UK road transport energy—analysis at primary or secondary fuel basis?

This communication questions whether Banister and Banister, in a previous study, have adequately derived the UK primary energy consumption and energy efficiencies of road transport in comparison with rail. High quality transport fuels are costly to make in energy terms, so considerations of refinery efficiency must be incorporated into any transport modal comparisons. Overall it is argued that Banister and Banister have understated the primary energy consumption of road transport by not adequately treating refinery losses, and in so doing have been unduly pessimistic about the possibility of energy conservation in modal transfer to rail.     

Energy intensity in road freight transport of heavy goods vehicles in Spain

This paper examines the factors that have influenced the energy intensity trend of the Spanish road freight transport of heavy goods vehicles over the period 1996–2012. This article aims to contribute to a better understanding of these factors and to inform the design of measures to improve energy efficiency in road freight transport. The paper uses both annual single-period and chained multi-period multiplicative LMDI-II decomposition analysis. The results suggest that the decrease in the energy intensity of Spanish road freight in the period is explained by the change in the real energy intensity index (lower energy consumption per tonne-kilometre transported), which is partially offset by the behaviour of the structural index (greater share in freight transport of those commodities the transportation of which is more energy intensive). The change in energy intensity is analysed in more depth by quantifying the contribution of each commodity through the attribution of changes in Divisia indices.     

Fuel consumption for road transport in the USA

This study provides both a historical analysis of fuel demand for road transport and an example of using econometric results for projections. Fuel consumption by all motor vehicles in the USA has been analysed by splitting total demand into passenger car, truck and other demands. Distance travelled and fuel efficiency equations have been estimated for both the passenger car fleet and trucks. An essentially five equation model has been constructed and used to simulate likely fuel demand patterns up to 1990.     

Estimation of Turkish road transport emissions

Using the COPERT III program, an inventory of Turkish road transport emissions was calculated and the contributions of road transport to global and local air pollutant emissions were examined for the year 2004. It was observed that passenger cars are the main source of CO, HC, and Pb emissions while heavy duty vehicles are mainly responsible for NO_x, particulate matter (PM), and SO₂ emissions. Taking the emissions for the year 2004 as the baseline, a parametric study was conducted to determine the emission reduction potentials of different road transport strategies. The results indicated that the following road transport strategies; fleet renewal, promotion of public transportation, and faster urban traffic speed are very effective strategies for reducing regulated emissions and fuel consumption (FC) from a technical point of view. It was also noted that replacement of two-stroke motorcycles with four-stroke motorcycles is as effective as fleet renewal in reducing HC emissions.     

Fuel consumption for road transport in the USA - a comment

A recent article in this journal econometrically estimated the relationship between US car and truck fuel economy and the price of fuel, without considering the effect of legally mandated fuel economy standards for new vehicles. There is considerable evidence that the standards have played an important role in recent fuel economy improvements. An alternative approach to estimating the fuel price responsiveness of new vehicle fuel economy based on vehicle sales data and capital operating cost trade-off analysis of fuel efficient vehicle design and technology suggests short-and long-run elasticities in the vicinity of 0.25 and 0.5, respectively.     

Scenario analysis on alternative fuel/vehicle for China’s future road transport: Life-cycle energy demand and GHG emissions

The rapid growth of vehicles has resulted in continuing growth in China’s oil demand. This paper analyzes future trends of both direct and life cycle energy demand (ED) and greenhouse gas (GHG) emissions in China’s road transport sector, and assesses the effectiveness of possible reduction measures by using alternative vehicles/fuels. A model is developed to derive a historical trend and to project future trends. The government is assumed to do nothing additional in the future to influence the long-term trends in the business as usual (BAU) scenario. Four specific scenarios are used to describe the future cases where different alternative fuel/vehicles are applied. The best case scenario is set to represent the most optimized case. Direct ED and GHG emissions would reach 734 million tonnes of oil equivalent and 2384 million tonnes carbon dioxide equivalent by 2050 in the BAU case, respectively, more than 5.6 times of 2007 levels. Compared with the BAU case, the relative reductions achieved in the best case would be 15.8% and 27.6% for life cycle ED and GHG emissions, respectively. It is suggested for future policy implementation to support sustainable biofuel and high efficient electric-vehicles, and the deployment of coal-based fuels accompanied with low-carbon technology.     

The impact of fuel cell vehicle deployment on road transport greenhouse gas emissions: The China case

Considerable attention has been paid to energy security and climate problems caused by road vehicle fleets. Fuel cell vehicles provide a new solution for reducing energy consumption and greenhouse gas emissions, especially those from heavy-duty trucks. Although cost may become the key issue in fuel cell vehicle development, with technological improvements and cleaner pathways for hydrogen production, fuel cell vehicles will exhibit great potential of cost reduction. In accordance with the industrial plan in China, this study introduces five scenarios to evaluate the impact of fuel cell vehicles on the road vehicle fleet greenhouse gas emissions in China. Under the most optimistic scenario, greenhouse gas emissions generated by the whole fleet will decrease by 13.9% compared with the emissions in a scenario with no fuel cell vehicles, and heavy-duty truck greenhouse gas emissions will decrease by nearly one-fifth. Greenhouse gas emissions intensity of hydrogen production will play an essential role when fuel cell vehicles' fuel cycle greenhouse gas emissions are calculated; therefore, hydrogen production pathways will be critical in the future.     

Evaluation of the energy efficiency evolution in the European road freight transport sector

In this paper, we evaluate energy efficiency in the European freight transport sector over three decades, according to a variety of indicators, methodologies and databases. The aim is, on the one hand, of determining major drawbacks in energy efficiency metrics, on the other hand, identifying a possible trend in the sector. The present analysis shows that energy efficiency evaluation is generally subject to misinterpretation and distortion with regard to the methods and data source adopted. Two different indicators (energy intensity and fuel economy) were initially taken into account to select the most suitable for evaluating vehicles’ efficiency. Fuel economy was then adopted and measured according to two different methodologies (top–down and bottom–up). We then considered all the possible sources of distortion (data sources employed, methods of data detection, speed of detection, power enhancement, size factor) with the aim of accomplishing a sound estimation. Fuel economy was eventually divided with the maximum power available (adjusted fuel economy), to account for the power shift of vehicles, that represents a further efficiency improvement.     

Sustainable energy management in urban transport: The public's response of road congestion pricing in Thailand

Fuel consumption of vehicles is one of the most vigorously debated issues in Thailand. Concerns about the effect of emissions from the vehicles and a significant reliance on imported oil provide legitimate reasons for government action to manage fuel consumption. There are several different policy measures available to affect the fuel-efficient vehicles as well as reduce the amount of driving. This paper presents the major policy measure studies namely congestion pricing, etc. In congestion pricing measure, we conducted a survey of 400 samples in Bangkok area. The purpose of the survey was to inform respondents about a policy designed to reduce freeway congestion and to estimate respondent support for this policy. After receiving extensive information about the policy, respondents were polled on whether they would support, i.e., vote for any or all of these options. The results of the congestion fee survey suggest that 22% of commuting motorists in Bangkok will support congestion fees on the freeways of the region. Public acceptance is substantially enhanced by promising to return at least some of the revenues in the form of reductions in other taxes.     

Climate policies for road transport revisited (II): Closing the policy gap with cap-and-trade

Current policies in the road transport sector fail to deliver consistent and efficient incentives for greenhouse gas abatement (see companion article by Creutzig et al., in press). Market-based instruments such as cap-and-trade systems close this policy gap and complement traditional policies that are required where specific market failures arise. Even in presence of strong existing non-market policies, cap-and-trade delivers additional abatement and efficiency by incentivizing demand side abatement options. This paper analyzes generic design options and economic impacts of including the European road transport sector into the EU ETS. Suitable points of regulation are up- and midstream in the fuel chain to ensure effectiveness (cover all emissions and avoid double-counting), efficiency (incentivize all abatement options) and low transaction costs. Based on year 2020 marginal abatement cost curves from different models and current EU climate policy objectives we show that in contrast to conventional wisdom, road transport inclusion would not change the EU ETS allowance price. Hence, industrial carbon leakage induced by adding road transport to the EU ETS may be less important than previously estimated.     

Quantifying water transport in anion exchange membrane fuel cells

Sufficient water transport through the membrane is necessary for a well-performing anion exchange membrane fuel cell (AEMFC). In this study, the water flux through a membrane electrode assembly (MEA), using a Tokuyama A201 membrane, is quantified using humidity sensors at the in- and outlet on both sides of the MEA. Experiments performed in humidified inert gas at both sides of the MEA or with liquid water at one side shows that the aggregation state of water has a large impact on the transport properties. The water fluxes are shown to be approximately three times larger for a membrane in contact with liquid water compared to vaporous. Further, the flux during fuel cell operation is investigated and shows that the transport rate of water in the membrane is affected by an applied current. The water vapor content increases on both the anode and cathode side of the AEMFC for all investigated current densities. Through modeling, an apparent water drag coefficient is determined to −0.64, indicating that the current-induced transport of water occurs in the opposite direction to the transport of hydroxide ions. These results implicate that flooding, on one or both electrodes, is a larger concern than dry-out in an AEMFC.     

The effect of diffusioosmosis on water transport in polymer electrolyte fuel cells

An analytical study of the effect of diffusioosmosis caused by the concentration gradient of hydrogen ions on the isothermal transport of water in a fully hydrated membrane of a polymer electrolyte fuel cell (PEFC) is presented. A capillary tube or slit with a negatively charged wall is chosen to model the nanopores of the membrane. The electric double layer adjacent to the capillary wall may have an arbitrary thickness relative to the capillary radius and its electrostatic potential distribution is determined as the solution of the Poisson–Boltzmann equation. Solving a modified Navier–Stokes equation, the fluid velocity in the axial direction of the capillary induced by the macroscopic electric field and protonic concentration gradient is obtained as a function of the radial position in closed forms. The results for the local and averaged electrokinetic velocities in the capillary show that the effect of diffusioosmosis on the water transport in the membrane of a PEFC can be significant in comparison with that of electroosmosis under low-potential-difference operations.     

Mass transport analysis of a passive vapor-feed direct methanol fuel cell

A two-dimensional, two-phase, non-isothermal model using the multi-fluid approach was developed for a passive vapor-feed direct methanol fuel cell (DMFC). The vapor generation through a membrane vaporizer and the vapor transport through a hydrophobic vapor transport layer were both considered in the model. The evaporation/condensation of methanol and water in the diffusion layers and catalyst layers was formulated considering non-equilibrium condition between phases. With this model, the mass transport in the passive vapor-feed DMFC, as well as the effects of various operating parameters and cell configurations on the mass transport and cell performance, were numerically investigated. The results showed that the passive vapor-feed DMFC supplied with concentrated methanol solutions or neat methanol can yield a similar performance with the liquid-feed DMFC fed with much diluted methanol solutions, while also showing a higher system energy density. It was also shown that the mass transport and cell performance of the passive vapor-feed DMFC depend highly on both the open area ratio of the vaporizer and the methanol concentration in the tank.     

Mass transport phenomena in direct methanol fuel cells

Clean and highly efficient energy production has long been sought to solve energy and environmental problems. Fuel cells, which convert the chemical energies stored in fuel directly into electrical energy, are expected to be a key enabling technology for this century. This article is concerned with one of the most advanced fuel cells – direct methanol fuel cells (DMFCs). We present a comprehensive review of the state-of-the-art studies of mass transport of different species, including the reactants (methanol, oxygen and water) and the products (water and carbon dioxide) in DMFCs. Rather than elaborating on the details of the previous numerical modeling and simulation, the article emphasizes: i) the critical mass-transport issues that need to be addressed so that the performance and operating stability of DMFCs can be upgraded, ii) the basic mechanisms that control the mass-transport behaviors of reactants and products in this type of fuel cell, and iii) the previous experimental and numerical findings regarding the correlation between the mass transport of each species and cell performance.     

Comparative analysis of battery electric,hydrogen fuel cell and hybrid vehicles in a future sustainable road transport system

This paper compares battery electric vehicles (BEV) to hydrogen fuel cell electric vehicles (FCEV) and hydrogen fuel cell plug-in hybrid vehicles (FCHEV). Qualitative comparisons of technologies and infrastructural requirements, and quantitative comparisons of the lifecycle cost of the powertrain over 100,000 mile are undertaken, accounting for capital and fuel costs. A common vehicle platform is assumed. The 2030 scenario is discussed and compared to a conventional gasoline-fuelled internal combustion engine (ICE) powertrain. A comprehensive sensitivity analysis shows that in 2030 FCEVs could achieve lifecycle cost parity with conventional gasoline vehicles. However, both the BEV and FCHEV have significantly lower lifecycle costs. In the 2030 scenario, powertrain lifecycle costs of FCEVs range from $7360 to $22,580, whereas those for BEVs range from $6460 to $11,420 and FCHEVs, from $4310 to $12,540. All vehicle platforms exhibit significant cost sensitivity to powertrain capital cost. The BEV and FCHEV are relatively insensitive to electricity costs but the FCHEV and FCV are sensitive to hydrogen cost. The BEV and FCHEV are reasonably similar in lifecycle cost and one may offer an advantage over the other depending on driving patterns. A key conclusion is that the best path for future development of FCEVs is the FCHEV.     

Flexible sector coupling with hydrogen: A climate-friendly fuel supply for road transport

The substantial expansion of renewable energy sources is creating the foundation to successfully transform the German energy sector (the so-called ‘Energiewende’). A by-product of this development is the corresponding capacity demand for the transportation, distribution and storage of energy. Hydrogen produced by electrolysis offers a promising solution to these challenges, although the willingness to invest in hydrogen technologies requires the identification of competitive and climate-friendly pathways in the long run. Therefore, this paper employs a pathway analysis to investigate the use of renewable hydrogen in the German passenger car transportation sector in terms of varying market penetration scenarios for fuel cell-electric vehicles (FCEVs). The investigation focuses on how an H₂ infrastructure can be designed on a national scale with various supply chain networks to establish robust pathways and important technologies, which has not yet been done. Therefore, the study includes all related aspects, from hydrogen production to fueling stations, for a given FCEV market penetration scenario, as well as the CO₂ reduction potential that can be achieved for the transport sector. A total of four scenarios are considered, estimating an FCEV market share of 1–75% by the year 2050. This corresponds to an annual production of 0.02–2.88 million tons of hydrogen. The findings show that the most cost-efficient H₂ supply (well-to-tank: 6.7–7.5 €/kg_H2) can be achieved in high demand scenarios (FCEV market shares of 30% and 75%) through a combination of cavern storage and pipeline transport. For low-demand scenarios, however, technology pathways involving LH₂ and LOHC truck transport represent the most cost-efficient options (well-to-tank: 8.2–11.4 €/kg_H2).     

Characteristics of water transport through the membrane in direct methanol fuel cells operating with neat methanol

The water required for the methanol oxidation reaction in a direct methanol fuel cell (DMFC) operating with neat methanol can be supplied by diffusion from the cathode to the anode through the membrane. In this work, we present a method that allows the water transport rate through the membrane to be in-situ determined. With this method, the effects of the design parameters of the membrane electrode assembly (MEA) and operating conditions on the water transport through the membrane are investigated. The experimental data show that the water flux by diffusion from the cathode to the anode is higher than the opposite flow flux of water due to electro-osmotic drag (EOD) at a given current density, resulting in a net water transport from the cathode to the anode. The results also show that thinning the anode gas diffusion layer (GDL) and the membrane as well as thickening the cathode GDL can enhance the water transport flux from the cathode to the anode. However, a too thin anode GDL or a too thick cathode GDL will lower the cell performance due to the increases in the water concentration loss at the anode catalyst layer (CL) and the oxygen concentration loss at the cathode CL, respectively.     

Air versus terrestrial transport modalities: An energy and environmental comparison

In the last 15 years, worldwide air transportation has grown at an average yearly rate of 4.5%. Forecasts confirm that this could be the average increase rate for the next 20 years, although recent oscillation of oil price translated into a slowing down of such a trend, with several air companies forced out of business. Within this framework, low cost airlines keep increasing their market share, in so making airplane to compete with terrestrial transport modalities, not only for medium and long distance, but also for short trips. This is because air transport is obviously faster than transport by trains and cars, and most often it also is a cheaper option in money terms.In spite of its apparent success, air transportation is a source of concern for many analysts, because it is considered as the more energy intensive and polluting transport modality. In order to explore the correctness of such an issue, we compared air transportation to high speed trains and other modern terrestrial modalities, by using a “whole-system” approach. The present study applies an LCA-like approach, by taking into account all the energy and materials directly and indirectly required to make and operate infrastructures (i.e. tunnels, railways, highways) and vehicles. Efficiency and environmental loading are assessed by means of Material Flow Accounting, Embodied Energy Analysis and Emergy Synthesis methods. Results point out that the gap among the environmental performances of air, road and railway modalities is significantly narrower than expected. The thermodynamic and environmental costs of road and railway infrastructure cannot be disregarded as negligible. In a selected number of cases these transport modalities perform even worse than the air transportation mode, where infrastructures play a much smaller role.     

Evaluation of usage and fuel savings of solar ovens in Nicaragua

Solar cooking technology has been promoted as a solution to both global poverty and environmental degradation, but relatively little research exists on the impact of solar oven usage on biomass fuel consumption. This study evaluates solar oven usage and wood consumption in northern Nicaragua during both the rainy and dry seasons, using surveys, temperature dataloggers, and direct measurements of fuelwood use. Solar oven owners reported usage on 79% of days during the dry season, and 41% of days during the rainy season. Comparison with oven temperature records confirmed usage on 50% of days during the dry season, and 16% of days during the rainy season. However, wood consumption measurements showed no statistically significant difference between days with solar oven usage and days without, suggesting that frequency of usage alone is not an appropriate proxy for fuel savings. Survey results suggest that a large part of solar oven usage came in addition to biomass cooking, as opposed to replacing it. These results suggest a need for further study of wood consumption in situ and more focus on the specific kinds of foods prepared in solar cookers, as well as local cultural and climatic conditions.