Chitosan reinforced with modified CaCO<Subscript>3</Subscript> nanoparticles to enhance thermal,hydrophobicity properties and removal of cu(II) and cd(II) ions

The role of nanoparticles (NPs) in the enhancement of thermal, wettability and adsorption properties of chitosan (CS) was inspired by loading of CaCO₃ modified with diacid (DA) based on L- phenyl aniline (2–8 wt%) within the CS by ultrasound agitation. The diameter of CaCO₃-DA into the CS extended from 40 to 70 nm. A thermal test on the CS/CaCO₃-DA nanocomposite (NC) 2 wt% revealed that T ₅ (temperature with 5% weight loss) was increased up to 312 °C, which is twice the value of the pure polymer. The wettability property of the CS/CaCO₃-DA NCs was transformed from hydrophilicity to hydrophobicity as the CaCO₃-DA NPs concentration was increased. It is due to decrease of the accessibility of the CS polar groups to water. The CS/CaCO₃-DA NC 5 wt% was selected as the adsorbent for uptake of metal ions from the wastewater. It showed maximum adsorption capacity of 21.74 and 29.41 mg.g^?1 for Cu(II) and Cd(II), respectively. These are attributed to strong complexation reaction between the metal ions and functional groups in the obtained NC.     

The utilization of poly(amide-imide)/SiO2 nanocomposite as nanofiller for strengthening of mechanical and thermal properties of poly(vinyl alcohol) nanocomposite films

The present investigation reports the preparation and characterization of the thermally stable poly(vinyl alcohol)/(poly(amide-imide)-SiO₂) nanocomposite (PVA/PAI-SiO₂ NC) films. For this reason, the surface of SiO₂ nanoparticles (NPs) was modified with N-trimellitylimido-l-methionine and subsequently, 5 wt.% of modified SiO₂ NPs were dispersed in the PAI matrix via sonochemical reaction. The resulting NC was studied by different techniques. Finally, the PAI-SiO₂ NC was employed as nanofiller and was incorporated into the PVA matrix for the enhancement of its mechanical and thermal properties. The synthesized NCs were studied by Fourier transform infrared and X-ray diffraction spectroscopy analysis. The surface topography and morphology of the NCs were studied by atomic force microscopy techniques, field emission scanning electron microscopy and transmission electron microscopy. The micrographs demonstrated that the nanofillers were homogeneously dispersed in the PVA matrix. The thermo gravimetric analysis curves indicated that the thermal decomposition of the PVA/PAI-SiO₂ NC films shifted toward higher temperature in comparison with the pure PVA. The effect of nanofiller on the mechanical properties of NC films was also explored.     

Employment of ultrasonic waves for the preparation of PVA/TiO2‐BSA nanocomposites: Mechanical,thermal, and optical properties

The goal of this project is to obtain poly(vinyl alcohol) (PVA)/TiO₂‐bovine serum albumin (BSA) nanocomposite (NC) films in different weight percentages of modified TiO₂. For this purpose, to prevent the accumulation of nanoparticles (NPs) in the PVA matrix, the surface of the TiO₂ NPs was treated with the BSA molecules. To achieve this aim, ultrasonic waves were used as an environmentally friendly and green process that decrease the time of reactions, help better spreading of TiO₂ NPs and maintain dimensions of TiO₂ NPs in the nanoscale range. In the end, the features of the PVA/TiO₂‐BSA NC films were considered with a variety of techniques. The Fourier transform infrared spectroscopy, energy dispersive X‐ray, and X‐ray diffraction showed that the BSA was well placed on the surface of TiO₂ NPs. The thermal gravimetric analysis and UV‐visible results demonstrated that all the PVA/TiO₂‐BSA NC films have better thermal and optical properties than the pure PVA. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46558.     

Effective methodology for the production of novel nanocomposite films based on poly(vinyl chloride) and zinc oxide nanoparticles modified with green poly(vinyl alcohol)

Ultrasonic irradiation and solution dispersion methods were used to organize transparent worthwhile poly(vinyl chloride) (PVC) nanocomposite (NC) films which contain different amounts of modified zinc oxide nanoparticles (NP)s. First, modification of ZnO NPs was accomplished by biocompatible poly(vinyl alcohol) (PVA) to increase NCs compatibility and dispersity in the PVC matrix. The investigation followed by the fabrication and characterization of PVC/ZnO‐PVA NCs which obtained via fast and facile ultrasonication irradiation. The measurements of X‐ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and field emission scanning electron microscopy were used for the characterization of properties, structure and morphology of the obtained NPs and their NCs. Furthermore, thermal and optical properties of the resulting NCs were also carried out by thermogravimetric analysis, ultraviolet‐visible transmission, and absorption spectra. Morphology results demonstrate well‐dispersed characteristics of ZnO‐PVA NPs incorporated in the PVC matrix which resulted from modification. Also, modified ZnO NPs enhanced mechanical properties of prepared NC films. Prepared NCs could be categorized as self‐extinguishing materials on the basis of the limiting oxygen index values. POLYM. COMPOS., 38:1800–1809, 2017. © 2015 Society of Plastics Engineers     

Structural characterization of hydrophilic polymer blends/montmorillonite clay nanocomposites

The nanocomposite films comprising polymer blends of poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP), poly(ethylene oxide) (PEO), and poly(ethylene glycol) (PEG) with montmorillonite (MMT) clay as nanofiller were prepared by aqueous solution casting method. The X‐ray diffraction studies of the PVA–x wt % MMT, (PVA–PVP)–x wt % MMT, (PVA–PEO)–x wt % MMT and (PVA–PEG)–x wt % MMT nanocomposites containing MMT concentrations x = 1, 2, 3, 5 and 10 wt % of the polymer weight were carried out in the angular range (2θ) of 3.8–30°. The values of MMT basal spacing d₀₀₁, expansion of clay gallery width W_cg, d‐spacing of polymer spherulite, crystallite size L and diffraction peak intensity I were determined for these nanocomposites. The values of structural parameters reveal that the linear chain PEO and PEG in the PVA blend based nanocomposites promote the amount of MMT intercalated structures, and these structures are found relatively higher for the (PVA–PEO)–x wt % MMT nanocomposites. It is observed that the presence of bulky ester‐side group in PVP backbone restricts its intercalation, whereas the adsorption behavior of PVP on the MMT nanosheets mainly results the MMT exfoliated structures in the (PVA–PVP)–x wt % MMT nanocomposites. The crystallinities of the PEO and PEG were found low due to their blending with PVA, which further decreased anomalously with the increase of MMT concentration in the nanocomposites. The decrease of polymer crystalline phase of these materials confirmed their suitability in preparation of novel solid polymer nanocomposite electrolytes. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40617.     

Fabrication and characteristics of graphene oxide/nanocellulose fiber/poly(vinyl alcohol) film

Poly(vinyl alcohol) (PVA), PVA/nanocellulose fiber (CNF), and PVA/CNF/graphene oxide (GO) films were prepared simply by casting stable aqueous mixed solutions. FTIR investigation indicated that hydrogen bonding existed between the interface of GO and PVA‐CNF. Scanning electron microscopy and X‐ray diffraction analysis showed that GO was uniformly dispersed in PVA‐CNF matrix. Introducing CNF into PVA caused a significant improvement in tensile strength, and further incorporating GO into PVA/CNF matrix led to a further increase. The tensile strength of the neat PVA film, PVA/CNF composite, and PVA/CNF/GO film (0.6 wt % GO) was 43, 69, and 80 MPa, respectively. Moreover, when incorporating 8 wt % CNF into PVA matrix, O₂ permeability and water absorption decreased from 13.36 to 11.66 cm³/m²/day and from 164.2% to 98.8%, respectively. Further adding 0.6 wt % GO into PVA/CNF matrix resulted in a further decrease of permeability and water absorption to 3.19 cm³/m²/day and 91.2%, respectively. Furthermore, for all composite samples, the transmittance of visible light was higher than 67% at 800 nm. CNF and GO‐reinforced PVA with high mechanical and barrier properties are potential candidates for packaging industry. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45345.     

Enhancement of the mechanical properties and thermostability of poly(vinyl alcohol) nanofibers by the incorporation of sodium chloride

The mechanical properties and thermostability of poly(vinyl alcohol) (PVA) nanofiber mats have been obviously improved by the incorporation of sodium chloride (NaCl). The tensile properties including tensile strength and modulus of membranes with an addition of 1.0 wt % NaCl increased from 2.51 to 4.22 MPa and 33.0 to 176.30 MPa, respectively, more than 160 and 700% of those of the electrospun pure PVA membranes. Moreover, thermogravimetric analysis showed that the initial decomposition temperature (T_i) and the half decomposing temperature (T_50%) of PVA nanofibers with the addition of NaCl were at least 26 and 59 °C higher than that of pure PVA nanofibers, respectively, indicating a strong interaction between the PVA and the salt ions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45981.     

A straightforward preparation and characterization of novel poly(vinyl alcohol)/organoclay/silver tricomponent nanocomposite films

In the present investigation, novel poly(vinyl alcohol)/organoclay/silver (PVA/OMMT/Ag) tricomponent nanocomposite (NC) films with different compositions were prepared by solution intercalation method under ultrasonic irradiation process. The NC films were obtained by mixing a colloidal solution consisting of Ag nanoparticles (NPs) (3, 5, 7 and 9 wt%) with a water solution of PVA and OMMT (10 wt%) via solution casting method. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction, Fourier transform infrared spectroscopy, and thermogravimetric analysis (TGA) were utilized to characterize the morphology and properties of the PVA/OMMT/Ag NC films. TGA confirmed that the heat stability of the nanocomposite was improved. The enhancement in the thermal properties of the hybrid materials was due to strong hydrogen bonding between OH groups of PVA, free acid functionalized groups of OMMT, and the Ag NPs. SEM and TEM results also showed that the OMMT and Ag NPs were dispersed homogeneously in the PVA matrix on nanoscale.     

Structural,Dielectric Permittivity and Optical Characteristics of Casting Poly Vinyl Alcohol/Calcium Nickel Aluminate Nanocomposite Films

Triplex hybrid nanofiller (CaNiAl₂O₅) have been synthesized by sol-gel method and its nanocomposite (NC) films were incorporated with poly vinyl alcohol (PVA). The scanning electron microscopy (SEM) was used to probe morphological behaviors and dispersion of CaNiAl₂O₅ in PVA matrix. In order to probe the microstructure X-ray diffraction (XRD) and FTIR were performed on PVA/CaNiAl₂O₅ NCs. Based on the results of both XRD and transmission electron microscopy (TEM), the average particle size of the CaNiAl₂O₅ lies in the range 7–15 nm. The current (I) – voltage (V) behaviors were studied using LCR-meter at room temperature. The dc-conductivity increases with increasing in both CaNiAl₂O₅ at different voltages. The dielectric constant exhibits higher values at lower frequency and increases with nanoparticle (NP) loading due to increase in polarization particles in polymer matrix. The ac conductivity tends to increase with increase frequency and NPs content. The cyclic voltammetric data indicate the NC with 8wt% NPs exhibit higher specific capacitance as compared with PVA. The optical constants of the NCs were evaluated from UV-Visible spectra. The band gap energies has a blue shift from 4.4 eV (PVA) to 2.8 eV (PVA/8wt% CaNiAl₂O₅), whereas refractive index (RI) and the optical conductivity of NCs increased with an increasing in NPs content.     

Preparation of PMMA grafted calcium carbonate whiskers and its reinforcement effect in PVC

In this study, calcium carbonate (CaCO₃) whiskers were grafted with poly(methyl methacrylate) (PMMA) by in situ emulsion polymerization using γ‐methacryloxy propyl trimethoxyl silane (γ‐MPS) as a coupling agent, and the properties of resultant whisker were determined using Fourier transform infrared (FTIR) spectroscopy, energy dispersive spectroscopy (EDS), X‐ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The results show that PMMA has been successfully grafted onto the surface of CaCO₃ whiskers and the maximum grafting degree (Gd) is 3.75%. The scanning electron microscopy (SEM) micrographs of the tensile‐fractured surfaces show that modified CaCO₃ whiskers have strong interfacial adhesion to the poly(vinyl chloride) (PVC) matrix. The tensile strength increases from 44.0 MPa for PVC composite with unmodified whisker to 49.5 MPa for that with grafted whisker. The dynamic mechanical analysis (DMA) and TGA results indicate that the composites reinforced by modified CaCO₃ whiskers have much higher modulus, glass transition temperature, and better thermal stability than their counterparts reinforced by unmodified CaCO₃ whiskers. POLYM. COMPOS., 38:2753–2761, 2017. © 2015 Society of Plastics Engineers     

Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites

ABSTRACT

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO₂) nanoparticles (NP_S) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO₂ nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO₂ nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO₂ NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO₂ nanocomposite films as low cost, lightweight and flexible material for EMI shielding.     

Impact of nano-perovskite La2CuO4 on dc-conduction,opto-electrical sensing and thermal behavior of PVA nanocomposite films

ABSTRACT

Nanocomposite (NC) films of poly vinyl alcohol (PVA) incorporated with varying amounts of perovskite lanthanum cuprate (La₂CuO₄) nanoparticles (NPs) have been fabricated by solution intercalation technique. TEM result showed the size of NPs between 91-134nm. The effects of NPs content on structural and morphological behaviors of PVA have been established by XRD, FTIR and SEM methods. Electrical properties of NC films were performed using LCR-meter. Current (I)–voltage (V) data displayed dc-conductivity increased with increasing NPs content and trends of I–V indicate the dominant Ohmic behavior at voltage <5V and above that Poole–Frenkel emission is the dominant conduction mechanism. Ac-conductivity increases with increase in frequency and dosage of NPs. The maximum ac-conductivity obtained in this investigation is 2.43X10^?5S/cm for PVA/2wt% La₂CuO₄ with lowest activation energy of 0.147 eV at 25^°C. Cyclic voltammetry (CV) revealed the specific capacitance of PVA-NC improved compared to pristine PVA. The reduction in T_g with increment NPs contents was observed. The optical behaviors of NCs were deduced by UV-visible spectroscopy where the result showed band gap energy was reduced from 5.23eV to 3.25eV whereas refractive index increased from 1.71 to 2.44 for pure PVA and PVA/2wt%La₂CuO₄, respectively.     

Preparation and characterization of reinforced poly(vinyl alcohol) films by a nanostructured,chiral, L-leucine based poly(amide-imide)/ZrO2 nanocomposite through a green method

In the present investigation, at first, the surface of ZrO₂ nanoparticles was modified with a bioactive and biocompatible diacid based on leucine amino acid as a coupling agent. The grafting of diacid on the surface of ZrO₂ was confirmed by Fourier transform infrared spectroscopy and thermogravimetric analysis. Then, the synthesis of poly(amide-imide)/ZrO₂ nanocomposite (PAI/ZrO₂ NC) was performed through ultrasonic technique. The obtained NCs demonstrated good thermal stability. Field emission scanning electron microscopy and transmission electron microscopy analysis showed that the average diameter of NP was around 15–20 nm. Finally, the resulting NC, was used as a nano-filler and was incorporated into the poly(vinyl alcohol) (PVA) in order to improve its mechanical and thermal properties. The PVA/PAI–ZrO₂ NC films were characterized by different techniques. The data indicated that the thermal and mechanical properties of the PVA/PAI–ZrO₂ NC were enhanced. It was attributed to the good dispersion of filler into the PVA matrix as a result of hydrogen bonding.     

Preparation of transparent PVA/TiO2 nanocomposite films with enhanced visible-light photocatalytic activity

Polymer/semiconductor oxide nanocomposite films have been intensively investigated for various applications. In this work, we reported a simple hydrothermal method to fabricate highly transparent poly(vinyl alcohol)/titanium dioxide (PVA/TiO₂) nanocomposite films with enhanced visible-light photocatalytic activity. The as-prepared PVA/TiO₂ nanocomposite films showed high optical transparency in the visible region even at a high TiO₂ content (up to 40 wt.%). The determination of photocatalytic activity by photodegradation of methyl orange (MO) and colorless phenol showed that PVA/TiO₂ nanocomposite films exhibited enhanced visible-light photocatalytic activity and excellent recycle stability. This work provided new insights into fabrication of polymer/TiO₂ nanocomposites as high performance photocatalysts in waste water treatment.     

Structural characteristics of poly(vinyl alcohol)–calcium carbonate composites prepared by sequential method

Abstract

Composites of poly(vinyl alcohol) (PVA) and calcium carbonate (CaCO₃) were prepared by a sequential method involving first in situ synthesis of CaCO₃ in PVA solution, then physical crosslinking of synthetic suspension and subsequently washing of resultant elastic gel followed by consolidation. The phase and composition, mechanical properties and microstructure of the composites and possible molecular interactions between both components were evaluated. X-ray diffraction analysis revealed that calcium carbonate was mainly composed of aragonite and calcite. Compression tests confirmed the composites prepared by this sequential method had good mechanical properties and that the compressive strength of the composites increased with higher content of calcium carbonate. PVA formed an interconnected network and needle-like CaCO₃ crystals together with some fine grains were well compatible with PVA. In situ synthesis induced a spectral shift of hydroxyl groups and C–O bonds of PVA and the suppression of the characteristic adsorption of calcite was also observed, according to Fourier transform infrared spectroscopy measurements.     

Improvement of glycerin removal from crude biodiesel through the application of a sulfonated polymeric adsorbent material

The proposal of suitable processes for glycerin removal from crude biodiesel is an important task for making the overall biodiesel production process environmentally friendly and economically viable. In this article, we propose a dry purification process for biodiesel treatment with different polymeric materials [chitosan, cellulose acetate, poly(vinyl alcohol) (PVA), and sulfonated PVA]. Except for pure PVA, all of the proposed materials were able to reduce the free glycerin content of crude biodiesel from 0.03 wt % to values lower than 0.02 wt %. When the PVA was sulfonated, the glycerin removal increased from 12 to 82% compared that of pure PVA. The glycerin content in the biodiesel sample treated with sulfonated PVA was 0.0055 wt %. Mid‐IR spectrometric analysis showed that the sulfonation of PVA increased the band due to H? O? H stretching vibrations; this enabled greater hydrogen bonding between glycerol and the ? SO₃? groups of the sulfonated adsorbent. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45330.     

Synthesis and photocatalytic performance of PVA/TiO2/graphene‐MWCNT nanocomposites for dye removal

TiO₂/graphene‐MWCNT nanocomposite was prepared using solvothermal reaction for the effective distribution of TiO₂ nanoparticles on carbonaceous materials. TiO₂/graphene‐MWCNT nanocomposite was immobilized in poly(vinyl alcohol) (PVA) matrix for a convenient recovery after wastewater purification. MWCNT was incorporated in a nanocomposite not only to prevent the restacking of graphene but also to increase the electron transfer from TiO₂. The detailed characterization of the nanocomposite was performed using SEM, EDX, XRD, XPS, and FTIR. The photocatalytic performance of PVA/TiO₂/graphene‐MWCNT nanocomposite was investigated by UV spectroscopy on the basis of degradation of organic pollutants. PVA/TiO₂/graphene‐MWCNT nanocomposite showed improved photocatalytic decomposition of more than 70% of residual dye left in case of using PVA/TiO₂/graphene nanocomposite due to the improved electron transfer and the higher adsorption of organic pollutants. PVA/TiO₂/graphene‐MWCNT nanocomposite was suitable as a promising material for the recyclable photocatalytic wastewater purification system. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40715.     

Electrospinning fabrication and characterization of poly(vinyl alcohol)/layered double hydroxides composite fibers

Nanofibers of poly(vinyl alcohol) (PVA)/layered double hydroxide (Mg‐Al LDH) composites are prepared by the electrostatic fiber spinning using water as the solvent at a high voltage of 21 kV. Either inorganic LDH carbonate (LDH‐CO₃) or L ‐lactic acid‐modified LDH (Lact‐LDH) is used for incorporating with PVA. Scanning electron microscopy SEM investigations on the nanofibers suggest that the average diameters of PVA/LDH composite fibers are smaller than that of neat PVA. Transmission electron microscopy (TEM) investigations indicate that the dispersity of the LDH in PVA matrix is much improved after modification with L ‐lactic acid. The mechanical properties of the PVA/LDH fibers are obviously enhanced compared to that of neat PVA. For example, the tensile stress and elongation at break of the PVA/Lact‐LDH electrospun fibrous mat with 5 wt % Lact‐LDH are 31.7 MPa and 36.7%, respectively, which are significantly higher than those of neat PVA, and also higher than those of PVA/LDH‐CO₃ owing to the better dispersity of Lact‐LDH nanoparticles. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Surface coating of α-Al2O3 nanoparticles with poly(vinyl alcohol) as biocompatible coupling agent for improving properties of bio-active poly(amide-imide) based nanocomposites having l-phenylalanine linkages

Nanocomposites (NCs) containing metal oxide nanoparticles (NPs) as fillers are used in a wide range of applications and in various fields. Poly(vinyl alcohol) (PVA) is an attractive polymer because of its many desirable applications and characteristics. In this investigation, at first, the surface of alumina (α-Al₂O₃) NPs was modified with PVA as a biocompatible modifier. Then, the optically active poly(amide-imide) (PAI) nanostructure was prepared by using molten tetrabutylammonium bromide as a molten ionic liquid and triphenyl phosphite as the condensing agent. Finally, the modified α-Al₂O₃ (α-Al₂O₃-PVA) NPs were incorporated into the PAI matrix for the preparation of PAI/Al₂O₃-PVA NCs (PAPNCs). To investigate effect and nature of coating on the surface of the α-Al₂O₃ NPs and preparation of PAPNCs, the samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. The surface morphology examination demonstrated the monodispersed characteristics of α-Al₂O₃ NPs after surface modification with the PVA and incorporation into the PAI matrix.     

Self-cleaning antireflected surfaces based on treated PEO/SiO2 nanocomposite films

In this study, the polyethylene oxide (PEO)/SiO₂ nanoparticles (NPs) nanocomposite films with various SiO₂ NPs concentrations were prepared using an in situ formation of NPs in the polymer matrix for self-cleaning antireflected surface applications. The effect of SiO₂ NPs in PEO/SiO₂ NPs nanocomposite films on the structural, morphological, chemical, thermal, optical, and electrical properties of PEO/SiO₂ NPs nanocomposite films was performed. According to the x-ray diffraction and the differential scanning calorimetry analysis, the crystallinity degree of the nanocomposite films decreases by increasing the SiO₂ NPs concentrations. The bandgap energy of PEO/SiO₂ NPs nanocomposite films decreases from 3.95 to 3.55 eV as the SiO₂ NPs concentration increases up to 10 wt.%. The average electrical conductivity of the PEO/SiO₂ NPs nanocomposite films increases from 5.1 × 10⁻⁷ to 2.0 × 10⁻⁶ S/cm as the SiO₂ NPs concentration increases up to 10 wt.%. The refractive index decreases to 1.64 at 550 nm for the PEO/SiO₂ NPs nanocomposite films with 10 wt.% of SiO₂ NPs, and the water contact angle decreases to around 0° after thermal treatment, which confirms that the PEO/SiO₂ NPs nanocomposite films can be used as self-cleaning antireflected surfaces.