共查询到20条相似文献,搜索用时 687 毫秒
1.
2.
3.
4.
5.
辐射交联热收缩制品制造技术 总被引:3,自引:0,他引:3
介绍了辐射交联热收缩制品制造技术,对热收缩制品生产过程中的3个关键工序(挤出成型、辐射交联、扩张成型)的影响或决定产品质量的技术问题进行了初步阐述。 相似文献
6.
本文简述了磁性热收缩套管常用的几种磁粉,介绍了在制备磁性热收缩套管时选用磁粉的要求及影响磁粉性能的因素,并给出了高频变换器中所用磁性热收缩套管用磁粉的选择建议。 相似文献
7.
由广州凯恒科塑有限公司申请的专利(专利号CN100387646,公开日期2007-01—17)“一种辐照交联阻燃热收缩标识套管及其制备方法”,涉及的阻燃热收缩标识套管以乙烯-醋酸乙烯酯共聚物、乙烯-丙烯酸乙酯共聚物、EPR、阻燃剂十溴二苯乙烷、三氧化二锑、表面活化处理过的超细氢氧化镁及其它助剂为原料,经混炼造粒、挤出成型、辐照交联、扩张定型、整平处理等工序制得。 相似文献
8.
9.
10.
11.
12.
Results of design and construction developments focused on the problem of centering of a core in the cavity of a gypsum mold,
the production of ceramic blanks with thickness variability and specified shape, and ways of increasing the uniformity of
articles in molding of large sheathing for antenna radomes by means of aqueous slurry casting are presented. 相似文献
13.
球头螺母成型工艺的改进及优化 总被引:2,自引:1,他引:1
用聚酰胺66(PA66)制作了球头螺母为解决产品装配时出现的断裂纹和变软问题,对球头螺母注塑工艺提出一些改进要点,对材料干燥、色母料、模具、调湿、检测作出了相应调整.工艺改进及优化后,解决了产品裂纹和变软问题,稳定了产品质量,得到了用户的认同. 相似文献
14.
The possibility of using a small VIMS-1 device for measuring the electrophysical properties of abrasive molding pastes made of micropowders in developing formulas for an abrasive tool and for controlling the quality of the pastes in production conditions was examined. It was shown that introduction of control of the electrophysical properties of molding pastes is a real possibility for obtaining molding pastes of stable quality. 相似文献
15.
16.
针对碳纤维增强复合材料在电动汽车车身上的应用,分别采用手糊、真空袋压和模压三种成型工艺,设计制备了碳纤维增强复合材料层合板和双帽形管件两种实验样件。对样件进行了单向拉伸和三点弯曲试验,对构件的力学性能、表面质量、微观结构和破坏形式进行了比较,并分析了不同工艺性能存在差异的原因。研究表明:采用模压工艺成型的复合材料结构件气泡少,孔隙率小,表面质量最好;模压成型的层合板拉伸强度比手糊成型的提高了14.39%,管件弯曲强度比手糊成型管件提高了一倍,比真空袋压成型管件提高了47.58%。研究证实模压成型相对于手糊和真空袋压工艺,产品具有较优良的力学性能和一致性,较适合于电动汽车等轻量化结构的成型。 相似文献
17.
介绍了一种格栅形碳纤维复合材料锥筒制件的成型工艺技术。纤维采用日本东丽公司的M40,基体为648酚醛环氧树脂一三氟化硼单乙胺体系(4211体系),采用铸铝模具、真空袋热压罐成型工艺。通过工艺研究,突破了模具设计与制造、铺层设计、制件外观质量保证、制件尺寸精度控制、成型工艺等关键技术,成型的制件格栅条宽度和厚度均匀,外表光洁,尺寸精度高,满足了设计要求。 相似文献
18.
Achintya Kumar Sen Bibha Mukherjee A. S. Bhattacharya L. K. Sanghi P. P. De Anil K. Bhowmick 《应用聚合物科学杂志》1991,43(9):1673-1684
An attempt is made to develop a novel series of cable sheathing compounds with variation in chlorine content and sufficient fire retardance and unique low-smoke characteristics. These are prepared by blending PVC and functionalized polyolefins in different compositions. PE and EPDM have been functionalized by grafting dibutyl maleate (DBM) using DCP as initiator. FRLS compounds made from PVC-functionalized polyolefin blends possess the special characteristics of low-smoke, low-acid-gas generation, increased fire retardance, and improved volume resistivity, which are much better in comparison with a typical PVC sheathing compound. Thermoplastic elastomer (TPE) based nonhalogen FRLS compounds are also reported. The mechanisms for grafting, polymer-polymer and polymer-filler interactions have been presented. 相似文献
19.
T. A. M. M. Maas 《Polymer Engineering and Science》1978,18(1):29-32
The curing reaction of thermosetting polymers is accompanied by exothermal heat which has been measured with a differential scanning calorimeter. The Perkin-Elmer DSC-1 B was used for recording the curing behavior of a diallyl phthalate molding compound and two unsaturated polyester molding compounds. The residual heat of reaction has also been determined by a dynamic DSC scan of partly cured products made at various mold temperatures and curing times. It was thus possible to calculate the degree of curing and to dictate the optimum processing conditions for the indicated molding compounds. The interpretation of results leads to the conclusions that the DSC can be used to set specifications and to perform quality control for the molding compounds and that the most significant processing parameter is mold temperature. 相似文献
20.
以缩短产品生产周期,降低成本及提高产品质量为目的,利用moldflow/MPI对相机外壳成型过程进行了模拟分:析。根据模拟分析得到熔接痕、流动前沿温度、体积收缩率和翘曲等结果,优化浇口设计及成型方案。分析结果对塑件注射成型应用具有指导作用。 相似文献