Co Nanoparticles Confined in 3D Nitrogen‐Doped Porous Carbon Foams as Bifunctional Electrocatalysts for Long‐Life Rechargeable Zn–Air Batteries

Proper design and simple preparation of nonnoble bifunctional electrocatalysts with high cost performance and strong durability for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) is highly demanded but still full of enormous challenges. In this work, a spontaneous gas‐foaming strategy is presented to synthesize cobalt nanoparticles confined in 3D nitrogen‐doped porous carbon foams (CoNCF) by simply carbonizing the mixture of citric acid, NH₄Cl, and Co(NO₃)₂·6H₂O. Thanks to its particular 3D porous foam architecture, ultrahigh specific surface area (1641 m² g^?1), and homogeneous distribution of active sites (C–N, Co–N_x, and Co–O moieties), the optimized CoNCF‐1000‐80 (carbonized at 1000 °C, containing 80 mg Co(NO₃)₂·6H₂O in precursors) catalyst exhibits a remarkable bifunctional activity and long‐term durability toward both ORR and OER. Its bifunctional activity parameter (ΔE) is as low as 0.84 V, which is much smaller than that of noble metal catalyst and comparable to state‐of‐the‐art bifunctional catalysts. When worked as an air electrode catalyst in rechargeable Zn–air batteries, a high energy density (797 Wh kg^?1), a low charge/discharge voltage gap (0.75 V), and a long‐term cycle stability (over 166 h) are achieved at 10 mA cm^?2.     

Elucidating the Reaction Mechanism of Mn2+ Electrolyte Additives in Aqueous Zinc Batteries

Aqueous zinc batteries (ZIBs) have attracted considerable attention in recent years because of their high safety and eco-friendly features. Numerous studies have shown that adding Mn²⁺ salts to ZnSO₄ electrolytes enhanced overall energy densities and extended the cycling life of Zn/MnO₂ batteries. It is commonly believed that Mn²⁺ additives in the electrolyte inhibit the dissolution of MnO₂ cathode. To better understand the role of Mn²⁺ electrolyte additives, the ZIB using a Co₃O₄ cathode instead of MnO₂ in 0.3 m MnSO₄ + 3 m ZnSO₄ electrolyte is built to avoid interference from MnO₂ cathode. As expected, the Zn/Co₃O₄ battery exhibits electrochemical characteristics nearly identical to those of Zn/MnO₂ batteries. Operando synchrotron X-ray diffraction (XRD), ex situ X-ray absorption spectroscopy (XAS), and electrochemical analyses are carried out to determine the reaction mechanism and pathway. This work demonstrates that the electrochemical reaction occurring at cathode involves a reversible Mn²⁺/MnO₂ deposition/dissolution process, while a chemical reaction of Zn²⁺/Zn₄SO₄(OH)₆∙5H₂O deposition/dissolution is involved during part of the charge/discharge cycle due to the change in the electrolyte environment. The reversible Zn²⁺/Zn₄SO₄(OH)₆∙5H₂O reaction contributes no capacity and lowers the diffusion kinetics of the Mn²⁺/MnO₂ reaction, which prevents the operation of ZIBs at high current densities.     

Interfacial Engineering of CoN/Co3O4 Heterostructured Hollow Nanoparticles Embedded in N-Doped Carbon Nanowires as a Bifunctional Oxygen Electrocatalyst for Rechargeable Liquid and Flexible all-Solid-State Zn-Air Batteries

The design of economical, efficient, and robust bifunctional oxygen electrocatalysts is greatly imperative for the large-scale commercialization of rechargeable Zn-air battery (ZAB) technology. Herein, the neoteric design of an advanced bifunctional electrocatalyst composed of CoN/Co₃O₄ heterojunction hollow nanoparticles in situ encapsulated in porous N-doped carbon nanowires (denoted as CoN/Co₃O₄ HNPs@NCNWs hereafter) is reported. The simultaneous implementation of interfacial engineering, nanoscale hollowing design, and carbon-support hybridization renders the synthesized CoN/Co₃O₄ HNPs@NCNWs with modified electronic structure, improved electric conductivity, enriched active sites, and shortened electron/reactant transport pathways. Density functional theory computations further demonstrate that the construction of a CoN/Co₃O₄ heterojunction can optimize the reaction pathways and reduce the overall reaction barriers. Thanks to the composition and architectural superiorities, the CoN/Co₃O₄ HNPs@NCNWs exhibit distinguished oxygen reduction reaction and oxygen evolution reaction performance with a low reversible overpotential of 0.725 V and outstanding stability in KOH medium. More encouragingly, the homemade rechargeable liquid and flexible all-solid-state ZABs utilizing CoN/Co₃O₄ HNPs@NCNWs as the air-cathode deliver higher peak power densities, larger specific capacities, and robust cycling stability, exceeding the commercial Pt/C + RuO₂ benchmark counterparts. The concept of heterostructure-induced electronic modification herein may shed light on the rational design of advanced electrocatalysts for sustainable energy applications.     

2D Cobalt Chalcogenide Heteronanostructures Enable Efficient Alkaline Hydrogen Evolution Reaction

The development of high-efficiency non-precious metal electrocatalysts for alkaline electrolyte hydrogen evolution reactions (HER) is of great significance in energy conversion to overcome the limited supply of fossil fuels and carbon emission. Here, a highly active electrocatalyst is presented for hydrogen production, consisting of 2D CoSe₂/Co₃S₄ heterostructured nanosheets along Co₃O₄ nanofibers. The different reaction rate between the ion exchange reaction and redox reaction leads to the heterogeneous volume swelling, promoting the growth of 2D structure. The 2D/1D heteronanostructures enable the improved the electrochemical active area, the number of active sites, and more favorable H binding energy compared to individual cobalt chalcogenides. The roles of the different composition of the heterojunction are investigated, and the electrocatalysts based on the CoSe₂/Co₃S₄@Co₃O₄ exhibited an overpotential as low as 165 mV for 10 mA cm⁻² and 393 mV for 200 mA cm⁻² in 1 m KOH electrolyte. The as-prepared electrocatalysts remained active after 55 h operation without any significant decrease, indicating the excellent long-term operation stability of the electrode. The Faradaic efficiency of hydrogen production is close to 100% at different voltages. This work provides a new design strategy toward Co-based catalysts for efficient alkaline HER.     

Regulated Surface Electronic States of CuNi Nanoparticles through Metal-Support Interaction for Enhanced Electrocatalytic CO2 Reduction to Ethanol

Developing stable catalysts with higher selectivity and activity within a wide potential range is critical for efficiently converting CO₂ to ethanol. Here, the carbon-encapsulated CuNi nanoparticles anchored on nitrogen-doped nanoporous graphene (CuNi@C/N-npG) composite are designedly prepared and display the excellent CO₂ reduction performance with the higher ethanol Faradaic effiency (FE_ethanol ≥ 60%) in a wide potential window (600 mV). The optimal cathodic energy efficiency (47.6%), Faradaic efficiency (84%), and selectivity (96.6%) are also obtained at −0.78 V versus reversible hydrogen electrode (RHE). Combining with the density functional theory (DFT) calculations, it is demonstrated that the stronger metal-support interaction (Ni-N-C) can regulate the surface electronic structure effectively, boosting the electron transfer and stabilizing the active sites (Cu⁰-Cu^δ+) on the surface of CuNi@C/N-npG, finally realizing the controllable transition of reaction intermediates. This work may guide the designs of electrocatalysts with highly catalytic performance for CO₂ reduction to C₂₊ products.     

Recent breakthroughs and perspectives of high-energy layered oxide cathode materials for lithium ion batteries

Ni-rich layered oxides (NRLOs) and Li-rich layered oxides (LRLOs) have been considered as promising next-generation cathode materials for lithium ion batteries (LIBs) due to their high energy density, low cost, and environmental friendliness. However, these two layered oxides suffer from similar problems like capacity fading and different obstacles such as thermal runaway for NRLOs and voltage decay for LRLOs. Understanding the similarities and differences of their challenges and strategies at multiple scales plays a paramount role in the cathode development of advanced LIBs. Herein, we provide a comprehensive review of state-of-the-art progress made in NRLOs and LRLOs based on multi-scale insights into electrons/ions, crystals, particles, electrodes and cells. For NRLOs, issues like structure disorder, cracks, interfacial degradation and thermal runaway are elaborately discussed. Superexchange interaction and magnetic frustration are blamed for structure disorder while strains induced by universal structural collapse result in issues like cracks. For LRLOs, we present an overview of the origin of high capacity followed by local crystal structure, and the root of voltage hysteresis/decay, which are ascribed to reduced valence of transition metal ions, phase transformation, strains, and microstructure degradation. We then discuss failure mechanism in full cells with NRLO cathode and commercial challenges of LRLOs. Moreover, strategies to improve the performance of NRLOs and LRLOs from different scales such as ion-doping, microstructure designs, particle modifications, and electrode/electrolyte interface engineering are summarized. Dopants like Na, Mg and Zr, delicate gradient concentration design, coatings like spinel LiNi_0.5Mn_1.5O₄ or Li₃PO₄ and novel electrolyte formulas are highly desired. Developing single crystals for NRLOs and new crystallographic structure or heterostructure for LRLOs are also emphasized. Finally, remaining challenges and perspectives are outlined for the development of NRLOs and LRLOs. This review offers fundamental understanding and future perspectives towards high-performance cathodes for next-generation LIBs.