Cyclic HIV protease inhibitors: design and synthesis of orally bioavailable, pyrazole P2/P2' cyclic ureas with improved potency

Highly potent HIV-1 protease (HIVPR) inhibitors have been designed and synthesized by introducing bidentate hydrogen-bonding oxime and pyrazole groups at the meta-position of the phenyl ring on the P2/P2' substituents of cyclic ureas. Nonsymmetrical cyclic ureas incorporating 3(1H)-pyrazolylbenzyl as P2 and hydrophilic functionalities as P2' show potent protease inhibition and antiviral activities against HIV and have good oral bioavailabilities. The X-ray structure of HIVPR.10A complex confirms that the two pyrazole rings of 10A form bidentate hydrogen bonds with the side-chain oxygen (C=O) and backbone nitrogen (N-H) of Asp30/30' of HIVPR.     

Unsymmetric nonpeptidic HIV protease inhibitors containing anthranilamide as a P2' ligand

A series of novel unsymmetrical anthranilamide-containing HIV protease inhibitors was designed. The structure-activity studies revealed a series of potent P2-P3' inhibitors that incorporate an anthranilamide group at the P2' position. A reduction in molecular weight and lipophilicity is achieved by a judicious choice of P2 ligands (i.e., aromatic, heteroaromatic, carbamate, and peptidic). A systematic investigation led to the 5-thiazolyl carbamate analog 8 m, which exhibited a favorable Cmax/EC50 ratio (> 30), plasma half-life (> 8 h), and potent in vitro antiviral activity (EC50 = 0.2 microM).     

Structure-based design of achiral, nonpeptidic hydroxybenzamide as a novel P2/P2' replacement for the symmetry-based HIV protease inhibitors

A combination of structure-activity studies, kinetic analysis, X-ray crystallographic analysis, and modeling were employed in the design of a novel series of HIV-1 protease (HIV PR) inhibitors. The crystal structure of a complex of HIV PR with SRSS-2,5-bis[N-(tert-butyloxycarbonyl)amino]-3,4-dihydroxy-1, 6-diphenylhexane (1) delineated a crucial water-mediated hydrogen bond between the tert-butyloxy group of the inhibitor and the amide hydrogen of Asp29 of the enzyme. Achiral, nonpeptidic 2-hydroxyphenylacetamide and 3-hydroxybenzamide groups were modeled as novel P2/P2' ligands to replace the crystallographic water molecules and to provide direct interactions with the NH groups of the Asp29/129 residues. Indeed, the symmetry-based inhibitors 7 and 19, possessing 3-hydroxy and 3-aminobenzamide, respectively, as a P2/P2' ligand, were potent inhibitors of HIV PR. The benzamides were superior in potency to the phenylacetamides and have four fewer rotatable bonds. An X-ray crystal structure of the HIV PR/7 complex at 2.1 A resolution revealed an asymmetric mode of binding, in which the 3-hydroxy group of the benzamide ring makes the predicted interaction with the backbone NH of Asp29 on one side of the active site only. An unexpected hydrogen bond with the Gly148 carbonyl group, resulting from rotation of the aromatic ring out of the amide plane, was observed on the other side. The inhibitory potencies of the benzamide compounds were found to be sensitive to the nature and position of substituents on the benzamide ring, and can be rationalized on the basis of the structure of the HIV PR/7 complex. These results partly confirm our initial hypothesis and suggest that optimal inhibitor designs should satisfy a requirement for providing polar interactions with Asp29 NH, and should minimize the conformational entropy loss on binding by reducing the number of freely rotatable bonds in inhibitors.     

HIV protease inhibitory bis-benzamide cyclic ureas: a quantitative structure-activity relationship analysis

A series of N,N'-disubstituted cyclic urea 3-benzamides has been synthesized and evaluated for HIV protease inhibition and antiviral activity. Some of these benzamides have been shown to be potent inhibitors of HIV protease with Ki < 0.050 nM and IC90 < 20 nM for viral replication and, as such, may be useful in the treatment of AIDS. The synthesis and quantitative structure-activity relationship for this benzamide series will be discussed.     

Stereoisomers of cyclic urea HIV-1 protease inhibitors: synthesis and binding affinities

We have synthesized stereoisomers of cyclic urea HIV-1 protease inhibitors to study the effect of varying configurations on binding affinities. Four different synthetic approaches were used to prepare the desired cyclic urea stereoisomers. The original cyclic urea synthesis using amino acid starting materials was used to prepare three isomers. Three additional isomers were prepared by synthetic routes utilizing L-tartaric acid and D-sorbitol as chiral starting materials. A stereoselective hydroxyl inversion of the cyclic urea trans-diol was used to prepare three additional isomers. In all 9 of the 10 possible cyclic urea stereoisomers were prepared, and their binding affinities are described.     

Tricyclic ureas: a new class of HIV-1 protease inhibitors

A new class of tricyclic ureas containing a conformationally constrained proline was designed with the aid of molecular modeling. Efficient stereoselective intermolecular pinacol coupling represented the highlight of the synthesis. These rigid cyclic ureas are active towards HIV-1 protease, with 9 being the most potent compound (Ki = 9 nM) despite interacting with only three side chain binding pockets of HIV protease.     

Comparative molecular field analysis (CoMFA) of a series of symmetrical bis-benzamide cyclic urea derivatives as HIV-1 protease inhibitors

Production of the sex pheromone bombykol in the silkworm, Bombyx mori, is regulated by a neurohormone termed pheromone biosynthesis activating neuropeptide (PBAN). It has been suggested that the external signal of PBAN in this species is transmitted to the intracellular cascade reactions consisting of Ca2+/calmodulin (CaM) complex and phosphoprotein phosphatase. To demonstrate the molecular mechanisms regulated by PBAN, we attempted to characterize CaM in the pheromone gland of B. mori. By using ion-exchange and RP-HPLC, B. mori CaM was purified from the cytosolic fraction of the pheromone gland. The primary structure was deduced by composition/sequence analysis and mass spectrometric analysis of the fragment peptides obtained from enzymatic and chemical fragmentations. The amino acid sequence of B. mori CaM was identical with Drosophila CaM deduced from the CaM gene of D. melanogaster, suggesting that insects have well conserved the molecule of CaM.     

Design and synthesis of novel conformationally restricted HIV protease inhibitors

A set of HIV protease inhibitors represented by compound 2 has previously been described. Structural and conformational analysis of this compound suggested that conformational restriction of the P1/P2 portion of the molecule could lead to a novel set of potent protease inhibitors. Thus, probe compounds 3-7 were designed, synthesized, and found to be potent inhibitors of HIV protease.     

Nonpeptide cyclic cyanoguanidines as HIV-1 protease inhibitors: synthesis, structure-activity relationships, and X-ray crystal structure studies

Comparison of the high-resolution X-ray structures of the native HIV-1 protease and its complexes with the inhibitors suggested that the enzyme flaps are flexible. The movement at the tip of the flaps could be as large as 7 A. On the basis of this observation, cyclic cyanoguanidines have been designed, synthesized, and evaluated as HIV-1 protease (PR) inhibitors. Cyclic cyanoguanidines were found to be very potent inhibitors of HIV-1 protease. The choice of cyclic cyanoguanidines over cyclic guanidines was based on the reduced basicity of the former. X-ray structure studies of the HIV PR complex with cyclic cyanoguanidine demonstrated that in analogy to cyclic urea, cyclic cyanoguanidines also displace the unique structural water molecule. The structure-activity relationship of the cyclic cyanoguanidines is compared with that of the corresponding cyclic urea analogues. The differences in binding constants of the two series of compounds have been rationalized using high-resolution X-ray structure information.     

Molecular recognition of cyclic urea HIV-1 protease inhibitors

As long as the threat of human immunodeficiency virus (HIV) protease drug resistance still exists, there will be a need for more potent antiretroviral agents. We have therefore determined the crystal structures of HIV-1 protease in complex with six cyclic urea inhibitors: XK216, XK263, DMP323, DMP450, XV638, and SD146, in an attempt to identify 1) the key interactions responsible for their high potency and 2) new interactions that might improve their therapeutic benefit. The structures reveal that the preorganized, C2 symmetric scaffolds of the inhibitors are anchored in the active site of the protease by six hydrogen bonds and that their P1 and P2 substituents participate in extensive van der Waals interactions and hydrogen bonds. Because all of our inhibitors possess benzyl groups at P1 and P1', their relative binding affinities are modulated by the extent of their P2 interactions, e.g. XK216, the least potent inhibitor (Ki (inhibition constant) = 4.70 nM), possesses the smallest P2 and the lowest number of P2-S2 interactions; whereas SD146, the most potent inhibitor (Ki = 0.02 nM), contains a benzimidazolylbenzamide at P2 and participates in fourteen hydrogen bonds and approximately 200 van der Waals interactions. This analysis identifies the strongest interactions between the protease and the inhibitors, suggests ways to improve potency by building into the S2 subsite, and reveals how conformational changes and unique features of the viral protease increase the binding affinity of HIV protease inhibitors.     

Potent piperazine hydroxyethylamine HIV protease inhibitors containing novel P3 ligands

The 2-isopropyl thiazolyl group is a highly optimized P3 ligand for C2 symmetry-based HIV protease inhibitors, as exemplified in the drug ritonavir. Here we report that incorporation of this P3 ligand into a piperazine hydroxyethylamine series also yielded novel, highly potent inhibitors. In tissue culture assays, the presence of human serum was less deleterious to the activity of these inhibitors than to that of ritonavir. Furthermore, potent activity against ritonavir resistant HIV was observed.     

Synthesis of novel cyclic urea based HIV-1 protease inhibitors

Over a 3-year period, 663 children aged under 13 years were seen with a history of foreign body (FB) ingestion. Seventy-six per cent of the children were less than 6 years old. Coins and chicken or fish bones were the most common objects ingested. In 27 (4%) children, the FB had been expelled or removed before arrival, and in a further 133 (20%), no FB could be identified. Three patients required emergency airway management. Less than 50% of the children presenting with dysphagia or vomiting had identifiable FBs lodged in the oropharynx or proximal oesophagus, whilst 22% of the children with FBs requiring removal from these sites were asymptomatic. Oesophageal FBs were removed under direct vision (six cases), by rigid oesophagoscopy under general anaesthetic (77 cases), or using a balloon catheter under sedation (26 cases). All 224 FBs detected in the stomach or beyond were allowed to pass naturally, and delayed passage occurred in only one case. Passage of 11 alkaline disc batteries occurred without complication. No patient required surgical removal of an FB.     

Structure based design: novel spirocyclic ethers as nonpeptidal P2-ligands for HIV protease inhibitors

A series of novel spirocyclic ethers were designed to function as nonpeptidal P2-ligands for HIV-1 protease inhibitors. Incorporation of designed ligands in the (R)-(hydroxyethylamino)sulfonamide isostere afforded potent HIV protease inhibitors.     

Structure-based design and synthesis of substituted 2-butanols as nonpeptidic inhibitors of HIV protease: secondary amide series

The design, synthesis, and crystallographic analysis of protein-inhibitor complexes is described for a novel series of nonpeptidic HIV protease (HIV Pr)inhibitors. Beginning with a cocrystal structure of a Phe-Pro peptidomimetic bound to the HIV Pr, design was initiated that resulted in the substituted 2-butanol compound 8 as the lead compound (Ki = 24.5 microM, racemic mixture). Modifications on the initial compound were then made on the basis of its cocrystal structure with HIV Pr and inhibition data, resulting in compounds with enhanced potency against the enzyme (compound 18, Ki = 0.48 microM). These inhibitors were found to bind to the enzyme essentially as predicted on the basis of the original design hypothesis. Stereospecific synthesis of individual enantiomers confirmed the prediction of a binding preference for the S alcohol stereochemistry. Modest antiviral activity was demonstrated for several of the more potent HIV Pr inhibitors in a HIV-1 infected CEM-SS cell line.     

In vitro isolation and identification of human immunodeficiency virus (HIV) variants with reduced sensitivity to C-2 symmetrical inhibitors of HIV type 1 protease

Protease inhibitors are another class of compounds for treatment of human immunodeficiency virus (HIV)-caused disease. The emergence of resistance to the current anti-HIV drugs makes the determination of potential resistance to protease inhibitors imperative. Here we describe the isolation of an HIV type 1 (HIV-1) resistant to an HIV-protease inhibitor. Serial passage of HIV-1 (strain RF) in the presence of the inhibitor, [2-pyridylacetylisoleucylphenylalanyl-psi (CHOH)]2 (P9941), failed to yield a stock of virus with a resistance phenotype. However, variants of the virus with 6- to 8-fold reduced sensitivity to P9941 were selected by using a combination of plaque assay and endpoint titration. Genetic analysis and computer modeling of the variant proteases revealed a single change in the codon for amino acid 82 (Val-->Ala), which resulted in a protease with lower affinity and reduced sensitivity to this inhibitor and certain, but not all, related inhibitors.     

Design, synthesis, and conformational analysis of a novel series of HIV protease inhibitors

A combination of structure-based design and both solution, and solid-phase synthesis were utilized to derive a potent (nM) series of HIV-1 protease inhibitors bearing a structurally novel backbone. Detailed structural analysis of several inhibitors prepared in this series has suggested that rigidification of the P1/P2 region of this class of molecules may result in compounds with improved potency.     

Design, synthesis, and evaluation of tetrahydropyrimidinones as an example of a general approach to nonpeptide HIV protease inhibitors

Re-examination of the design of the cyclic urea class of HIV protease (HIVPR) inhibitors suggests a general approach to designing novel nonpeptide cyclic HIVPR inhibitors. This process involves the inversion of the stereochemical centers of the core transition-state isostere of the linear HIVPR inhibitors and cyclization of the resulting core using an appropriate cyclizing reagent. As an example, this process is applied to the diamino alcohol class of HIVPR inhibitors to give tetrahydropyrimidinones. Conformational analysis of the tetrahydropyrimidinones and modeling of its interaction with the active site of HIVPR suggested modifications which led to very potent inhibitors of HIVPR (24 with a Ki = 0.018 nM). The X-ray crystallographic structure of the complex of 24 with HIVPR confirms the analysis and modeling predictions. The example reported in this study and other examples that are cited indicate that this process may be generally applicable to other linear inhibitors.     

Automated docking and the search for HIV protease inhibitors

This article will discuss the motivations, technologies, and future directions of computational automated docking in the context of the structure-based rational design of HIV-1 protease inhibitors. Docking simulations are widely used for screening of compound libraries to identify new drug leads, employing a simple model for rapid testing of thousands of compounds. Docking simulations are also useful for lead enhancement, using more detailed models to analyze the atomic interactions between inhibitors and target macromolecules. Major advances have been reported in the development of empirical force fields, which now allow assessment of relative binding strength and drug specificity, and extensions of automated docking techniques allow de novo drug design.