Ultrathin Porous NiFeV Ternary Layer Hydroxide Nanosheets as a Highly Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Herein, the hydrothermal synthesis of porous ultrathin ternary NiFeV layer double hydroxides (LDHs) nanosheets grown on Nickel foam (NF) substrate as a highly efficient electrode toward overall water splitting in alkaline media is reported. The lateral size of the nanosheets is about a few hundreds of nanometers with the thickness of ≈10 nm. Among all molar ratios investigated, the Ni_0.75Fe_0.125V_0.125‐LDHs/NF electrode depicts the optimized performance. It displays an excellent catalytic activity with a modest overpotential of 231 mV for the oxygen evolution reaction (OER) and 125 mV for the hydrogen evolution reaction (HER) in 1.0 m KOH electrolyte. Its exceptional activity is further shown in its small Tafel slope of 39.4 and 62.0 mV dec^?1 for OER and HER, respectively. More importantly, remarkable durability and stability are also observed. When used for overall water splitting, the Ni_0.75Fe_0.125V_0.125‐LDHs/NF electrodes require a voltage of only 1.591 V to reach 10 mA cm^?2 in alkaline solution. These outstanding performances are mainly attributed to the synergistic effect of the ternary metal system that boosts the intrinsic catalytic activity and active surface area. This work explores a promising way to achieve the optimal inexpensive Ni‐based hydroxide electrocatalyst for overall water splitting.     

Ce Site in Amorphous Iron Oxyhydroxide Nanosheet toward Enhanced Electrochemical Water Oxidation

Iron oxyhydroxide has been considered an auspicious electrocatalyst for the oxygen evolution reaction (OER) in alkaline water electrolysis due to its suitable electronic structure and abundant reserves. However, Fe-based materials seriously suffer from the tradeoff between activity and stability at a high current density above 100 mA cm⁻². In this work, the Ce atom is introduced into the amorphous iron oxyhydroxide (i.e., CeFeO_xH_y) nanosheet to simultaneously improve the intrinsic electrocatalytic activity and stability for OER through regulating the redox property of iron oxyhydroxide. In particular, the Ce substitution leads to the distorted octahedral crystal structure of CeFeO_xH_y, along with a regulated coordination site. The CeFeO_xH_y electrode exhibits a low overpotential of 250 mV at 100 mA cm⁻² with a small Tafel slope of 35.1 mVdec⁻¹. Moreover, the CeFeO_xH_y electrode can continuously work for 300 h at 100 mA cm⁻². When applying the CeFeO_xH_y nanosheet electrode as the anode and coupling it with the platinum mesh cathode, the cell voltage for overall water splitting can be lowered to 1.47 V at 10 mA cm⁻². This work offers a design strategy for highly active, low-cost, and durable material through interfacing high valent metals with earth-abundant oxides/hydroxides.     

Active Sites Intercalated Ultrathin Carbon Sheath on Nanowire Arrays as Integrated Core–Shell Architecture: Highly Efficient and Durable Electrocatalysts for Overall Water Splitting

The development of active bifunctional electrocatalysts with low cost and earth‐abundance toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) remains a great challenge for overall water splitting. Herein, metallic Ni₄Mo nanoalloys are firstly implanted on the surface of NiMoO_x nanowires array (NiMo/NiMoO_x ) as metal/metal oxides hybrid. Inspired by the superiority of carbon conductivity, an ultrathin nitrogen‐doped carbon sheath intercalated NiMo/NiMoO_x (NC/NiMo/NiMoO_x ) nanowires as integrated core–shell architecture are constructed. The integrated NC/NiMo/NiMoO_x array exhibits an overpotential of 29 mV at 10 mA cm^?2 and a low Tafel slope of 46 mV dec^?1 for HER due to the abundant active sites, fast electron transport, low charge‐transfer resistance, unique architectural structure and synergistic effect of carbon sheath, nanoalloys, and oxides. Moreover, as OER catalysts, the NC/NiMo/NiMoO_x hybrids require an overpotential of 284 mV at 10 mA cm^?2. More importantly, the NC/NiMo/NiMoO_x array as a highly active and stable electrocatalyst approaches ≈10 mA cm^?2 at a voltage of 1.57 V, opening an avenue to the rational design and fabrication of the promising electrode materials with architecture structures toward the electrochemical energy storage and conversion.     

High-Performance Bifunctional Porous Iron-Rich Phosphide/Nickel Nitride Heterostructures for Alkaline Seawater Splitting

Seawater is the most abundant natural water resource in the world, which is an inexhaustible and low-cost feedstock for hydrogen production by alkaline water electrolysis. It is appearling to develop robust and stable electrocatalysts for alkaline seawater electrolysis. However, the development of seawater electrolysis is seriously impeded by anodic chloride corrosion and chlorine evolution reaction, and few non-noble electrocatalysts show prominent catalytic performance and excellent durability. Here, a heterogeneous electrocatalyst constructed by in situ growing highly dispersed iron-rich bimetallic phosphide nanoparticles on metallic Ni₃N (Fe_2−2xCo_2xP/Ni₃N), which exhibits outstanding bifunctional catalytic activities for alkaline seawater splitting, is reported. The optimal (Fe_0.74Co_0.26)₂P/Ni₃N and Fe₂P/Ni₃N electrocatalysts demand only 113 and 212 mV to afford 100 mA cm⁻² for hydrogen and oxygen evolution reactions (HER and OER) in 1 m KOH, respectively, thus substantially expediting overall water/seawater electrolysis at 100 mA cm⁻² with 1.592/1.645 V. Particularly, Fe₂P/Ni₃N displays an unprecedented overpotential of 302 mV at 500 mA cm⁻², which represents the best alkaline seawater oxygen evolution activity among the ever-reported non-noble electrocatalysts; and thus substantially expedites overall water/seawater splitting at 500 mA cm⁻² with 1.701/1.768 V, surpassing most of the reported non-noble lectrocatalysts. This work provides a new approach for developing high-performance electrocatalysts for seawater splitting.     

Interfacial Engineering of W2N/WC Heterostructures Derived from Solid-State Synthesis: A Highly Efficient Trifunctional Electrocatalyst for ORR,OER, and HER

To meet the practical demand of overall water splitting and regenerative metal–air batteries, highly efficient, low-cost, and durable electrocatalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are required to displace noble metal catalysts. In this work, a facile solid-state synthesis strategy is developed to construct the interfacial engineering of W₂N/WC heterostructures, in which abundant interfaces are formed. Under high temperature (800 °C), volatile CN_x species from dicyanodiamide are trapped by WO₃ nanorods, followed by simultaneous nitridation and carbonization, to form W₂N/WC heterostructure catalysts. The resultant W₂N/WC heterostructure catalysts exhibit an efficient and stable electrocatalytic performance toward the ORR, OER, and HER, including a half-wave potential of 0.81 V (ORR) and a low overpotential at 10 mA cm⁻² for the OER (320 mV) and HER (148.5 mV). Furthermore, a W₂N/WC-based Zn–air battery shows outstanding high power density (172 mW cm⁻²). Density functional theory and X-ray absorption fine structure analysis computations reveal that W₂N/WC interfaces synergistically facilitate transport and separation of charge, thus accelerating the electrochemical ORR, OER, and HER. This work paves a novel avenue for constructing efficient and low-cost electrocatalysts for electrochemical energy devices.     

Constructing Pure Phase Tungsten‐Based Bimetallic Carbide Nanosheet as an Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Carbides are commonly regarded as efficient hydrogen evolution reaction (HER) catalysts, but their poor oxygen evolution reaction (OER) catalytic activities seriously limit their practical application in overall water splitting. Here, vertically aligned porous cobalt tungsten carbide nanosheet embedded in N‐doped carbon matrix (Co₆W₆C@NC) is successfully constructed on flexible carbon cloth (CC) as an efficient bifunctional electrocatalyst for overall water splitting via a facile metal–organic framework (MOF) derived method. The synergistic effect of Co and W atoms effectively tailors the electron state of carbide, optimizing the hydrogen‐binding energy. Thus Co₆W₆C@NC shows an enhanced HER performance with an overpotential of 59 mV at a current density of ?10 mA cm^?2. Besides, Co₆W₆C@NC easily in situ transforms into tungsten actived cobalt oxide/hydroxide during the OER process, serving as OER active species, which provides an excellent OER activity with an overpotential of 286 mV at a current density of ?10 mA cm^?2. The water splitting device, by applying Co₆W₆C@NC as both the cathode and anode, requires a low cell voltage of 1.585 V at 10 mA cm^?2 with the great stability in alkaline solution. This work provides a feasible strategy to fabricate bimetallic carbides and explores their possibility as bifunctional catalysts toward overall water splitting.     

IrPd Nanoalloy-Structured Bifunctional Electrocatalyst for Efficient and pH-Universal Water Splitting

The lack of high efficiency and pH-universal bifunctional electrocatalysts for water splitting to hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hinders the large-scale production of green hydrogen. Here, an IrPd electrocatalyst supported on ketjenblack that exhibits outstanding bifunctional performance for both HER and OER at wide pH conditions is presented. The optimized IrPd catalyst exhibits a specific activity of 4.46 and 3.98 A mg_Ir⁻¹ in the overpotential of 100 and 370 mV for HER and OER, respectively, in alkaline conditions. When applied to the anion exchange membrane electrolyzer, the Ir₄₄Pd₅₆/KB catalyst shows a stability of >20 h at a current of 250 mA cm⁻² for water decomposition, indicating promising prospects for practical applications. Beyond offering an advanced electrocatalyst, this work also guides the rational design of desirable bifunctional electrocatalysts for HER and OER by regulating the microenvironments and electronic structures of metal catalytic sites for diverse catalysis.     

Cation‐Modulated HER and OER Activities of Hierarchical VOOH Hollow Architectures for High‐Efficiency and Stable Overall Water Splitting

Atom‐scale modulation of electronic regulation in nonprecious‐based electrocatalysts is promising for efficient catalytic activities. Here, hierarchically hollow VOOH nanostructures are rationally constructed by partial iron substitution and systematically investigated for electrocatalytic water splitting. Benefiting from the hierarchically stable scaffold configuration, highly electrochemically active surface area, the synergistic effect of the active metal atoms, and optimal adsorption energies, the 3% Fe (mole ratio) substituted electrocatalyst (VOOH‐3Fe) exhibits a low overpotential of 90 and 195 mV at 10 mA cm^?2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline media, respectively, superior than the other samples with a different substituted ratio. To the best of current knowledge, 195 mV overpotential at 10 mA cm^?2 is the best value reported for V or Fe (oxy)hydroxide‐based OER catalysts. Moreover, the electrolytic cell employing the VOOH‐3Fe electrode as both the cathode and anode exhibits a cell voltage of 0.30 V at 10 mA cm^?2 with a remarkable stability over 60 h. This work heralds a new pathway to design efficient bifunctional catalysts toward overall water splitting.     

Exceptional Performance of Hierarchical Ni–Fe (hydr)oxide@NiCu Electrocatalysts for Water Splitting

Developing low‐cost bifunctional electrocatalysts with superior activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of great importance for the widespread application of the water splitting technique. In this work, using earth‐abundant transition metals (i.e., nickel, iron, and copper), 3D hierarchical nanoarchitectures, consisting of ultrathin Ni–Fe layered‐double‐hydroxide (Ni–Fe LDH) nanosheets or porous Ni–Fe oxides (NiFeO_x) assembled to a metallic NiCu alloy, are delicately constructed. In alkaline solution, the as‐prepared Ni–Fe LDH@NiCu possesses outstanding OER activity, achieving a current density of 10 mA cm^?2 at an overpotential of 218 mV, which is smaller than that of RuO₂ catalyst (249 mV). In contrast, the resulting NiFeO_x@NiCu exhibits better HER activity, yielding a current density of 10 mA cm^?2 at an overpotential of 66 mV, which is slightly higher than that of Pt catalyst (53 mV) but superior to all other transition metal (hydr)oxide‐based electrocatalysts. The remarkable activity of the Ni–Fe LDH@NiCu and NiFeO_x@NiCu is further demonstrated by a 1.5 V solar‐panel‐powered electrolyzer, resulting in current densities of 10 and 50 mA cm^?2 at overpotentials of 293 and 506 mV, respectively. Such performance renders the as‐prepared materials as the best bifunctional electrocatalysts so far.     

Synergistic Modulation of Electronic Interaction to Enhance Intrinsic Activity and Conductivity of Fe–Co–Ni Hydroxide Nanotube for Highly Efficient Oxygen Evolution Electrocatalyst

The large-scale hydrogen production and application through electrocatalytic water splitting depends crucially on the development of highly efficient, cost-effective electrocatalysts for oxygen evolution reaction (OER), which, however, remains challenging. Here, a new electrocatalyst of trimetallic Fe–Co–Ni hydroxide (denoted as FeCoNiO_xH_y) with a nanotubular structure is developed through an enhanced Kirkendall process under applied potential. The FeCoNiO_xH_y features synergistic electronic interaction between Fe, Co, and Ni, which not only notably increases the intrinsic OER activity of FeCoNiO_xH_y by facilitating the formation of *OOH intermediate, but also substantially improves the intrinsic conductivity of FeCoNiO_xH_y to facilitate charge transfer and activate catalytic sites through electrocatalyst by promoting the formation of abundant Co³⁺. Therefore, FeCoNiO_xH_y delivers remarkably accelerated OER kinetics and superior apparent activity, indicated by an ultra-low overpotential potential of 257 mV at a high current density of 200 mA cm⁻². This work is of fundamental and practical significance for synergistic catalysis related to advanced energy conversion materials and technologies.     

Interfacial Engineering of Copper–Nickel Selenide Nanodendrites for Enhanced Overall Water Splitting in Alkali Condition (Small 33/2023)

Fabricating heterogeneous interfaces is an effective approach to improve the intrinsic activity of noble-metal-free catalysts for water splitting. Herein, 3D copper–nickel selenide (CuNi@NiSe) nanodendrites with abundant heterointerfaces are constructed by a precise multi-step wet chemistry method. Notably, CuNi@NiSe only needs 293 and 41 mV at 10 mA cm⁻² for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively. Moreover, the assembled CuNi@NiSe system just requires 2.2 V at 1000 mA cm⁻² in anion exchange membrane (AEM) electrolyzer, which is 2.0 times better than Pt/C//IrO₂. Mechanism studies reveal Cu defects on the Cu_2−xSe surface boost the electron transfer between Cu atoms and Se atoms of Ni₃Se₄ via Cu_2−xSe/Ni₃Se₄ interface, largely lowering the reaction barrier of rate-determining step for HER. Besides, the intrinsic activity of Ni atoms for in situ generated NiOOH is largely enhanced during OER because of the electron-modulating effect of Se atoms at Ni₃Se₄/NiOOH interface. The unique 3D structure also promotes the mass transfer during catalysis process. This work emphasizes the essential role of interfacial engineering for practical water splitting.     

Metallic Metastable Hybrid 1T′/1T Phase Triggered Co,P?SnS2 Nanosheets for High Efficiency Trifunctional Electrocatalyst

The development of trifunctional electrocatalyst for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) with deeply understanding the mechanism to enhance the electrochemical performance is still a challenging task. In this work, the distorted metastable hybrid-phase induced 1T′/1T Co,P SnS₂ nanosheets on carbon cloth (1T′/1T Co,P SnS₂@CC) is prepared and examined. The density functional theoretical (DFT) calculation suggests that the distorted 1T′/1T Co,P SnS₂ can provide excellent conductivity and strong hydrogen adsorption ability. The electronic structure tuning and enhancement mechanism of electrochemical performance are investigated and discussed. The optimal 1T′/1T Co,P SnS₂@CC catalyst exhibits low overpotential of ≈94 and 219.7 mV at 10 mA cm⁻² for HER and OER, respectively. Remarkably, the catalyst exhibits exceptional ORR activity with small onset potential value (≈0.94 V) and half-wave potential (≈0.87 V). Most significantly, the 1T′/1T Co,P SnS₂||Co,P SnS₂ electrolyzer required small cell voltages of ≈1.53, 1.70, and 1.82 V at 10, 100, and 400 mA cm⁻², respectively, which are better than those of state-of-the-art Pt-C||RuO₂ (≈1.56 and 1.84 V at 10 and 100 mA cm⁻²). The present study suggests a new approach for the preparation of large-scalable, high performance hierarchical 3D next-generation trifunctional electrocatalysts.     

3D Nitrogen‐Anion‐Decorated Nickel Sulfides for Highly Efficient Overall Water Splitting

Developing non‐noble‐metal electrocatalysts with high activity and low cost for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is of paramount importance for improving the generation of H₂ fuel by electrocatalytic water‐splitting. This study puts forward a new N‐anion‐decorated Ni₃S₂ material synthesized by a simple one‐step calcination route, acting as a superior bifunctional electrocatalyst for the OER/HER for the first time. The introduction of N anions significantly modifies the morphology and electronic structure of Ni₃S₂, bringing high surface active sites exposure, enhanced electrical conductivity, optimal HER Gibbs free‐energy (ΔG_H*), and water adsorption energy change (ΔG_H2O*). Remarkably, the obtained N‐Ni₃S₂/NF 3D electrode exhibits extremely low overpotentials of 330 and 110 mV to reach a current density of 100 and 10 mA cm^?2 for the OER and HER in 1.0 m KOH, respectively. Moreover, an overall water‐splitting device comprising this electrode delivers a current density of 10 mA cm^?2 at a very low cell voltage of 1.48 V. Our finding introduces a new way to design advanced bifunctional catalysts for water splitting.     

Cobalt Covalent Doping in MoS2 to Induce Bifunctionality of Overall Water Splitting

The layer‐structured MoS₂ is a typical hydrogen evolution reaction (HER) electrocatalyst but it possesses poor activity for the oxygen evolution reaction (OER). In this work, a cobalt covalent doping approach capable of inducing HER and OER bifunctionality into MoS₂ for efficient overall water splitting is reported. The results demonstrate that covalently doping cobalt into MoS₂ can lead to dramatically enhanced HER activity while simultaneously inducing remarkable OER activity. The catalyst with optimal cobalt doping density can readily achieve HER and OER onset potentials of ?0.02 and 1.45 V (vs reversible hydrogen electrode (RHE)) in 1.0 m KOH. Importantly, it can deliver high current densities of 10, 100, and 200 mA cm^?2 at low HER and OER overpotentials of 48, 132, 165 mV and 260, 350, 390 mV, respectively. The reported catalyst activation approach can be adapted for bifunctionalization of other transition metal dichalcogenides.     

Nickel Diselenide Ultrathin Nanowires Decorated with Amorphous Nickel Oxide Nanoparticles for Enhanced Water Splitting Electrocatalysis

Well‐designed hybrid materials based on noble metal‐free elements have great potential to generate hydrogen (H₂) and oxygen (O₂) sustainably via overall water splitting for developing practical energy‐related technologies. Herein, an accessible method is presented to synthesize nickel diselenide (NiSe₂) ultrathin nanowires decorated with amorphous nickel oxide nanoparticles (NiO_x NPs) as multifunctional electrocatalysts (NSWANs) for hydrogen and oxygen evolution reaction (HER and OER). The NSWANs exhibit quite low HER and OER overpotentials of 174 and 295 mV, respectively, holding the current density of 20 mA cm^?2 for 24 h continuous operations in alkaline media. Meanwhile, a cell voltage of 1.547 V at the current density of 10 mA cm^?2 for overall water splitting has been achieved by the NSWANs for the practical application, which could maintain fascinating activity of 20 mA cm^?2 for 72 h without degradation. The decorated NiO_x NPs not only prevent the NiSe₂ from further oxidation but also expose requisite active sites for electrocatalytic process. It is believed that this study may provide a valuable strategy to design high‐efficiency electrocatalysts and expand the applications of selenide‐based materials.     

Dynamically Stabilized Electronic Regulation and Electrochemical Reconstruction in Co and S Atomic Pair Doped Fe3O4 for Water Oxidation

The electronic regulation and surface reconstruction of earth-abundant electrocatalysts are essential to efficient oxygen evolution reaction (OER). Here, an inverse-spinel Co,S atomic pair codoped Fe₃O₄ grown on iron foam (Co,S-Fe₃O₄/IF) is fabricated as a cost-effective electrocatalyst for OER. This strategy of Co and S atomic pair directional codoping features accelerates surface reconstruction and dynamically stabilizes electronic regulation. Co S atomic pairs doped in the Fe₃O₄ crystal favor controllable surface reconstruction via sulfur leaching, forming oxygen vacancies and Co doping on the surface of reconstructed FeOOH (Co-FeOOH-O_v/IF). Before and after surface reconstruction via in situ electrochemical process, the Fe sites with octahedral field dynamically maintains an appropriate electronic structure for OER intermediates, thus exhibiting consistently excellent OER performance. The electrochemically tuned Fe-based electrodes exhibit a low overpotential of 349 mV at a current density of 1000 mA cm⁻², a slight Tafel slope of 43.3 mV dec⁻¹, and exceptional long-term electrolysis stability of 200 h in an alkaline medium. Density functional theory calculations illustrate the electronic regulation of Fe sites, changes in Gibbs free energies, and the breaking of the restrictive scaling relation between OER intermediates. This work provides a promising directional codoping strategy for developing precatalysts for large-scale water-splitting systems.     

Trifunctional Single‐Atomic Ru Sites Enable Efficient Overall Water Splitting and Oxygen Reduction in Acidic Media

Development of cost‐effective, active trifunctional catalysts for acidic oxygen reduction (ORR) as well as hydrogen and oxygen evolution reactions (HER and OER, respectively) is highly desirable, albeit challenging. Herein, single‐atomic Ru sites anchored onto Ti₃C₂T_x MXene nanosheets are first reported to serve as trifunctional electrocatalysts for simultaneously catalyzing acidic HER, OER, and ORR. A half‐wave potential of 0.80 V for ORR and small overpotentials of 290 and 70 mV for OER and HER, respectively, at 10 mA cm^?2 are achieved. Hence, a low cell voltage of 1.56 V is required for the acidic overall water splitting. The maximum power density of an H₂–O₂ fuel cell using the as‐prepared catalyst can reach as high as 941 mW cm^?2. Theoretical calculations reveal that isolated Ru–O₂ sites can effectively optimize the adsorption of reactants/intermediates and lower the energy barriers for the potential‐determining steps, thereby accelerating the HER, ORR, and OER kinetics.     

ZIF‐8/ZIF‐67‐Derived Co‐Nx‐Embedded 1D Porous Carbon Nanofibers with Graphitic Carbon‐Encased Co Nanoparticles as an Efficient Bifunctional Electrocatalyst

Herein, an approach is reported for fabrication of Co‐N_x‐embedded 1D porous carbon nanofibers (CNFs) with graphitic carbon‐encased Co nanoparticles originated from metal–organic frameworks (MOFs), which is further explored as a bifunctional electrocatalyst for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Electrochemical results reveal that the electrocatalyst prepared by pyrolysis at 1000 °C (CoNC‐CNF‐1000) exhibits excellent catalytic activity toward ORR that favors the four‐electron ORR process and outstanding long‐term stability with 86% current retention after 40 000 s. Meanwhile, it also shows superior electrocatalytic activity toward OER, reaching a lower potential of 1.68 V at 10 mA cm^?2 and a potential gap of 0.88 V between the OER potential (at 10 mA cm^?2) and the ORR half‐wave potential. The ORR and OER performance of CoNC‐CNF‐1000 have outperformed commercial Pt/C and most nonprecious‐metal catalysts reported to date. The remarkable ORR and OER catalytic performance can be mainly attributable to the unique 1D structure, such as higher graphitization degree beneficial for electronic mobility, hierarchical porosity facilitating the mass transport, and highly dispersed CoN_xC active sites functionalized carbon framework. This strategy will shed light on the development of other MOF‐based carbon nanofibers for energy storage and electrochemical devices.     

Lattice-Strain Engineering of Homogeneous NiS0.5Se0.5 Core–Shell Nanostructure as a Highly Efficient and Robust Electrocatalyst for Overall Water Splitting

Developing highly-efficient non-noble-metal electrocatalysts for water splitting is crucial for the development of clean and reversible hydrogen energy. Introducing lattice strain is an effective strategy to develop efficient electrocatalysts. However, lattice strain is typically co-created with heterostructure, vacancy, or substrate effects, which complicate the identification of the strain-activity correlation. Herein, a series of lattice-strained homogeneous NiS_xSe_1−x nanosheets@nanorods hybrids are designed and synthesized by a facile strategy. The NiS_0.5Se_0.5 with ≈2.7% lattice strain exhibits outstanding activity for hydrogen and oxygen evolution reaction (HER/OER), affording low overpotentials of 70 and 257 mV at 10 mA cm⁻², respectively, as well as excellent long-term durability even at a large current density of 100 mA cm⁻² (300 h), significantly superior to other benchmarks and the precious metal catalysts. Experimental and theoretical calculation results reveal that the generated lattice strain decreases the metal d-orbital overlap, leading to a narrower bandwidth and a closer d-band center toward the Fermi level. Thus, NiS_0.5Se_0.5 possesses favorable H* adsorption kinetics for HER and lower energy barriers for OER. This work provides a new insight to regulate the lattice strain of advanced catalyst materials and further improve the performance of energy conversion technologies.     

Synergism of Geometric Construction and Electronic Regulation: 3D Se‐(NiCo)Sx/(OH)x Nanosheets for Highly Efficient Overall Water Splitting

The exploration of highly efficient electrocatalysts for both oxygen and hydrogen generation via water splitting is receiving considerable attention in recent decades. Up till now, Pt‐based catalysts still exhibit the best hydrogen evolution reaction (HER) performance and Ir/Ru‐based oxides are identified as the benchmark for oxygen evolution reaction (OER). However, the high cost and rarity of these materials extremely hinder their large‐scale applications. This paper describes the construction of the ultrathin defect‐enriched 3D Se‐(NiCo)S_x/(OH)_x nanosheets for overall water splitting through a facile Se‐induced hydrothermal treatment. Via Se‐induced fabrication, highly efficient Se‐(NiCo)S_x/(OH)_x nanosheets are successfully fabricated through morphology optimization, defect engineering, and electronic structure tailoring. The as‐prepared hybrids exhibit relatively low overpotentials of 155 and 103 mV at the current density of 10 mA cm^?2 for OER and HER, respectively. Moreover, an overall water‐splitting device delivers a current density of 10 mA cm^?2 for ≈66 h without obvious degradation.