Factors governing the atmospheric deposition of polycyclic aromatic hydrocarbons to remote areas

Polycyclic aromatic hydrocarbons (PAH) were measured in bulk atmospheric deposition collected in three remote areas of Europe during 1997-1998. Mean total PAH fluxes over a period of 18 months were 1560 +/- 750 and 1150 +/- 630 ng m(-2) mo(-1) in the Pyrenees and the Alps, respectively. In the Caledonian mountains (Scandinavia) the observed mean fluxes were 1900 +/- 940 ng m(-2) mo(-1) (6 month collection). Similar qualitative PAH compositions (p values <0.05) in the bulk atmospheric deposition have been observed between sites, which are dominated by the more volatile parent compounds. The main differences between lakes are related to the high molecular weight compounds. Atmospheric deposition of PAH to these remote sites appears to be independent of their concentrations in the atmosphere, which are similar between sites (in the range of 1.8-3.0 ng x m(-3)), being controlled mainly by particle deposition, followed by precipitation and air temperature. A multilevel regression model including these three variables accounted for 74% of the total variability in total PAH bulk deposition; however, the contribution of each variable in the model is compound and site-dependent. The deposition of high molecular weight PAH depends more on particle deposition and precipitation, whereas air temperature is the main factor controlling the deposition fluxes of the low molecular weight PAH.     

Particle size distribution and polycyclic aromatic hydrocarbons emissions from agricultural crop residue burning

Laboratory measurements were conducted to determine particle size distribution and polycyclic aromatic hydrocarbons (PAHs) emissions from the burning of rice, wheat, and corn straws, three major agricultural crop residues in China. Particle size distributions were determined by a wide-range particle spectrometer (WPS). PAHs in both the particulate and gaseous phases were simultaneously collected and analyzed by GC-MS. Particle number size distributions showed a prominent accumulation mode with peaks at 0.10, 0.15, and 0.15 μm for rice, wheat, and corn-burned aerosols, respectively. PAHs emission factors of rice, wheat, and corn straws were 5.26, 1.37, and 1.74 mg kg(-1), respectively. It was suggested that combustion with higher efficiency was characterized by smaller particle size and lower PAHs emission factors. The total PAHs emissions from the burning of three agricultural crop residues in China were estimated to be 1.09 Gg for the year 2004.     

Gas-particle partitioning of polycyclic aromatic hydrocarbons in urban, adjacent coastal, and continental background sites of western Greece

Particle- and gas-phase polycyclic aromatic hydrocarbons (PAHs) were collected from an urban, an adjacent coastal, and a continental background site located in Eordea basin, western Greece, to investigate their gas/ particle distributions. Thirteen two- to six-ring PAHs, included in the U.S. EPA priority pollutant list, were determined in 24-h integrated glass fiber filters and polyurethane foam samples. At the prevailing ambient temperature levels, the three-ringed species (phenanthrene, anthracene) and the four-ringed fluoranthene and pyrene were primarily found in the gas phase. Conversely, the five- and six-ring PAHs were mainly associated with the particle phase. Gas/particle partitioning coefficients, Kp, were calculated, and their relationship with the subcooled liquid vapor pressure p degrees L of individual PAHs was investigated. Despite the large variability among samples, a good linear relationship between log Kp and log p degrees L was obtained for all sampling sites following the equation log Kp = m(r) log p degrees L + b(r). In the majority of sampling events, particularly in the adjacent coastal and the continental background sites, slopes (m(r)) were found to be shallower than the value of -1, which has been suggested as reflecting equilibrium partitioning. The deviations from predicted aerosol behavior observed in the present study may be attributed to several reasons, such as the presence of nonexchangeable PAH fraction, nonequilibrium as well as different particle characteristics.     

食品中多环芳烃及卤代多环芳烃的研究进展

综述了多环芳烃及卤代多环芳烃的性质、毒性及国内外食品中的污染情况和研究现状,并对目前的分析测定方法进行了介绍,希望为我国开展食品领域内多环芳烃和卤代多环芳烃的研究提供参考。     

Searching ingredients polluted by polycyclic aromatic hydrocarbons in feeds due to atmospheric or pyrolytic sources

The primary aim of the proposed work is to propose the potential sources of pollution by polycyclic aromatic hydrocarbons (PAHs) in feeds and ingredients. To reach this propose the development of a simple, fast, quantitative and economic method for determining PAHs using liquid-liquid extraction (LLE), clean-up and detection by liquid chromatography with fluorescence detection (LC-FD) in polluting feeds and ingredients was developed. The overall method quantification limits range from 0.020 to 4.0μg/kg and analyte recoveries are between 70% and 105% with relative standard deviations (RSD) lower than 20%. Molecular patterns of PAHs were used to study their distribution in the selected samples by cluster analysis, separating them in two groups: contaminated by atmospheric or pyrolytic sources. In order to find a relationship between the nutritional composition (protein, fibre, ash and fat content), and the hypothetical toxicity of selected feeds, a partial least squared (PLS) analysis was used, showing that fibre was a major contributor. Moreover, the complete data set of 27 feed samples and 25 feed ingredients x 13 PAH concentrations were analysed by PCA to find out what ingredients were controlling PAH pollution.     

Reductions in emissions of carbonaceous particulate matter and polycyclic aromatic hydrocarbons from combustion of biomass pellets in comparison with raw fuel burning

Biomass pellets are emerging as a cleaner alternative to traditional biomass fuels. The potential benefits of using biomass pellets include improving energy utilization efficiency and reducing emissions of air pollutants. To assess the environmental, climate, and health significance of replacing traditional fuels with biomass pellets, it is critical to measure the emission factors (EFs) of various pollutants from pellet burning. However, only a few field measurements have been conducted on the emissions of carbon monoxide (CO), particulate matter (PM), and polycyclic aromatic hydrocarbons (PAHs) from the combustion of pellets. In this study, pine wood and corn straw pellets were burned in a pellet burner (2.6 kW), and the EFs of CO, organic carbon, elemental carbon, PM, and PAHs (EF(CO), EF(OC), EF(EC), EF(PM), and EF(PAH)) were determined. The average EF(CO), EF(OC), EF(EC), and EF(PM) were 1520 ± 1170, 8.68 ± 11.4, 11.2 ± 8.7, and 188 ± 87 mg/MJ for corn straw pellets and 266 ± 137, 5.74 ± 7.17, 2.02 ± 1.57, and 71.0 ± 54.0 mg/MJ for pine wood pellets, respectively. Total carbonaceous carbon constituted 8 to 14% of the PM mass emitted. The measured values of EF(PAH) for the two pellets were 1.02 ± 0.64 and 0.506 ± 0.360 mg/MJ, respectively. The secondary side air supply in the pellet burner did not change the EFs of most pollutants significantly (p > 0.05). The only exceptions were EF(OC) and EF(PM) for pine wood pellets because of reduced combustion temperatures with the increased air supply. In comparison with EFs for the raw pine wood and corn straw, EF(CO), EF(OC), EF(EC), and EF(PM) for pellets were significantly lower than those for raw fuels (p < 0.05). However, the differences in EF(PAH) were not significant (p > 0.05). Based on the measured EFs and thermal efficiencies, it was estimated that 95, 98, 98, 88, and 71% reductions in the total emissions of CO, OC, EC, PM, and PAHs could be achieved by replacing the raw biomass fuels combusted in traditional cooking stoves with pellets burned in modern pellet burners.     

Aqueous photodegradation of polycyclic aromatic hydrocarbons

Photodegradation of 12 polycyclic aromatic hydrocarbons was studied in aerated pure water, solutions of Suwannee River fulvic acid, and natural waters using polychromatic light (>290 nm). Quantum yields in pure water varied from 3.2 x 10(-5) to 9.2 x 10(-3). No obvious relationships were evident among the quantum yields and molecular properties. Photodegradation rate constants in solutions of Suwannee River fulvic acid or natural waters were largely unchanged compared to rate constants in pure water. Estimates of PAH photodegradation rates in natural waters can thus be obtained employing the quantum yields in pure water, PAH absorption, and solar irradiance. Calculated rate constants for photodegradation in surface waters during the summertime at mid-latitude varied from 3.2 x 10(-3) to 7.6 h(-1).     

Indoor levels of polycyclic aromatic hydrocarbons in homes with or without wood burning for heating

The aim of this study was to investigate the impact of domestic wood burning on indoor levels of polycyclic aromatic hydrocarbons (PAHs). Indoor and outdoor concentrations of 27 PAHs were measured during wintertime in homes with (n= 13) or without (n 0) wood-burning appliances and at an ambient site in a Swedish residential area where wood burning for space heating is common. Twenty-four hour indoor levels of anthracene, benzo(ghi)fluoranthene, cyclopenta(cd)pyrene, benz(a)anthracene, chrysene/triphenylene, benzo(a)pyrene (BaP), indeno(1,2,3-cd)pyrene, benzo(ghi)perylene, and coronene were significantly (about 3- to 5-fold) higher in homes with, compared with homes without, wood-burning appliances. The outdoor levels of PAHs were generally higher than the indoor levelsfor all PAHs exceptforthe methylated phenanthrenes. The total PAH cancer potency (sum of BaP equivalents) was significantly higher (about 4 times) in the wood-burning homes compared with the reference homes, with BaP being the largest contributor, while phenanthrene made the largest contribution to the total PAH concentration in indoor and outdoor air. The median indoor BaP level in the wood-burning homes (0.52 ng/m3) was 5 times higher than the Swedish health-based guideline of 0.1 ng/m3, which was also exceeded outdoors on all days (median 0.37 ng/m3).     

Alternative normalization method of atmospheric polycyclic aromatic hydrocarbons pollution level recorded by tree bark

An alternative normalization method was developed for evaluating atmospheric polycyclic aromatic hydrocarbons (PAHs) pollution level when using tree bark as a passive sampling medium. Perylene (PER), which mainly stems from natural biogenic processes, was proposed as a "natural internal compound" (NIC) of atmospheric PAHs accumulation processes from air into the bark, and a concentration ratio of target PAH to PER (RPAH/PER) was used to minimize the uncertainty in the evaluation of atmospheric PAHs pollution level. Systematic investigation of the effects of intrinsic bark characteristics and extrinsic seasonal meteorological conditions on the partition processes of atmospheric PAHs indicated that RPAH/PER is as an alternative index as compared to bark mass concentration (BMCPAH, ng/g dry bark), lipid mass concentration (LMCPAH, ng/g lipid of bark), and area mass concentration (AMCPAH, ng/m2 surface area of bark) for the evaluation of atmospheric PAHs pollution and that it allows more flexible sampling of tree barks. Clearly, the methodology should be expected to be useful for the objective evaluation of atmospheric pollution levels of other persistent organic pollutants when using tree bark and other passive sampling media if corresponding NICs are found in the future.     

Emission of polycyclic aromatic hydrocarbons in China

Emission of 16 polycyclic aromatic hydrocarbons (PAHs) listed as U.S. Environmental Protection Agency (U.S. EPA) priority pollutants from major sources in China were compiled. Geographical distribution and temporal change of the PAH emission, as well as emission profiles, are discussed. It was estimated that the total PAH emission in China was 25,300 tons in 2003. The emission profile featured a relatively higher portion of high molecular weight (HMW) species with carcinogenic potential due to large contributions of domestic coal and coking industry. Among various sources, biomass burning, domestic coal combustion, and coking industry contributed 60%, 20%, and 16% of the total emission, respectively. Total emission, emission density, emission intensity, and emission per capita showed geographical variations. In general, the southeastern provinces were characterized by higher emission density, while those in western and northern China featured higher emission intensity and population-normalized emission. Although energy consumption in China went up continuously during the past two decades, annual emission of PAHs fluctuated depending on the amount of domestic coal consumption, coke production, and the efficiency of energy utilization.     

Spatial distributions and profiles of atmospheric polycyclic aromatic hydrocarbons in two industrial cities in Japan

The spatial distribution and concentration profiles of 39 vapor and particulate polycyclic aromatic hydrocarbons (PAHs) have been investigated in two Japanese industrial cities (Fuji and Shimizu; a summer and winter season in each). The concentrations of particulate PAHs in winter tended to be higher than those in the summer, but for vapor PAHs, this was not the case. Significant correlations (p < 0.01) were found between most of the PAH concentrations monitored in winter, suggesting the presence of common emission sources. To identify PAH spatial distributions and emission sources in the area, we created contour maps for PAHs monitored; this indicates that the distinctive local distributions correspond to the emission sources. PAH profiles based on benzo[e]pyrene (BeP) concentration, especially for certain relatively heavy molecular weight PAHs, showed differential behaviors among divided areas related to potential regional emission sources such as paper-making plants, power plants, and traffic. We conclude that the origins of atmospheric PAHs in the surveyed areas were dominated by not only traffic but also by stationary emission sources such as paper-making plants and power plants and that local distributions were dependent on the local wind direction.     

Transport of gas-phase polycyclic aromatic hydrocarbons to the Venice lagoon

Concentrations of gas-phase polycyclic aromatic hydrocarbons (PAHs) were studied over one year at two sites of the Venice lagoon (designated Marine and Industrial) and at a mainland station (designated Rural) in Italy. Average sigmaPAH concentrations, calculated as sum of 16 PAHs, at Marine are about three and five times lower than those at Industrial and Rural, respectively. The seasonal trends, the temperature-PAH relationship, and principal component analysis indicate that at Industrial and Marine sites several local sources (vehicle and industrial emissions, etc.) could be the PAH sources in the warmer months, whereas in the colder months the main PAH sources could alternate between vehicle emissions and residential heating. At Rural the main PAH sources are: vehicle emissions in the spring and autumn; vehicle emissions, field burning, and wood combustion in the summer; and vehicle emissions and fuel consumption for residential heating in the winter. To evaluate the contribution from different sources to the Venice Lagoon air, horizontal fluxes of PAHs have been obtained. The estimated annual flux of PAHs is about 9 times greater at Industrial (193.5 mg m(-2) y(-1)) than at Marine (20.6 mg m(-2) y(-1)). These results show that study of the chemical contamination of the Venice atmosphere must take into account the PAH flux derived from marine sources as well as the continental input.     

Modeling photoinduced algal toxicity of polycyclic aromatic hydrocarbons

The influence of light conditions on the toxicity of polycyclic aromatic hydrocarbons (PAHs) to different organisms has long been recognized. The aim of this study was to investigate whether previously proposed models can be used to qualitatively and quantitatively predict photoinduced toxicity to the green algae Scenedesmus vacuolatus. For this purpose 14 different PAH compounds were tested under three different light conditions for their effects on the algae reproduction. Illumination conditions comprised standard algae growth light, simulated sunlight aiming to mimic environmental light conditions, and UV-filtered light in order to minimize light influence on PAH toxicity. Models proposed for the prediction of photoinduced toxicity were modified in order to account for different exposure conditions and toxic endpoints used in the bioassay. The results of this study show that the gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) proposed as an indication for photoinduced toxicity to Daphnia magna can be used as a qualitative indication of a potential photoinduced toxicity to the green algae Scenedesmus vacuolatus. The impact of light conditions on PAH toxicity can be quantified by a linear model which allows the estimation of the ED50 of each compound from the amount of absorbed photons and an empirically determined relative phototoxic efficacy value of the compound.