共查询到20条相似文献,搜索用时 125 毫秒
1.
AlbertJ.Dzermejko 《钢铁译文集》2001,(2):15-25
炉缸的侵蚀是决定高炉一代炉龄的主要因素,应用各种不同的设计理论、内衬结构和耐火材料能克服耐火材料因热震、热应力、不均匀的热膨胀引起的开裂以及化学侵蚀等问题。 相似文献
2.
3.
1耐火材料概述1.1耐火材料的基本概念与性能耐火材料是指耐火度不低于1500℃的无机非金属材料,是服务于高温技术的基础材料,它的主要用途就是砌筑热工窑炉、高温容器以及作为具有特殊作用的功能性材料。耐火材料在使用过程中,会受到多种作用力的破坏,如高温下承受护体及物体的荷重,操作过程中的外应力;温度急剧变化,受热不均产生的内应力;各种高温流体的冲刷;液态金属、炉渣及杂质元素的侵蚀等等。这些作用导致了耐火材料的熔融软化、熔蚀磨损和崩裂损坏。因此,它必须具有良好的组织结构、热学性能、力学性能和使用性能,也就是… 相似文献
4.
钢铁工业用耐火材料的发展趋向 总被引:1,自引:0,他引:1
钢铁工业消耗耐火材料总产量的60~70%,钢铁工业与耐火材料工业休戚与共,互相促进。钢铁生产技术的发展,必然引起耐火材料品种结构的变化。武钢一米七投产后耐火材料品种结构的变化情况如表1。表内列出了我国耐火材料品种结构及日本耐火材料品种结构。 相似文献
5.
6.
我国有色金属工业耐火材料的现状与展望 总被引:1,自引:1,他引:0
详细介绍我国有色金属冶炼的各种设备所使用的耐火材料及存在的问题,并从耐火材料的材质、新技术的应用以及耐火材料的生产管理等方面提出建议。 相似文献
7.
通过与典型钢包炉渣CaO—MgO—Al2O3-SiO2之间的作用得到高氧化铝釉质耐火材料,研究了1600℃条件下,该釉质耐火材料对铝脱氧和钙处理钢水中非金属夹杂物产生的影响,并且研究了釉质耐火材料随反应时间的化学变化以及显微组织变化。由于液态釉质渗透到耐火材料的多孔尖晶石基体区域中,可观察到釉质耐火材料明显发生了化学反应。在钢水中产生各种不同的CaO—MgO—Al2O3-CaS体系非金属夹杂物,主要夹杂物为液态Ca—Al—Mg-O-S夹杂物以及它与固相的混合物,例如CaS、MgO和MgAl2O4。为了更清楚地了解釉质耐火材料与钢水之间的化学反应,采用FaetSage软件完成了热力学分析。 相似文献
8.
介绍氧化铝沸腾焙烧炉的结构、所用耐火材料的特点,以及选择耐火材料的原则,并分析耐火材料在使用过程中存在的问题。 相似文献
9.
10.
11.
《钢铁冶炼》2013,40(5):384-388
AbstractMgO–C brick linings have become standard in basic oxygen furnaces (BOFs) all over the world. Developments in the refractory technology for BOFs over the last few years and their impact on the lifetime and performance of refractory linings are presented. These developments comprise optimised shapes for the lining of BOF and steel fibre reinforced MgO–C bricks. Optimised shapes with double wedges lead to a smooth inner surface of the refractory lining and fewer stresses and refractory consumption. Stainless steel fibre reinforced MgO–C bricks have proven to be the ultimate choice for scrap impacts or other areas with ultra high mechanical loads. They have brought down refractory wear in these particular areas significantly. Moreover, typical lining patterns of different zones in a BOF and the development of the raw material grades (MgO grades and graphite) for refractories as well as the development of lining lifetimes over the last years are discussed. 相似文献
12.
介绍了目前在国内加热炉、热处理炉上应用较多的几种全纤维炉衬耐火纤维模块、锚固件的选择,以及全纤维炉衬模块的施工方法及日常维护要求。 相似文献
13.
14.
根据轧钢加热炉炉衬材料的工作特点以及我国耐火原材料的具体特性,合理地进行耐火材料的选择,并对膨胀缝进行合理的设计,达到轧钢加热炉长寿、高性价比及节能的要求。 相似文献
15.
16.
Hatch (Canada) has developed a system for the nondestructive monitoring of the residual lining thickness in blast furnaces and eletrofurnaces. This system, which is based on an acoustic–ultrasound echo signal (AU-E), supplements the traditional thermal simulation of the furnace lining by means of built-in thermocouples or on the basis of the thermal load on the cooling units in the blast furnace. By this means, the position of cracks and anomalies may be determined, and the boundary between the coating and the refractory may be identified. The constraints and sources of error in the AU-E method are analyzed, and an improved version is outlined. The improved method takes account of the influence of the following factors on the wave propagation: high temperatures; the furnace shape and size; and the difference in acoustic resistance of different layers in a multilayer refractory lining. The AU-E method permits reliable and nondestructive monitoring of the refractory lining in smelting furnaces. The hardware and software of the AU-E system have been significantly improved, so as to obtain measurements of satisfactory accuracy. Estimates of the method’s precision are confirmed by physical measurements on inoperative blast furnaces. Examples of the utilization of this diagnostic system at various Russian and non-Russian plants are presented. Some technological measures that extend the blast-furnace run are noted. As shown in the present study, the use of several successive measurements permits the determination of the lining’s wear rate and the time remaining before major repair. The AU-E method continues to operate well at more than 70 blast furnaces around the world, including those at the Novolipetsk, Cherepovets, Nizhny Tagil, Western Siberian, and Magnitogorsk steel works, as well as at electrofurnaces producing ferroalloys, copper, and platinum. 相似文献
17.
WP型耐火材料喷补装置 总被引:3,自引:2,他引:1
多种工业炉、罐内的耐火砖衬局部损坏以后可用喷涂耐火材料的方法修补。通用型喷补装置存在某些不足之处,WP型喷补装置吸收了多种喷补装置的长处,作了某些有效的改进。 相似文献
18.
介绍了可塑料的性能特点、施工方法和在鞍钢热轧带钢厂加热炉炉顶上的使用效果.可塑料耐剥落性好,可承受炉温的剧烈变化,使用寿命长,适合在大型的连续加热炉炉顶上推广使用. 相似文献
19.
涟钢高炉有害元素的分布与控制 总被引:1,自引:0,他引:1
研究分析了K,Na,Pb,Zn,Cu,As,Sn等有害元素在涟钢高炉炉料及产品中的分布情况。以光学显微镜、荧光分析仪、扫描电镜等仪器研究了有害元素在烧结矿、球团矿、块矿、焦炭、生铁、炉渣中的分布形态及其在富集载体渣皮、耐火材料、死铁层中的分布情况。同时,对高炉主要原燃料及产品中有害元素与其他元素的相关性进行了分析,并提出了一些控制高炉有害元素危害的方法与原则。 相似文献
20.
加热炉用耐火材料的进展 总被引:7,自引:1,他引:6
综述了加热炉用耐火材料的发展历程 ,介绍了各个时期加热炉用耐火材料的特点及应用情况 ,并重点阐述了正在迅速发展的蓄热式加热炉用耐火材料。还对加热炉用耐火材料的发展方向进行了探讨 相似文献