Luminescence and energy transfer of Mn co-doped SrSi2O2N2:Eu green-emitting phosphors

Eu²⁺ and Mn²⁺ co-doped SrSi₂O₂N₂ green-phosphors, with promising luminescent properties (examined by their powder diffuse reflection, photoluminescence excitation and emission spectra) suitable for UV converted white LEDs, were produced by high temperature solid-state reaction method. The produced materials exhibited intense broad absorption bands at 220–500 nm and a broad emission band centered at ca. 530 nm, attributed to 4f–5d transitions of Eu²⁺. The emission intensity of Eu²⁺ ions was greatly enhanced by introducing Mn²⁺ ions into SrSi₂O₂N₂:Eu²⁺ due to the energy transfer from Mn²⁺ to Eu²⁺. The energy transfer probability from Mn²⁺ to Eu²⁺ depends strongly on the Mn²⁺ concentration, which is maximized at a Mn²⁺ concentration of 3 mol%. It drastically decreases for higher concentrations. The results indicated that SrSi₂O₂N₂:Eu²⁺, Mn²⁺ is a promising green-emitting phosphor for white-light emitting diodes with near-UV LED chips.     

Novel blue-emitting phosphor NaMg4(PO4)3:Eu, Ce with energy transfer

A blue-emitting phosphor of NaMg₄(PO₄)₃:Eu²⁺, Ce³⁺ was prepared by a combustion-assisted synthesis method. The phase formation was confirmed by X-ray powder diffraction measurement. Photoluminescence excitation spectrum measurements show that the phosphor can be excited by near UV light from 230 to 400 nm and presents a dominant luminescence band centered at 424 nm due to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ions at room temperature. Effective energy transfer occurs in Ce³⁺/Eu²⁺ co-doped NaMg₄(PO₄)₃ due to large spectral overlap between the emission of Ce³⁺ and excitation of Eu²⁺. Co-doping of Ce³⁺ enhances the emission intensity of Eu²⁺ greatly by transferring its excitation energy to Eu²⁺, and Ce³⁺ plays a role as a sensitizer. Ce³⁺-Eu²⁺ co-doped NaMg₄(PO₄)₃ powders can possibly be applied as blue phosphors in the fields of lighting and display.     

Conversion of green emission into white light in Gd2O3 nanophosphors

Gd₂O₃ nanophosphors were prepared by combustion synthesis with and without doping of Dy³⁺ ions. The X-ray powder diffraction patterns indicate that as-prepared Gd₂O₃ and 0.1 mol% Dy₂O₃ doped Gd₂O₃ nanophosphors have monoclinic structures. The transmission electron microscope (TEM) studies revealed that the as-prepared phosphors had an average crystallite sizes around 37 nm. The excitation and emission properties have been investigated for Dy³⁺ doped and undoped Gd₂O₃ nanophosphors. New emission bands were observed in the visible region for Gd₂O₃ nanophosphors without any rare earth ion doping under different excitations. A tentative mechanism for the origin of luminescence from Gd₂O₃ host was discussed. Emission properties also measured for 0.1 mol% Dy³⁺ doped Gd₂O₃ nanophosphors and found the characteristic Dy³⁺ visible emissions at 489 and 580 nm due to ⁴F_9/2 → ⁶H_15/2 and ⁴F_9/2 → ⁶H_13/2 transitions, respectively. The chromaticity coordinates were calculated based on the emission spectra of Dy³⁺ doped and undoped Gd₂O₃ nanophosphors and analyzed with Commission Internationale de l'Eclairage (CIE) chromaticity diagram. These nanophosphors exhibit green color in undoped Gd₂O₃ and white color after adding 0.1 mol% Dy₂O₃ to Gd₂O₃ nanophosphors under UV excitation. These phosphors could be a promising phosphor for applications in flat panel displays.     

Photoluminescence properties of Y2O3:Tb and YBO3:Tb green phosphors synthesized by hydrothermal method

In this work, two Tb³⁺ activated green phosphors: Y₂O₃:Tb³⁺ and YBO₃:Tb³⁺ were prepared by hydrothermal method. Photoluminescence properties of both phosphors were studied in details. Both phosphors exhibit similar luminescent characteristics symbolized by the dominant green emission at 545 nm. Concentration quenching occurs at the Tb³⁺ concentration of 1.60 atomic% and 2.57 atomic% for Y₂O₃:Tb³⁺ and YBO₃:Tb³⁺, respectively. Luminescence decay properties were characterized to better understand the mechanism of concentration quenching. Based on the calculation, the concentration quenching in both phosphors was caused by the dipole–dipole interaction between Tb³⁺ ions.     

Electrical conductivity of 5 mol.% Yb2O3 and 5 mol.% Gd2O3 co-doped Sm2Zr2O7

Sm₂Zr₂O₇ co-doped with and without 5 mol.% Yb₂O₃ and 5 mol.% Gd₂O₃ were prepared by a pressureless-sintering method at 1973 K for 10 h in air. The relative density, structure and electrical conductivity were investigated by the Archimedes method, X-ray diffraction, scanning electron microscopy and impedance spectra measurements. Both Sm₂Zr₂O₇ and (Sm_0.9Gd_0.05Yb_0.05)₂Zr₂O₇ ceramics exhibit a single phase of pyrochlore-type structure. The grain conductivity, grain-boundary conductivity and total conductivity obey the Arrhenius relation, respectively, and gradually increase with increasing temperature from 723 to 1173 K. (Sm_0.9Gd_0.05Yb_0.05)₂Zr₂O₇ ceramic is the oxide-ion conductor in an oxygen partial pressure range of 1.0 × 10⁻⁴ to 1.0 atm at all test temperature levels. The grain conductivity, grain-boundary conductivity and total conductivity of (Sm_0.9Gd_0.05Yb_0.05)₂Zr₂O₇ with dual Yb³⁺ + Gd³⁺ doping are higher than those of undoped Sm₂Zr₂O₇ at identical temperature levels.     

La2O3、Nd2O3、Y2O3对高岭石高温相变动力学的影响

利用综合热分析技术、X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)和扫描电镜(SEM)研究了La_2O_3、Nd_2O_3、Y_2O_3对高岭石高温条件下转变成莫来石过程的作用,并采用Kissinger方程、Ozawa方程以及JMA修正方程(Ⅰ)和(Ⅱ)分析了La_2O_3、Nd_2O_3、Y_2O_3对高岭石高温相变动力学的影响。结果表明:3种稀土氧化物的掺入对高岭石的相变动力学参数产生了影响,相变活化能和频率因子与未掺入稀土氧化物的高岭石相比有所降低,析晶方式则未发生变化,均属于体积晶化。对比掺入3种稀土氧化物的高岭石相变活化能和频率因子可以看出,Y_2O_3对于高岭石高温条件下相变的促进作用最为明显,相变活化能最低。稀土氧化物对于高岭石高温相变产物影响不大,主晶相为莫来石相,次晶相为方石英相,但稀土氧化物的掺入使得方石英相的结晶度明显提高。     

Synthesis and photoluminescent properties of Gd3O4Br:Er phosphors prepared by solid-state reaction method

Pure orthorhombic Gd₃O₄Br:Er³⁺ upconversion phosphors were synthesized by a solid-state reaction method and the structural properties of Gd₃O₄Br:Er³⁺ were investigated by X-ray diffraction; field emission scanning electron microscopy, Raman spectroscopy and Fourier transform infrared spectroscopy. The results show that Gd₃O₄Br has low phonon cutoff energy, indicating that Gd₃O₄Br:Er³⁺may have high luminescent efficiency. Intense green (514–582 nm) and strong red (645–692 nm) upconverted luminescence of Gd₃O₄Br:Er³⁺ were observed under 980 nm laser excitation. The bright green emission is visible to the naked eyes even for 1 mW of the pump power (980 nm) for Gd₃O₄Br:Er³⁺ (0.1%) samples, indicating that Gd₃O₄Br:Er³⁺ may be used as upconversion phosphors.     

White light generation in Al2O3:Ce:Tb:Mn films deposited by ultrasonic spray pyrolysis

Aluminium oxide (Al₂O₃) films doped with CeCl₃, TbCl₃ and MnCl₂ were deposited at 300 °C with the ultrasonic spray pyrolysis technique. The films were analysed using the X-ray diffraction technique and they exhibited a very broad band without any indication of crystallinity, typical of amorphous materials. Sensitization of Tb³⁺ and Mn²⁺ ions by Ce³⁺ ions gives rise to blue, green and red simultaneous emission when the film activated by such ions is excited with UV radiation. The overall efficiency of such energy transfer results to be about 85% upon excitation at 312 nm. Energy transfer from Ce³⁺ to Tb³⁺ ions through an electric dipole-quadrupole interaction mechanism appears to be more probable than the electric dipole-dipole one. A strong white light emission for the Al₂O₃:Ce³⁺(1.3 at.%):Tb³⁺(0.2 at.%):Mn²⁺(0.3 at.%) film under UV excitation is observed. The high efficiency of energy transfer from Ce³⁺ to Tb³⁺ and Mn²⁺ ions, resulting in cold white light emission (x = 0.30 and y = 0.32 chromaticity coordinates) makes the Ce³⁺, Tb³⁺ and Mn²⁺ triply doped Al₂O₃ film an interesting material for the design of efficient UV pumped phosphors for white light generation.     

Tl2Ba2CaCu2O8 thin films on 2 in. LaAlO3(0 0 1) substrates

High quality Tl₂Ba₂CaCu₂O₈ (Tl-2212) superconducting thin films are prepared on both sides of 2 in. LaAlO₃(0 0 1) substrates by off-axis magnetron sputtering and post-annealing process. XRD measurements show that these films possess pure Tl-2212 phase with C-axis perpendicular to the substrate surface. The thickness unhomogeneity of the whole film on the 2 in. wafer is less than 5%. The superconducting transition temperatures T_cs of the films are around 105 K. At zero applied magnetic field, the critical current densities J_cs of the films on both sides of the wafer were measured to be above 2 × 10⁶ A/cm² at 77 K. The microwave surface resistance R_s of film was as low as 350 μΩ at 10 GHz and 77 K. In order to test the suitability of Tl-2212 thin films for passive microwave devices, 3-pole bandpass filters have been fabricated from double-sided Tl-2212 films on LaAlO₃ substrates.     

Photoluminescence properties of RE-activated Na3GdP2O8 (RE = Tb, Dy, Eu, Sm) under VUV excitation

RE³⁺-activated monoclinic Na₃GdP₂O₈ (RE³⁺ = Tb³⁺, Dy³⁺, Eu³⁺, Sm³⁺) phosphors have been synthesized by a solid-state reaction method. Their photoluminescence properties in the vacuum ultraviolet (VUV) region were investigated. By analyzing their excitation spectra, the host-related absorption band was determined to be around 166 nm. The f-d transition bands and the charge transfer bands for Na₃GdP₂O₈:RE³⁺ (RE³⁺ = Tb³⁺, Dy³⁺, Eu³⁺, Sm³⁺) were assigned and corroborated. For the sample Na₃GdP₂O₈:5%Tb³⁺, the strong bands at around 202 and 221 nm are assigned to the 4f-5d spin-allowed transitions and the weak band at 266 nm is related to the spin-forbidden transition of Tb³⁺. For Na₃GdP₂O₈:5%Dy³⁺, the broad band at 176 nm could be related to the f-d transitions of Dy³⁺ and the O²⁻ → Dy³⁺ charge transfer band (CTB) besides the host-related absorption. In the excitation spectrum of Eu³⁺ doped sample, the O²⁻ → Eu³⁺ CTB is observed to be at 245 nm. For the Sm³⁺ doped sample, the O²⁻ → Sm³⁺ CTB is not distinguished obviously and is overlapped with the host-related absorption band.     

Synthesis and luminescent characteristic of Eu-doped (Gd,Lu)2O3 nanopowders

Eu³⁺ doped (Gd,Lu)₂O₃ nanopowders with particle sizes ranging from 20 to 70 nm were synthesized by the co-precipitant method using mixed precipitants, namely the mixture of ammonium hydroxide (NH₃⋅H₂O) and ammonium hydrogen carbonate (NH₄HCO₃). The precipitate precursor prepared by this method was believed to possess a basic carbonate composition and its thermal decomposition of the (Gd,Lu)₂O₃:Eu³⁺ powders were investigated by Thermogravimetric analysis and differential thermal analysis (TG-DTA). This preparation was followed by a calcination process at 800-1100 °C and corresponding phosphor structure were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Photoluminescence measurement of the (Gd,Lu)₂O₃:Eu³⁺ particles show typical red emission at the 612 nm corresponding to the ⁵D₀ → ⁷F₂ transition. We found that the optimal Eu³⁺ molar doping concentration, calcined temperature and reaction time were 7 mol%, 1000 °C, and 2 h, respectively, which is helpful to obtain the final transparent ceramics with excellent properties.     

Electro-deposition of Y2O3:Eu thin film phosphor and its luminescent properties

Y₂O₃:Eu³⁺ red-emitting thin film phosphor was prepared by a two-step process: the cathodical deposition of thin film of yttrium hydroxide and europium hydroxide followed by an annealing process to achieve Eu³⁺ doped Y₂O₃ film. It is found that the atomic content of Eu³⁺ can be well controlled by simply adjusting the volume ratio of Y(NO₃)₃ to Eu(NO₃)₃ solutions. Dependence of the photoluminescence intensity on the atomic content of Eu³⁺ in Y₂O₃ was also studied. The best photoluminescence performance of Y₂O₃:Eu³⁺ thin film phosphor was achieved as atomic content of Eu³⁺ equal to 1.85 at.%.     

Structure and thermal conductivity of Gd2(TixZr1 − x)2O7 ceramics

The Gd₂(Ti_xZr_1 − x)₂O₇ (x = 0, 0.25, 0.50, 0.75, 1.00) ceramics were synthesized by solid state reaction at 1650 °C for 10 h in air. The relative density and structure of Gd₂(Ti_xZr_1 − x)₂O₇ were analyzed by the Archimedes method and X-ray diffraction. The thermal diffusivity of Gd₂(Ti_xZr_1 − x)₂O₇ from room temperature to 1400 °C was measured by a laser-flash method. The Gd₂Zr₂O₇ has a defect fluorite-type structure; however, Gd₂(Ti_xZr_1 − x)₂O₇ (0.25 ≤ x ≤ 1.00) compositions exhibit an ordered pyrochlore-type structure. Gd₂Zr₂O₇ and Gd₂Ti₂O₇ are infinitely soluable. The thermal conductivity of Gd₂(Ti_xZr_1 − x)₂O₇ increases with increasing Ti content under identical temperature conditions. The thermal conductivity of Gd₂(Ti_xZr_1 − x)₂O₇ first decreases gradually with the increase of temperature below 1000 °C and then increases slightly above 1000 °C. The thermal conductivity of Gd₂(Ti_xZr_1 − x)₂O₇ is within the range of 1.33 to 2.86 W m^− 1 K^− 1 from room temperature to 1400 °C.     

Local thermal effect at luminescent spot on upconversion luminescence in Y2O3:Er,Yb nanoparticles

Y₂O₃:Er³⁺,Yb³⁺ nanoparticles were synthesized using Pechini type sol-gel method and then characterized by XRD, TEM, SEM, Raman spectroscopy, and fluorescence spectrophotometer. Local temperature effect on upconversion luminescence intensities was theoretically analyzed and experimentally tested. These results indicate that a competition process between local temperature at luminescent spot and laser pump power density decides the development trend of upconversion luminescence intensity. Therefore, it can be concluded that the most intensive upconversion luminescence in Y₂O₃:Er³⁺,Yb³⁺ nanoparticles can be achieved at a certain pump power density, which should be slightly below a given constant value (the corresponding threshold of temperature).     

Diode-end-pumped passively Q-switched 1.34 μm Nd:Gd0.5Y0.5VO4 laser with Co:LMA saturable absorber

In this paper, the output performances at 1.34 μm in continuous wave operation and passive Q-switching regime of a diode-end-pumped Nd:Gd_0.5Y_0.5VO₄ laser have been investigated. The passive Q-switching regime was achieved with Co²⁺:LaMgAl₁₁O₁₉ (Co²⁺:LMA) saturable absorbers crystals. A maximum average output power of 230 mW was recorded with a Co²⁺:LMA with initial transmission of 81%. The minimum pulse duration was 116 ns, which corresponded to a repetition rate of 360 kHz, the single pulse energy of 2.1 μJ and the pulse peak power of 5.5 W.     

Hydrothermal synthesis, structure and scintillation characterization of nanocrystalline Eu-doped Gd2O3 materials and its X-ray imaging applications

Nanocrystalline Gd₂O₃:Eu scintillators were successfully synthesized using a hydrothermal method and subsequent calcination treatment in the electrical furnace as an X-ray to visible light conversion material for an indirect X-ray image sensor. In this work, various Gd₂O₃:Eu scintillators were prepared in accordance with different synthesis conditions such as doped-Eu concentration, different calcination temperatures of 600-1400 °C and calcination time of 1-10 h. The transition of morphology from nanorods to particles was observed as the calcination temperature of Gd₂O₃:Eu scintillator increased. And the phase transformation of the sample from cubic to monoclinic structure was discovered at 1300 °C calcination temperature. In addition, scintillation properties such as luminescent spectra and light intensity under 266 nm UV illumination were measured as a function of calcination condition of as-synthesized Gd₂O₃:Eu powder. The nanocrystalline Gd₂O₃:Eu scintillator with a strong red light emission at near 611 nm wavelength under photo- and X-ray excitation will be employed for its potential X-ray image sensor applications in the future.     

Behaviour of the EuD0 → F0 transition in CaMoO4 powellite type ceramics under Ar and Pb ions implantation

In this work, the Eu³⁺⁵D₀ → ⁷F₀ transition is used as a structural probe to follow the Eu³⁺ environment modification in powellite CaMoO₄ under irradiation or when its composition is varying. Six ceramics with compositions ranging from Ca_0.99Eu_0.01MoO₄ to Ca_0.76Sr_0.1Na_0.07 Eu_0.01La_0.02Nd_0.02Pr_0.02 MoO₄ were synthesized and each composition has a specific Eu³⁺ luminescence signal. The ⁵D₀ → ⁷F₀ transition appeared to be a very sensitive structural probe. Even if there is only one structural site in powellite for europium, the Eu³⁺⁵D₀ level position changes with the modification of the Eu³⁺ cationic neighbours. Low ⁵D₀ values are observed for environments containing trivalent rare earth elements when high ⁵D₀ values are observed for Na⁺ rich environments. Under 8 MeV Ar ions irradiation, the Eu³⁺⁵D₀ → ⁷F₀ transition is not really affected. Under 108 MeV Pb ions irradiation there is an homogenization of the Eu³⁺⁵D₀ → ⁷F₀ transition from the different irradiated samples revealing a reorganization of the crystalline structure.     

Preparation of SrAl2O4: Eu, Dy nanometer phosphors by detonation method

SrAl₂O₄: Eu²⁺, Dy³⁺ nanometer phosphors were synthesized by detonation method. The particle morphology and optical properties of detonation soot that was heated at different temperatures (600–1100 °C) had been studied systematically by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results indicated SrAl₂O₄: Eu²⁺, Dy³⁺ nanometer powders in monoclinic system (a = 8.442, b = 8.822, c = 5.160, β = 93.415) can be synthesized by detonation method, when detonation soot was heated at 600–800 °C. The particle size of SrAl₂O₄: Eu²⁺, Dy³⁺ is 35 ± 15 nm. Compared with the solid-state reaction and sol-gel method, synthesis temperature of the detonation method is lower about 500 and 200 °C respectively. After being excited under UN lights, detonation soot and that heated at 600–1100 °C can emit a green light.     

Structural transition induced by the release of residual stress in the complex of cubic and monoclinic Gd2O3:Eu nanoparticles

The Photoluminescence (PL) spectra of Gd₂O₃:Eu composed of cubic and monoclinic structure were collected on November 2003 and June 2006, respectively. The results show that a portion of cubic Gd₂O₃ transforms into monoclinic after the sample was left as it is for two years; and the ⁵D₁-⁷F_J emission of Eu³⁺ in cubic host was enhanced in this released complex. Considering the high pressure behavior of Gd₂O₃, we think this structural transition is due to the sample that endures a process of press and release while the residual stress is released slowly.     

Enhanced red emission in ZnB2O4:Eu by charge compensation

Eu³⁺ doped ZnB₂O₄ without or with different charge compensation (CC) approaches (co-doping Li⁺, Na⁺, K, decreasing the content of Zn²⁺) were prepared by solid state reactions. The phosphors can strongly absorb 393 nm ultraviolet (UV) light which is coupled well with the emission of currently used InGaN-based near UV light emitting diodes (LEDs) and emit red light with a good color purity. The luminescent intensity of phosphors can be remarkably enhanced with any of CC methods. However, the shape and position of excitation and emission spectra keep unchanged. The introduction of Li⁺ can enhance the red emission intensity of Eu³⁺ by ∼4 times with the optimal effect. Red emission of Eu³⁺ can also be enhanced with the other three CC approaches but the effects are not as good as Li⁺ because the volume unbalance in Li⁺ compensation approach is the smallest while net positive charge was offset. The results of this work suggest that volume compensation and equilibrium of mole number should also be taken into account when a CC approaches is selected.