Thermal degradation of poly(dimethylsilylene) and poly(tetramethyldisilylene‐co‐styrene)

Thermal degradation of poly(dimethylsilylene) homopolymer (PDMS) and poly(tetramethyldisilylene‐co‐styrene) copolymer (PTMDSS) was investigated by pyrolysis‐gas chromatography and thermogravimetry (TG). PDMS decomposes by depolymerization, producing linear and cyclic oligomeric products, whereas PTMDSS decomposes by random degradation along the chain resulting in each monomeric product and various other combination products. The homopolymer was found to be much less stable than the copolymer. The decomposition mechanisms leading to the formation of various products are shown. The kinetic parameters of thermal degradation were evaluated by different integral methods using TG data. The activation energies of decomposition (E) for the homopolymer and the copolymer are found to be 122 and 181 kJ/mol, respectively, and the corresponding values of order of reaction are 1 and 1.5. The observed difference in the thermal stability and the values of the kinetic parameters for decomposition of these polymers are explained in relation with the mechanism of decomposition. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Study of uranium sorption using D2EHPA‐impregnated polymeric beads

The extractant‐impregnated polymeric beads (EIPBs), containing Di(2‐ethylhexyl) phosphonic acid (D2EHPA) as an extractant and polyethersulfone as base polymer, were prepared by phase‐inversion method. These beads were characterized by fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscope (SEM) analysis to gain insight into the composition and morphology of beads. The beads exhibited good acid stability as no significant structural deformation or leaching out of the extractant was observed in 6M HNO₃ solution, up to the studied equilibration time of 15 days. The synthesized EIPBs were evaluated, for their ability to absorb uranium from aqueous solution, at different concentration and pH values. The kinetics measurement showed that about 90 min of equilibration time was enough to remove saturation amount of uranium from the solution. Kinetic modeling analysis of the extraction results was carried out using pseudo‐first‐order, pseudo‐second‐order, and intraparticle diffusion equations and the corresponding rate constants were determined. The equilibrium data were fitted into different isotherm models and were found to be represented well by the Freundlich isotherm equation. Reusability of the beads was also established by multiple sorption–desorption experiments. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3355–3364, 2013     

Determination of trace macrolide antibiotics in milk with online solid‐phase extraction with an ionic‐liquid‐based monolithic column

An ionic liquid (IL)‐based monolithic poly(ionic liquid glycidylmethacrylate‐co‐ethylene glycol dimethacrylate) column was prepared via in situ free‐radical polymerization with 1‐vinyl‐3‐butylimidazolium chlorine as one of the comonomers. The obtained monolithic column was used as the sorbent of solid‐phase extraction (SPE) and coupled with high‐performance liquid chromatography for the simultaneous determination of the macrolide antibiotics roxithromycin (ROX) and acetylspiramycin (ACE) in processed pure milk. The monolithic column was characterized by Fourier transform infrared spectrometry, scanning electron microscopy, nitrogen absorption–desorption, mercury intrusion porosimetry, and thermogravimetric analysis. The results reveal that the monolithic column exhibited a high selectivity and good permeability to the macrolide antibiotics in milk. The optimized method offered excellent linearity with a linear regression coefficient greater than 0.998. The precisions for interday and intraday were both less than 7.7%. The accuracies expressed by the recoveries for ROX and ACE were in the ranges 92.5–103.8 and 93.0–107.6%, respectively. Compared to the previous methods, this method had a low limit of detection and a good accuracy. As a result, the polymer IL based monolithic column could feasibly be used as a high‐selectivity online SPE sorbent for determining trace macrolide antibiotics in milk. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43943.     

Calcium phosphate incorporated poly(ethylene oxide)‐based nanocomposite electrolytes for lithium batteries. I. Ionic conductivity and positron annihilation lifetime spectroscopy studies

Nanocomposite polymer electrolytes (NCPEs) composed of poly(ethylene oxide), calcium phosphate [Ca₃(PO₄)₂], and lithium perchlorate (LiClO₄)/lithium bis(trifluoromethane sulfonyl)imide [LiN(CF₃SO₂)₂ or LiTFSI] in various proportions were prepared by a hot‐press method. The membranes were characterized by scanning electron microscopy, differential scanning calorimetry, thermogravimetry–differential thermal analysis, ionic conductivity testing, and transference number studies. The free volume of the membranes was probed by positron annihilation lifetime spectroscopy at 30°C, and the results supported the ionic conductivity data. The NCPEs with LiClO₄ exhibited higher ionic conductivities than the NCPE with LiTFSI as a salt. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Modified solution technique for preparing poly(3,4‐ethylenedioxythiophene) and a Poly(3,4‐ethylenedioxythiophene)/silver nanocomposite: Optical and thermal behavior

In this study, we prepared poly(3,4‐ethylenedioxythiophene) (PEDOT) via the chemical oxidation of the 3,4‐ethylenedioxythiophene monomer in a system consisting of miscible binary organic solvents, that is, acetonitrile (CH₃CN) and chloroform (CHCl₃). This successful technique was then used to synthesize a poly(3,4‐ethylenedioxythiophene) (PEDOT)/silver (Ag) nanocomposite as well. In this facile and efficient technique, a higher solubility of the oxidizing reagent, which originated from a relative enhancement in the polarity of the reaction medium, led to significant changes in the optical and thermal behaviors of the resulting products. To investigate the degree of validity of the technique applied, a pure sample of PEDOT (PEDOT I) was also synthesized with CHCl₃ alone, and this was then compared with a sample prepared in CH₃CN/CHCl₃ binary solvents (PEDOT II). To prepare the PEDOT/Ag nanocomposite, first the PEDOT synthesized in binary solvents was thoroughly dissolved in a dimethyl sulfoxide solvent. Next, Ag nanopowder was uniformly dispersed in the previous solution of PEDOT with sonication. The PEDOT/Ag nanocomposite was then precipitated through the addition of a methanol nonsolvent. The approximate size of nano‐Ag within the polymer matrix was found to be about 40 nm. Scanning electron microscopy images of the pure PEDOT II and PEDOT/Ag nanocomposite exhibited an agglomerated sponge and nanospherical homogeneity, respectively. In comparison with PEDOT I, considerable redshifts in the ultraviolet–visible absorption spectra of the pure PEDOT II and PEDOT/Ag nanocomposite were observed. In addition, the thermostability order was found to be PEDOT/Ag > PEDOT II > PEDOT I at all temperatures above 300°C. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2707–2712, 2013     

Characterisation and adsorption properties of oxalate-loaded hematite composite for Cd(II) and Pb(II) adsorption: Equilibrium models,thermodynamic and kinetic studies

In this study, different reagents have been examined to improve the adsorption ability of hematite for the removal of Cd(II) and Pb(II) ions from aqueous solution. The best adsorption result has been obtained using oxalate-loaded hematite. The equilibrium isotherm studies show the best result was attained in the Langmuir model for Pb(II) and Cd(II) ions. Therefore, homogeneous adsorption is dominated, which was emphasised by three-parameter-isotherm models. The experimental data fit well with the pseudo-second-order kinetics. The Pb(II) adsorption was endothermic and spontaneous, but the Cd(II) adsorption was exothermic and unspontaneous.     

Thermal decomposition behavior of carbon‐nanotube‐reinforced poly(ethylene 2,6‐naphthalate) nanocomposites

Polymer nanocomposites based on poly (ethylene 2,6‐naphthalate) (PEN) and carbon nanotubes (CNTs) were prepared by direct melt blending with a twin‐screw extruder. Dynamic thermogravimetric analysis was conducted on the PEN/CNT nanocomposites to clarify the effect of CNTs on the thermal decomposition behavior of the polymer nanocomposites. The thermal decomposition kinetics of the PEN/CNT nanocomposites was strongly dependent on the CNT content, the heating rate, and the gas atmosphere. On the basis of the thermal decomposition kinetic analysis, the variation of the activation energy for thermal decomposition revealed that a very small quantity of CNTs substantially improved the thermal stability and thermal decomposition of the PEN/CNT nanocomposites. Morphological observations demonstrated the formation of interconnected or network‐like structures of CNTs in the PEN matrix. The unique character of the CNTs introduced into the PEN matrix, such as the physical barrier effect of CNTs during thermal decomposition and the formation of interconnected or network‐like structures of CNTs, resulted in the enhancement of the thermal stability of the PEN/CNT nanocomposites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Fabrication and properties of carbon nanotube/styrene–ethylene–butylene–styrene composites via a sequential process of (electrostatic adsorption aided dispersion)‐plus‐(melt mixing)

Carbon nanotube (CNT)/styrene–ethylene–butylene–styrene (SEBS) composites were prepared via a sequential process of (electrostatic adsorption assisted dispersion)‐plus‐(melt mixing). It was found that CNTs were uniformly embedded in SEBS matrix and a low percolation threshold was achieved at the CNT concentration of 0.186 vol %. According to thermal gravimetric analysis, the temperatures of 20% and 50% weight loss were improved from 316°C and 352°C of pure SEBS to 439°C and 463°C of the 3 wt % CNT/SEBS composites, respectively. Meanwhile, the tensile strength and elastic modulus were improved by about 75% and 181.2% from 24 and 1.6 MPa of pure SEBS to 42 and 4.5 MPa of the 3 wt % CNT/SEBS composite based on the tensile tests, respectively. Importantly, this simple and low‐cost method shows the potential for the preparation of CNT/polymer composite materials with enhanced electrical, mechanical properties, and thermal stability for industrial applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40227.     

Ternary nanocomposites based on epoxy,modified silica,and tetrabutyl titanate: Morphology,characteristics, and kinetics of the curing process

In this study, the effects of unmodified nanosilica and nanosilica modified by an isopropyl tri[di(octyl) phosphate] titanate coupling agent (KR-12; m-nanosilica) on the structure, morphology, thermomechanical properties, and kinetics of the curing process of epoxy–tetrabutyl titanate (TBuT) nanocomposites were investigated. The viscosity, tensile strength, and flexural strength of the cured epoxy and cured epoxy–m-silica–TBuT nanocomposites were determined with a Brookfield viscometer and an Instron 5582-100KN universal machine. The morphology and gel fraction content of the nanocomposites were analyzed with transmission electron microscopy and scanning electron microscopy methods and Soxhlet extraction. The viscosity, mechanical properties, gel fraction content, and morphology results of the cured epoxy–m-silica–TBuT nanocomposites confirm that 5 wt % m-nanosilica was the most suitable for improving the dispersion of m-nanosilica in the epoxy matrix and the properties of these materials. The thermal behavior of the nanocomposites was determined by thermogravimetric analysis and differential scanning calorimetry (DSC) methods. On the basis of DSC data, the average value of the activation energy of the cured epoxy–TBuT system, calculated according to Flynn–Wall–Ozawa and Kissinger equations, was 67.893 kJ/mol. The calculation according to the Crane equation showed that the first-order kinetics complied with the curing reaction for the neat epoxy. When we introduced the unmodified nanosilica and modified nanosilica into the epoxy matrix, the order kinetics of the curing reaction for the nanocomposites also followed first-order kinetics, but the activation energy of their curing reaction decreased significantly. Some other properties were also investigated with dynamic mechanical analysis and Fourier transform infrared analysis and are discussed. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47412.     

Aqueous‐solution and solid‐film properties of poly(vinyl alcohol), poly(vinyl pyrrolidone), gelatin,starch, and carboxymethylcellulose polymers

With the density and viscosity results for five polymers—poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP), gelatin (Ge), starch (St), and carboxymethylcellulose (CMC)—measured in aqueous solutions at different temperatures, we have computed the excess molar volumes and activities. Smaller excess molar volumes for PVA solutions are attributed to specific types of interactions, whereas for other polymers, these data are quite large, indicating dispersion‐type interactions. The activity data of the polymer solutions vary widely, depending on the nature of the polymers and their intermolecular interactions. The freestanding film properties of the polymers indicate that Ge and PVA produce stable films, whereas brittle films can be obtained for PVP and St. The mechanical strength properties of PVA and CMC have been found to be suitable for membrane fabrication. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Effects of glucose‐functionalized multiwalled carbon nanotubes on the structural,mechanical, and thermal properties of chitosan nanocomposite films

A series of multiwalled carbon nanotubes (MWCNTs) grafted by chitosan nanocomposite (NC) films were prepared by a direct blending process and solution casting method. In this study, we modified multiwalled carbon nanotubes with glucose (MWCNT–Gl) for this purpose, and the effects of MWCNT–Gl on the structural, mechanical, and thermal properties of chitosan films with different contents of MWCNT–Gl were investigated. The structure, thermal stability, and mechanical properties of the composite were examined by X‐ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, and mechanical testing. The results indicate that the MWCNTs treated by glucose were dispersed well in the chitosan matrix, and the tensile properties of the NC films were improved greatly compared with neat chitosan. Also, with increasing MWCNT–Gl content, the crystalline nature of chitosan decreased. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42022.     

Chemical oxidative grafting of conducting poly(N‐methyl aniline) onto poly(ethylene terepthalate)

Detailed studies on the peroxidisulfate (PDS) initiated graft copolymerization of N‐methyl aniline (NMA) with poly(ethylene terepthalate) (PET) were carried out in p‐tolene sulfonic acid medium under nitrogen atmosphere. Experiments were designed to follow the rate of formation R_h of the poly(N‐methyl aniline (PNMA), simultaneously with the rate of grafting of PNMA onto PET. Effects of concentration of NMA, PDS, PET, time, and temperature on R_h and graft parameters were followed. Kinetic equations were deduced to correlate the changes in the rate with experimental conditions. Graft copolymers were isolated and grafting of PNMA onto PET was confirmed through FTIR, thermogravimetric analysis, and conductivity measurements. Tensile measurements showed that grafting of PNMA did not alter the tensile properties of PET. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 596–605, 2005     

Synthesis and characterization of conducting poly(aniline‐co‐diaminodiphenylsulfone) copolymers

Polyaniline, poly(aniline‐co‐4,4′‐diaminodiphenylsulfone), and poly(4,4′‐diaminodiphenylsulfone) were synthesized by ammonium peroxydisulfate oxidation and characterized by a number of techniques, including infrared spectroscopy, ultraviolet–visible absorption spectroscopy, ¹H‐NMR, thermogravimetric analysis, and differential scanning calorimetry. These copolymers had enhanced solubility in common organic solvents in comparison with polyaniline. The conductivities of the HCl‐doped polymers ranged from 1 S cm^?1 for polyaniline to 10^?8 S cm^?1 for poly(4,4′‐diaminodiphenylsulfone). The copolymer compositions showed that block copolymers of 4,4′‐diaminodiphenylsulfone (r₁ > 1) and aniline (r₂ < 1) formed and that the reactivity of 4,4′‐diaminodiphenylsulfone was greater than that of aniline. The results were explained by the effect of the ? SO₂? group present in the polymer structure. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2337–2347, 2003     

Thermal degradation kinetics of poly(N‐adamantyl‐exo‐nadimide) synthesized by addition polymerization

The thermal decomposition behavior and degradation kinetics of poly(N‐adamantyl‐exo‐nadimide) were investigated with thermogravimetric analysis under dynamic conditions at five different heating rates: 10, 15, 20, 25, and 30°C/min. The derivative thermogravimetry curves of poly(N‐adamantyl‐exo‐nadimide) showed that its thermal degradation process had one weight‐loss step. The apparent activation energy of poly(N‐adamantyl‐exo‐nadimide) was estimated to be about 214.4 kJ/mol with the Ozawa–Flynn–Wall method. The most likely decomposition process was an F1 deceleration type in terms of the Coats–Redfern and Phadnis–Deshpande results. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3003–3009, 2007     

A molecularly imprinted polymer via a salicylaldiminato‐based cobalt(III) complex: A highly selective solid‐phase extractant for anionic reactive dyes

A novel molecularly imprinted polymer based on tert‐butyl acrylate (MIP‐BA) was fabricated with the assistance of a cobalt(III)‐based catalyst bearing an N‐salicylidene isopropylamine ligand [(SPA)₂CoCl]. After initiation with methyl aluminoxane, the catalyst system was found to be active toward the polymerization of tert‐butyl acrylate (t‐BA) in the presence of a polar template (Cibacron reactive red dye) and divinylbenzene (DVB) as a crosslinker. Polymerization experiments, including those of t‐BA, t‐BA, and DVB and t‐BA and dye, were also carried out. Isolated blank polymers and MIP‐BA were analyzed with a variety of techniques, including differential scanning calorimetry, thermogravimetric analysis, gel permeation chromatography, infrared spectroscopy, nuclear magnetic resonance, and ultraviolet–visible spectroscopy. In general, the complex showed moderate polymerization activity and produced high‐molar‐mass poly(tert‐butyl acrylate); however, a decrease in the monomer conversion was observed upon the addition of the dye and/or the crosslinker. The effect of imprinting was obvious when the adsorption capacity of MIP‐BA measured at pH 6 for red dye (the imprinted molecule) was increased from 9.2 to 90.4 mg/g after imprinting. Competitive adsorption studies revealed that the dye‐imprinted polymer enabled the efficient uptake of red dye, even in the presence of blue and yellow dyes that had similar chemical structures to the imprinted molecule. The selectivity coefficients were 43 and 36 with respect to the blue and yellow dyes, respectively. The proposed polymerization procedure could be extended to other anionic polar reactive dyes and polar reactive polymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel heat resistant methyl‐tri(phenylethynyl)silane resin: Synthesis,characterization and thermal properties

Methyl‐tri(phenylethynyl)silane (MTPES) was successfully synthesized by the reaction of lithium phenylacetylide with methyltrichlorosilane. The structure was characterized by HRMS, FTIR, ¹H‐NMR, ¹³C‐NMR, ²⁹Si‐NMR, and elementary analysis. Thermal cure process was monitored by DSC, DMA, and FTIR. MTPES was heated to free flowing liquid around 130°C and thermally polymerized at 327–377°C to form thermoset. Thermal and oxidative properties were evaluated by TGA analysis. Thermoset exhibits extremely high heat‐resistance and TGA curve in nitrogen shows the temperature of 5% weight loss (Td₅) of 695°C and total weight loss at 800°C of 7.1%. TGA shows a high Td₅ of 565°C even in air, although the total weight loss at 800°C was 56.1% of the initial weight, much higher than that in nitrogen. The high heat resistance of MTPES was ascribed to crosslinking reaction concerning ethynyl groups. Aging studies performed at elevated temperatures in air on a thermoset showed that MTPES is oxidatively stable to 300°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2488–2492, 2006     

Synthesis and thermal properties of poly(acrylonitrile‐co‐allyl glycidyl ether)‐graft‐methoxypoly(ethylene glycol) copolymers as novel solid–solid phase‐change materials for thermal energy storage

We synthesized a series of poly(acrylonitrile‐co‐allyl glycidyl ether)‐graft‐methoxypoly(ethylene glycol) (PAA‐g‐MPEG) copolymers as novel polymeric solid–solid phase‐change materials by grafting methoxypoly(ethylene glycol) (MPEG) to the main chain of poly(acrylonitrile‐co‐allyl glycidyl ether) (PAA). PAA was the skeleton, and MPEG was a functional side chain, which stored and released heat during its phase‐transition process. Fourier transform infrared spectroscopy and ¹H‐NMR spectroscopy analysis were performed to investigate the chemical structures. The crystalline morphology and crystal structures were also measured with polarized optical microscopy and X‐ray diffraction. Moreover, the thermal‐energy‐storage properties, thermal stability, and thermal reliability of the PAA‐g‐MPEG copolymers were characterized by differential scanning calorimetry and thermogravimetric analysis (TGA) methods. These analysis results indicate that the MPEG chains were successfully grafted onto PAA, and we found that the PAA‐g‐MPEG copolymers had typical solid–solid phase‐transition temperatures in the range 11–54 °C and high latent heat enthalpies between 44 and 85 J/g. In addition, the as‐prepared PAA‐g‐MPEG copolymers showed reusability and thermal reliability, as shown by the thermal cycle testing and TGA curves. Therefore, the synthesized PAA‐g‐MPEG copolymers have considerable potential for thermal energy storage. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46641.     

Synthesis and characterization of water‐soluble oligosalicylaldehyde‐sulfanilic acid and its Cu(II), Co(II), Pb(II) complexes

This work presents the synthesis and characterization of a new water‐soluble oligophenol derivative, 4‐(2‐hydroxybenzylideneamino)benzenesulfanilic acid (OSAL‐SA) and its metal complexes. The chemical structure of the water‐soluble polymer was characterized by nuclear magnetic resonance (¹H NMR) and Fourier transform infrared (FTIR) spectroscopies and thermogravimetric analyses (TGAs). Pb(II), Cu(II), Co(II) complexes of the polymer were also synthesized in methanol. Characterizations of water insoluble polymer‐metal complexes were performed by FTIR, flame atomic absorption spectroscopy, and TGA. The conductivity measurements of OSAL‐SA and polymer–metal complexes were carried out by the four‐probe technique. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008