共查询到20条相似文献,搜索用时 109 毫秒
1.
将无线传感网络(WSN)与TCP/IP(传输控制协议/互联网协议)网络融合是目前非常热门的研究课题。文章分析和比较一些现有无线传感网络与TCP/IP网络的互联技术,得出无线传感网络与TCP/IP网络互联的基本设计原则和思想。在充分分析和比较近期国内外的一些相关研究后,提出基于虚拟IP网关设计方案,该方案集中了大部分相关研究方案的优点。 相似文献
2.
3.
4.
5.
《现代电子技术》2017,(2)
无线传感网络中通用信号的庞大数量对无线传感网络中通用信号采集系统的信号失效率提出较高的要求。为此,设计信号失效率小的无线传感网络中通用信号采集系统,该系统的核心元件为CC2430,MEMS加速度传感器和网络协调器。信号识别模块中的CC2430将无线传感网络中的初始通用信号识别出来后,对其进行信号放大等操作,并传输给信号加速模块中的MEMS加速度传感器进行加速处理。经加速处理后的初始通用信号会被传输到组网传输模块,该模块中的网络协调器通过组网的方式,为通用信号提供高速传输通道。软件部分设计了网络协调器组网流程图,以及USB串行外设接口进行读/写的代码。实验结果表明,所构建的系统能够快速识别、快速传输无线传感网络中的通用信号,系统信号失效率较低。 相似文献
6.
侯远韶 《信息技术与信息化》2022,(2):129-132
随着现代信息技术、嵌入式系统以及植入式电子设备的发展,小型化、低功耗的无线传感网络已融入人们的日常生活影响着方方面面。传统的能量供电方式,生命周期有限更换需要耗费大量的人力财力,维护成本高。针对这一情况,设计了一款基于射频供能的无线传感网络数据传输系统。通过构建相应的天线模块、整流模块以及能量管理模块对环境中的射频电磁波进行采集,进而转换为负载可以直接使用的稳定直流电。同时由于射频电磁波能量密度低,导致输出的直流电功率较低,需要对能量分配方案和数据可靠性进行优化选择,并通过建模求解建立信道选择方案,最终提高网络的吞吐效率,继而保障网络节点获得稳定的能量。通过对射频能量传输系统进行仿真和实验测试,验证了设计的有效性和实用性。 相似文献
7.
提高无线传感网络的传输效率、节约整个网络的能量消耗是我们研究无线传感网络的重要内容。通常都是通过改变网络的拓扑结构来实现效率的提高,本文给出了一种新的思路去节约能耗。本文讨论了权重与与无线传感网传输效率的关系,将有权的无线传感网络链路上的权值进行随机的分配,我们发现将权重随机分配后网络的传输效率得到了提高并且随着权重分布概率的增大网络的传输效率不断增大。这为我们研究权重对无线传感网络的影响提供了基础。 相似文献
8.
《现代电子技术》2016,(14)
将无线传感网络技术与Zig Bee技术进行融合,使用Zig Bee技术搭建无线传感网络,并建立基于Zig Bee无线传感器网络的远程数据监测系统。以楼宇供暖远程监测系统为例,对基于Zig Bee无线传感网络的远程数据监测系统设计进行说明。对Zig Bee节点的核心组件PIC18LF4620处理器和CC2420无线射频模块引脚连接电路进行设计;对Zig Bee无线传感网络中处理器和模块的软件程序以及上位机组态监测软件进行设计。通过在目标楼宇内成功安装调试该文研究的楼宇供暖远程数据监测系统,使得全天候各个供暖时段的室温均在要求的18℃以上,基本能够达到室温均衡,节约了供暖公司的成本和资源。 相似文献
9.
为进一步提高无线射频识别系统单个读写器识别电子标签的速率,设计了一种将码分与统计时分技术相结合的新型无线射频识别系统的空中接口协议,并分析了系统的抗噪声性能、识别速率等主要性能指标。仿真结果表明,新型无线射频识别系统在抗噪声性能和识别速率等方面均优于基于现有国际标准ISO/IEC 18000-6C的无线射频识别系统。 相似文献
10.
基于MC13193的ZigBee无线传感网络设计 总被引:1,自引:0,他引:1
集成了传感技术、计算机技术、通信技术的无线传感网络成为无线通信领域研究的热点,低速率、低功耗的Zig-Bee技术的出现为其发展提供了契机。介绍了ZigBee网络的结构,分析了2.4 GHz的射频收发芯片MC13193的特点和性能,并应用MC13193及相关微控制器、传感器件设计了ZigBee无线传感网络。 相似文献
11.
《中国电子商情-RFID技术与应用》编辑 《中国电子商情》2007,(3)
RFID技术存在着通信距离短等缺点,借助WSN无线传感网络除了可以弥补RFID技术的这些缺点之外,还可以准确地为WSN的节点赋以ID编号。本文介绍了WSN技术及其用途、通行协议ZigBee,RFID与WSN结合的契机、RFID协同WSN、RTLS驱动数字化供应链,分析了RFID与WSN相互融合的状况和发展趋势。 相似文献
12.
Radio frequency identification and wireless sensor networks are two important wireless technologies that have a wide variety of applications in current and future systems. RFID facilitates detection and identification of objects that are not easily detectable or distinguishable by using conventional sensor technologies. However, it does not provide information about the condition of the objects it detects. WSN, on the other hand, not only provides information about the condition of the objects and environment but also enables multihop wireless communications. Hence, the integration of these technologies expands their overall functionality and capacity. This article investigates recent research work and applications that integrate RFID with sensor networks. Four classes of integration are discussed: integrating tags with sensors, integrating tags with WSN nodes and wireless devices, integrating readers with WSN nodes and wireless devices, and a mix of RFID and WSNs. Finally, a discussion of new challenges and future work is presented. 相似文献
13.
14.
15.
16.
17.
本文阐述了RFID技术发展的历史和工作特点。另外叙述了短距离无线设备管理的有关问题,并对网路化的RFID和无线传感网WSN各做了相关叙述,以及两者结合所产生的优势。最后阐释了无线电频谱资源的重要性,特性以及多频段的命名,并提出了频谱资源管理的措施。 相似文献
18.
本文阐述了RFID技术发展的历史和工作特点。另外叙述了短距离无线设备管理的有关问题,并对网路化的RFID和无线传感网WSN各做了相关叙述,以及两者结合所产生的优势。最后阐释了无线电频谱资源的重要性,特性以及多频段的命名,并提出了频谱资源管理的措施。 相似文献
19.
This paper focuses on the analysis of tags collection time of 2.4 GHz embedded active Radio Frequency Identification (RFID) system for indoor and outdoor real-time tracking and monitoring applications based on IEEE 802.15.4 standard. The main novelty of the system is the implementation of the communication method in order to provide Machine to Machine (M2M) communication and automated switching mechanism between indoor and outdoor location by utilizing active RFID, Wireless Sensor Network (WSN), Global Positioning System (GPS) and mobile communication on a single platform. In this work, GPS receiver covers outdoor location tracking, while active RFID provides identification and Receive Signal Strength Indicator (RSSI) reading for each tag holder to cover indoor location tracking especially near or inside building where location information is not detected by GPS. Several experiments were conducted on three different RFID tags which were active RFID tag embedded with GPS and GSM (ERFIDG2), active RFID tag embedded with GPS (ERFIDG) and standalone RFID tag communicating with the same active RFID reader. The experiment was done to evaluate the communication performance of the active RFID in terms of tags collection time using Transparent (AT) and Application Programming Interface (API) mode. The experiment was extended to measure tags collection time in single hop and multi hops communication for Tag Talk First (TTF) and Reader Talk First (RTF) protocols. The results show that the proposed active RFID system (ERFIDG2) is better than the standalone and ERFIDG systems. The in-depth research done in this work is to study the experience and identify the challenges that will be faced in the development and implementation of a wireless RFID-based system for tracking and monitoring applications. 相似文献
20.
物联网中无线传感器节点和RFID数据融合的方法 总被引:1,自引:0,他引:1
针对当前物联网感知层在感知多源信息时,尚没有一种很好的融合方法的问题,根据无线传感器网络(WSN)和射频识别(RFID)网络自身的特点,通过引入数据融合器,提出了一种将电子产品编码(EPC)和环境参数建立映射关系的方法.将该方法应用于超市仓储管理系统,对其编码并且构建原型系统,该方法能够明显提高数据传输的有效率,试验结... 相似文献