shown for comparison 相似文献
18.
C波段LTCC带通滤波器的设计,由于其谐振器采取集中LC元件,其Q值偏低,且LTCC厚膜集中元件大小在C波段相对偏大,为此在设计方面主要考虑利用传输线结构的分布参数谐振单元。分布参数宽边耦合谐振单元耦合系数大,特别适合中宽带滤波器设计。文章根据滤波器指标要求,通过电路综合出滤波器的耦合系数及外部Q值。然后利用LTCC多层优势,实现宽边叠层耦合谐振单元的C波段滤波器。 相似文献