Transparent epoxy resin material with excellent fire retardancy enabled by a P/N/S containing flame retardant

An epoxy resin (EP) with excellent fire retardancy, good transparency, and satisfactory thermal stability has been obtained by introducing a new N/P/S containing flame retardant (HBD) into EP composites. When the phosphorus content was 0.48 wt%, EP/HBD reached V-0 rating with the limiting oxygen index of 33.5%. The cone calorimeter test (CC) indicated that the incorporation of HBD resulted in 1.5 times increase in ignition time, a 50% decrease in the maximum of heat release rates, 40% reduction of total heat release, and 50.7% decrease in total smoke production compared with EP. Besides, the fire-resistant behavior of EP/8% HBD is much better than the EP materials modified by similar P/N/S flame retardants reported in literature. The fire-retardant mechanism of HBD on EP was also analyzed by Raman, scanning electron microscope, Py-GC/MS, and Fourier transform infrared spectroscopy. The results show that HBD plays an important role in the formation of a dense intumescent carbon layer and gas phase quenching.     

A novel flame retardant UV‐curable vinyl ester resin monomer based on industrial dipentene: Preparation,characterization, and properties

A novel bio‐based and flame‐retardant UV‐curable vinyl ester resin (VER) monomer named Diglycidyl ester of maleinized dipentene modified with dibutyphosphate and methacrylic anhydride (MDDMD) was synthesized from industrial dipentene via Diels‐Alder reaction, glycidylation, epoxy ring‐opening reaction, and esterification. Its chemical structures were characterized by Fourier transform infrared (FTIR) analysis and proton nuclear magnetic resonance (¹H‐NMR). In order to improve its flexibility, we prepared a series of copolymers under UV light radiation by mixing it with certain proportions of poly(ethylene glycol) dimethacrylate‐200 (PEGDMA‐200) which contained flexible groups. Their tensile property, curing degrees (CD), hardness, limiting oxygen index (LOI), dynamic mechanical thermal properties, and thermostability were all investigated. The cured mixed resins have a relatively high tensile strength of 10.05 MPa and curing degrees up to 92.5%. Both hardness (range: 50 to 23 HD) and LOI (range: 22.8% to 24.4%) of cured resins are improved with the increase of MDDMD content. Dynamic mechanical analysis (DMA) shows that their glass transition temperatures rise with the increase of MDDMD content. Thermogravimetric analysis (TGA) shows that the thermal stability of cured resins is enhanced with the increase of PEGDMA‐200 content, as the main thermal initial decomposition temperatures are all above 260 °C and char yield at 800 °C are above 18.10%. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44084.     

Synthesis of a novel phosphorus‐containing dicyclopentadiene novolac hardener and its cured epoxy resin with improved thermal stability and flame retardancy

A novel phosphorus‐containing dicyclopentadiene novolac (DCPD‐DOPO) curing agent for epoxy resins, was prepared from 9,10‐dihydro‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and n‐butylated dicyclopentadiene phenolic resin (DCPD‐E). The chemical structure of the obtained DCPD‐DOPO was characterized with FTIR, ¹H NMR and ³¹P NMR, and its molecular weight was determined by gel permeation chromatography. The flame retardancy and thermal properties of diglycidyl ether bisphenol A (DGEBA) epoxy resin cured with DCPD‐DOPO or the mixture of DCPD‐DOPO and bisphenol A‐formaldehyde Novolac resin 720 (NPEH720) were studied by limiting oxygen index (LOI), UL 94 vertical test and cone calorimeter (CCT), and differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. It is found that the DCPD‐DOPO cured epoxy resin possess a LOI value of 31.6% and achieves the UL 94 V‐0 rating, while its glass transition temperature (T_g) is a bit lower (133 °C). The T_g of epoxy resin cured by the mixture of DCPD‐DOPO and NPEH720 increases to 137 °C or above, and the UL 94 V‐0 rating can still be maintained although the LOI decreases slightly. The CCT test results demonstrated that the peak heat release rate and total heat release of the epoxy resin cured by the mixture of DCPD‐DOPO and NPEH720 decrease significantly compared with the values of the epoxy resin cured by NPEH720. Moreover, the curing reaction kinetics of the epoxy resin cured by DCPD‐DOPO, NPEH720 or their mixture was studied by DSC. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44599.     

Synthesis of a novel flame retardant containing phosphazene and triazine groups and its enhanced charring effect in poly(lactic acid) resin

A novel flame retardant heax‐[N,N′,N″‐tris‐(2‐amino‐ethyl)‐[1,3,5] triazine‐2,4,6‐triamine] cyclotriphosphazene (HTTCP) containing phosphazene and triazine groups was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), solid‐state ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy. HTTCP was applied to PLA matrix. The results of thermal gravimetric analysis (TGA), the limited oxygen index (LOI), and cone calorimeter test indicated that the HTTCP enhanced the thermal stability and flame retardant properties of PLA. When the mass fraction of HTTCP was 25 wt %, the PLA composite acquired a LOI value of 25.2% and the lower pk‐HRR at 290 kW/m². The excellent flame retardancy of HTTCP was attributed to the group synergistic effect between phosphazene and triazine groups. However, when combined HTTCP with APP (the total amount remaining 25 wt %, the ratio of HTTP to APP are 1:1 and 1:2), high values of LOI (over 40%) and UL94 V‐0 rating without dripping reached simultaneously. Meanwhile, the heat release rate, total heat release and mass loss rate were all decreased dramatically. Scanning electron microscopy (SEM) demonstrated that HTTCP/APP system benefited to the formation of more intumescent, dense, compact char layer on the materials surface which could effectively prevent the underlying material from degradation during burning. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44660.     

The synthesis and characterization of a novel phosphorus–nitrogen containing flame retardant and its application in epoxy resins

A novel, halogen‐free, phosphorus–nitrogen containing flame retardant 2[4‐(2,4,6‐Tris{4‐[(5,5‐dimethyl‐2‐oxo‐2λ⁵‐[1,3,2]dioxaphosphinan‐2‐yl)hydroxymethyl]phenoxy}‐(1,3,5)‐triazine (TNTP) was successfully synthesized in a three‐step process, and characterized by FTIR, NMR spectroscopy, mass spectra, and elemental analysis. A series of modified DGEBA epoxy resin with different loadings of TNTP were prepared and cured by 4,4‐diaminodiphenylsulfone (DDS). Thermal gravimetric analysis and vertical burning test (UL‐94) were used to evaluate the flame retardancy of TNTP on DGEBA epoxy resin. The results showed that TNTP had a great impact on flame retardancy. All modified thermosets by using TNTP exhibited higher T_g than pure DGEBA/DDS. The loading of TNTP at only 5.0 wt % could result in satisfied flame retardancy (UL‐94, V‐0) together with high char residue (27.3%) at 700°C. The addition of TNTP could dramatically enhance the flame retardancy of DGEBA epoxy resins, which was further confirmed by the analysis of the char residues by scanning electron microscopy and FTIR. Furthermore, no obviously negative effect was found on the Izod impact strength and flexural property of DGEBA epoxy resins when TNTP loading limited in 5.0 wt %. DGEBA/DDS containing 2.5 wt % TNTP could enhance Izod impact strength from 10.47 to 10.94 kJ m^?2, and showed no appreciable effect on the flexural property (85.20 MPa) comparing with pure DGEBA/DDS (87.03 MPa). Results indicated that TNTP as a phosphorus–nitrogen synergistic intumescent flame retardant could be used for DGEBA epoxy resin. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41079.     

Chemical modification of alkyd resin by a DOPO derivative and its flame retardancy

9,10‐Dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and its derivatives have been widely used as effective flame retardants. In this study, 6‐((bis(2‐hydroxyethyl) amino) methyl)‐6H‐dibe‐nzo[c,e][1,2]oxaphosphinine‐6‐oxide (DHDOPO) was synthesized from DOPO, paraformaldehyde, and diethanolamine, and subsequently used as a reactant for synthesis of flame retarded alkyd resin (FR‐ALK). Thermogravimetric analysis (TGA) showed that DHDOPO had relatively high thermal stability and would not decompose at synthesis temperature of ALK. The thermal stability and flame retardancy of ALKs were improved by introduction of DHDOPO. As the mass fraction of phosphorus in FR‐ALK increased the decomposition temperature, the char yield in TGA experiments, the fire residue, and time to ignition in cone calorimeter tests increased, and peak heat release rate (PHRR) and total heat release (THR) decreased. Compared with the non‐flame retarded ALK the PHRR and THR values of FR‐ALK containing 2.5 wt % phosphorus decreased, respectively, by 43.1% and 58.5%. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45643.     

Reactive organophosphorus flame retardant for transparency,low-flammability,and mechanical reinforcement epoxy resin

To maintain transparency and improve flame retardancy and mechanical properties of epoxy resin, a reactive organophosphorus flame retardant (DPDDM) was designed and synthesized, which was derived from 3,4-dihydroxybenzaldehyde, 4, 4′- diamino diphenylmethane and 9,10-dihydro-9-oxa –10- phosphaphenanthrene-10-oxidein two steps. Compared with neat epoxy resin (EP), the tensile strength and flexural strength of the EP with 5% DPDDM increased by 28.6% and 42.8%, respectively, indicating that DPDDM can significantly improve the mechanical properties of EP materials. Meanwhile, the DPDDM modified EP materials have good transparency and the EP with 5% DPDDM passed the V-0 rating and had the limiting oxygen index as high as 34%. Cone calorimeter test results showed that the heat release and smoke generation of the modified materials were significantly lower than the unmodified materials, which were reduced by 32.6% and 64.6%, respectively, indicating that the modified materials can greatly improve the safety of fire prevention. This work provides a new approach to prepare transparent epoxy resin with good mechanical properties and excellent flame retardancy.     

Synthesis and performance of a novel nitrogen‐containing cyclic phosphate for intumescent flame retardant and its application in epoxy resin

A novel nitrogen‐containing cyclic phosphate (NDP) was synthesized and well characterized by ¹H, ¹³C, ³¹P NMR, mass spectra and elemental analysis. NDP was used as an additive intumescent flame retardant (AIFR) to impart flame retardancy and dripping resistance for diglycidyl ether of bisphenol‐A epoxy resin (DGEBA) curied by 4,4′‐diaminodiphenylsulfone (DDS) with different phosphorus content. The flammability, thermal stability, and mechanical properties of NDP modified DGEBA/DDS thermosets were investigated by UL‐94 vertical burning test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Izod impact strength and flexural property tests. The results showed that NDP modified DGEBA/DDS thermosets exhibited excellent flame retardancy, moderate changes in glass transition temperature and thermal stability. When the phosphorus content reached only 1.5 wt %, the NDP modified DGEBA/DDS thermoset could result in satisfied flame retardancy (UL‐94, V‐0). The TGA curves under nitrogen and air atmosphere suggested that NDP had good ability of char formation, and there existed a distinct synergistic effect between phosphorus and nitrogen. The flame retardant mechanism was further realized by studying the structure and morphology of char residues using FT‐IR and scanning electron microscopy (SEM). It indicated that NDP as phosphorus‐nitrogen containing flame retardant worked by both of the condensed phase action and the vapor phase action. Additionally, the addition of NDP decreased slightly the flexural strength of the flame retarded DGEBA epoxy resins, and increased the Izod impact strength of these thermosets. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41859.     

Synthesis and characterization of dicyclic silicon-/phosphorus-grafted alumina and its application in improving flame retardancy of epoxy resin

A new phosphorous/silicon/aluminum hybrid flame retardant (SAlu) was prepared by a surface grafting modification of alumina with a polymer (SDPS). The polymer was prepared by a condensation reaction between 3,9-dichloro-2,4,8,10-tetrahydroxy-3,9-diphosphate heterocyclic-3,9-dioxide [5.5] undecane (SPDPC) and diphenyldisiloxol. The structure of the SAlu was further characterized by Fourier transform infrared spectroscopy, X-ray diffraction, UV–Vis absorption, and particle size analysis. Thermogravimetric analysis showed that SPDS was grafted over 40% of the alumina surface. When introduced into epoxy resin, SAlu effectively improved the thermal stability and carbonization rate of the epoxy composites at high temperature. Carbonization studies showed that SAlu promoted formation of a ceramic-carbon coking structure with a porous morphology of aggregates, which isolate combustible materials, heat, and oxygen. These features improved the flame retardant performance of the composite. The solidified materials were evenly dispersed in the network structure to improve the elastic deformation ability and glass transition temperature of the solidified resin.     

Synthesis of a novel phosphonate flame retardant and its application in epoxy resins

A novel phosphonate flame retardant additive bis(2,6‐dimethyphenyl) phenylphosphonate (BDMPP) was synthesized from phenylphosphonic dichloride and 2,6‐dimethyl phenol, and its chemical structure was characterized by Fourier transform infrared (FTIR) spectroscopy, ¹H and ³¹P nuclear magnetic resonance. The prepared BDMPP and curing agent m‐phenylenediamine were blended into epoxy resins (EP) to prepare flame retardant EP thermosets. The effect of BDMPP on fire retardancy and thermal degradation behavior of EP/BDMPP thermosets was investigated by limiting oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter and thermalgravimetric analysis (TGA). The morphologies of char residues of the EP thermosets were investigated by scanning electron microscopy (SEM) and the water resistant properties of thermosets were evaluated by putting the samples into distilled water at 70°C for 168 h. The results demonstrated that the cured EP/14 wt % BDMPP composites with the phosphorus content of 1.11 wt % successfully passed UL‐94 V‐0 flammability rating and the LOI value was as high as 33.8%. The TGA results indicated that the introduction of BDMPP promoted EP matrix decomposed ahead of time compared with that of pure EP and led to a higher char yield at high temperature. The incorporation of BDMPP enhanced the mechanical properties and reduced the moisture absorption of EP thermosets. The morphological structures of char residue revealed that BDMPP benefited to the formation of a more compact and homogeneous char layer on the materials surface during burning, which prevented the heat transmission and diffusion, limit the production of combustible gases and then lead to the reduction of the heat release rate. After water resistance tests, EP/BDMPP thermosets still remained excellent flame retardancy. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42765.     

An intrinsic flame retardant epoxy resin with high transparency and strengthened mechanical property

In order to search for multifunctional epoxy thermosets (EP) with low flammability, high transparency and satisfied mechanical performance, DOPO-based phosphonate ammonium salt (DOA) was synthesized from 10-hydroxy-9,10-dihydro-9-oza-10-phosphaphenanthrene-10-oxide (DOPO-OH) and 2-amino-2-methyl-1,3-propanediol (AMPD). Under the influence of DOA, the flame-retardant and mechanical performances of the resulting EP were obviously improved. On account of the enhanced interaction and the incorporated flexible fragments in epoxy macromolecular chains, the tensile strength, elongation at break, and impact toughness of EP/5.0 wt% DOA significantly increased from 65.4 ± 1.2 MPa, 6.7 ± 0.6%, and 12.1 ± 1.3 kJ m⁻² of EP to 81.4 ± 2.8 MPa, 10.6 ± 0.5%, and 18.0 ± 1.1 kJ m⁻², respectively. In the presence of DOA, the limiting oxygen index (LOI) value of EP/5.0 wt% DOA increased to 35.5% and it passed the underwriter laboratories-94 vertical burning tests (UL-94 V) and got a V-1 rating. Moreover, the peak value of heat release rate (PHRR) was decreased by 38.0%. The analyses of char residues and volatile products showed that the activities of DOA on reducing the flammability of EP were ascribed to the protective effect of the char, the release of incombustible gases, and the radical-capture action of phosphorus-containing free radicals. Moreover, the modified epoxy thermosets still retained a high transparency.     

Preparation and properties of modified aluminum diethylphosphinate flame retardant for low-density polyethylene

To improve the flame retardancy of low-density polyethylene (LDPE) and mechanical properties of LDPE composites, phenol-formaldehyde aluminum diethylphosphinate microcapsules (PF@ADP) was prepared by in-situ polymerization with phenol-formaldehyde (PF) resin as the wall material and halogen-free flame-retardant aluminum diethylphosphinate (ADP) as the core material. The effects of PF@ADP on flame retardancy and mechanical properties of LDPE were investigated by methods of combustion experiments, mechanical analysis, thermogravimetric analysis (TGA), and smoke density analysis. The results indicated that, compared with ADP/LDPE composites, the flame retardancy and mechanical properties of PF@ADP/LDPE were obviously improved. With the addition of 20 wt% PF@ADP (PF:ADP = 3:7), the limit oxygen index (LOI) of LDPE composites increased to 30.7% and UL-94 reached V-1 grade. The tensile strength and elongation at break reached 12.5 MPa and 431.2%, which was 20.2% and 23.1% higher than that of ADP/LDPE with the same addition. The addition of PF@ADP was beneficial to the smoke suppression of LDPE.     

Reactive flame retardant with core‐shell structure and its flame retardancy in rigid polyurethane foam

With a shell of poly (methyl methacrylate‐co‐hydroxyl ethyl acrylate) (PMMA‐HA), microencapsulated ammonium polyphosphate (MHAPP) is prepared by in situ polymerization. The core‐shell structure of the reactive flame retardant (FR) is characterized by Fourier transform infrared (FTIR) and scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS). The results of water leaching rate and water contact angle measurements show that ammonium polyphosphate (APP) is well coated by a hydrophobic shell. Due to the presence of active groups (–OH) and hydrophobic groups (–CH₃) in shell, MHAPP exhibits better compatibility, flame retardancy, and water resistance compared with neat ammonium polyphosphate (APP) in rigid polyurethane foam (PU). Compression strength of PU/MHAPP with suitable loading is higher than that of PU/APP and PU, the reason is that the active groups in shell can improve the compatibility of MHAPP in PU composite. From thermal stability and residue analysis, it can be seen that the presence of reactive flame retardant shows positive effect on thermal stability of PU composite at high temperature, results also indicate that MHAPP can promote the carbonization formation efficiency of PU composite during combustion process compared with APP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42800.     

Flame retardancy and thermal properties of organoclay and phosphorous compound synergistically modified epoxy resin

Phosphorous flame retardants (PFRs) are common halogen‐free flame retardants. However, the flame retardancy of PFRs has not been fully exploited. Herein, the synergistic flame retardant effect of a typical phosphorous compound, 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO), and organoclay on epoxy is studied. Results show that the peak of heat release rate (pHRR) and smoke production rate of modified epoxy resin (EP) with both 2.0 wt % phosphorus and 4.0 wt % organoclay are only 40% and 46% of that of neat EP resin, respectively, while the sole use of 2.0 wt % phosphorus only decrease the pHRR to 59% of that of neat EP resin. The structure and thermal decomposition behavior of as‐prepared nanocomposites are analyzed, and a synergistic flame retardant mechanism is proposed. This investigation opens a new approach to obtain halogen‐free EPs with higher flame retardancy and better overall properties than the EPs loaded with DOPO only. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43367.     

Synthesis of a novel azaphosphorine flame retardant and its application in epoxy resins

A novel P? C? N bond containing azaphosphorine, 5‐(4‐hydroxy)anilinomethyl‐1,3‐di(4‐hydroxy)phenyl‐1,3,5‐diazaphosphorinane (ADDPP‐OH), which could be used as both a cocuring agent and a flame‐retarding agent for epoxy resins (EPs), was synthesized from tetrakis(hydroxymethyl)phosphonium sulfate and characterized by FTIR, ¹H‐NMR, ¹³C‐NMR, ³¹P‐NMR, and so on. Compared with the pure EP, the ADDPP‐OH–EP composites showed increased decomposition temperatures and char yields. When the content of ADDPP‐OH was 10 wt %, the cured EP composite possessed a limiting oxygen index value of 33.7% and passed the V‐0 rating of the UL‐94 test. The mechanical properties of the ADDPP‐OH–EP composites was improved because of the increased crosslinking density. In addition, the morphology of the residual char indicated an intumescent and multiporous structure in the inner space and a compact and continual appearance in the outer layer; this was important in preventing the materials from burning further. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45721.     

Melamine poly(metal phosphates) as flame retardant in epoxy resin: Performance,modes of action,and synergy

Melamine poly(metal phosphates) (MPMeP) are halogen‐free flame retardants commercialized under the brand name Safire. Melamine poly(aluminum phosphate) (MPAlP), melamine poly(zinc phosphate) (MPZnP), and melamine poly(magnesium phosphate) (MPMgP) were compared in an epoxy resin (EP). The thermal decomposition, flammability, burning behavior, and glass transition temperature were investigated using thermogravimetric analysis, pyrolysis combustion flow calorimeter, UL 94 testing, cone calorimeter, and differential scanning calorimetry. While the materials exhibited similarities in their pyrolysis, EP + MPZnP and EP + MPMgP showed better fire behavior than EP + MPAlP due to superior protective properties of the fire residues. Maintaining the 20 wt % loading, MPZnP was combined with various other flame retardants. A synergistic effect was evident for melamine polyphosphate (MPP), boehmite, and a derivative of 6H‐Dibenzo[c,e][1,2]oxaphosphinine‐6‐oxide. The best overall performance was observed for EP + (MPZnP + MPP) because of the best protection effectiveness of the fire residue. EP + (MPZnP + MPP) achieved V1/V0 in UL 94, and an 80% reduction in the peak heat release rate. This study evaluates the efficiency of MPMeP in EP, alone and in combination with other flame retardants. MPMeP is a suitable flame retardant for epoxy resin, depending on its kind and synergists. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43549.     

Effect of gas-condensed phase synergistic system of 9,10-dihydro-9-oxo-10-phosphaphenanthrene-10-oxide and polydopamine on flame retardancy of epoxy resin

Polydopamine (PDA) was prepared by using dopamine which has good charring ability. The PDA was used as an environmentally friendly flame retardant and combined with 9,10-dihydro-9-oxo-10-phosphaphenanthrene-10-oxide (DOPO) to improve the flame retardancy of epoxy (EP) resin. The flame retardancy and thermal stability of EP composites were researched by UL-94 vertical burning, limiting oxygen index (LOI), cone calorimetry tests, and thermal gravimetric analyzer. Adding DOPO alone requires 6% to make EP obtain the UL-94 V0. If DOPO and PDA are combined, only 4% is needed to make EP obtain the UL-94 V0, which suggests that there is good synergistic effect between them. Moreover, the peak of heat release rate of EP/DOPO/PDA composites is less than that of EP/DOPO composites. The reactions among EP, DOPO, and PDA reduce the release of combustible gases at the early stage of degradation; at the same time, DOPO volatilize to the gas phase, quench the free radicals, and the combustion can be stopped. In addition, due to the decrease of the amount of PDA/DOPO, the EP composite can get a higher glass transition temperature, but due to the aggregation of PDA in EP, the tensile property of EP composite decreases.     

Halloysite nanotubes immobilized by chitosan/tannic acid complex as a green flame retardant for bamboo fiber/poly(lactic acid) composites

In order to develop an environmentally benign flame retardant for bamboo/PLA composites (BPC), chitosan (CS) and tannic acid (TA) were used as cationic and anionic polyelectrolyte respectively to stabilize halloysite nanotubes (HNT) on the surface of bamboo fiber (BF) and poly(lactic acid) (PLA). Mechanical performance tests showed that the flexural properties of BPC were moderately enhanced with the addition of HNT, while the incorporation of CS/TA complex (FR) exhibited a slight increase. The results of thermogravimetric analysis demonstrated that CS/TA complex and HNT improved the thermal stability of the BPC synergistically, which increased the char residue. Limiting oxygen index and cone calorimetry tests were used to study the flammability of BPC and the results showed that the addition of CS/TA complex and HNT had a synergistic effect on the flame retardant performance of BPC materials. The macroscopic and microscopic morphological studies confirmed the formation of HNT layer in the matrix of BPC/5FR@5HNT samples, which facilitated more stabile char residue with the best flame retardant performance.     

Property of intrinsic flame retardant epoxy resin cured by functional magnesium organic composite salt and diethylenetriamine

An efficient intrinsic flame retardants composite was prepared by curing epoxy resin with a functional magnesium organic composite salt (FMOCS, 0.685 ± 0.3 nm) and diethylenetriamine (DETA). Curing behavior, thermal and flame‐retardant properties of the cured epoxy resins were systematically investigated by infrared spectrum (FTIR), thermogravimetric analysis (TGA), vertical burning test (UL‐94) and limited oxygen index (LOI) measurement. It was found that flame retardancy and mechanical properties of the cured composite are significantly enhanced compared with DETA/EP. The LOI of the EP reached to 33%, which is much higher than the DETA/EP (19%) or its IFR composite (31%) in the optimal addition of ammonium polyphosphate (APP, 18.69 wt %), pentaerythritol (PER, 6.21 wt %) and FMOCS (3.50 wt %). Furthermore, the mechanical properties of the composite material measurement results to imply that it can enhance tensile strength (150%) and bending strength (88%) rather than DETA/EP, which were tested by impact testing machine and microcomputer control electron universal testing machines. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of silicon‐/phosphorous‐containing epoxy resins from the fusion process to bring a synergistic effect on improving the resins' thermal stability and flame retardancy

Epoxy resins containing both phosphorous and silicon were prepared via the fusion process of reacting a phosphorous diol and a silicon diol with a bisphenol‐A‐type epoxy. With various feeding ratios of the reactants, epoxy resins with different phosphorous and silicon contents were obtained. Through curing the epoxies with diaminodiphenylmethane, the cured epoxy resins exhibit tailored glass transition temperatures (159–77°C), good thermal stability (>320°C), and high char yields at 700°C under air atmosphere. The high char yield was demonstrated to come from the synergistic effect of phosphorous and silicon, where phosphorous enriches char formation and silicon protects the char from thermal degradation. Moreover, high flame retardancy of the epoxy resins was found by the high LOI value of 42.5. The relationship of the char yields at 700°C under air atmosphere (ρ) and the LOI values of the epoxy resins could be expressed as LOI = 0.62ρ + 19.2. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 404–411, 2003