Performance limitations of a free-space optical communication satellite network owing to vibrations: heterodyne detection

Free-space optical communication between satellites in a distributed network can permit high data rates of communication between different places on Earth. To establish optical communication between any two satellites requires that the line of sight of their optics be aligned during the entire communication time. Because of the large distance between the satellites and the alignment accuracy required, the pointing from one satellite to another is complicated because of vibrations of the pointing system caused by two fundamental stochastic mechanisms: tracking noise created by the electro-optic tracker and vibrations derived from mechanical components. Vibration of the transmitter beam in the receiver plane causes a decrease in the received optical power. Vibrations of the receiver telescope relative to the received beam decrease the heterodyne mixing efficiency. These two factors increase the bit-error rate of a coherent detection network. We derive simple mathematical models of the network bit-error rate versus the system parameters and the transmitter and receiver vibration statistics. An example of a practical optical heterodyne free-space satellite optical communication network is presented. From this research it is clear that even low-amplitude vibration of the satellite-pointing systems dramatically decreases network performance.     

Beam width and transmitter power adaptive to tracking system performance for free-space optical communication

The basic free-space optical communication system includes at least two satellites. To communicate between them, the transmitter satellite must track the beacon of the receiver satellite and point the information optical beam in its direction. Optical tracking and pointing systems for free space suffer during tracking from high-amplitude vibration because of background radiation from interstellar objects such as the Sun, Moon, Earth, and stars in the tracking field of view or the mechanical impact from satellite internal and external sources. The vibrations of beam pointing increase the bit error rate and jam communication between the two satellites. One way to overcome this problem is to increase the satellite receiver beacon power. However, this solution requires increased power consumption and weight, both of which are disadvantageous in satellite development. Considering these facts, we derive a mathematical model of a communication system that adapts optimally the transmitter beam width and the transmitted power to the tracking system performance. Based on this model, we investigate the performance of a communication system with discrete element optical phased array transmitter telescope gain. An example for a practical communication system between a Low Earth Orbit Satellite and a Geostationary Earth Orbit Satellite is presented. From the results of this research it can be seen that a four-element adaptive transmitter telescope is sufficient to compensate for vibration amplitude doubling. The benefits of the proposed model are less required transmitter power and improved communication system performance.     

Multiple transmitter performance with appropriate amplitude modulation for free-space optical communication

The propagation of a free-space optical communications signal through atmospheric turbulence experiences random fluctuations in intensity, including signal fades, which negatively impact the performance of the communications link. The gamma-gamma probability density function is commonly used to model the scintillation of a single beam. One proposed method to reduce the occurrence of scintillation-induced fades at the receiver plane involves the use of multiple beams propagating through independent paths, resulting in a sum of independent gamma-gamma random variables. Recently an analytical model for the probability distribution of irradiance from the sum of multiple independent beams was developed. Because truly independent beams are practically impossible to create, we present here a more general but approximate model for the distribution of beams traveling through partially correlated paths. This model compares favorably with wave-optics simulations and highlights the reduced scintillation as the number of transmitted beams is increased. Additionally, a pulse-position modulation scheme is used to reduce the impact of signal fades when they occur. Analytical and simulated results showed significantly improved performance when compared to fixed threshold on/off keying.     

Binary phase-only filtering for turbulence compensation in fiber-coupled free-space laser communication systems

Binary wavefront control in the focal plane (i.e., binary phase-only filtering) for partial compensation of atmospheric turbulence in fiber-coupled free-space laser communication systems is investigated. Numerical results from wave-optics simulations show that in an air-to-air scenario, the combination of binary phase-only filtering and centroid tracking provides mean fiber coupling efficiency close to that resulting from ideal least-squares adaptive optics, but without the requirement for direct wavefront sensing. This result suggests a simpler and less computationally demanding turbulence mitigation system that is more readily applied to tactical applications.     

Effects of fog on the bit-error rate of a free-space laser communication system

Free-space laser communication (lasercom) systems are subject to performance degradation when heavy fog or smoke obscures the line of sight. The bit-error rate (BER) of a high-bandwidth (570 Mbits/s) lasercom system was correlated with the atmospheric transmission over a folded path of 2.4 km. BER's of 10(-7) were observed when the atmospheric transmission was as low as 0.25%, whereas BER's of less than 10(-10) were observed when the transmission was above 2.5%. System performance was approximately 10 dB less than calculated, with the discrepancy attributed to scintillation, multiple scattering, and absorption. Peak power of the 810-nm communications laser was 186 mW, and the beam divergence was purposely degraded to 830 murad. These results were achieved without the use of error correction schemes or active tracking. An optimized system with narrower beam divergence and active tracking could be expected to yield significantly better performance.     

Performance analysis of a free-space laser communication system with a Gaussian Schell model

In practice, due to reasons related to the characteristics of the laser device and the inevitable error of the processing technique, a laser beam emitted from a communication terminal is represented by the Gaussian–Schell model. The incident optical intensity at the receiver aperture is affected by the source coherence parameter through atmospheric turbulence. With full consideration of both the average optical intensity and the scintillation, the statistical distribution of the optical intensity and the average bit error rate (BER) of an on-off keying (OOK) receiver is obtained. The results indicate that the effect on the degradation of the average optical intensity is reduced with a smaller beamwidth. The performance of the OOK receiver degrades drastically with the increasing source coherence parameter. Moreover, when the beamwidth becomes larger, the BER₀ with a consistent source coherence parameter shifts to the side of lower BER. The goal of this work is to improve the redundancy design of the laser communication receiver system.     

Power versus stabilization for laser satellite communication.

To establish optical communication between any two satellites, the lines of sight of their optics must be aligned for the duration of the communication. The satellite pointing and tracking systems perform the alignment. The satellite pointing systems vibrate because of tracking noise and mechanical impacts (such as thruster operation, the antenna pointing mechanism, the solar array driver, navigation noise, tracking noise). These vibrations increase the bit error rate (BER) of the communication system. An expression is derived for adaptive transmitter power that compensates for vibration effects in heterodyne laser satellite links. This compensation makes it possible to keep the link BER performance constant for changes in vibration amplitudes. The motivation for constant BER is derived from the requirement for future satellite communication networks with high quality of service. A practical situation of a two-low-Earth-orbit satellite communication link is given. From the results of the example it is seen that the required power for a given BER increases almost exponentially for linear increase in vibration amplitude.     

Atmospheric turbulence effects on a partially coherent Gaussian beam: implications for free-space laser communication

A partially coherent quasi-monochromatic Gaussian laser beam propagating in atmospheric turbulence is examined by using a derived analytic expression for the cross-spectral density function. Expressions for average intensity, beam size, phase front radius of curvature, and wave-front coherence length are obtained from the cross-spectral density function. These results provide a model for a free-space laser transmitter with a phase diffuser used to reduce pointing errors.     

Optimization of a laser satellite communication system with an optical preamplifier

We derive a model that optimizes the performance of a laser satellite communication link with an optical preamplifier in the presence of random jitter in the transmitter-receiver line of sight. The system utilizes a transceiver containing a single telescope with a circulator. The telescope is used for both transmitting and receiving and thus reduces communication terminal dimensions and weight. The optimization model was derived under the assumption that the dominant noise source was amplifier spontaneous-emission noise. It is shown that, given the required bit-error rate (BER) and the rms random pointing jitter, an optimal transceiver gain exists that minimizes transmitted power. We investigate the effect of the amplifier spontaneous-emission noise on the optimal transmitted power and gain by performing an optimization procedure for various combinations of amplifier gain and noise figure. We demonstrate that the amplifier noise figure determines the optimal transmitted power needed to achieve the desired BER but does not affect the optimal transceiver telescope gain. Our numerical example shows that for a BER of 10(-9), doubling the amplifier noise figure results in an 80% increase in minimal transmitted power for a rms pointing jitter of 0.44 microrad.     

自适应光学技术在星地激光通信地面站上的应用

综述了自适应光学技术在星地激光通信地面站上应用的最新进展。针对星地链路中湍流效应导致的相干度退化和可用度降低的问题,自适应光学技术成为美国和欧洲等国正在研制的中继卫星至地光通信系统解决上述问题的主导手段。这些项目计划开展的自适应光学技术、白天和夜晚多地面站接收技术和相干通信技术等关键技术验证表明,星地激光通信正向高速相干和全天时高可用度的工程化推进。国内成功进行了多次星地光通信试验,高可用度的相干激光通信技术的验证正在积极开展,自适应光学技术已应用到多个地面站并取得了较好的初步试验效果,相关技术进展与国外水平保持一致。

     

Minimization of acquisition time in short-range free-space optical communication

We consider short-range (1-3-km) free-space optical communication between moving parties when covertness is the overriding system performance requirement. To maximize covertness, it is critical to minimize the time required for the acquisition phase, during which the party initiating contact must conduct a broad-field scan and so risks revealing his position. Assuming an elliptical Gaussian beam profile, we show how to optimize the beam divergence angles, scan speed, and design of the raster scan pattern so as to minimize acquisition time. In this optimization, several constraints are considered, including signal-to-noise ratio, required for accurate bearing detection and reliable decoding; limited receiver bandwidth; limited scanner speed; and beam divergence as limited by the scanner mirror dimensions. The effects of atmospheric turbulence are also discussed.     

Optimum divergence angle of a Gaussian beam wave in the presence of random jitter in free-space laser communication systems

The average bit error rate (BER) of optical communication systems is considered in the presence of random angular jitter. First, the received power and the BER in the absence of jitter are reviewed. Then the average BER is obtained in the presence of circularly symmetric, normally distributed jitter by using the probability density function of the optical signal. By minimizing the power penalty for average BER, the optimum ratio of the divergence angle of the laser beam to the random angular jitter at the desired BER is obtained. An analytic approximation of the optimum ratio is derived as a function of the desired average BER. The results can be used for designing the link budget of optical communication and tracking channels in the presence of jitter.     

Using benchmarking to improve organizational communication.

Best practice refers to those practices that lead to superior performance in a company or enterprise relative to industry or international leaders. Benchmarking of those activities that are critical to organizational performance is an important part of the identification and implementation of best-practice approaches. This article looks at communication as one aspect in the development of best practice in the management of safety, environment, and quality. A number of barriers to effective communication are identified, and benchmarks for the evaluation of organizational communication are suggested.     

Use of failure rate databases and process safety performance measurements to improve process safety

Employing equipment reliability databases can generate a process of continual improvement. This paper suggests a methodology that uses equipment reliability databases, and a process of benchmarking to establish a continual improvement procedure by learning "how others are doing it". A simple decision-making procedure is suggested too, to assist in prioritizing the processes/equipment that are considered to be improved as well as a methodology to measure the improvement.     

Performance analysis of free-space optical communication systems over atmospheric turbulence channels

Turbulence fading is one of the main impairments affecting the operation of free-space optical (FSO) communication systems. The authors study the performance of FSO communication systems, also known as wireless optical communication systems, over log-normal and gamma-gamma atmospheric turbulence-induced fading channels. These fading models describe the atmospheric turbulence because of its very good agreement with experimental measurement data. Closed-form expressions for the average (ergodic) capacity and the outage probability are derived for both statistical models. Another contribution of this work is a study of how the performance metrics are affected by the atmospheric conditions and other parameters such as the length of the link and the receiver's aperture diameter. The derived analytical expressions are verified by various numerical examples and can be used as an alternative to time-consuming Monte-Carlo simulations.     

Measurement of satellite communication parameters-transpondermeasurements

Measurement procedures and instrumentation for the in-orbit measurement of satellite communication parameters are presented. The measurement procedures are described by equations in which the unknown parameter is expressed by measurable or calculable quantities. The measurement error is evaluated on the basis of the parameter equation and component error estimates. The error estimate is considered useful for purposes of verifying the satellite design and for settling contractual arguments, should they arise     

To demonstrate four ways to improve interpersonal communication

Interpersonal communication is one way in which an individual might meet their needs and assist others in meeting their needs.In the process of communication we have the opportunity to gain information,and delonstrate the ability to request things to be done.So it's very important to maintain a good interpersonal communication.There are four ways to improve interpersonal communication which are positivity,openness,assurances,and sharing tasks.     

卫星角反射器的设计

以角反射器远场衍射理论为依据,提出了利用角反射器参数补偿速差的技术方案。即通过改变角反射器参数的大小,使得接收光斑的极值中心刚好回到测站位置,以弥补速差效应的影响。采用角反射器衍射光学理论与采用传统理论所得的卫星角反射器补偿角之间存在差异,这种差异随着轨道高度的不同而发生变化。以德国Champ卫星上角反射器为例,运用角反射器衍射光学理论进行了设计,设计所得的单角误差-3.70″与Champ卫星提供的-3.8″非常相近,而且按两者结果模拟得到的接收强度仅相差0.6%,从而验证了设计方法的正确性和可靠性。     

Interface management: effective communication to improve process safety

Failure to successfully communicate maintenance activities, abnormal conditions, emergency response procedures, process hazards, and hundreds of other items of critical information can lead to disaster, regardless of the thoroughness of the process safety management system. Therefore, a well-functioning process safety program depends on maintaining successful communication interfaces between each involved employee or stakeholder and the many other employees or stakeholders that person must interact with. The authors discuss a process to identify the critical “Interfaces” between the many participants in a process safety management system, and then to establish a protocol for each critical interface.     

Design of microchannel free-space optical interconnects based on vertical-cavity surface-emitting laser arrays

We investigate the design of free-space optical interconnects (FSOIs) based on arrays of vertical-cavity surface-emitting lasers (VCSELs), microlenses, and photodetectors. We explain the effect of the modal structure of a multimode VCSEL beam on the performance of a FSOI with microchannel architecture. A Gaussian-beam diffraction model is used in combination with the experimentally obtained spectrally resolved VCSEL beam profiles to determine the optical channel crosstalk and the signal-to-noise ratio (SNR) in the system. The dependence of the SNR on the feature parameters of a FSOI is investigated. We found that the presence of higher-order modes reduces the SNR and the maximum feasible interconnect distance. We also found that the positioning of a VCSEL array relative to the transmitter microlens has a significant impact on the SNR and the maximum feasible interconnect distance. Our analysis shows that the departure from the traditional confocal system yields several advantages including the extended interconnect distance and/or improved SNR. The results show that FSOIs based on multimode VCSELs can be efficiently utilized in both chip-level and board-level interconnects.