共查询到19条相似文献,搜索用时 140 毫秒
1.
李跃武 《CAD/CAM与制造业信息化》2005,(3)
在机械传动中,螺纹的应用十分广泛,尤其是在数控设备上更是大量使用滚珠丝杠.对这些螺纹零件,采用CAD/CAM技术进行设计与制造是离不开仿真技术的,本文主要介绍的是基于AutoCAD平台,利用VLISP编程,根据螺纹加工原理、三维实体造型和对象布尔运算等实现螺纹加工三维动态仿真技术.…… 相似文献
2.
李跃武 《CAD/CAM与制造业信息化》2005,(Z1)
在机械传动中,螺纹的应用十分广泛,尤其是在数控设备上更是大量使用滚珠丝杠。对这些螺纹零件,采用CAD/CAM技术进行设计与制造是离不开仿真技术的,本文主要介绍的是基于AutoCAD平台,利用VLISP编程,根据螺纹加工原理、三维实体造型和对象布尔运算等实现螺纹加工三维动态仿真技术。 相似文献
3.
基于AutoCAD的螺纹加工三维仿真 总被引:1,自引:0,他引:1
李跃武 《CAD/CAM与制造业信息化》2005,(2):125-126
在机械传动中,螺纹的应用十分广泛,尤其是在数控设备上更是大量使用滚珠丝杠.对这些螺纹零件,采用CAD/CAM技术进行设计与制造是离不开仿真技术的,本文主要介绍的是基于AutoCAD平台,利用VLISP编程,根据螺纹加工原理、三维实体造型和对象布尔运算等实现螺纹加工三维动态仿真技术. 相似文献
4.
本文主要研究了标准螺纹连接件的三维建模系统的开发.它是基于Pro/Engineer软件平台,采用其三维参数化特征建模技术,应用其二次开发包Pro/TOOLKIT,结合Visual C++6.0设计并开发了一套三维螺纹标准件库系统,从而实现了各种螺纹连接标准件的自动生成,其中包括:螺栓,螺柱,螺钉,螺母,垫圈. 相似文献
5.
人工测量医药罐体瓶口螺纹尺寸的精度与重复性较差,使用三坐标机虽能提高精度但检测速度慢,针对以上缺点,本文设计了基于点激光和视觉引导的瓶口螺纹测量系统。该系统能实现罐体的夹取、视觉引导定位以及瓶口螺纹的高精度测量。首先,针对上料位置的动态变化,使用机器视觉算法完成罐体的精确定位;其次,针对螺纹尺寸测量的高精度要求,使用激光测距传感器完成螺纹轮廓的数据采集;最后,针对螺纹的复杂外形,使用最小二乘法拟合螺纹轮廓,分别计算螺纹相关尺寸。试验结果表明,该系统能够准确地测量出不同规格的瓶口螺纹尺寸,绝对精度、重复精度分别能够达到0.01mm和0.003mm,基本满足医药罐体瓶口螺纹的测量要求,在实际生产中具有良好的可行性。 相似文献
6.
7.
吴惠文 《CAD/CAM与制造业信息化》2015,(6):45-48
本文主要介绍运用FANUC系统的加工中心来完成美制60° NPT11/1的内锥管螺纹零件的加工。根据内锥管螺纹的特点与应用场合,结合在FANUC系统加工中心的优势,运用宏程序的转移与循环的语句结合实际加工要求,然后用单刃螺纹铣刀来实现对内锥管螺纹铣削,精确高效地完成了零件的要求。 相似文献
8.
在三轴联动数控机床上加工螺纹的编程方法 总被引:1,自引:0,他引:1
万国银 《CAD/CAM与制造业信息化》2008,(9)
螺纹在日常生活中应用极为广泛,我国的螺纹标准按用途分为紧固螺纹、传动螺纹、管螺纹和专用螺纹四大类.传统的螺纹加工方式,常见的要么采用丝锥或板牙手工完成,要么在车床上采用螺纹车刀车削完成.这些加工方式非常普及,且加工效率极高,但往往局限于轴类及回转体零件. 相似文献
9.
三维形体的计算机造型是计算机图形学的一个重要研究领域。三维螺纹是在科学技术和工程领域应用很广泛的一种较为复杂的形体。正因为其复杂,所以它在计算机上建模比较困难。本文具体地分析了螺旋线的形成过程、原理和螺旋线的数学模型以及螺纹车削成形的整个过程,在此基础上,建立了三维螺纹的一种计算机建模方法。从该方法的应用实践来看,本文提出的方法是成功的,效率也很高,具有较强的实用价值和良好的推广应用前景。 相似文献
10.
针对钢管螺纹缺陷的识别,提出了采用交变漏磁法进行判别。应用有限元法对钢管螺纹缺陷的漏磁场进行仿真,使带偶极子模型的近似解析解得到弥补。根据有限元建模理论建立了模型,仿真得到有无缺陷两种情况下的螺纹结构的磁场分布,提出了螺纹缺陷的识别方法:对漏磁场分析主要采用的是漏磁场的水平分量Bx,整个无缺陷螺纹结构整体为一宽裂纹,伴有一系列表征螺纹结构的有规律的小脉冲,当有缺陷出现时,有规律分布的小脉冲就会被破坏掉,对比有无缺陷仿真结果可完成对缺陷的识别,仿真结果与实际情况相符。本研究结果为实验设计提供了有力依据。 相似文献
11.
12.
13.
This study develops a thread-based microfluidic device with variable volume injection capability and 3-dimensional (3D) detection electrodes for capillary electrophoresis electrochemical (CE–EC) detection of blood urea nitrogen (BUN) in whole blood. A poly methyl methacrylate (PMMA) substrate with concave 3D electrodes produced by the hot embossing method is used to enhance the sensing performance of the CE–EC system. Results show that the chip with 3D sensing electrodes exhibits a measured current response nine times higher and signal-to-noise ratio five times higher when compared to the peak responses obtained using a chip with conventional 2D sensing electrodes. In addition, the developed thread-based microfluidic system is capable of injecting variable sample volumes into the separation thread simply by wrapping the injection thread different numbers of times around the separation thread. The peak S/N ratio can be further enhanced with this simple approach. Results also indicate that the CE–EC system exhibits good linear dynamic range for detecting a urea sample in concentrations from 0.1 to 10.0 mM (R 2 = 0.9848), which is suitable for adoption in detecting the BUN concentration in human blood (1.78–7.12 mM). Separation and detection of the ammonia ions converted from BUN in whole blood is successfully demonstrated in the present study, with the developed thread-based microfluidic system providing a low-cost, high-performance method for detecting BUN in human blood. 相似文献
14.
讨论了可用于网络研究和学习的分布式协同虚拟实验室技术,提出了该技术的HLA/Java 3D构建方案.将实验系统定义为一个联邦,实验目标由联邦成员协同完成.联邦成员由4个线程组成,其中Applet线程和远程更新线程负责虚拟实验室图形渲染,联邦成员主线程和RTI回调线程实现协同控制.该系统完成了该4个线程的设计,并用队列和阻塞实例实现了线程之间的协调,解决了RTI重入问题.实验结果表明该方案是可行的. 相似文献
15.
16.
面向线程级前瞻的线程划分方法浅析 总被引:1,自引:0,他引:1
正确合理的线程划分方法是提取线程级并行性的必要前提,线程级前瞻技术是简化线程划分复杂度提高系统性能的重要手段。本文讨论了几种支持线程级前瞻的典型线程划分方法,在此基础上提出了线程级划分需要解决的关键问题,并蛄合一典型自动线程划分算法进行了具体分析,提出了线程划分需要进一步研究的问题。 相似文献
17.
We propose a novel 3D tracking method that supports several hundreds of pre-trained potential planar targets without losing real-time performance. This goes well beyond the state-of-the-art, and to reach this level of performances, two threads run in parallel: the foreground thread tracks feature points from frame-to-frame to ensure real-time performances, while a background thread aims at recognizing the visible targets and estimating their poses. The latter relies on a coarse-to-fine approach: assuming that one target is visible at a time, which is reasonable for digilog books applications, it first recognizes the visible target with an image retrieval algorithm, then matches feature points between the target and the input image to estimate the target pose. This background thread is more demanding than the foreground one, and is therefore several times slower. We therefore propose a simple but effective mechanism for the background thread to communicate its results to the foreground thread without lag. Our implementation runs at more than 125 frames per second, with 314 potential planar targets. Its applicability is demonstrated with an Augmented Reality book application. 相似文献
18.
Threading fundamental matrices 总被引:3,自引:0,他引:3
Avidan S. Shashua A. 《IEEE transactions on pattern analysis and machine intelligence》2001,23(1):73-77
We present a new function that operates on fundamental matrices across a sequence of views. The operation, we call “threading”, connects two consecutive fundamental matrices using the trifocal tensor as the connecting thread. The threading operation guarantees that consecutive camera matrices are consistent with a unique 3D model, without ever recovering a 3D model. Applications include recovery of camera ego-motion from a sequence of views, image stabilization across a sequence, and multi-view image based rendering 相似文献
19.
利用遗传算法求解线程分配问题 总被引:2,自引:0,他引:2
文章讨论了软件实现的多线程DSM系统中的线程分配问题,提出了一种新颖的基于遗传算法的动态分配方法,试算结果表明,该方法收敛稳定,求解性能良好. 相似文献