二维离散小波变换的VLSI实现

小波变换图像编码获得了比传统DCT变换编码更好的图像质量和更高的压缩比,然而,实时二维小波变换需要大量运算,因此,专用小波变换芯片的设计已成为小波图像编码中的关键技术,文章提出了一种高速的二维小波变换的VLSI结构。根据模块化的设计思想,设计出一组二维小波变换的基本模块。通过将这些模块按变换要求适当组装,完成了多级二维小波变换,编写了相应的VerilogHDL模型,并进行了仿真和逻辑综合。     

JPEG2000小波变换器的VLSI结构设计

新一代静止图像压缩标准JPEG2000将离散小波变换(DWT)作为其核心变换技术,并推荐采用推举体制(lifting)快速算法来实现.空间组合推举体制算法(SCLA)大大降低了lifting的运算量.当选用9/7小波滤波器时,SCLA的乘法运算量只有lifting的7/12.本文提出了一种实现SCLA算法的VLSI结构,降低了基于lifting实现的运算量, 加快了变换的速度,减小了电路的规模.本文的二维正反小波变换器已经作为单独的IP核应用于我们目前正在开发的JPEG2000图像编解码芯片中.     

小波图像编码的VLSI实现

设计了一种模块化的二维离散小波变换(2-D DWT)的VLSI结构.该结构可以实时完成小波变换,且很容易扩展.针对零树编码硬件实现方面的不足,利用一种简单的顺序扫描方式和两个标志阵列,设计了一种适合硬件实现的快速零树编码算法(FZIC)和FZIC硬件实现的VLSI结构,编写了2-D DWT和FZIC硬件结构的Veri log HDL模型,并进行了仿真和逻辑综合.结合2-D DWT和FZIC,实现了小波图像编码系统 ,并用ALTERA CPLD成功进行了验证.     

一种快速高效的二维一级小波变换的硬件实现

提出了一种针对9/7小波滤波器的二维一级小波变换的硬件平台,整体结构采用流水方式实现,数据分组输入,列变换采用多个小波变换单元,行变换模块为可重构硬件结构,行列变换之间不需要片上存储器。与已有结构相比,该结构可以通过更少的硬件资源消耗获得更高的处理速度。     

一种高性能9/7离散小波变换滤波器的硬件设计

基于提升格式的离散小波变换比传统的基于卷积的运算量少,易于VLSI实现。本文提出了一种基于提升格式,高效实时实现JPEG2000中9/7双正交离散小波变换滤波器的VLSI结构设计方法。该方法所设计的结构,在保证同样的精度下,减少了运算量,整体运算速度高,硬件花费少,存储需求低,硬件利用率达到100%。本文用Verilog HDL对系统进行硬件描述,并选用Xilinx公司的XCV50e-cs144-8器件在ISE4.1环境下实现了综合。     

VLSI implementation of discrete wavelet transform

This paper presents a VLSI implementation of discrete wavelet transform (DWT). The architecture is simple, modular, and cascadable for computation of one or multidimensional DWT. It comprises of four basic units: input delay, filter, register bank, and control unit. The proposed architecture is systolic in nature and performs both high- and low-pass coefficient calculations with only one set of multipliers. In addition, it requires a small on-chip interface circuitry for interconnection to a standard communication bus. A detailed analysis of the effect of finite precision of data and wavelet filter coefficients on the accuracy of the DWT coefficients is presented. The architecture has been simulated in VLSI and has a hardware utilization efficiency of 87.5%. Being systolic in nature, the architecture can compute DWT at a data rate of N×10⁶ samples/s corresponding to a clock speed of N MHz     

离散小波变换的VLSI实现

离散小波变换已广泛应用于信号处理中。然而,实时小波变换需要大量运算,因此,专用小波变换芯片的设计已成为信号处理中的关键技术。文章提出了一种小波变换递归金字塔算法的VLSI结构,采用一组输入延迟单元和一个控制单元,用一组并行滤波器完成了小波变换。编写了相应的Verilog HDL模块,并进行了仿真和逻辑综合。     

一种高效的三维DWT VLSI结构设计方法

文中通过深入研究三维离散小波变换(3D DWT)核心算法并根据序列图像编码的特点,设计并实现了一种适合硬件实现的高效的三维小波变换VLSI结构。编写了相应verilog模型,并进行了仿真和逻辑综合。仿真结果表明行列滤波并行处理并采用流水线设计方法,加快了运算速度,有效降低了片内存储容量。     

An Efficient VLSI Architecture for the Computation of 1-D Discrete Wavelet Transform

This paper presents a new architecture for VLSI implementation of the one dimensional Discrete Wavelet Transform (DWT). The architecture uses single filter for generation of both the DWT coefficients and scaling function for orthogonal wavelets as opposed to the conventional two filter approach. For multilevel decomposition, the fold back architecture principle, which interleaves the decimated scaling function back into the filter for subsequent levels, is applied. Limited use of memory in the design enables efficient implementation of the DWT computation in VLSI.     

一种基于提升的二维离散小波变换VLSI架构

离散小波变换(Discrete Wavelet Transform,DWT)需要较多的运算量以及较大的存储器空间,为了使之适用于实时的图像处理应用,就需要开发特殊的架构和芯片来提高离散小波变换的运算性能。基于提升的二维DWT提出了一种新型的VLSI结构——LLSP架构,其结合逐级和基于行的架构这两者特点,带来了硬件开销和存储器空间的降低,并可以用于多提升步骤的扩展以及多级二维离散小波变换。     

小波图像编码的VLSI实现

设计了一种模块化的二维离散小波变换(2-D DWT)的VLSI结构.该结构可以实时完成小波变换,且很容易扩展.针对零树编码硬件实现方面的不足,利用一种简单的顺序扫描方式和两个标志阵列,设计了一种适合硬件实现的快速零树编码算法(FZIC)和FZIC硬件实现的VLSI结构,编写了2-D DWT和FZIC硬件结构的Veri log HDL模型,并进行了仿真和逻辑综合.结合2-D DWT和FZIC,实现了小波图像编码系统 ,并用ALTERA CPLD成功进行了验证.     

Efficient realizations of the discrete and continuous wavelettransforms: from single chip implementations to mappings on SIMD arraycomputers

This paper presents a wide range of algorithms and architectures for computing the 1D and 2D discrete wavelet transform (DWT) and the 1D and 2D continuous wavelet transform (CWT). The algorithms and architectures presented are independent of the size and nature of the wavelet function. New on-line algorithms are proposed for the DWT and the CWT that require significantly small storage. The proposed systolic array and the parallel filter architectures implement these on-line algorithms and are optimal both with respect to area and time (under the word-serial model). Moreover, these architectures are very regular and support single chip implementations in VLSI. The proposed SIMD architectures implement the existing pyramid and a'trous algorithms and are optimal with respect to time     

A Programmable Parallel VLSI Architecture for 2-D Discrete Wavelet Transform

Many VLSI architectures for computing the discrete wavelet transform (DWT) were presented, but the parallel input data sequence and the programmability of the 2-D DWT were rarely mentioned. In this paper, we present a parallel-processing VLSI architecture to compute the programmable 2-D DWT, including various wavelet filter lengths and various wavelet transform levels. The proposed architecture is very regular and easy for extension. To eliminate high frequency components, the pixel values outside the boundary of the image are mirror-extended as the symmetric wavelet transform (SWT) and the mirror-extension is realized via the routing network. Owing to the property of the parallel processing, we adopt the row-based recursive pyramid algorithm (RPA), similar to 1-D RPA, as the data scheduling. This design has been implemented and fabricated in a 0.35 m 1P4M CMOS technology and the working frequency is 50 MHz. The chip size is about 5200 m × 2500 m. For a 256 × 256 image, the chip can perform 30 frames per second with the filter length varying from 2 to 20 and with various levels. The proposed architecture is suitable for real-time applications such as JPEG 2000.     

A Vlsi Architecture for Separable 2-D Discrete Wavelet Transform

In this paper, an efficient semi-systolic array architecture for separable 2-D Discrete Wavelet Transform (DWT) is introduced. The semi-systolic array is applicable to any convolution that requires an arbitrary subsampling function. The semi-systolic array presents a better implementation of the convolution function of DWT. This kind of implementation offers a higher efficiency compared to regular systolic implementation when applied for 2-D DWT. The architecture has an efficiency of at least 91% which increases proportional to the number of octaves with no change in the architecture design except for minor modifications to the control logic and memory size. The propose architecture is scalable for different size of filter and different number of octave. The communication routing is minimum since data transfers are limited to immediate neighboring processors. The components of the architecture are fairly regular and consist of minimum number of computational units which makes it a good candidate for VLSI implementation.     

A Parallel-Based Lifting Algorithm and VLSI architecture for DWT

A novel Parallel-Based Lifting Algorithm （PBLA） for Discrete Wavelet Transform （DWT）, exploiting the parallelism of arithmetic operations in all lifting steps, is proposed in this paper. It leads to reduce the critical path latency of computation, and to reduce the complexity of hardware implementation as well. The detailed derivation on the proposed algorithm, as well as the resulting Very Large Scale Integration （VLSI） architecture, is introduced, taking the 9/7 DWT as an example but without loss of generality. In comparison with the Conventional Lifting Algorithm Based Implementation （CLABI）, the critical path latency of the proposed architecture is reduced by more than half from （4Tm ＋ 8Ta）to Tm ＋ 4Ta, and is competitive to that of Convolution-Based Implementation （CBI）, but the new implementation will save significantly in hardware. The experimental results demonstrate that the proposed architecture has good performance in both increasing working frequency and reducing area.     

JPEG2000并行阵列式小波滤波器的VLSI结构设计

提出一种基于提升算法实现JPEG2000编码系统中的二维离散小波变换(Discrete Wavelet Transform)的并行阵列式的VLSI结构设计方法.利用该方法所得结构由两个行处理器,一个列处理器以及少量行缓存组成;行列处理器内部是由并行阵列式的处理单元组成;能使行和列滤波器同时进行滤波,用优化的移位加操作替代乘法操作.整个结构采用流水线的设计方法处理,在保证同样的精度下,大大减少了运算量和提高了硬件资源利用率,几乎达到100％,加快了变换速度,也减少了电路的规模.该结构对于N×N大小的图像,处理速度达到O(N²/2)个时钟周期.二维离散小波滤波器结构已经过FPGA验证,并可作为单独的IP核应用于正在开发的JPEG2000图像编解码芯片中.     

二维离散5/3小波变换并行VLSI结构设计

提出了一种基于提升算法的二维离散5/3小波变换(DWT)高效并行VLSI结构设计方法。该方法使得行和列滤波器同时进行滤波,采用流水线设计方法处理,在保证同样的精度下,大大减少了运算量,提高了变换速度,节约了硬件资源。该方法已通过了VerilogHDL行为级仿真验证,可作为单独的IP核应用在JPEG2000图像编、解码芯片中。该结构可推广到9/7小波提升结构。     

应用于JPEG2000的5/3提升小波的VLSI结构设计

提出一种基于提升算法（lifting scheme）实现JPEG2000编码系统中的二维离散小波变换（Discrete Wavelet Transform）的并行阵列式的VLSI结构设计方法.该结构由一个行处理器和一个列处理器组成,行、列处理器通过时分复用同时进行滤波,用优化的移位加操作替代乘法操作,采用嵌入式数据延拓算法处理边界延拓.整个结构采用流水线设计方法,减少了运算量,提高了硬件资源利用率,该结构可应用于JPEG2000图像编码芯片中.     

一种无乘法高性能9/7离散小波变换滤波器的硬件设计

提出了一种基于提升格式,高效、实时实现JPEG2000中9／7双正交离散小波变换虑波器的VLSI结构设计方法。该方法所设计的结构,在保证同样的精度下,大大减少了运算量,整体运算速度高,硬件花费少,存储需求低,硬件利用率达到100％。用Verilog HDL对系统进行了硬件描述,并选用Xilinx公司的xcv50e-cs144-8器件在ISE4．1环境下实现了综合。     

FPGA implementation for 2D discrete wavelet transform

An operator correlation-based algorithm and its VLSI architecture For computing the 2D discrete wavelet transform is presented. The proposed discrete wavelet transform architecture was simulated in Verilog and synthesised with the FPGA compiler. The implementation for the 2D discrete wavelet transform on an FPGA-based design style is described