Graft copolymerization of methacrylic acid onto xanthan gum by Fe2+/H2O2 redox initiator

The graft copolymer of xanthan gum with methacrylic acid was synthesized in inert atmosphere by using Fentos reagent as a redox initiator. The effect of reaction conditions on grafting parameters [G(%), E(%), C(%), A(%), H(%), and R_g] was investigated. Similar trend was observed on increasing the concentration of ferrous ion and hydrogen peroxide from 4.0 to 20.0 × 10^?3 mol dm^?3 and 2.5 to 10 × 10^?3 mol dm^?3 respectively, i.e., initially grafting parameters increased and after a certain range of concentration grafting parameters showed decreasing trend. Hydrogen ion shows influenced result i.e., small increment of concentration in hydrogen ion presents much increment in percent of grafting. It was observed that the [G(%), E(%), C(%), A(%), and R_g] increased upto 6.67 × 10^?2 mol dm^?3 concentration of methacylic acid after that it decreased. Maximum G(%) was obtained at minimum concentration of xanthan gum i.e., at 40 × 10^?2 g dm^?3. The optimum temperature and time duration of reaction for maximum percentage of grafting were found to be 45°C and 150 min respectively. Thermogravimetric analysis showed that the xanthan gum‐g‐methacrylic acid is thermally more stable than pure gum. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Graft copolymerization of acrylic acid onto guar gum

The graft copolymerization of acrylic acid (AA) onto guar gum (GOH) was carried out by a peroxydiphosphate (PDP)–silver(I) system. Grafting ratio, efficiency, add‐on, and conversion increase upon increasing the concentration of PDP and acrylic acid, whereas they decrease upon increasing the concentration of guar gum. Upon increasing the concentration of silver and hydrogen ions up to 2.0 × 10⁻³ and 4.87 × 10⁻² mol dm⁻³, respectively, the grafting ratio and efficiency increase but decrease upon further increasing the concentration. The increase in temperature from 30 to 45°C increases the grafting ratio but the conversion efficiency decreases. The optimum time period for graft copolymerization was found to be 2 h. The graft copolymers were characterized by infrared spectroscopy and thermogravimetric analysis. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 39–44, 2000     

Graft copolymerization of styrene and acrylonitrile onto EPDM

Acrylonitrile–EPDM–styrene (AES) graft copolymers were synthesized by solution graft polymerization of styrene (St) and acrylonitrile (AN) onto EPDM in an n‐hexane/benzene solvent with benzoyl peroxide (BPO) as an initiator. The structure changes were studied by an FTIR spectrophotometer. The grafting parameters were calculated gravimetrically. The influence of the polymerization conditions, such as the reaction time, concentration of the initiator, EPDM content, and weight ratio of St/AN, on the structure of the products was investigated. It was found that a proper initiator concentration and EPDM content will give a high grafting ratio of the AES resin. The thermal property of the copolymer was studied using programmed thermogravimetric analysis (TGA). The results showed that the copolymer has a better heat‐resistant property than that of ABS, especially for the initial decomposition temperature (T_in) and the maximum weight loss rate temperature (T_max). Also, the mechanism of the graft reaction was discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 428–432, 2002     

Cu+2/mandelic acid redox pair initiated graft copolymerization acrylamide onto guar gum

The effect of reaction conditions on the grafting parameters during the grafting of acrylamide (ACM) onto guar gum (GOH) by using a Cu⁺²–mandelic acid (MA) redox couple was studied. On increasing the Cu⁺² ion concentration (0.5 × 10⁻² to 1.0 × 10⁻² mol dm⁻³), an increase in total conversion of monomer, grafting ratio, efficiency, and add on was observed. Grafting ratios increased with an increase in concentration of mandelic acid and reaches its maximum value at 0.8 × 10⁻² mol dm⁻³. It was observed that grafting onto guar gum takes place efficiently when monomer and hydrogen ion concentrations are 20.0 × 10⁻² and 2.2 × 10⁻² mol dm⁻³, respectively. Optimum temperature and time for obtaining a maximum grafting ratio and efficiency was found to be 35 ± 0.2°C and 2 h, respectively. The plausible mechanism of grafting was suggested. The graft copolymer was characterized by infrared spectroscopy and thermogravimetric analysis. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 739–745, 1999     

Graft copolymerization of acrylic acid onto methylcellulose by potassium permanganate‐p‐xylene redox pair

Poly(acrylic acid) was grafted onto methylcellulose in aqueous media by a potassium permanganate‐p‐xylene redox pair. Within the concentration range from 0.93 × 10^?3 to 9.33 × 10^?3M, p‐xylene, the graft copolymerization reaction exhibited minimum and maximum graft yields and was associated with two precursor‐initiating species, a p‐xylyl radical and its diradical derivative. The efficiency of the graft was low, not higher than 12.9% at a p‐xylene concentration of 0.93 × 10^?3M and suggested the dominance of a competitive homopolymerization reaction under homogeneous conditions. The effect of permanganate on the graft yield was normal and optimal at 135% graft yield, corresponding to a concentration of the latter of 33.3 × 10^?3M over the range from 8.3 × 10^?3 to 66.7 × 10^?3M. The conversion in graft yield showed a negative dependence on temperature in the range 30–60°C and suggested a preponderance of high activation energy transfer reaction processes. The calculated composite activation energy for the graft copolymerization was 7.6 kcal/mol. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 278–281, 2004     

Graft copolymerization of methacrylic acid onto guar gum,using potassium persulfate as an initiator

Graft copolymerization of methacrylic acid (MAA) onto guar gum (GG) was carried out by free radical initiation mechanism by using potassium persulfate (PPS) as an initiator. It was found that % grafting, grafting efficiency, and % conversion were all dependent on the concentration of PPS, MAA, reaction temperature, and reaction time. Using PPS, the maximum % grafting was ascertained to be 241 at the optimum conditions of 60°C reaction temperature, 3 h of reaction time, 1.1 mmol of PPS, and 0.058 mol of MAA. Plausible mechanism for grafting reaction was suggested. The graft copolymer formed was characterized by Fourier transform infrared and differential scanning calorimetry. The graft copolymer formed could find applications in drug delivery. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 618–623, 2006     

Graft copolymerization of acrylonitrile onto Cassia tora gum with ceric ammonium nitrate–nitric acid as a redox initiator

The graft copolymerization of acrylonitrile (AN) onto Cassia tora gum (CTG) was carried out in an aqueous medium with a ceric ammonium nitrate (CAN)–nitric acid initiation system. The percentage grafting and percentage grafting efficiency were determined as functions of the concentrations of CAN, nitric acid, AN, and CTG and the polymerization temperature and time. The results are discussed, and a reaction mechanism is proposed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 129–136, 2003     

Vanadium(V)/mandelic acid initiated graft copolymerization of acrylamide onto guar gum in an aqueous medium

The graft copolymerization reaction of acrylamide onto guar gum with a vanadium(V)/mandelic acid redox pair was carried out in an N₂ atmosphere. The optimum concentrations of vanadium(V), mandelic acid, hydrogen ions, acrylamide, and guar gum for the maximum percentage of grafting were 6.0 × 10^?3, 2.0 × 10^?2, 55.0 × 10^?2, and 20.0 × 10^?2 mol/dm³ and 110.1 × 10^?2 g/dm³, respectively. The optimum time and temperature of reaction were 90 min and 35°C, respectively, and during the study of [H⁺] variation, a prompt change in the value of the grafting parameters was observed. The maximum percentage of swelling of the graft copolymer was achieved at room temperature in 1 h. Studies of the flocculation, viscosity, and metal‐ion absorption capacity were also performed. The synthesized graft copolymer was characterized by Fourier transform infrared spectroscopy and thermogravimetric analyses, which showed that the grafted guar gum was thermally more stable than the ungrafted guar gum. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Modification of carbohydrate polymers via grafting of methacrylonitrile onto pregelled starch using potassium monopersulfate/Fe2+ redox pair

The graft copolymerization of reactive pregelled starch (PGS) with methacrylonitrile (MAN) was performed and the reaction conditions were optimized using potassium monopersulfate (PMPS) in the presence of ferrous ion redox pair as initiator. Emphasis was directed towards increasing the graft formation and decreasing homopolymerization. The grafting parameters were studied with respect to graft yield and graft reaction efficiency percent. In addition, the newly prepared polymethacrylonitrile (polyMAN)‐pregelled starch graft copolymers were applied to cotton textiles to see their suitability as a new sizing agent. Based on the results obtained, appropriate conditions for grafting MAN onto pregelled starch was established and the graft yield was higher under the following conditions: using 0.004 mol l^?1 potassium monopersulfate as initiator, 0.005 mol l^?1 ferrous ion concentration, 0.003 mol l^?1, sulfuric acid, 50 % MAN concentration (based on weight of substrate), material to liquor ratio 1:2.5, reaction time 60 min, and polymerization temperature 40 °C. Finally, fabric samples sized with polyMAN‐pregelled starch graft copolymers acquired higher tensile strength and abrasion resistance than that sized with original pregelled starch, while elongation at break was unaltered. Copyright © 2004 Society of Chemical Industry     

Graft copolymerization of methyl methacrylate onto rubber‐wood fiber using H2O2 and Fe2+ as an initiator system

Methyl methacrylate (MMA) was successfully grafted onto rubber‐wood fiber in a free‐radical solution polymerization initiated by ferrous ion and hydrogen peroxide. The effects of the reaction parameters (reaction temperature, reaction period, influence of hydrogen peroxide, ferrous ammonium sulfate, and monomer concentrations) were investigated. The grafting percentage showed dependency on H₂O₂, Fe²⁺, and monomer concentrations, as well as reaction temperature and reaction period. The optimum reaction temperature was determined to be about 60°C and the reaction period was 60 min. The optimum concentration of H₂O₂ was 0.03M and optimum amounts of Fe²⁺ and MMA were 0.26 mmol and 2.36 × 10^?2 mol, respectively. Poly(methyl methacrylate) (PMMA) homopolymer was removed from the graft copolymer by Soxhlet extractor using acetone. The presence of PMMA on the fiber was shown by FT‐IR spectroscopy and gravimetric analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2499–2503, 2003     

Graft copolymerization of methyl methacrylate onto oil palm empty fruit bunch fiber using H2O2/Fe2+ as an initiator

Graft copolymerization of methyl methacrylate (MMA) onto oil palm empty fruit bunch fiber (OPEFB) was successfully carried out in aqueous medium using hydrogen peroxide as an initiator. Results from the investigation of the optimum conditions for grafting are presented. Maximum percentage of grafting was achieved when the amount of initiator, cocatalyst, and nitric acid were 5.877 × 10^?3 mol, 2.63 × 10^?4 mol, and 3.24 × 10^?3 mol, respectively. The optimum reaction temperature was 50°C and the reaction period was 120 min. The highest percentage of grafting and grafting efficiency were 220 and 47%, respectively, under optimum conditions. The grafted copolymer was characterized by FTIR spectroscopy and scanning electron microscopy. The presence of a band at 1730 cm^?1 provides strong evidence of grafting. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2233–2238, 2003     

Studies of graft copolymerization of acrylamide onto guar gum using peroxydiphosphate–metabisulphite redox pair

The effect of reaction conditions on the grafting parameter during grafting of acrylamide onto guar gum has been studied using peroxydiphosphate–metabisulphite redox pair at 35 °C. Grafting ratio, efficiency and add‐on all increase as the concentrations of peroxydiphosphate and acrylamide increase up to 40.0 × 10⁻³ mol dm⁻³ and 40.0 × 10⁻² mol dm⁻³, respectively. It has been observed that the optimum concentrations of metabisulphite and guar gum for obtaining high grafting ratio, efficiency, add‐on and conversion are 6.0 × 10⁻³mol dm⁻³ and 91.7 × 10⁻² g dm⁻³, respectively. © 2000 Society of Chemical Industry     

Modification of guar gum through grafting of 4‐vinyl pyridine using potassium peroxymonosulphate/ascorbic acid redox pair

In the present article, the graft copolymerization of 4‐vinyl pyridine onto guar gum initiated by potassium peroxymonosulphate/ascorbic acid redox pair in an aqueous medium was studied gravimetrically under a nitrogen atmosphere. Grafting ratio, grafting efficiency, and add on increased on increasing the concentration of potassium peroxymonosulphate from 5.0 × 10^?4 to 10 × 10^?4 mol/L and ascorbic acid concentration from 0.4 × 10^?3 to 2.0 × 10^?3 mol/L. On increasing the hydrogen ion concentration from 2.5 × 10^?3 to 10.0 × 10^?3 mol/L, grafting ratio, efficiency, add on and conversion were increased. Maximum grafting was obtained when guar gum and monomer concentration were 1.0 g/L and 20.0 × 10^?2 mol/L, respectively. An increase in temperature from 30 to 35°C increased the grafting ratio, but conversion and homopolymer decreased. The graft copolymers were characterized by IR spectroscopy and thermogravimetric analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Free-radical emulsion copolymerization of styrene with butadiene and vinyl triethoxysilane with a cumene hydroperoxide redox initiator

The emulsion free-radical copolymerization of vinyl triethoxysilane (VTES) with styrene (St) and butadiene (Bd) was initiated by cumene hydroperoxide and ferrous sulfate at 0 °C. The effects of VTES on the copolymerization conversion, reaction time, gel content, latex particle size, thermal stability, and mechanical properties were thoroughly investigated. The success of this reaction was confirmed by the peaks attributed to both Si─O─Si groups at 1065 cm⁻¹ and the Si─O─C bond at 1046 cm⁻¹. A kinetics analysis showed that the conversion decreased with increasing VTES mass in the monomer feed. Compared with that in the St–Bd copolymer, the latex particle size increased slightly with increasing VTES mass. The Mooney viscosity and gel content results show that a large fraction of precrosslinking molecular chains was formed in the rubber particles. The thermogravimetric analysis results indicate that the thermal stability of the copolymers increased with increasing VTES concentration. The 300% modulus and tensile strength of the St–Bd–VTES copolymer increased with the mass of VTES at first and then decreased after 3 phr VTES, whereas the elongation at break decreased with increasing VTES mass. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47896.     

Graft copolymerization of acrylic acid on methylcellulose by ceric ion/p‐xylene redox pair

The graft copolymerization of acrylic acid onto methylcellulose by ceric ion/p‐xylene redox pair was investigated in aqueous media under homogeneous conditions. The graft yield dependency on p‐xylene concentration in the range 1.8–45.0 × 10^?5M showed a minimum and an enhanced yield when the methylcellulose interacted with ceric ion and p‐xylene for an initial period of 10 min (preoxidation time) prior to addition of monomer to the reaction medium. This was attributed to the presence of two kinetically controlled reactions initiated by p‐xylyl radical and diradical species. At prolonged preoxidation times of 30 and 60 min, the graft yield dependency on p‐xylene concentration was normal and suggested the presence of only one initiating species. The effect of ceric ion on the graft reaction in the concentration range of 8.33–83.3 × 10^?3M was optimal at 131% graft yield for ceric ion concentration of 16.7 × 10^?3M and was reduced significantly by as much as 75% at the highest concentration of the latter. The temperature dependency of graft yield was negative in the region 30–50°C. At 50°C the initial rate of graft was only 37% of the value at 30°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 500–504, 2002; DOI 10.1002/app.10200     

Synthesis and characterization of biodegradable polyethylene by graft copolymerization of starch using glucose–Ce(IV) redox system

Graft copolymerization of low‐density polyethylene (LDPE) onto starch was carried out with glucose–cerium(IV) redox initiator in an aqueous sulfuric acid medium under nitrogen atmosphere. The graft yield was influenced by various parameters like reaction time, temperature, and concentrations of acid, glucose, polyethylene (PE), starch, and initiator. A maximum graft yield of 85.66% was obtained at a temperature of 50°C and at higher concentration of starch. Effect of grafting on crystallinity, morphology, and thermal properties of modified PE has been evaluated using X‐ray diffraction, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA/DTA). Biodegradability of starch‐grafted PE has been tested applying soil‐burial test. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3229–3239, 2006     

Synthesis and characterization of xanthan gum‐g‐N‐vinyl formamide with a potassium monopersulfate/Ag(I) system

A xanthan gum‐g‐N‐vinyl formamide graft copolymer was synthesized through the graft copolymerization of N‐vinyl formamide (NVF) onto xanthan gum with an efficient system, that is, potassium monopersulfate (PMS)/Ag(I) in an aqueous medium. The effects of the concentrations of Ag(I), PMS (KHSO₅), hydrogen ion, xanthan gum, and NVF along with the time and temperature on the graft copolymerization were studied by the determination of the grafting parameters (grafting ratio, add‐on, conversion, grafting efficiency, and homopolymer) and the rate of grafting. The maximum grafting ratio was obtained at a 0.6 g/dm³ concentration of xanthan gum. All the parameters showed an increasing trend with an increasing concentration of peroxymonosulfate, except the homopolymer percentage, which showed a decreasing trend. The grafting ratio, add‐on conversion, grafting efficiency, and rate of grafting increased with the concentration of Ag(I) increasing from 0.8 × 10^?2 to 1.2 × 10^?2 mol/dm³. The optimum time and temperature for the maximum degree of grafting were 90 min and 35°C, respectively. The graft copolymer was characterized with IR spectral analysis, thermogravimetric analysis, and differential calorimetry analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1637–1645, 2006     

Effect of ammonium polyphosphate and acrylic acid on NaCl treated electrospun PLA microfiber mat

In this study, insulation material was developed using polylactic acid (PLA), which is one of the most widely-used biodegradable polymers. The PLA was fabricated into a fiber mat shape using the electrospinning method, and NaCl salt was added to achieve thinner fiber diameter. This fiber-based mat showed lower thermal conductivity than PLA blocks but had poor tensile strength and heat stability. To improve these mechanical and thermal properties, ammonium polyphosphate (APP) and acrylic acid (AA) were added; AA was used to better bond the APP with the polymer matrix. The APP/AA mixed PLA fiber mat showed improved performance overall; with the addition of these materials, the thermal conductivity was about 35 mW/mK, which was slightly lower than before, the tensile stress improved about two times. Thermal stability was also augmented as the increase in the weight percentage of the sample residue after the thermogravimetric analysis indicated.     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatoargentate(III)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) using potassium diperiodatoargentate(III) [Ag(III)]–PVA redox system as initiator was studied in an alkaline medium. Some structural features and properties of the graft copolymer were confirmed by Fourier‐transfer infrared spectroscopy, scanning electron microscope, X‐ray diffraction and thermogravimetric analysis. The grafting parameters were determined as a function of concentrations of monomer, initiator, macromolecular backbone (X?_n = 1750, M? = 80 000 g mol^?1), reaction temperature and reaction time. A mechanism based on two single‐electron transfer steps is proposed to explain the formation of radicals and the initiation profile. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate and n‐butyl acrylate, were also used to produce graft copolymerizations. It has been confirmed that grafting occurred to some degree. Thermogravimetric analysis was performed in a study of the moisture resistance of the graft copolymer. Copyright © 2004 Society of Chemical Industry     

Graft polymerization of methyl methacrylate onto guar gum with ceric ammonium sulfate/dextrose redox pair

The effect of different reaction conditions on the grafting of methyl methacrylate (MMA) onto guar gum (GG) has been studied in detail. The grafting efficiency was optimal under the following conditions: MMA at 1.13 mol/L; ceric ammonium sulfate at 6.32 × 10^?3 mol/L; dextrose monohydrate at 2.428 × 10^?3 mol/L; GG at 4 g/L; temperature at 50°C; and time at 210 min. Fourier transform infrared spectroscopy was used for the confirmation of copolymer formation. Thermogravimetric analysis of GG and a representative graft copolymer were studied. A probable mechanism of grafting has been suggested. The biodegradability of the resulted copolymer was evaluated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3520–3525, 2001