Impact modified polyamide‐6/organoclay nanocomposites: Processing and characterization

The effects of melt state compounding of ethylene‐butyl acrylate‐maleic anhydride (E‐BA‐MAH) terpolymer and/or three types of organoclays (Cloisite® 15A, 25A, and 30B) on thermal and mechanical properties and morphology of polyamide‐6 are investigated. E‐BA‐MAH formed spherical domains in the materials to which it is added, and increased the impact strength, whereas the organoclays decreased the impact strength. In general, the organoclays increased the tensile strength (except for Cloisite 15A), Young's modulus and elongation at break, but the addition of E‐BA‐MAH had the opposite effect. XRD patterns showed that the interlayer spacing for the organoclays Cloisite 25A and Cloisite 30B increased in both polyamide‐6/organoclay binary nanocomposites and in polyamide‐6/organoclay/impact modifier ternary systems. TEM analysis showed that exfoliated‐intercalated nanocomposites were formed. The crystallinities of polyamide‐6/organoclay nanocomposites were in general lower than that of polyamide‐6 (except for Cloisite 15A). In ternary nanocomposites, crystallinities generally were lower than those of polyamide‐6/organoclay nanocomposites. Cloisite 15A containing ternary nanocomposites had higher tensile and impact strengths and Young's modulus than the ternary nanocomposites prepared with Cloisite 25A and Cloisite 30B, owing to its surface hydrophobicity and compatibility with the impact modifier. POLYM. COMPOS., 2008. © 2007 Society of Plastics Engineers     

Effect of water‐assisted extrusion and solid‐state polymerization on the microstructure of PET/Clay nanocomposites

An melt‐mixing process has been used to prepare Poly(ethylene terephthalate) (PET)/clay nanocomposites with high degree of clay delamination. In this method, steam was fed into a twin‐screw extruder (TSE) to reduce the PET molecular weight and to facilitate their diffusion into the gallery spacing of organoclays. Subsequently, the molecular weight (M_W) reduction of the PET matrix due to hydrolysis by water was compensated by solid‐state polymerization (SSP). The effect of the thermodynamic compatibility of PET and organoclays on the exfoliated microstructure of the nanocomposites was also examined by using three different nanoclays. The dispersion of Cloisite 30B (C30B) in PET was found to be better than that of Nanomer I.28E (I28E) and Cloisite Na⁺. The effect of feeding rate and consequently residence time on the properties of PET nanocomposites was also investigated. The results reveal more delamination of organoclay platelets in PET‐C30B nanocomposites processed at low feeding rate compared to those processed at high feeding rate. Enhanced mechanical and barrier properties were observed in PET nanocomposites after SSP compared to the nanocomposites prepared by conventional melt‐mixing. POLYM. ENG. SCI., 54:1723–1736, 2014. © 2013 Society of Plastics Engineers     

Microstructure and properties of poly(ethylene terephthalate)/organoclay nanocomposites prepared by water‐assisted extrusion: Effect of organoclay concentration

Poly(ethylene terephthalate) (PET)/Cloisite 30B (C30B) nanocomposites containing different concentrations of the organoclay were prepared using two different twin‐screw extrusion processes: conventional melt mixing and water‐assisted melt mixing. The reduction of the molecular weight of the PET matrix, caused by hydrolysis during the water‐assisted extrusion, was compensated by subsequent solid‐state polymerization (SSP). X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy analyses showed intercalated/exfoliated morphology in all PET/C30B nanocomposites, with a higher degree of intercalation and delamination for the water‐assisted process. Rheological, thermal, mechanical, and gas barrier properties of the PET nanocomposites were also studied. Enhanced mechanical and barrier properties were obtained in PET‐C30B nanocomposites compared to the neat PET. The nanocomposites exhibited higher tensile modulus and lower oxygen permeability after SSP. The elongation at break was significantly higher for SSP nanocomposites than for nanocomposites processed by conventional melt mixing. POLYM. ENG. SCI., 54:1879–1892, 2014. © 2013 Society of Plastics Engineers     

Microcellular poly(hydroxybutyrate‐co‐hydroxyvalerate)‐hyperbranched polymer–nanoclay nanocomposites

The effects of incorporating hyperbranched polymers (HBPs) and different nanoclays [Cloisite® 30B and halloysite nanotubes (HNT)] on the mechanical, morphological, and thermal properties of solid and microcellular poly(hydroxybutyrate‐co‐hydroxyvalerate) (PHBV) were investigated. According to the X‐ray diffraction (XRD) and transmission electron microscopy (TEM) analyses, Cloisite 30B exhibited a combination of exfoliation and heterogeneous intercalation structure for both solid and microcellular PHBV–12% HBP–2% Cloisite 30B nanocomposites. TEM images indicated that HNTs were uniformly dispersed throughout the PHBV matrix. The addition of 2% nanoclays improved the thermal stability of the resulting nanocomposites. The addition of HBP+poly(maleic anhydride‐alt‐1‐octadecene) (PA), Cloisite 30B, and HNT reduced the average cell size and increased the cell density of the microcellular components. The addition of (HBP+PA), Cloisite 30B, and HNT also increased the degree of crystallinity for both solid and microcellular components in comparison with neat PHBV. Also, with the addition of 12% (HBP+PA), the area under the tan‐δ curve, specific toughness, and strain‐at‐break of the PHBV–HBP nanocomposite increased significantly for both solid and microcellular specimens, whereas the storage modulus, specific Young's modulus, and specific tensile strength decreased. The addition of 2% nanoclays into the PHBV–HBP nanocomposites improved the storage modulus, specific Young's modulus, and specific tensile strength of the PHBV–HBP–nanoclay‐based nanocomposites, but they were still lower than those of the neat PHBV. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Preparation of thermoplastic elastomer nanocomposites based on polyamide‐6/polyepichlorohydrin‐co‐ethylene oxide

This work is aimed at determining the effect of nanoclay and polyepichlorohydrin‐co‐ethylene oxide (ECO) content on the microstructure and mechanical properties of PA6/ECO thermoplastic elastomers (TPEs). TPE nanocomposites were prepared in a laboratory mixer using polyamide 6 (PA6), ECO, and an organoclay by a two‐step melt mixing process. First, the PA6 was melt blended with Cloisite 30B and then mixed by ECO rubber. X‐ray diffraction results and transmission electron microscopy image showed that the nanoclay platelets were nearly exfoliated in both the phases. The SEM photomicrograph of PA6 with ECO showed that the elastomer particles are dispersed throughout the polyamide matrix and the size of rubber particles is less than 3 μm. Introduction of organoclay in the PA6 matrix increased the size of dispersed rubber particles in comparison with the unfilled but otherwise similar blends. The nanoscale dimension of the dispersed clay results in an improvement of the tensile modulus of the nanocomposites. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Preparation and interaction characteristics of exfoliated ABS/organoclay nanocomposite

A series of poly(acrylonitrile‐co‐butadiene‐co‐styrene) (ABS)/organoclays (Cloisite10A, Cloisite25A, and Cloisite30B) nanocomposites are prepared via two different methods: one is a solution blending and the other is a two‐step process where the solution blended mixture is subsequently compounded in the melt state using a torque rheometer (SOAM method). The effect of surfactants on the surface of three different organoclays that are modified with alkylammonium salts in polymer/organoclay nanocomposites is investigated by focusing on two major aspects; Flory‐Huggins interaction parameters and physical (thermal and mechanical) properties. The d‐spacing of both neat organoclays and intercalated/exfoliated organoclays is examined by X‐ray diffraction analysis, and the microstructure of these nanocomposites is examined by FE‐TEM. Solubility parameters of both polymer and organoclays of interest are calculated according to the group contribution method. Viscoelastic behavior of the nanocomposites is also investigated by measuring rheological properties under an oscillatory shear. The increase in the onset temperature of the thermal degradation indicates the enhancement of thermal stability of ABS due to intercalation or partial exfoliation. Mechanical properties, such as, tensile strength, tensile modulus, and elongation at break of the nanocomposites are measured. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Effect of dispersion state of organoclay on cellular foam structure and mechanical properties of ethylene vinyl acetate copolymer/ethylene‐1‐butenecopolymer/organoclay nanocomposite foams

In this study, our goal is to obtain lower density of ethylene‐vinyl acetate copolymer (EVA)/ethylene‐1‐butene copolymer (EtBC) foams without sacrificing mechanical properties. For this purpose EVA/EtBC/organoclay (Cloisite 15A, Closite 30B) nanocomposite foams were prepared. To investigate the effect of compatibilizer on the dispersion state of organoclay in cellular foam structure and mechanical properties of the EVA/EtBC/organoclay foams composites were prepared with and without maleic anhydride grafted EtBC (EtBC‐g‐MAH). The dispersion of organoclay in EVA/EtBC/organocaly foams was investigated by X‐ray diffraction and transmission electron microscopy. The EVA/EtBC nanocomposite foamswith the compatibilzer, especially EVA/EtBC/Cloisite 15A/EtBC‐g‐MAH foams displayed more uniform dispersion of organoclay than EVA/EtBC nanocomposite foams without the compatibilzer. As a result, EVA/EtBC/Cloisite 15A/EtBC‐g‐MAH foams have the smallest average cell size and highest 100% tensile modulus followed by EVA/EtBC/Cloisite 30B/EtBC‐g‐MAH foams. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3879–3885, 2007     

Effects of epoxy treatment of organoclay on structure, thermo-mechanical and transport properties of poly(ethylene terephthalate-co-ethylene naphthalate)/organoclay nanocomposites

Poly(ethylene terephthalate-co-ethylene naphthalate) (PETN) nanocomposites containing two different organoclays, Cloisite 20A and 30B, were prepared by melt intercalation using an extruder. The organoclays was treated with epoxy monomer to further improve the polar interactions with PETN matrix. The morphological, thermal-mechanical, mechanical and gas barrier characteristics of the nanocomposites were evaluated using several characterization tools. It is found that the Cloisite 30B had better interactions with PETN and was more uniformly dispersed within PETN than Cloisite 20A. Epoxy treatment of Cloisite 30B organoclay resulted in improvements in d-spacing between silicate layers, thermo-mechanical and tensile properties, as well as thermal stability, processing and gas barrier characteristics of the PETN/30B nanocomposites. These results suggest that the epoxy acted as the compatibilizer as well as the chain extender, improving the chemical interactions between PETN and organoclay, while discouraging the macromolecular mobility of polymer chains in the vicinity clay particles. The implications and the mechanisms behind these observations are discussed.     

Novel nanocomposite based on reactive organoclay and photosensitive aliphatic–aromatic polyamide: Synthesis and characterization

Novel polyamide/organoclay nanocomposites were prepared through solution intercalation technique. Reactive organoclay was prepared using Cloisite‐Na⁺ and protonated form of 4,4′‐diaminodiphenylmethane via ion‐exchange reaction. New photosensitive aliphatic‐aromatic polyamide containing dibenzal acetone moiety was successfully synthesized through direct polycondensation. Flammability and thermal properties of the polyamide and corresponding nanocomposites were studied. Thermogravimetric analysis results indicated improved thermal stability of the nanocomposites compared to the neat polyamide. According to the microscale combustion calorimeter results, the peak heat release rate value has been decreased from 113 to 72 W/g by introducing 2 wt% of the organoclay in the polyamide matrix. POLYM. COMPOS., 36:1502–1509, 2015. © 2014 Society of Plastics Engineers     

Effect of modified layered silicates on the confined crystalline morphology and thermomechanical properties of poly(ethylene oxide) nanocomposites

In this work, poly(ethylene oxide) (PEO)/organoclay nanocomposites with three different types of nanoclays (Cloisite 30B, Somasif JAD400, and Somasif JAD230) were prepared by melt mixing with a laboratory kneader followed by compression molding. The nanocomposites were characterized by atomic force microscopy and scanning electron microscopy. Their crystallization behavior on a hot stage was investigated with polarized optical microscopy. The size and regularity of the spherulites of the PEO matrix were altered significantly by the incorporation of Cloisite 30B, but there was not as much variation with the other two clays. The dynamic viscoelastic behavior of the PEO/organoclay nanocomposites was assessed with a strain‐controlled parallel‐plate rheometer. The effects of clay modification on the thermomechanical and rheological properties were addressed. The reinforcing effect of the organoclay was determined with dynamic mechanical analysis and tensile testing. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Microstructure, tensile properties, and biodegradability of aliphatic polyester/clay nanocomposites

Novel biodegradable aliphatic polyester (APES)/organoclay nanocomposites were prepared through melt intercalation method. Two kinds of organoclays, Cloisite 30B and Cloisite 10A with different ammonium cations located in the silicate gallery, were chosen for the nanocomposites preparation. The dispersion of the silicate layers in the APES hybrids was characterized by using X-ray diffraction (XRD) and transmission electron microscopy (TEM). Tensile properties and the biodegradability of the APES/organoclay nanocomposites were also studied. APES/Cloisite 30B hybrids showed higher degree of intercalation than APES/Cloisite 10A hybrids due to the strong hydrogen bonding interaction between APES and hydroxyl group in the gallery of Cloisite 30B silicate layers. This leads to higher tensile properties and lower biodegradability for APES/Cloisite 30B hybrids than for the APES/Cloisite 10A hybrids.     

Thermal degradation of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) as studied by TG,TG–FTIR,and Py–GC/MS

The thermal degradation kinetics of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [poly(HB–HV)] under nitrogen was studied by thermogravimetry (TG). The results show that the thermal degradation temperatures (T_o, T_p, and T_f) increased with an increasing heating rate (B). Poly(HB–HV) was thermally more stable than PHB because its thermal degradation temperatures, T_o(0), T_p(0), and T_f(0)—determined by extrapolation to B = 0°C/min—increased by 13°C–15°C over those of PHB. The thermal degradation mechanism of PHB and poly(HB–HV) under nitrogen were investigated with TG–FTIR and Py–GC/MS. The results show that the degradation products of PHB are mainly propene, 2‐butenoic acid, propenyl‐2‐butenoate and butyric‐2‐butenoate; whereas, those of poly(HB–HV) are mainly propene, 2‐butenoic acid, 2‐pentenoic acid, propenyl‐2‐butenoate, propenyl‐2‐pentenoate, butyric‐2‐butenoate, pentanoic‐2‐pentenoate, and CO₂. The degradation is probably initiated from the chain scission of the ester linkage. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1530–1536, 2003     

Preparation,crystallization, and properties of biodegradable poly(butylene adipate‐co‐terephthalate)/organomodified montmorillonite nanocomposites

Intercalated and exfoliated nanocomposites of biodegradable poly(butylene adipate‐co‐terephthalate) (PBAT) and Cloisite 30B (C30B) were fabricated by a solution‐casting method to study the effects of the clay loading on the crystallization behavior, thermal stability, and dynamic mechanical properties of PBAT in PBAT/C30B nanocomposites. X‐ray diffraction and transmission electron microscopy results indicated the formation of exfoliated nanocomposites at low clay loadings (<5 wt %) and a mixture of exfoliated and intercalated nanocomposites with a clay content of 8 wt % throughout the PBAT matrix. Nonisothermal melt crystallization studies indicated that C30B enhanced the crystallization of PBAT, apparently because of a heterogeneous nucleation effect. Moreover, an attempt was made to quantitatively study the influence of the presence of C30B and its contents on the nucleation activity of PBAT in the PBAT/C30B nanocomposites. The thermal stability of PBAT decreased slightly in the nanocomposites. However, the storage modulus of PBAT apparently increased with the C30B loading increasing in the PBAT/C30B nanocomposites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polybutadiene rubber/organoclay nanocomposites: Effect of organoclay with various modifier concentrations on the vulcanization behavior and mechanical properties

It has been reported that the cure time t₉₀, scorch time t₂, and their difference (t₉₀?t₂) of Polybutadiene rubber (BR)/organoclay nanocomposites were much reduced over those of BR. This effect can be attributed to the ammonium groups in the organoclay. The possible formation of a Zn complex in which sulfur and ammonium modifier participate may facilitate the formation of crosslinks. If this assumption is true, it is expected that the organoclay with higher ammonium modifier concentration will give larger torque difference and faster vulcanization rate to the BR/organoclay nanocomposites. The effect of organoclay with different modifier concentration on the vulcanization behavior and mechanical properties of BR/organoclay hybrid was investigated in this study. As expected, the order of the torque difference was BR/Cloisite 15A > BR/Cloisite 10A > BR/Cloisite 20A > BR/Cloisite 25A > BR/Cloisite 30B > BR/Cloisite Na⁺, and the order of vulcanization rate also showed similar trends. The organoclay with higher modifier concentration gave larger torque difference and faster vulcanization rate to the BR/organoclay nanocomposites. POLYM. ENG. SCI., 47:308–313, 2007. © 2007 Society of Plastics Engineers.     

Thermally stable low‐density polyethylene/polyhydroxybutyrate pairs: Synergy between organomodified nanoclay and LDPE‐g‐MAH

Nanocomposites of low‐density polyethylene/polyhydroxybutyrate (LDPE/PHB) containing organomodified montmorillonite (OMMT) and/or LDPE grafted maleic anhydride (LDPE‐g‐MAH) were prepared with a wide range of composition ratios using a vertical co‐rotating twin‐screw microCompounder. To infer the effect of OMMT and LDPE‐g‐MAH on the thermal stability of prepared nanocomposites, all samples were characterized by thermogravimetric analysis while changing clay and compatibilizer contents. Accordingly, two commonly used kinetic models (Coats–Redfern and Horowitz–Metzger) were employed to correlate the thermal stability of the samples with kinetic parameters, including activation energy and pre‐exponential factor. Furthermore, morphological features of LDPE/PHB in the presence or absence of OMMT and LDPE‐g‐MAH were studied using scanning electron microscopy, transmission electron microscopy, and wide‐angle X‐ray diffraction analysis. It was found that for a specific OMMT composition ratio (1 wt %), the thermal stability is enhanced due to an exfoliated structure. However, for samples containing more organoclay (>=3 wt %), the thermal stability was reduced showing the competition between the barrier effect of organoclay platelets and the catalyzing effect of ammonium salts. Moreover, when using LDPE‐g‐MAH as compatibilizer, it acted as a good coupling agent in all compositions in LDPE major phase systems in contrast to PHB major phase samples. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45922.     

Synergistic reinforcement of NBR by hybrid filler system including organoclay and nano‐CaCO3

Rubber nanocomposites containing one type of nanofiller are common and are widely established in the research field. In this study, nitrile rubber (NBR) based ternary nanocomposites containing modified silicate (Cloisite 30B) and also nano‐calcium carbonate (nano‐CaCO₃) were prepared using a laboratory internal mixer (simple melt mixing). Effects of the hybrid filler system (filler phase have two kind of fillers) on the cure rheometry, morphology, swelling, and mechanical and dynamic–mechanical properties of the NBR were investigated. Concentration of nano‐CaCO₃ [0, 5, 10, and 15 parts per one hundred parts of rubber by weight (phr)] and organoclay (0, 3, and 6 phr) in NBR was varied. The microstructure and homogeneity of the compounds were confirmed by studying the dispersion of nanoparticles in NBR via X‐ray diffraction and field emission scanning electron microscopy. Based on the results of morphology and mechanical properties, the dual‐filler phase nanocomposites (hybrid nanocomposite) have higher performance in comparison with single‐filler phase nanocomposites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42744.     

Effect of nanofillers as reinforcement agents for lignin composite fibers

Biobased nanocomposites and composite fibers were prepared from organosolv lignin/organoclay mixtures by mechanical mixing and subsequent melt intercalation. Two organically‐modified montmorillonite (MMT) clays with different ammonium cations were used. The effect of organoclay varying from 1 to 10 wt % on the mechanical and thermal properties of the nanocomposites was studied. Thermal analysis revealed an increased in T_g for the nanocomposites as compared with the original organosolv lignin. For both organoclays, lignin intercalation into the silicate layers was observed using X‐ray diffraction (XRD). The intercalated hybrids exhibited a substantial increase in tensile strength and melt processability. In the case of organoclay Cloisite 30B, X‐ray analysis indicates the possibility of complete exfoliation at 1 wt % organoclay loading. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Formation of polymer nanocomposites with various organoclays

The role of the type of organic modifier used with montmorillonite (MMT) on the formation of polymer/clay nanocomposites in the melt compounding process was investigated. Various organoclays including primary [12‐aminolauric acid (12ALA)], secondary [dioctylamine (DOA)], tertiary [trioctylamine (TOA)], and two commercial quaternary (Cloisite 30B and 20A) MMTs were melt compounded with carefully selected polymers including polypropylene, polystyrene, styrene–acrylonitrile copolymer, poly(methyl methacrylate), poly(vinylidene fluoride), and acrylonitrile–butadiene copolymer (NBR). X‐ray diffraction and transmission electron microscopy characterizations confirmed that the two quaternary ammonium organoclay (Cloisite 30B and 20A) have superior compatibility compared to the primary (12ALA), secondary (DOA), and tertiary (TOA) ammonium organoclay. DOA and TOA can form polymer/clay nanocomposites only with the most polar polymer (NBR). Cloisite Na⁺ and 12ALA can not form nanocomposite with any polymers. The large organic surface area of the quaternary ammonium organoclay could be the reason of the best compatibility with polar polymers. It is estimated that long alkyl ammonium chains of organic modifier can spread over the clay surface more effectively than short alkyl chains. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1888–1896, 2005     

Nanocomposites based on polycarbonate/poly (butylene terephthalate) blends effects of distribution and type of nanoclay on morphological behavior

Polycarbonate/poly (butylene terephthalate) (PC/PBT) is an example of an immiscible/(partially miscible) binary polymer blend with a wide range of applications. In some applications, the low stiffness limits the end uses of this blend and can be improved by the incorporation of nanoparticles. Nanocomposites based on PC/PBT and three types of commercial layered silicate were prepared via melt processing by using an internal mixer. The three types of organoclay were Cloisite 15A, Cloisite 20A, and Cloisite 30B. The main aim of the work focused on the morphology behavior and the determination of the location of the organoclays in the polymeric phases. The wetting coefficient based on Young's equation was evaluated in order to predict the distribution of organoclays in the polymeric phases by considering the temperature effect. The results revealed that the three types of organoclay were located in the PBT phase, while the results from transmission electron microscopy, scanning electron microscopy, and dynamic mechanical thermal analysis showed a contradiction for Cloisite 30B that was attributable mainly to thermal degradation of this type of nanoparticle during melt processing. Morphological studies showed that intercalated morphology for nanocomposites containing Cloisite 20A and Cloisite 15A led to significant enhancement of the transesterification reaction, while de‐intercalation occurred for samples including Cloisite 30B. J. VINYL ADDIT. TECHNOL., 19:203‐212, 2013. © 2013 Society of Plastics Engineers     

Interaction of a phosphorus‐based FR,a nanoclay and PA6—Part 1: Interaction of FR and nanoclay

The thermal decomposition of organophosphorus fire‐retardant (OP1311) and/ or organonanoclay (Cloisite 30B) is hereby investigated employing thermogravimetric analysis (TGA), to give an insight into their intrinsic behaviour and interaction in polymer nanocomposites for fire safety applications, because the addition of OP1311 and Cloisite 30B in Polyamide 6 (PA6) seems to have a synergistic effect on the thermal decomposition of PA6 (part 2 of the paper). An important objective of this research was to determine to what extent phosphorus components escape in the gaseous phase, which will affect the heat of combustion of the fire‐retarded polymer. The decomposition products arising from pyrolysis and combustion are investigated by means of Fourier transform infrared spectroscopy. Under pyrolytic conditions, the inclusion of Cloisite 30B into OP1311 (FR) shows a synergistic effect on the initial mass loss at low temperature of ～280–420°C and leads to the acceleration of the thermal degradation process. While the DTG curve of Cloisite 30B shows two distinct degradation peaks (steps) that of OP1311 and OP1311 plus Cloisite 30B show four degradation steps. TGA measurements of OP1311 in nitrogen show more mass loss than in air, whereas Cloisite 30B gives similar amounts of mass loss in air and nitrogen. In nitrogen, the major evolved gaseous species from Cloisite 30B alone are hydrocarbons, 2‐(diethylamino)ethanol and water, whereas the evolved gases from that of OP1311 at ～320°C are mainly water, at ～420°C, carbon dioxide, water and ammonia and at 480–570°C diethylphosphinic acid. Under thermo‐oxidative conditions, the gases evolved are mainly carbon dioxide and water from both Cloisite 30B and OP1311. Copyright © 2009 John Wiley & Sons, Ltd.