Characterization of protein extracted from flaked,defatted, whole corn by the sequential extraction process

An investigation was conducted to identify and characterize protein extracted by 45% ethanol:55% 0.1 M NaOH from flaked, defatted, undegermed corn (Zea mays L.) during Sequential Extraction Processing (SEP). This new approach to corn milling, SEP, recycles the ethanol produced from the fermentation of cornstarch to upstream steps of protein extraction and the simultaneous extraction of corn oil and dehydration of the ethanol. About 10% of the protein was extracted by ethanol during counter-current-percolation oil extraction. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and amino acid analysis identified this protein as zein. Nearly 65% of the total protein was recovered by the process in the protein extraction step from soft dent corn (Pioneer 3377), medium-hard dent corn (Pioneer 3732) and high-lysine corn. The freeze-dried solids of the ethanol/alkali extracts from these corn hybrids contained about 80% crude protein (db). The amino acids were present in quantities similar to those in whole corn and markedly higher than those in corn gluten meal. These results indicate that SEP produces high-quality protein suitable for food and industrial uses. Paper presented at the Symposium on Oilseed Processing for Edible Food and Feed Products, 82nd Annual Meeting of the AOCS, May 12–15, 1991. Research Associate, Assistant Professor, and Professor, respectively.     

Decomposition of Bt and Non-Bt Corn Hybrid Residues in the Field

Results of a previous laboratory study indicated that six transgenic crops expressing the Cry1Ab insecticidal protein from Bacillus thuringiensis (Bt) decomposed at a slower rate than their respective non-Bt isolines. Consequently, litter decomposition rates, nitrogen cycling, and carbon pools may change in agricultural systems as the result of the widespread use of Bt crops. In this study, we assessed the decomposition rates and chemical composition of commonly grown hybrids of Bt and non-Bt isolines of corn (Zea mays L.) in the field. Leaves, stalks, and cobs from two Bt corn hybrids (Pioneer 34N44 Bt and NC+ 4990 Bt) and their non-Bt isolines (Pioneer 34N43 and NC+ 4880) were analyzed for biomass fractions (soluble, hemicellulose, cellulose, and lignin) and total C and N content. Litterbags containing these residues were buried at a depth of 10 cm in a Holdrege silt loam (fine-silty, mixed, mesic Typic Argiustolls) soil and recovered 5, 11, 17, and 23 months after placement in the field. There were no differences in the rates of decomposition and mass of C remaining over time between the Bt and non-Bt corn residues. Plant parts differed in decomposition rates where leaves > stalks > cobs. There were differences in total C, total N, biomass fractions, and C:N ratios between initial Bt and non-Bt corn residues, and between companies (NC+ and Pioneer), however, these differences did not result in differences in their rates of decomposition or mass of C remaining over time. For each plant part, there were no differences in lignin content between the Bt and non-Bt residues. These data suggest that the Bt and non-Bt corn hybrids used in this study should not cause differences in carbon sequestration when their residues decompose under similar environmental conditions.     

EFFECTS OF HYBRID AND DAMAGE ON MOLD DEVELOPMENT DURING LOW TEMPERATURE DRYING AND STORAGE OF HIGH MOISTURE SHELLED CORN

Several corn hybrids either resistant or susceptible to storage mold were harvested with a combine and stored at high moistures (19 to 24% moisture, wet basis) in 0.81 m³ (23 bu) bins nd in “mini-bins” containing 1200 g (2.6 lbs). For several hybrids, two damage levels were achieved by adjusting combine cylinder speed. Storage conditions were the same as those found in a low temperature drying bin. Mold growth in the bins and “mini-bins” was monitored by determining number of propagules, percent seeds fine material was removed from all hybrids tested in 1986, whereas in 1985 it was not removed. This probably improved the storability of the 198 6 corn and reduced the differences in mold invasion. Furthermore, the sporulation and growth of mold were lower and differences may not have had time to develop.

Bin and small scale tests were consistent in differentiating the relative resistance of hybrids and they agreed with results of laboratory studies (Friday, 19,87). Some of the observed differences can be attributed to physical damage. However, there was an incremental decrease in storability above that which could be explained by damage, which the authors believe was caused by the hybrid effect. FRB73 × Mol7 was consistently more resistant to storage molds than the other hybrids tested. FRB73 × Mol7 and FR35 × FR20 displayed a higher level of mold resistance in all storage tests while P3707 and P3377 were consistently more susceptible. (Authors note: not all Pioneer hybrids are more susceptible to storage molds as some Pioneer hybrids have been found to store well in laboratory tests.)

The agreement of the bin, small scale, and laboratory studies suggests that hybrids can be screened for mold resistance in the laboratory. Hopefully, this will encourage plant breeders to begin such screening. This would be even more feasible if the laboratory procedures could be simplified and if the incubation time prior to evaluation for mold invasion could be reduced.     

EFFECTS OF HYBRID AND DAMAGE ON MOLD DEVELOPMENT DURING LOW TEMPERATURE DRYING AND STORAGE OF HIGH MOISTURE SHELLED CORN

Several corn hybrids either resistant or susceptible to storage mold were harvested with a combine and stored at high moistures (19 to 24% moisture, wet basis) in 0.81 m³ (23 bu) bins nd in “mini-bins” containing 1200 g (2.6 lbs). For several hybrids, two damage levels were achieved by adjusting combine cylinder speed. Storage conditions were the same as those found in a low temperature drying bin. Mold growth in the bins and “mini-bins” was monitored by determining number of propagules, percent seeds fine material was removed from all hybrids tested in 1986, whereas in 1985 it was not removed. This probably improved the storability of the 198 6 corn and reduced the differences in mold invasion. Furthermore, the sporulation and growth of mold were lower and differences may not have had time to develop.

Bin and small scale tests were consistent in differentiating the relative resistance of hybrids and they agreed with results of laboratory studies (Friday, 19,87). Some of the observed differences can be attributed to physical damage. However, there was an incremental decrease in storability above that which could be explained by damage, which the authors believe was caused by the hybrid effect. FRB73 × Mol7 was consistently more resistant to storage molds than the other hybrids tested. FRB73 × Mol7 and FR35 × FR20 displayed a higher level of mold resistance in all storage tests while P3707 and P3377 were consistently more susceptible. (Authors note: not all Pioneer hybrids are more susceptible to storage molds as some Pioneer hybrids have been found to store well in laboratory tests.)

The agreement of the bin, small scale, and laboratory studies suggests that hybrids can be screened for mold resistance in the laboratory. Hopefully, this will encourage plant breeders to begin such screening. This would be even more feasible if the laboratory procedures could be simplified and if the incubation time prior to evaluation for mold invasion could be reduced.     

Mutational analysis of the myxovirescin biosynthetic gene cluster reveals novel insights into the functional elaboration of polyketide backbones

It has been proposed that two acyl carrier proteins (ACPs)-TaB and TaE--and two 3-hydroxy-3-methylglutaryl synthases (HMGSs)--TaC and TaF--could constitute two functional ACP-HMGS pairs (TaB/TaC and TaE/TaF) responsible for the incorporation of acetate and propionate units into the myxovirescin A scaffold, leading to the formation of beta-methyl and beta-ethyl groups, respectively. It has been suggested that three more proteins--TaX and TaY, which are members of the superfamily of enoyl-CoA hydratases (ECHs), and a variant ketosynthase (KS) TaK--are shared between two ACP-HMGS pairs, to give the complete set of enzymes required to perform the beta-alkylations. The beta-methyl branch is presumably further hydroxylated (by TaH) and methylated to produce the methoxymethyl group observed in myxovirescin A. To substantiate this hypothesis, a series of gene-deletion mutants were created, and the effects of these mutations on myxovirescin production were examined. As predicted, DeltataB and DeltataE ACP mutants revealed similar phenotypes to their associated HMGS mutants DeltataC and DeltataF, respectively, thus providing direct evidence for the role of TaE/TaF in the formation of the beta-ethyl branch and implying a role for TaB/TaC in the formation of the beta-methyl group. Production of myxovirescin A was dramatically reduced in a DeltataK mutant and abolished in both the DeltataX and the DeltataY mutant backgrounds. Analysis of a DeltataH mutant confirmed the role of the cytochrome P450 TaH in hydroxylation of the beta-methyl group. Taken together, these experiments support a model in which the discrete ACPs TaB and TaE are compatible only with their associated HMGSs TaC and TaF, respectively, and function in a substrate-specific manner. Both TaB and TaC are essential for myxovirescin production, and the TaB/TaC pair can rescue antibiotic production in the absence of either TaE or TaF. Finally, the reduced level of myxovirescin production in the DeltataE mutant, relative to the DeltataF strain, suggests an additional function of the TaE ACP.     

Poly(imide-amide)-poly(ethylene glycol) hybrid networks: nanostructure,molecular dynamics and membrane properties

Summary Nanometer-scale structure, molecular dynamics (at 100-580 K) and membrane properties were studied in two series of poly(imide-amide) (PIA)-poly(ethylene glycol) (PEG) hybrid networks with regularly varied composition and different lengths of PEG crosslinks (M_n= 1000 or 3400). Combined WAXD/SAXS/polarized microscopy/DSC/DRS/TSDC/creep rate spectroscopy (CRS) analysis of these hybrids was performed. Depending on their composition, semicrystalline or mesomorphous, or amorphous state, and nanostructural heterogeneity were observed for these networks. They could be subdivided into (a) the PIA-rich hybrids with spatially isolated PEG domains, “suppressed” dynamics in the PEG glass transition, and PIA domains with T_g=520–570 K (group 1), and (b) the other hybrids with a continuous PEG phase and low-temperature glass transition only (group 2). Heterogeneity in segmental dynamics was revealed by CRS over the temperature range from T_g^PEG to T_g^PIA. In the second group of hybrids, the permeability coefficients were higher, by two or three orders of magnitude, for organic vapors than those for air gases.     

Chemical Composition of Corn Leaf Essential Oils and Their Role in the Oviposition Behavior of Sesamia nonagrioides Females

The chemical composition of the volatile oils collected by steam distillation from leaves of seven corn hybrids and their effect on the oviposition behavior of Sesamia nonagrioides females was studied. Samples of the volatile oils from each of the hybrids were analyzed by capillary gas chromatography-mass spectrometry (GC-MS) and several major compounds were identified. The major compound found in all seven hybrids was 3,7,11,15-tetramethyl-2-hexadecen-1-ol (phytol), ranging from 38.3 to 64.9% of the total quantity. Compounds detected in significant proportions include (Z)-3-hexenol (3.1 to 8%), nonanal (4.9 to 14.5%), pentadecanal (1.8 to 5.8%), neophytadiene (5.5 to 12.9%), (Z)-3-hexenyl acetate (2.5 to 8.9%), and an analogue of 2,4-dihydroxy-7-methoxy-(2H)-1,4-benzoxazin-3-(4H)-one (DIMBOA) (2.4 to 9.3%). The analysis showed no qualitative differences among the chemicals identified while quantitative differences were detected. Among the volatile oils, the significant difference was in the quantity of aldehydes present. In two-choice bioassays, filter paper sticks treated with volatile oils containing higher quantity of aldehydes received fewer eggs than those with lower aldehyde quantity. Bioassays with synthetic aldehydes of a chain length C9-C14 confirmed the above results.     

Metabolic parameters and risk factors associated with abdominal obesity among female adolescents in public schools in the Distrito Federal (Brazil)

This study aimed to estimate the prevalence of abdominal obesity and investigate their association with parameters markers of metabolic syndrome (MS) and its risk factors in female adolescents. It is a cross-sectional study with 150 adolescents from 10 public schools in the Federal District, Brazil. The presence of abdominal obesity was considered by measuring waist circumference above the 80th percentile, according to Taylor et al. (2000). The associated factors included sociodemographic characteristics, health status of adolescents and their parents, physical activity, eating habits, blood pressure and biochemical profile. The abdominal obesity prevalence ratio (PR) was estimated by Poisson regression model, with 95% CI. Among the adolescents studied (age= 15.6 +/- 0.8 years; BMI = 21.0 +/- 3.0 kg/m2), prevalence of abdominal obesity was 20%, and this condition was not associated with sociodemographic variables, physical activity and diet. However, abdominal obesity was significantly associated with intake of less than 4 meals a day (PR = 2.27; IC95% 1.27-4.10), previous obesity (PR = 2.36; IC95% 1.31-4.01), history of parental chronic disease (PR = 3.55; IC 95% 1.63-7.75), fasting insulin = 15 uUi/mL (PR = 3.05; IC 95% 1.36-6.82) e HDL-c > 40 mg/dL (PR = 0.39; IC95% 0.23-0.67). In this population, modifiable factors, family history and determinants of MS, such as insulin and HDL-c were associated with abdominal obesity, which points to the need for effective health promotion among adolescents.     

Pervaporation of nonaqueous ethanol azeotropes through interpenetrating polymer network membranes prepared from poly(4-vinylpyridine) and poly(vinyl alcohol)

Highly hydrophilic interpenetrating polymer network (IPN) membranes were prepared from a mixture system of poly(4-vinylpyridine) (P4VP) and poly(vinyl alcohol) (PVA) by quaternizing crosslinking of P4VP with 1,4-dibromobutane (DBB) and simultaneous crosslinking of PVA with hexamethylene diisocyanate (HMDI). The membrane performance in pervaporation (PV) for the azeotropic mixture of ethanol with a less polar organic liquid (chloroform, benzene, carbon tetrachloride, and cyclohexane) was investigated. The strength of these IPN membranes was higher than that of the cellulose acetate membrane and depended on the membrane composition. All the membranes were ethanol permselective for the azeotropic feeds and equimolar mixture feeds as well. Only the swelling degree Q of the membrane, among several physicochemical factors, showed a relationship with the separation performance for the four feeds; a lower value of Q generally corresponded to a higher separation factor and smaller permeability. The membrane composition, which exhibited an optimum membrane performance, was examined in detail for some membranes. Both the separation factor for sorption and that for diffusion far exceeded unity, but the latter was greater in most cases than was the former and dominated the overall separation. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2729–2738, 2001     

Relationships between glucose, energy intake and dietary composition in obese adults with type 2 diabetes receiving the cannabinoid 1 (CB1) receptor antagonist, rimonabant

ABSTRACT: BACKGROUND: Weight loss is often difficult to achieve in individuals with type 2 diabetes and anti-obesity drugs are often advocated to support dietary intervention. Despite the extensive use of centrally acting anti-obesity drugs, there is little evidence of how they affect dietary composition. We investigated changes in energy intake and dietary composition of macro- and micronutrients following therapy with the endocannabinoid receptor blocker, rimonabant. METHODS: 20 obese patients with type 2 diabetes were studied before and after 6 months dietary intervention with rimonabant. Dietary intervention was supervised by a diabetes dietician. Five-day food diaries were completed at baseline and at 6 months and dietary analysis was performed using computer software (Dietplan 6). RESULTS: After 6 months, (compared with baseline) there were reductions in weight (107+/-21Kg versus 112+/-21, p<0.001, 4% body weight reduction), and improvements in HbA1c (7.4+/-1.7 versus 8.0+/-1.6%, p<0.05) and HDL cholesterol. Intake of energy (1589+/-384 versus 2225+/-1109kcal, p<0.01), carbohydrate (199+/-74 versus 273+/-194g, p<0.05), protein (78+/-23 versus 98+/-36g, p<0.05), fats (55+/-18 versus 84+/-39g, p<0.01) and several micronutrients were reduced. However, relative macronutrient composition of the diet was unchanged. Improvement in blood glucose was strongly correlated with a reduction in carbohydrate intake (r = 0.76, p<0.001). CONCLUSIONS: In obese patients with type 2 diabetes, rimonabant in combination with dietary intervention led to reduced intake of energy and most macronutrients. Despite this, macronutrient composition of the diet was unaltered. These dietary changes (especially carbohydrate restriction) were associated with weight loss and favourable metabolic effects.     

Anti-Inflammatory,Antioxidant, Moisturizing,and Antimelanogenesis Effects of Quercetin 3-O-β-D-Glucuronide in Human Keratinocytes and Melanoma Cells via Activation of NF-κB and AP-1 Pathways

Quercetin 3-O-β-D-glucuronide (Q-3-G), the glucuronide conjugate of quercetin, has been reported as having anti-inflammatory properties in the lipopolysaccharide-stimulated macrophages, as well as anticancer and antioxidant properties. Unlike quercetin, which has been extensively described to possess a wide range of pharmacological activities including skin protective effects, the pharmacological benefits and mechanisms Q-3-G in the skin remained to be elucidated. This study focused on characterizing the skin protective properties, including anti-inflammatory and antioxidant properties, of Q-3-G against UVB-induced or H₂O₂-induced oxidative stress, the hydration effects, and antimelanogenesis activities using human keratinocytes (HaCaT) and melanoma (B16F10) cells. Q-3-G down-regulated the expression of the pro-inflammatory gene and cytokine such as cyclooxygenase-2 (COX-2) and tumor necrosis factor (TNF)-α in H₂O₂ or UVB-irradiated HaCaT cells. We also showed that Q-3-G exhibits an antioxidant effect using free radical scavenging assays, flow cytometry, and an increased expression of nuclear factor erythroid 2- related factor 2 (Nrf2). Q-3-G reduced melanin production in α-melanocyte-stimulating hormone (α-MSH)-induced B16F10 cells. The hydration effects and mechanisms of Q-3-G were examined by evaluating the moisturizing factor-related genes, such as transglutaminase-1 (TGM-1), filaggrin (FLG), and hyaluronic acid synthase (HAS)-1. In addition, Q-3-G increased the phosphorylation of c-Jun, Jun N-terminal kinase (JNK), Mitogen-activated protein kinase (MAPK) kinase 4 (MKK4), and TAK1, involved in the MAPKs/AP-1 pathway, and the phosphorylation of IκBα, IκB kinase (IKK)-α, Akt, and Src, involved in the NF-κB pathway. Taken together, we have demonstrated that Q-3-G exerts anti-inflammatory, antioxidant, moisturizing, and antimelanogenesis properties in human keratinocytes and melanoma cells through NF-κB and AP-1 pathways.     

Dynamics of novel hydrogen-bonded acidic fluorinated poly(amide-imide-silica) hybrids studied by solid-state NMR

Novel hydrogen-bonded acidic fluorinated poly(amide-imide-silica) hybrid materials, FPAI-SiO₂ (6E and 6F) series, were synthesized by a sol-gel process. The structures and spin relaxation of the hybrids were characterized by infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR) spectroscopy. The abundant Q⁴ structures implied that in free catalyst the degree of condensation of tetramethoxysilane was enhanced by hydrogen-bonded acidic fluorinated poly(amide-imide). The dynamics on the local mobility of the hybrids was investigated by the time constant for energy exchange between ¹H and ²⁹Si spin system (T_SiH) and spin-diffusion path length (L) measurements. It was found that the faster T_SiH of 6E and 6F hybrids compared with the previous study of similar 6C and 6D hybrids implied that 6E and 6F hybrids had more aggregated structures even though the organic terminal segment changed from rigid imide to more flexible amide. The interactions of the charge transfer between donor and acceptor molecules or π-π aromatic stacking may be the dominant factors to affect the structures of 6E and 6F hybrids. Moreover, M¹ and D² segments of 6F hybrids had the same level mobility and the mobility of the 6F hybrids was little improved as the soft and flexible 1,3-bis(3-aminopropyl)-tetramethyl-disiloxane segment was incorporated in the dense structures of 6F hybrids. All of the L values of 6E and 6F hybrids were on the scale of 3.5-4.0 nm. The result also suggested that 6E and 6F hybrids had similar denser structures as 6D hybrids.     

Nutritional quality of the protein of the false lentil (Vicia sativa ssp. abovata (Ser) Gaudin

The common vetch (Vicia sativa) is a legume that grows spontaneously in the central zone of Chile. It is consumed by the rural population, as lentil, and frequently it is utilized in animal feeding. The objective of the present work was to study the biological quality of its protein and protein digestibility, as well as its dietary fiber pattern. The samples studied were provided by the Instituto de Investigaciones Agropecuarias (INIA), where in its chemical composition, dietary fiber, biological protein quality (PER) and apparent and true protein digestibility, were determined. Results showed a high protein concentration (23.5%), higher than (in the legumes commonly consumed. Total dietary fiber and its fractions, insoluble and soluble fiber, attained values of 14.2%, 13.2% and 1.0% respectively. The PER in the raw material was 1.30 +/- 0.44 and 1.32 +/- 0.37 in the cooked one; supplementation with 0.15% DL-methionine caused a rise to 2.43 +/- 0.32, the casein value being 3.02 +/- 0.36. True digestibility was 76.2 +/- 2.0 in the raw material, and 73.8 +/- 2.2 in the cooked one. These findings suggest that common vetch has no termolabile toxics, which are normally present in legumes. However, the literature mentions that it contains a neurotoxic, the B-ciano-L-alanine. The present study suggests that common vetch is a promisory food resource; thus, it is highly desirable that studies be undertaken oriented to determine the toxicity in this food.     

Changes in body composition in lactating adolescent mothers

We assessed changes in body composition in lactating adolescent mothers living under unfavorable socioeconomic and sanitary conditions. A total of 17 healthy primiparous adolescents under 17 years of age attending the Maternity Hospital of the city of La Plata, Argentina, were followed at 4 time points (15 days and 3, 6 and 12 months postpartum) to assess, a) dietary intake, b) practice of physical activity, c) nutritional condition (weight, height, body mass index [BMI] according to age, and body composition by the sum of skinfold measurements), d) characteristics of lactation, and e) growth parameters of the child. The mean age of adolescents was 15.06 +/- 0.66 years (mean menarchal age, 11.59 +/- 0.80 years). All adolescents breastfed up to 12 months postpartum, and maternal milk covered above 80% the baby intake (mean 7.06 +/- 2.54 breast feeds/day). While the daily intake of nutrients by adolescent mothers was constant up to 6 months postpartum, there was a modest decrease in that of proteins, carbohydrates and lipids 15 days and 12 months postpartum. The decrease in energetic intake during the same period was significant (p < 0.05). The practice of physical activity was classified as moderate during the follow-up period. Whereas mean basal percent of fat body mass (FBM) was 29.85 +/- 2.87, and decreased significantly at 6 (27.2% +/- 3.9%; p = 0.02) and 12 (26.1% +/- 3.9%; p = 0.002) months postpartum, changes in lean body mass (LBM) were not significant. In conclusion, lactating adolescents maintained LBM, whereas weight, FBM and BMI decreased markedly from 3 months postpartum.     

Hemi-telechelic and telechelic organic/inorganic poly(ethylene oxide) hybrids based on polyhedral oligmeric silsesquioxanes (POSSs): Synthesis,morphology and self-assembly

Amphiphilic hemi-telechelic and telechelic poly(ethylene oxide) (PEO) hybrids based on polyhedral oligmeric silsesquioxane (POSS) were prepared via the copper-catalyzed azide–alkyne “click” reaction. Thermal properties of POSS–PEO were characterized using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The result shows that the thermal properties of telechelic POSS–PEO are effectively enhanced by POSS. The morphology of the POSS-containing PEO hybrid crystals was investigated using polarized optical microscopy (POM), and the results indicate that it is much easier for the POSS in the telechelic POSS–PEO hybrids (T-POSS–PEO) to form quite large aggregates, which act as nucleating agents during the crystallization of the PEO chains. The self-assembly behavior of POSS–PEO in water was also studied using transmission electron microscopy (TEM). The results reveal that hemi-telechelic POSS–PEO hybrids (HT-POSS–PEO) can self-assemble into spherical aggregates, whereas the T-POSS–PEO hybrids self-assemble into ellipsoidal aggregates.     

Quinoline-Dihydropyrimidin-2(1H)-one Hybrids: Synthesis,Biological Activity,and Mechanistic Studies

A novel class of quinoline-dihydropyrimidin-2(1H)-one (DHPM) hybrids was synthesized and in vitro antiplasmodial activity was evaluated against chloroquine sensitive (D10) and chloroquine resistant (Dd2) strains of Plasmodium falciparum, the human malaria parasite. The antiplasmodial activity was compared to previously reported DHPM based molecular hybrids. Dual mode of antiplasmodial action of the most active member has been evaluated through heme binding study and in silico docking in the active site of dihydrofolate enzymes (wild-type as well as mutant). Favourable pharmacokinetic parameters were predicted in the ADMET evaluation. The new hybrids were also tested against a number of DNA and RNA viruses. No antiviral activity was found, except for one hybrid that showed mild inhibitory activity against two strains of cytomegalovirus (AD-169 and Davis), The most active hybrid was found to be a selective inhibitor of the growth of P. falciparum as well as a modest inhibitor of varicella zoster virus in HEL cells. Cytotoxicity of all hybrids was assessed in HEL, HeLa, Vero, MDCK, and CRFK cell cultures.     

Volatile male-specific natural products of a coreid bug (Hemiptera: Heteroptera)

The large coreid bug,Pachylis laticornis (Hemiptera: Coreidae), feeds on several mimosaceous trees in Guanacaste, Costa Rica. In addition to the presumably defensive metathoracic exocrine glands that occur in both sexes of this species, the adult males also possess a ventral abdominal gland, opening midventrally in the 7–8th abdominal intersegmental membrane, that releases volatile compounds. Two esters, (E)-2-hexenyl tiglate and (E)-2-hexenyl (E)-2-hexenoate, account for over 90% of the total volatiles in the ventral abdominal gland secretion of males. (E)-2-Octenyl tiglate and (E)-2-hexenyl benzoate are present at low concentrations, as are at least three other unidentified compounds. The biological role for this fragrant male-specific exudate is unknown.     

Effects of different porous fillers on interfacial properties of poly (vinyl alcohol) hybrid films

Poly(vinyl alcohol) (PVA)-based hybrids have demonstrated broad liquid separation applications but separation performances are constrained by the compatibility between fillers and polymer, and thus it is essential to study the interfacial properties of these hybrids. In this work, PVA hybrids with four different porous fillers have been fabricated and characterized with Fourier transform infrared, X-ray diffraction, Scanning electron microscope, swelling and contact angle tests. Swelling results show that PVA has a degree of swelling (DS) of 79% in water but the swelling is compressed after adding fillers and the DS for PVA hybrids has decreased by 19%, 17%, 15%, and 9% for 30 wt% loading of ZIF-8, UiO-66, Hβ and ZSM-5, respectively. For methanol and its 10 wt% aqueous solution, similar swelling results are obtained due to mutual interactions among the filler, polymer and test liquids. Based on water and glycerol contact angle results, the surface energy of PVA is estimated to be 40.56 Nm⁻¹ and it drops to 27.39 Nm⁻¹ after adding less hydrophilic ZIF-8 or rise to 48.56 Nm⁻¹ after introducing more hydrophilic ZSM-5. The high-film hydrophilicity and then large surface energy have rendered methanol/water sorption selectivity of PVA hybrids decrease to some extent or vice versa.     

Carnitine palmitoyltransferase I, carnitine palmitoyltransferase II, and Acyl-CoA oxidase activities in atlantic salmon (Salmo salar)

Salmon farmers are currently using high-energy feeds containing up to 35% fat; the fish's capability of fully utilizing these high-energy feeds has received little attention. Carnitine is an essential component in the process of mitochondrial fatty acid oxidation and, with the cooperation of two carnitine palmitoyltransferases (CPT-I and CPT-II) and a carnitine acylcarnitine transporter across the inner mitochondrial membrane, acts as a carrier for acyl groups into the mitochondrial matrix where β-oxidation occurs. However, no reports are available differentiating between CPT-I and CPT-II activities in fish. In order to investigate the potential for fatty acid catabolism, the activities of key enzymes involved in fatty acid oxidation were determined in different tissues from farmed Atlantic salmon (Salmo salar), i.e., acyl-CoA oxidase (ACO) and CPT-I and CPT-II. Malonyl-CoA was a potent inhibitor of CPT-I activity not only in red muscle but also in liver, white muscle, and heart. By expressing the enzyme activities per wet tissue, the CPT-I activity of white muscle equaled that of the red muscle, both being>> liver. CPT-II dominated in red muscle whereas the liver and white muscle activities were comparable. ACO activity was high in the liver regardless of how the data were calculated. Based on the CPT-II activity and total palmitoyl-l-carnitine oxidation in white muscle, the white muscle might have a profound role in the overall fatty acid oxidation capacity in fish.     

Thermal,thermomechanical, and electrochemical characterization of the organic–inorganic hybrids poly(ethylene oxide) (PEO)–silica and PEO–silica–LiClO4

To study the effect of the silica content on the properties of the salt‐free and salt‐added hybrids based on poly(ethylene oxide) (PEO) and silica, two series of hybrids, PEO–silica and PEO–silica–LiClO₄ (O:Li, 9:1) hybrids were prepared via the in situ acid‐catalyzed sol–gel reactions of the precursors [i.e., PEO functionalized with triethoxysilane and tetraethyl orthosilicate (TEOS)]. The morphology of the hybrids was examined by scanning electron microscopy (SEM) of the fracture surfaces of the hybrid. The results indicated that the discontinuity develops with increasing the weight percent of silica in both hybrids. The differential scanning calorimetric (DSC) analysis indicated that effects of silica content on the glass transition temperatures (T_g) of the PEO phase were different in salt‐free and salt‐added hybrids. The T_g of PEO phase increased with increasing weight percent of silica in salt‐free hybrids, whereas the curve of T_g of PEO phase and silica content had a maximum at 35 wt % of silica content in salt‐added hybrids. For both salt‐free and salt‐added hybrids, peaks of the loss tangent, determined by dynamic mechanical analysis (DMA) were gradually broadened and lowered with increasing weight percent of silica. The storage modulus, E′, in the region above T_g increases with increasing silica content for both PEO–silica and PEO–silica–LiClO₄ hybrids. In the conductivity and composition curves for PEO–silica–LiClO₄ hybrids, the conductivity shows a maximum value of 3.7 × 10^?6 S/cm, corresponding to the sample with a 35 wt % of silica. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2471–2479, 2001