High‐performance fibers based on copolyimides containing benzimidazole and ether moieties: Molecular packing,morphology, hydrogen‐bonding interactions and properties

High‐performance copolyimide (co‐PI) fibers were prepared via the wet spinning process of co‐polyamide acid precursors based on 3,3′,4,4′‐biphenyldianhydride (BPDA) and a mixture of three diamines namely p‐phenylene diamine (p‐PDA), 2‐(4‐aminophenyl)‐5‐aminobenzimidazole (BIA), and 4,4′‐oxidianiline (ODA), followed by drawing and imidization at high temperatures. Effects of the ODA and BIA contents on the molecular packing, morphology, hydrogen‐bonding interactions, mechanical and thermal properties of the prepared fibers were investigated. The mechanical properties of the co‐PI fibers were improved with the addition of ODA and BIA, and they reached the optimum tensile strength of 2.7 GPa and modulus of 94.3 GPa. Wide‐angle X‐ray diffraction results (WAXD) showed that the co‐PI fibers exhibited highly oriented structure along the fiber direction with low degree of lateral packing orders in the transverse direction. Two‐dimensional small‐angle X‐ray scattering (2D‐SAXS) revealed that the incorporation of ODA resulted in the reduction in radius, length, misorientation, and internal surface roughness of the microvoids in the fibers. Fourier transform infrared (FTIR) results indicated that hydrogen‐bonding formed between the BIA and cyclic imide units effectively strengthened the intermolecular interactions. The co‐PI fibers exhibited excellent thermal and thermal‐oxidative stability, with a 5%‐weight‐loss temperature of 578°C under N₂ and 572°C in air. POLYM. ENG. SCI., 55:2615–2625, 2015. © 2015 Society of Plastics Engineers     

Synthesis and characterization of ternary‐copolymer of soluble fluorinated polyimides based on 1,4‐bis (4‐amino‐2‐trifluoromethylphenoxy) benzene

A series of novel ternary‐copolymer of fluorinated polyimides (PIs) were prepared from 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzene (pBATB), commercially available aromatic dianhydrides, and aromatic diamines via a conventional two‐step thermal or chemical imidization method. The structures of all the obtained PIs were characterized with FTIR, ¹H‐NMR, and element analysis. Besides, the solubility, thermal stability, mechanical properties, and moisture uptakes of the PIs were investigated. The weight‐average molecular weight (M_w) and the number‐average molecular weight (M_n) of the PIs were determined using gel‐permeation chromatography (GPC). The PIs were readily dissolved not only in polar solvents such as DMF, DMAc, and NMP, but also in some common organic solvents, such as acetic ester, chloroform, and acetone. The glass transition temperatures of these PIs ranged from 201 to 234°C and the 10% weight loss temperatures ranged from 507 to 541°C in nitrogen. Meanwhile, all the PIs left around 50% residual even at 800°C in nitrogen. The GPC results indicated that the PIs possessed moderate‐to‐high number‐average molecular weight (M_n), ranging from 9609 to 17,628. Moreover, the polymer films exhibited good mechanical properties, with elongations at break of 8–21%, tensile strength of 66.5–89.8 MPa, and Young's modulus of 1.04–1.27 GPa, and low moisture uptakes of 0.54–1.13%. These excellent combination properties ensure that the polymer could be considered as potential candidates for photoelectric and microelectronic applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fluorescent,electroactive, thermally stable triphenylamine‐ and naphthalene‐based polyimides for optoelectronic applications

To tune the photophysical properties of polyimides (PIs), a diamine containing naphthalene and triphenylamine units, N¹‐(4‐aminophenyl)‐N¹‐[(4‐naphthalene‐2‐yloxy)phenyl]benzene‐1,4‐diamine (DA), was synthesized. A series of fluorescent electroactive new PIs from synthesized DA were prepared with conventional thermal imidization with dianhydride. The selected dianhydride were used to study and compare the effects of rigid planar phenyl, flexible phenoxy, and nonplanar flexible hexafluoroisopropyidene and carbonyl groups in the main polymer backbone on the optoelectronic properties and processability of materials. The structures of the synthesized diamine and its PIs were evaluated by spectral and CHNS elemental analysis. The optoelectronic and thermal properties of PIs revealed intense blue‐light emission (428–477 nm), a low oxidation potential (0.3–1.3 V), and a lower highest occupied molecular orbital–lowest unoccupied molecular orbital gap (2.92–3.21 eV). The observed behavior and properties of our synthesized PIs suggest their potential as future hole‐transport materials in optoelectronic applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44526.     

The β‐δ‐Phase Transition and Thermal Expansion of Octahydro‐1,3,5,7‐Tetranitro‐1,3,5,7‐Tetrazocine

Phase behavior of octahydro‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocine (HMX) is investigated by X‐ray powder diffraction (XRD). The XRD patterns at elevated temperature show that there is a co‐existing temperature range of β‐ and δ‐phase during the phase transition process. Additionally, mechanical forces can catalyze the conversion from δ‐ back to β‐phase. Based on the diffraction patterns of β‐ and δ‐phase at different temperatures, we calculate the coefficients of thermal expansion by Rietveld refinement. For β‐HMX, the linear coefficients of thermal expansion of a‐axis and b‐axis are about 1.37×10⁻⁵ and 1.25×10⁻⁴ °C⁻¹. A slight decrease in c‐axis with temperature is also observed, and the value is about −0.63×10⁻⁵ °C⁻¹. The volume coefficient of thermal expansion is about 1.60×10⁻⁴ °C⁻¹, with a 2.2% change from 30 to 170 °C. For δ‐HMX, the linear coefficients of thermal expansion of a‐axis and c‐axis are found to be 5.39×10⁻⁵ and 2.38×10⁻⁵ °C⁻¹, respectively. The volume coefficient of thermal expansion is about 1.33×10⁻⁴ °C⁻¹, with a 2.6% change from 30 to 230 °C. The results indicate that β‐HMX has a similar volume coefficient of thermal expansion compared with δ‐HMX, and there is about 10.5% expansion from β‐HMX at 30 °C to δ‐HMX at 230 °C, of which about 7% may be attributed to the reconstructive transition.     

Polyacrylonitrile‐based proton conducting membranes containing sulfonic acid and tetrazole moieties

Proton conducting membranes based on polymers containing sulfonic acid and tetrazole moieties were developed. Successful syntheses of poly(acrylonitrile‐co ‐styrene sulfonic acid) (PAN‐co ‐PSSA), poly(acrylonitrile‐co ‐5‐vinyl tetrazole) (PAN‐co ‐PVTz), and poly(acrylonitrile‐co ‐5‐vinyl tetrazole‐co ‐styrene sulfonic acid) (PAN‐co ‐PVTz‐co ‐PSSA) were confirmed by ¹H‐nuclear magnetic resonance spectroscopy, elemental analysis, and Fourier transform infrared spectroscopy. Two approaches were performed to study the effects of molar ratio of sulfonic acid to tetrazole and tetrazole content on membrane properties. In the first approach, PAN‐co ‐PSSA was blended with PAN‐co ‐PVTz at three molar ratios. The second approach focused on PAN‐co ‐PVTz‐co ‐PSSA membranes with various tetrazole contents. PAN‐co ‐PSSA membrane was also prepared. All solution‐cast membranes were hydrolytically stable, except for PAN‐co ‐PVTz‐co ‐PSSA with 71% tetrazole. Surface morphologies of blend membranes were studied using scanning electron microscopy, and no phase separation was observed. Water uptake was shown to increase with increasing tetrazole. All membranes exhibited high thermal stability (up to 250 °C) and high storage moduli. Proton conductivity was found to depend significantly on relative humidity. The influences of sulfonic acid to tetrazole ratio and tetrazole content on proton conduction were observed and discussed. A maximum proton conductivity of 7.1 × 10^?3 S/cm at 26 °C was obtained from PAN‐co ‐PSSA membrane. In addition, all tested membranes showed relatively good oxidative stability after treatment in Fenton's reagent. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45411.     

Incorporating bis‐benzimidazole into polyimide chains for effectively improving thermal resistance and dimensional stability

Heteroaromatic 6,6′‐bis[2‐(4‐aminobenzene)benzimidazole] and its corresponding copolyimides were synthesized to produce high temperature resistant polyimides (PIs). Due to the rigidity and aromaticity of heterocyclic bis‐benzimidazole, and the increased hydrogen bonding interactions, these PIs were found to have a high glass transition temperature (T_g) over 457 °C, which also guarantees a better dimensional stability with a coefficient of thermal expansion (CTE) lower than 10 ppm K^?1 in a wider temperature range of 50–400 °C. In addition, the PIs exhibit excellent thermal stability (5% weight loss temperature higher than 559 °C) along with outstanding mechanical properties. This study demonstrates the viability to access PIs with ultrahigh T_g and low CTE in a wider range of temperature by the incorporation of bis‐benzimidazole moieties. © 2019 Society of Chemical Industry     

Synthesis of crosslinkable fluorinated linear‐hyperbranched copolyimides for optical waveguide devices

A series of novel crosslinkable fluorinated linear‐hyperbranched copolyimides (co‐FHBPIs) were prepared by condensation of 1,3,5‐tris(2‐trifluoromethy‐4‐aminopheoxy) benzene (TFAPOB), 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy) benzene (6FAPB), and 4,4′‐(2‐(3′,5′‐ditrifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (6FPDA) with different feed ratio, which followed by reaction with 3‐ethynylaniline. Under this circumstance, as the TFAPOB/6FAPB ratio increases, the T_g of the polymers decreases gradually from 218 to 199°C, and the Young's moduli decreases from 2.14 to 1.64 GPa. Although, the refractive indices are adjustable in the ranges of 1.5755–1.5631, and the polymer birefringences decrease from 0.0122 to 0.0012 at wave length 650 nm. The polymer films were fabricated by spin‐coating and crosslinked by thermal curing. The cured films have good resistance to common organic solvents such as acetone, tetrahydrofuran, N, N‐dimethylformamide, dimethyl sulfoxide, and chloroform. The glass transition temperature of E‐coFHBPI 50 (the TFAPOB/(6FAPB+ TFAPOB) ratio is 50%)changes from 200 to 243°C after curing, which shows higher thermal stability up to 582°C (5% weight loss). Rib‐type optical waveguide device is fabricated by E‐coFHBPI 50, which demonstrates an obvious near‐field mode pattern of the waveguide. All the results indicated that the polymers are promising candidates for optical waveguide materials. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of soluble and thermally stable polyimides from 3,5‐diamino‐N‐(4‐(8‐quinolinoxy) phenyl) aniline and various dianhydrides

Three novel polyimides (PIs) having pendent 4‐(quinolin‐8‐yloxy) aniline group were prepared by polycondensation of a new diamine with commercially available tetracarboxylic dianhydrides, such as pyromellitic dianhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and bicyclo[2.2.2]‐oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride. These PIs were characterized by FTIR, ¹H NMR, and elemental analysis; they had high yields with inherent viscosities in the range of 0.4–0.5 dl g⁻¹, and exhibited excellent solubility in many organic solvents such as N,N‐dimethyl acetamide, N,N′‐dimethyl formamide, N‐methyl pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. These PIs exhibited glass transition temperatures (T_g) between 250 and 325° C. Their initial decomposition temperatures (T_i) ranged between 270 and 450°C, and 10% weight loss temperature (T₁₀) up to 500°C with 68% char yield at 600°C under nitrogen atmosphere. Transparent and hard polymer films were obtained via casting from their NMP solutions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Organosoluble and light‐colored fluorinated polyimides based on 1,1‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐1‐phenylethane and various aromatic dianhydrides

To investigate the CF₃ group affecting the coloration and solubility of polyimides (PI), a novel fluorinated diamine 1,1‐bis[4‐(4‐amino‐2‐ trifluoromethylphenoxy)phenyl]‐1‐phenylethane (2) was prepared from 1,1‐ bis(4‐hydrophenyl)‐1‐phenylethan and 2‐chloro‐5‐nitrobenzotrifluoride. A series of light‐colored and soluble PI 5 were synthesized from 2 and various aromatic dianhydrides 3a–f using a standard two‐stage process with thermal 5a– f(H) and chemical 5a–f(C) imidization of poly(amic acid). The 5 series had inherent viscosities ranging from 0.55 to 0.98 dL/g. Most of 5a–f(H) were soluble in amide‐type solvents, such as N‐methyl‐2‐pyrrolidone (NMP), N,N‐ dimethylacetamide (DMAc), and N,N‐dimethylformamide (DMF), and even soluble in less polar solvents, such as m‐Cresol, Py, Dioxane, THF, and CH₂Cl₂, and the 5(C) series was soluble in all solvents. The GPC data of the 5a–f(C) indicated that the Mn and Mw values were in the range of 5.5–8.7 × 10⁴ and 8.5–10.6 × 10⁴, respectively, and the polydispersity index (PDI) Mw /Mn values were 1.2–1.5. The PI 5 series had excellent mechanical properties. The glass transition temperatures of the 5 series were in the range of 232–276°C, and the 10% weight loss temperatures were at 505–548 °C in nitrogen and 508–532 °C in air, respectively. They left more than 56% char yield at 800°C in nitrogen. These films had cutoff wavelengths between 356.5–411.5 nm, the b* values ranged from 5.0–71.1, the dielectric constants, were 3.11–3.43 (1MHz) and the moisture absorptions were in the range of 011–0.40%. Comparing 5 containing the analogous PI 6 series based on 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐ phenylethane (BAPPE), the 5 series with the CF₃ group showed lower color intensity, dielectric constants, and better solubility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2399–2412, 2005     

Thermal stability and dynamic mechanical behavior of exfoliated graphite nanoplatelets‐LLDPE nanocomposites

The objective of this research was to investigate thermal stability and dynamic mechanical behavior of Exfoliated graphite nanoplatelets (xGnP™)‐Linear Low‐Density Poly Ethylene (LLDPE) nanocomposites with different xGnP loading content. The xGnP‐LLDPE nanocomposites were fabricated by solution and melt mixing in various screw rotating systems such as co‐, counter‐, and modified‐corotating. The storage modulus (E′) of the composites at the starting point of −50°C increased as xGnP contents increased. E′ of the nanocomposite with only 7 wt% of xGnP was 2.5 times higher than that of the control LLDPE. Thermal expansion and the coefficient of thermal expansion of xGnP‐loaded composites were much lower than those of the control LLDPE in the range of 45–80°C (299.8 × 10⁻⁶/°C) and 85–100°C (365.3 × 10⁻⁶/°C). Thermal stability of the composites was also affected by xGnP dispersion in LLDPE matrix. The xGnP‐LLDPE nanocomposites by counter‐rotating screw system showed higher thermal stability than ones by co‐rotating and modified‐co‐rotating system at 5 wt% and 12 wt% of xGnP. xGnP had a great effect on high thermal stability of xGnP‐LLDPE composites to be applied as tube and film for electrical materials. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Preparation and characterization of organosoluble copolyimides based on a pair of commercial aromatic dianhydride and one aromatic diamine, 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene,series

A series of copolyimides (co‐PIs) with high molecular weights, excellent mechanical properties, heat‐resistant properties, and good solubilities in organic solvents were synthesized from six kinds of commercial dianhydrides (IIa–f) and 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene (I). Monomers (IIa–d) for synthesizing insoluble PIs and monomers (IIe,f) for synthesizing soluble PIs were used to synthesize co‐PIs with arbitrary solubilities. Nine kinds of soluble co‐PIs (IIIa–e and IVa–d) were synthesized through chemical or thermal cyclodehydration. These co‐PIs were found to be easily soluble as well as able to be processed by casting from their solutions such as NMP, DMAc, m‐cresol, pyridine, THF, and CH₂Cl₂. The easily dissolved characteristics of this series of co‐PIs stemmed from the t‐butyl group and ether group within I. Besides, when the used dianhydride molecules contained the organosoluble groups, the solubilities in organic solvents could be greatly enhanced. The co‐PIs could improve the processability of polymers, while increasing their flexible mechanical properties and maintaining their excellent heat‐resistant properties. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 87–95, 2000     

Solution‐processable colorless polyimides with ultralow coefficients of thermal expansion for optoelectronic applications

This work reports colorless polyimides (PIs) that are applicable as plastic substrates in image display devices, which produce an ultralow coefficient of thermal expansion (CTE) by solution casting without thermal imidization and mechanical stretching. An effective monomer molecular design is proposed for this purpose. Chemical imidization (CI) process compatibility is the key factor in attaining the target properties. We focused on a PI system derived from 1,2,3,4‐cyclobutanetetracarboxylic dianhydride (CBDA) and a novel para‐amide‐linked diamine (AB‐TFMB) with CF₃ groups as it has great potential as an ultralow CTE material, although it offers no CI process compatibility because of its poor solubility. The CBDA/AB‐TFMB system was modified by copolymerizing with 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride. This approach drastically improved CI process compatibility. The CTE of the PI films linearly decreased with increasing CBDA content. At a CBDA content of 70 mol%, the PI achieved an ultralow CTE of 7.3 ppm K^?1, non‐coloration/non‐turbidity, a very high glass transition temperature of 329 °C and sufficient ductility. The ultralow CTE results from the highly oriented main chains along the X–Y direction during the casting process as supported by the very high birefringence exceeding 0.1. Thus, our materials almost achieved the target properties required for novel coating‐type high‐temperature plastic substrate materials. © 2016 Society of Chemical Industry     

Preparation and properties of organosoluble,colorless, and high‐pretilt‐angle polyimides based on an alicyclic dianhydride and long‐main‐chain alkyl‐group‐containing diamines

Alicyclic polyimides (PIs) were prepared from 3‐carboxylmethyl‐cyclopentane‐1,2,4‐tricarboxylic acid dianhydride and α,ω‐di(4‐aminophenoxyl)alkanes. These PIs possessed good solubility in aprotic, strongly polar solvents such as N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethyl formamide, and m‐cresol. They possessed high transparency in visible wavelengths and were almost colorless. The pretilt angle of a liquid‐crystal display with these PIs as the alignment layer increased linearly as the length of the alkyloxy groups increased; it was close to 5° for the PI samples PI‐10 and PI‐12. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2814–2820, 2001     

Synthesis and characterization of organo‐soluble fluorinated polyimides

A novel fluorinated diamine monomer with a keto group, 4‐[4‐amino‐2‐trifluoromethyl phenoxy]‐4′‐[4‐aminophenoxy]benzophenone (ATAB) was prepared by reacting dihydroxybenzophenone with 4‐chloronitrobenzene and 2‐chloro‐5‐nitrotrifluoromethylbenzene in the presence of potassium carbonate followed by catalytic reduction with palladized carbon (10%). Fluorinated polyimides IVa–e were synthesized from the diamine mentioned above via a two‐step method (thermal and chemical imidization). Polyimides IVa–e have inherent viscosities in the range 0.65–1.06 dL g^?1 (thermal imidization) and 0.82–1.56 dL g^?1 (chemical imidization). The polyimides prepared by chemical imidization exhibit excellent solubility. Polyimide films exhibit tensile strength, elongation and tensile modulus in the ranges 96–106 MPa, 9–13% and 1.1–1.7 GPa, respectively. The T₁₀ values of the polyimides are in the range 540–598 °C in nitrogen and 545–586 °C in air, with more than 50–60% char yield. They have T_g values between 244 and 285 °C. The prepared polyimides show cut‐off wavelengths in the range 365–412 nm and transmittance at 450 nm in the range 80.9–94.2%. The dielectric constants of the polyimide films are in the range 3.10–3.77 at 1 kHz and 3.04–3.66 at 10 kHz, with moisture absorption of 0.14–0.40%. Copyright © 2006 Society of Chemical Industry     

High‐performance copoly(benzimidazole‐benzoxazole‐imide) fibers: Fabrication,structure, and properties

Novel high‐performance copolyimide (co‐PI) fibers containing benzimidazole and benzoxazole ring in the main chain were prepared by a two‐step spinning via the poly(amic acid)s. Effects of the incorporated benzimidazole and benzoxazole units on the micro‐structure and properties of co‐PI fibers were investigated. Fourier transform infrared (FTIR) results indicated that hydrogen bonding is formed in the co‐PI fibers. The co‐PI fibers exhibited discernible crystallization peaks at 14°～15° and 23°～26° (2θ), showing crystalline‐like structure. Moreover, the packing type of benzimidazole‐imide units determined the macromolecules packing of co‐PIs. It was amazedly found that the co‐PI fibers exhibited higher tensile strength and initial modulus than those of corresponding homo‐PI fibers, reaching tensile strength of 2.2–2.6 GPa, initial modulus of 99.1–113.2 GPa. The results of dynamic mechanical analysis (DMA) indicated co‐PI2 fiber had a positive T_g deviation due to the presence of strong intermolecular hydrogen bonding between benzimidazole‐imide and benzoxazole‐imide units, which maybe lead to the effective stress transfer between benzimidazole‐imide units and benzoxazole‐imide units. In addition, the obtained PI fibers exhibited excellent thermal properties with the 10% weight loss temperatures under N₂ in the range of 574–585°C. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42001.     

Vinyl‐type homo‐ and copolymerization of norbornene catalyzed by bis(phenoxyimine) titanium complex

A ternary catalytic system consisting of a bis(phenoxyimine) titanium complex, triisobutylaluminium and an organoboron compound exhibited high activity in the vinyl‐type homopolymerization of norbornene. The obtained polynorbornene showed a modest molecular weight (M _n ≈ 5 × 10⁴ g mol^?1) and broad molecular weight distribution (polydispersity index ≈ 3.5). A copolymer of norbornene with 1,3‐butadiene was prepared using a binary catalytic system consisting of bis(phenoxyimine) titanium complex and triisobutylaluminium. The norbornene units in the copolymer adopted a vinyl‐type addition structure confirmed using distortionless enhancement by polarization transfer 135 ¹³C NMR microstructure analyses. Polymerization kinetics studies showed that neither monomer feed ratio nor conversion had an effect on the composition of the copolymer backbone which was composed of 55% norbornene units and 45% 1,3‐butadiene units. The essentially constant polymer composition implied an alternating nature of chain propagation. The copolymer exhibited good thermal stability and moderate glass transition temperature (50.9–68.2 °C) with a relatively high molecular weight (M _w = 0.18 × 10–1.31 × 10⁵ g mol^?1), and excellent transparency (maximal transmittance >80%). © 2017 Society of Chemical Industry     

Solution processed low‐k dielectric core‐shell nanoparticles for additive manufacturing of microwave devices

This study introduces a new core‐shell structured polytetrafluoroethylene (PTFE)/polyimide (PI) nanoparticle for additive manufacturing of microwave substrates. Materials were synthesized using a solution processed method through the electrostatic interaction between PTFE with negative potential and poly(amic acid) salt (PAAS, a PI precursor) with positive potential followed by the thermal imidization of PAAS. Microscopic studies by transmission electron microscopy, scanning electron microscopy, and atomic force microscopy confirmed the formation of core‐shell nanoparticles, a porous material network, and a reduction of surface roughness upon imidization. In addition to excellent high temperature stability (<0.4% weight loss at 500 °C), the synthesized materials showed improved particle‐to‐particle adhesion and particle‐to‐substrate adhesion compared to PTFE alone, and good dielectric properties measured at 7.2 GHz utilizing a cavity perturbation technique. The materials consisting of 5% to 35% of PI exhibited low relative permittivity (?′) of 2.14 to 2.38 and loss tangent (tan δ) of 0.001 to 0.0018, which make them well suited for use in additive manufacturing. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45335.     

Fabrication and characterization of soluble,high thermal,and hydrophobic polyimides based on 4‐(3,5‐dimethoxyphenyl)‐2,6‐bis(4‐aminophenyl)pyridine

A novel aromatic diamine monomer, 4‐(3,5‐dimethoxyphenyl)‐2,6‐bis(4‐aminophenyl)pyridine (DPAP) was successfully synthesized by 4′‐nitroacetophenone and 3,5‐dimethoxybenzaldehyde as raw material. The structure of DPAP was confirmed by Fourier transform infrared, nuclear magnetic resonance, and mass analysis. A series of polyimides (PIs) were obtained by polycondensation with various dianhydrides via the conventional two‐step method. These PIs showed good solubility in organic solvents. They also presented high thermal stability, the glass transition temperatures (T_g) of polymers were in the range of 325–388 °C, and the temperature at 10% weight loss was in the range of 531–572 °C. Furthermore, these polymers also exhibited outstanding hydrophobicity with the contact angles in the range of 89.1°–93.5°. Moreover, the results of wide‐angle X‐ray diffraction (WAXD) confirmed these polymers showed amorphous structure. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45827.     

Structure and properties of aromatic poly(benzimidazole‐imide) copolymer fibers

A series of co‐polyimide fibers were prepared by thermal imidization of copolyamic acids derived from 3,3′,4,4′‐biphenyltertracarboxylic dianhydride (BPDA) and pyromellitic dianhydride (PMDA) in various molar ratios with 2‐(4‐aminophenyl)?5‐aminobenzimidazole (BIA). The dynamic mechanical behaviors of these polyimide (PI) fibers revealed that the glass transition temperature (T_g) was significantly improved upon increasing PMDA content. Heat‐drawing process led to dramatic change on the glass transition behavior of BPDA/BIA system, but had a small impact on BPDA/PMDA/BIA co‐polyimide fibers. This difference for PI fibers is attributed to the different degree of ordered structure of the fibers affected by heat‐drawing. The incorporation of PMDA obviously improved the dimensional stability against high temperature, due to the restricted movement of polymer chains. In addition, the obtained fibers show excellent mechanical and thermal properties because of the strong hydrogen bonding due to the incorporation of benzimidazole moieties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41474.     

Effect of side‐chain functionality on the organic field‐effect transistor performance of oligo(p‐phenylenevinylene) derivatives

In order to observe the effects of the substitution of electronegative flourine with aromatic groups in oligo(p ‐phenylenevinylene) compounds on their packing, morphology, and charge carrier mobility, we have synthesized napthol‐substituted oligo(p ‐phenylenevinylene) compounds and examined their solubility, redox properties, thin film morphologies, and charge carrier properties. To date, very few examples of conjugated oligomers bearing napthol side groups have been reported in the literature. After annealing at 150 °C, the mobility of S1, S2, and S3 was 4.0 × 10^?2 cm² V^?1 s^?1, 1.2 × 10^?2 cm² V^?1 s^?1, and 2.6 × 10^?3 cm² V^?1 s^?1, respectively. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44825.