Ultrathin CeO2 coating for improved cycling and rate performance of Ni-rich layered LiNi0.7Co0.2Mn0.1O2 cathode materials

In this study, we have successfully coated the CeO₂ nanoparticles (CeONPs) layer onto the surface of the Ni-rich layered LiNi_0.7Co_0.2Mn_0.1O₂ cathode materials by a wet chemical method, which can effectively improve the structural stability of electrode. The X-ray powder diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS) are used to determine the structure, morphology, elemental composition and electronic state of pristine and surface modified LiNi_0.7Co_0.2Mn_0.1O₂. The electrochemical testing indicates that the 0.3?mol% CeO₂-coated LiNi_0.7Co_0.2Mn_0.1O₂ demonstrates excellent cycling capability and rate performance, the discharge specific capacity is 161.7?mA?h?g^?1 with the capacity retention of 86.42% after 100 cycles at a current rate of 0.5?C, compared to 135.7?mA?h?g^?1 and 70.64% for bare LiNi_0.7Co_0.2Mn_0.1O₂, respectively. Even at 5?C, the discharge specific capacity is still up to 137.1?mA?h?g^?1 with the capacity retention of 69.0%, while the NCM only delivers 95.5?mA?h?g^?1 with the capacity retention of 46.6%. The outstanding electrochemical performance is assigned to the excellent oxidation capacity of CeO₂ which can oxidize Ni²⁺ to Ni³⁺ and Mn³⁺ to Mn⁴⁺ with the result that suppress the occurrence of Li⁺/Ni²⁺ mixing and phase transmission. Furthermore, CeO₂ coating layer can protect the structure to avoid the occurrence of side reaction. The CeO₂-coated composite with enhanced structural stability, cycling capability and rate performance is a promising cathode material candidate for lithium-ion battery.     

Synthesis of LiNi0.9Co0.1O2 from Li2CO3, NiO or NiCO3, and CoCO3 or Co3O4 and their electrochemical properties

Cathode active materials with a composition of LiNi_0.9Co_0.1O₂ were synthesized by a solid-state reaction method at 850 °C using Li₂CO₃, NiO or NiCO₃, and CoCO₃ or Co₃O₄, as the sources of Li, Ni, and Co, respectively. Electrochemical properties, structure, and microstructure of the synthesized LiNi_0.9Co_0.1O₂ samples were analyzed. The curves of voltage vs. x in Li_xNi_0.9Co_0.1O₂ for the first charge–discharge and the intercalated and deintercalated Li quantity Δx were studied. The destruction of unstable 3b sites and phase transitions were discussed from the first and second charge–discharge curves of voltage vs. x in Li_xNi_0.9Co_0.1O₂. The LiNi_0.9Co_0.1O₂ sample synthesized from Li₂CO₃, NiO, and Co₃O₄ had the largest first discharge capacity (151 mA h/g), with a discharge capacity deterioration rate of −0.8 mA h/g/cycle (that is, a discharge capacity increasing 0.8 mA h/g per cycle).     

Corrosion mechanisms of Al2O3/MgAl2O4 by V2O5, NiO, Fe2O3 and vanadium slag

The effects of V₂O₅, NiO, Fe₂O₃ and vanadium slag on the corrosion of Al₂O₃ and MgAl₂O₄ have been investigated. The specimens of Al₂O₃ and MgAl₂O₄ with the respective oxides above mentioned were heated at 10 °C/min from room temperature up to three different temperatures: 1400, 1450 and 1500 °C. The corrosion mechanisms of each system were followed by XRD and SEM analyses. The results obtained showed that Al₂O₃ was less affected by the studied oxides than MgAl₂O₄. Alumina was only attacked by NiO forming NiAl₂O₄ spinel, while the MgAl₂O₄ spinel was attacked by V₂O₅ forming MgV₂O₆. It was also observed that Fe₂O₃ and Mg, Ni, V and Fe present in the vanadium slag diffused into Al₂O₃. On the other hand, the Fe₂O₃ and Ca, S, Si, Na, Mg, V and Fe diffused into the MgAl₂O₄ structure. Finally, the results obtained were compared with those predicted by the FactSage software.     

Hydroformylation of olefins by Au/Co3O4 catalysts

The hydroformylation of olefins over supported gold catalysts in an autoclave reactor under mild conditions (100–140 °C, 3–5 MPa) has been studied. Over Au/AC (activated carbon), Au/PVP (polyvinylpyrrolidone), Au/Al₂O₃, Au/TiO₂, Au/Fe₂O₃, Au/ZnO, Au/CeO₂ and Co₃O₄, 1-olefin mainly remained unchanged and the major products were isomerized olefins or hydrogenated paraffin. In contrast, Au nanoparticles deposited on Co₃O₄ led to remarkably high catalytic activities in hydroformylation reaction with selectivities above 85% to desired aldehydes. The hydroformylation of olefins proceeds preferentially at temperatures below 140 °C, above which the reactions of olefins gradually shifted to isomerization and then to hydrogenation. It appeared that the activity and selectivity of hydroformylation reaction strongly depend on the molecular structure of olefins, which could be ascribed to steric constraints as internal olefins are relatively inappropriate to form alkyl group and subsequent acyl group by insertion of CO. The Au/Co₃O₄ catalyst can be recycled by simple decantation with slight decrease in catalytic activity along with an increase in recycle times, which is a great advantage over homogeneous catalysts. The role of gold nanoparticles can be assumed to dissociate hydrogen molecule into atomic species which reduce Co₃O₄ to Co metal under mild reaction conditions.     

Designing a structured catalyst for selective reduction of O<Subscript>2</Subscript> by hydrogen in the presence of NO

The influence of the promoter (Pd) modifying additives of oxides of rare-earth (La₂O₃, CeO₂) and transition (NiO, CuO) metal oxides on the catalytic activity of Co₃O₄/cordierite in reactions of O₂ and NO reduction by hydrogen was studied. Introducing Pd and rare-earth metal oxides into the composition of cobalt oxide catalyst results in an increase in its activity in H₂ + 1/2O₂ → H₂O, H₂ + NO → 1/2N₂ + H₂O reactions and an increase in selectivity upon oxygen reduction by hydrogen in the presence of nitric oxide, due possibly to a decrease in the strength of oxygen bounds with the surface and the formation of low-temperature forms of oxygen, which is not typical of unpromoted cobalt oxide catalyst. A structured Pd-Co₃O₄-La₂O₃/cordierite catalyst was developed that surpasses the commercial granulated silver-manganese catalyst used in industry to purify the technological gases used in the production of hydroxylamine sulfate of oxygen impurities with reference to activity and selectivity (in the process of oxygen reduction in the presence of nitric oxide), and to thermal stability.     

Synthesis and electrochemical characteristics of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion batteries

LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials have been coated with Al₂O₃ nano-particles using sol-gel processing to improve its electrochemical properties. The X-ray diffraction (XRD) pattern of the as-prepared Al₂O₃ nano-particles was indexed to the cubic structure of the γ-Al₂O₃ phase and had an average size of ∼4 nm. The XRD showed that the structure of LiNi_1/3Co_1/3Mn_1/3O₂ was not affected by the Al₂O₃ coating. However, the Al₂O₃ coatings on LiNi_1/3Co_1/3Mn_1/3O₂ improved the cyclic life performance and rate capability without decreasing its initial discharge capacity. These electrochemical properties were also compared with those of LiAlO₂-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode material. The electrochemical impedance spectroscopy (EIS) was studied to understand the enhanced electrochemical properties of the Al₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ compared to uncoated LiNi_1/3Co_1/3Mn_1/3O₂.     

Electro-oxidation of coal on NiO and/or Co3O4 modified TiO2/Pt electrodes

A TiO₂/Pt based electrode exhibited better activity for the oxidation of coal in a basic system compared to Ti/Pt, TiO₂–Cu/Pt and pure metal electrodes. The surface morphologies and composition of the electrodes were studied by SEM and XRD, respectively. Linear sweep voltammetry was employed to investigate the catalytic effects of electrodes, and the product of coal oxidization was determined by a gas collection test. The TiO₂/Pt electrodes that were modified with NiO and/or Co₃O₄ exhibited higher average currents and a lower decrease in mass during electrolysis compared to the other electrodes; this finding indicated that NiO and Co₃O₄ play important roles as catalysts.     

Partial oxidation of ethanol over Pd/CeO2 and Pd/Y2O3 catalysts

The effect of the support nature on the performance of Pd catalysts during partial oxidation of ethanol was studied. H₂, CO₂ and acetaldehyde formation was favored on Pd/CeO₂, whereas CO production was facilitated over Pd/Y₂O₃ catalyst. According to the reaction mechanism, determined by DRIFTS analyses, some reaction pathways are favored depending on the support nature, which can explain the differences observed on products distribution. On Pd/Y₂O₃ catalyst, the production of acetate species was promoted, which explain the higher CO formation, since acetate species can be decomposed to CH₄ and CO at high temperatures. On Pd/CeO₂ catalyst, the acetaldehyde preferentially desorbs and/or decomposes to H₂, CH₄ and CO. The CO formed is further oxidized to CO₂, which seems to be promoted on Pd/CeO₂ catalyst.     

Solvent dependent morphological modification of micro-nano assembled Mn2O3/NiO composites for high performance supercapacitor applications

The different attractive morphologies of micro-nano assembled sphere, pseudo sphere, rock candy and cube-like Mn₂O₃/NiO composites were synthesised by the facile solvothermal method through varying the solvents and their volume ratio. The structural, morphological and compositional properties of synthesised samples were investigated by using powder X-ray diffraction (XRD), FE-SEM, EDS and XPS. The TG/DTA results confirmed the transformation of MnCO₃/NiCO₃ to Mn₂O₃/NiO structures. XRD results revealed that the synthesised samples exhibited the body-centred cubic of Mn₂O₃ and face-centred cubic of NiO. FESEM images depicted the formation of different micro-nano assembled morphologies. XPS study confirmed the presence of manganese, nickel and oxygen elements and their oxidation states. Pseudocapacitance properties of Mn₂O₃/NiO electrodes were evaluated by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy using 1M KOH electrolyte solution. The specific capacitance values of all the synthesised samples were calculated and the morphology of rock candy like Mn₂O₃/NiO composite exhibited superior properties of high specific capacitance of 566.21 Fg^?1 at a current density of 0.5 Ag^?1, better rate capability of 63.25% and good cycling stability of 87.42% capacitance retention even after 1000 cycles. From these results, the well morphological ordered Mn₂O₃/NiO composites may be preferred as the future electrode materials for electrochemical supercapacitor energy storage devices.     

Surface of LiCo1/3Ni1/3Mn1/3O2 modified by CeO2-coating

A novel method to improve the cycling performance of LiCo_1/3Ni_1/3Mn_1/3O₂ in lithium-ion batteries by 1.0 wt.% CeO₂-coating is presented in this work. The crystalline structure and morphology of the synthesized powder have been characterized by XRD, SEM, TEM and their electrochemical performances were evaluated by CV, EIS and galvonostatic charge/discharge tests. It is found that CeO₂ forms a layer on the surface of LiCo_1/3Ni_1/3Mn_1/3O₂ without destroying the crystal structure of the core material. Electrochemical test indicates that CeO₂-coating could improve the cycling performance of LiCo_1/3Ni_1/3Mn_1/3O₂. At room temperature, the capacity retention of 1.0 wt.% CeO₂-coated material is 93.2% after 12 cycles at 3.0 C while that of the bare sample is only 86.6%. ICP-OES proves the coating layer could protect the dissolution of the transition metal ions from LiCo_1/3Ni_1/3Mn_1/3O₂. From the analysis of EIS, the improvement of cycle ability could be attributed to the suppression of the reaction between cathode and electrolyte.     

The effect of foreign ions on the reactivity of the CaO-SiO2-Al2O3-Fe2O3 system: Part II: Cations

The subject of this paper is the effect of foreign cations on the reactivity of the CaO-SiO₂-Al₂O₃-Fe₂O₃ system. One reference mixture and eighteen modified mixtures, prepared by mixing the reference sample with 1% w/w of chemical grade MnO₂, CuO, V₂O₅, PbO, CdO, ZrO₂, Li₂O, MoO₃, Co₂O₃, NiO, WO₃, ZnO, Nb₂O₅, CrO₃, Ta₂O₅, TiO₂, BaO₂ and H₃BO₃ were studied. The effect on the reactivity is evaluated on the basis of the free lime content in samples sintered at 1200 and 1450 °C. At 1200 °C, the reactivity of the mixture is greatly increased in the presence of Cu and Li oxides. Based on their effect at 1450 °C, the added elements can be divided into three groups. W, Ta, Cu, Ti and Mo show the most positive effect, decreasing the free CaO (fCaO) content by 30-60%, compared with the pure sample. Cr and B cause an increase of fCaO content, while the rest of the elements exhibit a marginal positive effect. According to their volatility at 1450 °C, the added compounds can be subdivided into three groups of low (Ti⁴⁺, Cu²⁺, Mo⁶⁺, W⁺⁶, V⁵⁺, Zn²⁺, Zr⁴⁺), moderate (Cr⁶⁺, Co³⁺, Ni²⁺, Mn⁴⁺) and high volatility (Cd²⁺, Pb²⁺). All burned samples, analyzed by means of X-ray diffraction, have a final mineralogical composition, which corresponds to the structure of a typical clinker.     

Performance of LiNi1/3Co1/3Mn1/3O2 prepared from spent lithium-ion batteries by a carbonate co-precipitation method

Spherical LiNi_1/3Co_1/3Mn_1/3O₂ cathode particles were resynthesized by a carbonate co-precipitation method using spent lithium-ion batteries (LIBs) as a raw material. The physical characteristics of the Ni_1/3Co_1/3Mn_1/3CO₃ precursor, the (Ni_1/3Co_1/3Mn_1/3)₃O₄ intermediate, and the regenerated LiNi_1/3Co_1/3Mn_1/3O₂ cathode material were investigated by laser particle-size analysis, scanning electron microscopy–energy-dispersive spectroscopy (SEM-EDS), thermogravimetry–differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), inductively coupled plasma–atomic emission spectroscopy (ICP-AES), and X-ray photoelectron spectroscopy (XPS). The electrochemical performance of the regenerated LiNi_1/3Co_1/3Mn_1/3O₂ was studied by continuous charge–discharge cycling and cyclic voltammetry. The results indicate that the regenerated Ni_1/3Co_1/3Mn_1/3CO₃ precursor comprises uniform spherical particles with a narrow particle-size distribution. The regenerated LiNi_1/3Co_1/3Mn_1/3O₂ comprises spherical particles similar to those of the Ni_1/3Co_1/3Mn_1/3CO₃ precursor, but with a narrower particle-size distribution. Moreover, it has a well-ordered layered structure and a low degree of cation mixing. The regenerated LiNi_1/3Co_1/3Mn_1/3O₂ shows an initial discharge capacity of 163.5 mA h g^?1 at 0.1 C, between 2.7 and 4.3 V; the discharge capacity at 1 C is 135.1 mA h g^?1, and the capacity retention ratio is 94.1% after 50 cycles. Even at the high rate of 5 C, LiNi_1/3Co_1/3Mn_1/3O₂ delivers the high capacity of 112.6 mA h g^?1. These results demonstrate that the electrochemical performance of the regenerated LiNi_1/3Co_1/3Mn_1/3O₂ is comparable to that of a cathode synthesized from fresh materials by carbonate co-precipitation.     

Comportement electrochimique des oxydes mixtes MexCo1 − x Mn2O4 (Me = Ni,Cu; 0,75 ⩾ x ⩾ 0,25)

It is demonstrated through the electrochemical reduction of cobalt manganese spinels that it is possible to increase the cathodic reactivity by replacement of cobalt ions by nickel and copper cations. The reduction reaction occurs on active sites formed by Mn⁴⁺ ions associated, in octahedral sites, with Mn³⁺ ions, for the Ni_xCo_{1 ? x} Mn₂O₄ compounds. For the copper manganites oxides, Cu_xCo_{1 ? x}Mn₂O₄, the electrochemical reaction is likely to occur by the redox on solid state between Mn³⁺ and Cu²⁺ cations.     

Methane combustion over Pd/ZrO2/SiC,Pd/CeO2/SiC,and Pd/Zr0.5Ce0.5O2/SiC catalysts

The performances of different promoters (CeO₂, ZrO₂ and Ce_0.5Zr_0.5O₂ solid solution) modified Pd/SiC catalysts for methane combustion are studied. XRD and XPS results showed that Zr⁴⁺ could be incorporated into the CeO₂ lattice to form Zr_0.5Ce_0.5O₂ solid solution. The catalytic activities of Pd/CeO₂/SiC and Pd/ZrO₂/SiC are lower than that of Pd/Zr_0.5Ce_0.5O₂/SiC. The Pd/Zr_0.5Ce_0.5O₂/SiC catalyst can ignite the reaction at 240 °C and obtain a methane conversion of 100% at 340 °C, and keep 100% methane conversion after 10 reaction cycles. These results indicate that active metallic nanoparticles are well stabilized on the SiC surface while the promoters serve as oxygen reservoir and retain good redox properties.     

Optimal synthesis and new understanding of P2-type Na2/3Mn1/2Fe1/4Co1/4O2 as an advanced cathode material in sodium-ion batteries with improved cycle stability

A sol-gel method with ethylene diamine tetraacetic acid and citric acid as co-chelates is employed for the synthesis of P2-type Na_2/3Mn_1/2Fe_1/4Co_1/4O₂ as cathode material for sodium-ion batteries. Among the various calcination temperatures, the Na_2/3Mn_1/2Fe_1/4Co_1/4O₂ with a pure P2-type phase calcined at 900 °C demonstrates the best cycle capacity, with a first discharge capacity of 157 mA h g^?1 and a capacity retention of 91 mA h g^?1 after 100 cycles. For comparison, the classic P2-type Na_2/3Mn_1/2Fe_1/2O₂ cathode prepared under the same conditions shows a comparable first discharge capacity of 150 mA h g^?1 but poorer cycling stability, with a capacity retention of only 42 mA h g^?1 after 100 cycles. Based on X-ray photoelectron spectroscopy, the introduction of cobalt together with sol-gel synthesis solves the severe capacity decay problem of P2-type Na_2/3Mn_1/2Fe_1/2O₂ by reducing the content of Mn and slowing down the loss of Mn on the surface of the Na_2/3Mn_1/2Fe_1/4Co_1/4O₂, as well as by improving the activity of Fe³⁺ and the stability of Fe⁴⁺ in the electrode. This research is the first to demonstrate the origin of the excellent cycle stability of Na_2/3Mn_1/2Fe_1/4Co_1/4O₂, which may provide a new strategy for the development of electrode materials for use in sodium-ion batteries.     

Morphology effects of Co3O4 on the catalytic activity of Au/Co3O4 catalysts for complete oxidation of trace ethylene

Au/Co₃O₄ catalysts with different morphologies (nanorods, nanopolyhedra and nanocubes) were successfully synthesized and evaluated for ethylene complete oxidation. We found that support morphology has a significant effect on catalytic activity, which is related to the exposed planes of different morphological Co₃O₄. HRTEM revealed the Co₃O₄-nanorods predominantly exposes {110} planes, while the dominant exposed planes of Co₃O₄-nanopolyhedra and -nanocubes are {011} and {001} planes, respectively. Compared with {011} and {001} planes, {110} planes exhibit the maximum amount of oxygen vacancies, which play a major role in ethylene oxidation. Therefore, Au/Co₃O₄-nanorods exhibits extraordinary catalytic activity, yielding 93.7% ethylene conversion at 0 °C.     

Improvement of cycling performance of Li1.1Mn1.9O4 at 60 °C by NiO addition for Li-ion secondary batteries

We report on electrochemical properties of NiO-blended spinel Li_1.1Mn_1.9O₄ at elevated temperature (60 °C). Thus, we employed two kinds of NiO powders, those are, larger particle size (>10 μm) and submicron-sized NiO powders obtained by a ball-milling. These NiO powders were blended to the spinel Li_1.1Mn_1.9O₄ as an additive for fabrication of cathode. The resulting discharge capacity for the larger NiO particle-blended Li_1.1Mn_1.9O₄ had similar electrochemical properties to the bare Li_1.1Mn_1.9O₄. On the other hand, submicron-sized NiO-blended Li_1.1Mn_1.9O₄ brought about slightly increased capacity and excellent capacity retention, maintaining its initial capacity of 99.2% at 25 °C and 94% at 60 °C when Li metal was employed as the anode. In Li-ion cell using graphite as the anode, the capacity retention was of about 80% during cycling at 60 °C, whereas C/Li_1.1Mn_1.9O₄ cell retained around 68% of its initial capacity. Such improved properties would be ascribed to the HF scavenging into the electrolyte by presence of the submicron-sized NiO particles in Li_1.1Mn_1.9O₄ cathode.     

Comparison of structure and electrochemistry of Al- and Fe-doped LiNi1/3Co1/3Mn1/3O2

LiNi_1/3Co_1/3−xM_xMn_1/3O₂ (M = Fe and Al; x = 0, 1/20, 1/9 and 1/6) have been synthesized by firing the co-precipitates of metal hydroxides. The impacts of Fe and Al doping on the structure and electrochemical performances of LiNi_1/3Co_1/3Mn_1/3O₂ are compared by means of powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and galvanostatic charge/discharge test as cathode materials for lithium ion batteries. These materials keep the same layered structure as the LiNi_1/3Co_1/3Mn_1/3O₂ host. It is found that Fe- and Al-doped LiNi_1/3Co_1/3Mn_1/3O₂ show different characteristics in lattice parameter and cycling voltage plateau with increasing dopant dose. More interestingly, low Al doping (x < 1/20) improves the structural stability while Fe doping does not have such effect even at low Fe content.     

Honeycomb supported Co3O4/CeO2 catalyst for CO/CH4 emissions abatement: Effect of low Pd–Pt content on the catalytic activity

A structured Co₃O₄–CeO₂ composite oxide, containing 30% by weight of Co₃O_4, has been prepared over a cordieritic honeycomb support. The bimetallic, Pd–Pt catalyst has been obtained by impregnation of the supported Co₃O₄–CeO₂ with Pd and Pt precursors in order to obtain a total metal loading of 50 g/ft³.CO, CH₄ combined oxidation tests were performed over the catalyzed monoliths in realistic conditions, namely GHSV = 100,000 h⁻¹ and reaction feed close to emission from bi-fuel vehicles. The Pd–Pt un-promoted Co₃O₄–CeO₂ is promising for cold-start application, showing massive CO conversion below 100 °C, in lean condition.A strong enhancement of the CH₄ oxidation activity, between 400 and 600 °C, has been observed by addition to the Co₃O₄–CeO₂ of a low amount of Pd–Pt metals.     

A delithiated LiNi0.65Co0.25Mn0.10O2 electrode material: A structural, magnetic and electrochemical study

A crystalline LiNi_0.65Co_0.25Mn_0.10O₂ electrode material was synthesized by the combustion method at 900 °C for 1 h. Rietveld refinement shows less than 3% of Li/Ni disorder in the structure. Lithium extraction involves only the Ni²⁺/Ni⁴⁺ redox couple while Co³⁺ and Mn⁴⁺ remain electrochemically inactive. No structural transition was detected during cycling in the whole composition range 0 < x < 1.0. Furthermore, the hexagonal cell volume changes by only 3% when all lithium was removed indicating a good mechanical stability of the studied compound. LiNi_0.65Co_0.25Mn_0.10O₂ has a discharge capacity of 150 mAh/g in the voltage range 2.5-4.5 V, but the best electrochemical performance was obtained with an upper cut-off potential of 4.3 V. Magnetic measurements reveal competing antiferromagnetic and ferromagnetic interactions - varying in strength as a function of lithium content - yielding a low temperature magnetically frustrated state. The evolution of the magnetic properties with lithium content confirms the preferential oxidation of Ni ions compared to Co³⁺ and Mn⁴⁺ during the delithiation process.