An Ion-Engineering Strategy to Design Hollow FeCo/CoFe2O4 Microspheres for High-Performance Microwave Absorption

Although assembled hollow architectures have received considerable attention as lightweight functional materials, their uncontrollable self-aggregation and tedious synthetic methods hinder precise construction and modulation. Therefore, this study proposes a bi-ion synergistic regulation strategy to design assembled hollow-shaped cobalt spinel oxide microspheres. Dominated by the coordination-etching effects of F⁻ and the hydrolysis-complex contributions of NH₄⁺, the unique construction is formed attributed to the dynamic cycles between metal complexes and precipitates. Meanwhile, their basic structures are perfectly retained after reduction treatment, enabling FeCo/CoFe₂O₄ bimagnetic system to be obtained. Subsequently, in-depth analyses are conducted. Investigations reveal that multiscale magnetic coupling networks and enriched air-material heterointerfaces contribute to the remarkable magnetic-dielectric behavior, supported by the advanced off-axis electron holography technique. Consequently, the obtained FeCo/CoFe₂O₄ composites exhibit excellent microwave absorption performances with minimal reflection losses (RL_min) as high as −51.6 dB, an effective absorption bandwidth (EAB) of 4.7 GHz, and a matched thickness of 1.4 mm. Thus, this work provides an informative guide for rationally assembling building blocks into hollow architectures as advanced microwave absorbers through bi-ion and even multi-ion synergistic engineering mechanisms.     

低密度Fe3O4/中孔炭微球复合材料的可规模制备及吸波性能

采用喷雾干燥法制备出中孔炭微球(MCMSs), 进一步通过液相浸渍得到磁性Fe₃O₄/MCMSs纳米复合材料, 系统研究了复合材料的形貌结构和吸波性能。结果发现, Fe₃O₄/MCMSs复合材料具有优异的流动性和低密度(0.24~0.33 g/cm³)特征, 其中Fe₃O₄纳米颗粒高度分散在MCMSs中孔孔道内。复合材料具有较高的比表面积(548~735 m²/g), 可以促进多种介电弛豫的形成。在2~18 GHz范围内, 复合材料以介电损耗为主, 在12.6 GHz处具有最大反射率-25 dB, 小于-10 dB的带宽达4.7 GHz。复合材料优异的吸波性能可以归因于均相分布的Fe₃O₄纳米颗粒和中孔炭微球的协同作用, 在增大界面弛豫和电磁波散射的同时, 改善了阻抗匹配, 减少了电磁波在吸波层表面的反射。     

Multifunctional Nanocrystalline-Assembled Porous Hierarchical Material and Device for Integrating Microwave Absorption,Electromagnetic Interference Shielding,and Energy Storage

Multifunctional applications including efficient microwave absorption and electromagnetic interference (EMI) shielding as well as excellent Li-ion storage are rarely achieved in a single material. Herein, a multifunctional nanocrystalline-assembled porous hierarchical NiO@NiFe₂O₄/reduced graphene oxide (rGO) heterostructure integrating microwave absorption, EMI shielding, and Li-ion storage functions is fabricated and tailored to develop high-performance energy conversion and storage devices. Owing to its structural and compositional advantages, the optimized NiO@NiFe₂O₄/15rGO achieves a minimum reflection loss of −55 dB with a matching thickness of 2.3 mm, and the effective absorption bandwidth is up to 6.4 GHz. The EMI shielding effectiveness reaches 8.69 dB. NiO@NiFe₂O₄/15rGO exhibits a high initial discharge specific capacity of 1813.92 mAh g⁻¹, which reaches 1218.6 mAh g⁻¹ after 289 cycles and remains at 784.32 mAh g⁻¹ after 500 cycles at 0.1 A g⁻¹. In addition, NiO@NiFe₂O₄/15rGO demonstrates a long cycling stability at high current densities. This study provides an insight into the design of advanced multifunctional materials and devices and provides an innovative method of solving current environmental and energy problems.     

NiO/Ni Heterojunction on N-Doped Hollow Carbon Sphere with Balanced Dielectric Loss for Efficient Microwave Absorption

Hollow carbon spheres are potential candidates for lightweight microwave absorbers. However, the skin effect of pure carbon-based materials frequently induces a terrible impedance mismatching issue. Herein, small-sized NiO/Ni particles with heterojunctions on the N-doped hollow carbon spheres (NHCS@NiO/Ni) are constructed using SiO₂ as a sacrificing template. The fabricated NHCS@NiO/Ni displayed excellent microwave absorbability with a minimum reflection loss of −44.04 dB with the matching thickness of 2 mm and a wider efficient absorption bandwidth of 4.38 GHz with the thickness of 1.7 mm, superior to most previously reported hollow absorbers. Experimental results demonstrated that the excellent microwave absorption property of the NHCS@NiO/Ni are attributed to balanced dielectric loss and optimized impedance matching characteristic due to the presence of NiO/Ni heterojunctions. Theoretical calculations suggested that the redistribution of charge at the interfaces and formation of dipoles induced by N dopants and defects are responsible for the enhanced conduction and polarization losses of NHCS@NiO/Ni. The simulations for the surface current and power loss densities reveal that the NHCS@NiO/Ni has‑ applicable attenuation ability toward microwave under the practical application scenario. This work paves an efficient way for the reasonable design of small-sized particles with well-defined heterojunctions on hollow nanostructures for high-efficiency microwave absorption.     

Hollow Functional Materials Derived from Metal–Organic Frameworks: Synthetic Strategies,Conversion Mechanisms,and Electrochemical Applications

Hollow materials derived from metal–organic frameworks (MOFs), by virtue of their controllable configuration, composition, porosity, and specific surface area, have shown fascinating physicochemical properties and widespread applications, especially in electrochemical energy storage and conversion. Here, the recent advances in the controllable synthesis are discussed, mainly focusing on the conversion mechanisms from MOFs to hollow‐structured materials. The synthetic strategies of MOF‐derived hollow‐structured materials are broadly sorted into two categories: the controllable synthesis of hollow MOFs and subsequent pyrolysis into functional materials, and the controllable conversion of solid MOFs with predesigned composition and morphology into hollow structures. Based on the formation processes of hollow MOFs and the conversion processes of solid MOFs, the synthetic strategies are further conceptually grouped into six categories: template‐mediated assembly, stepped dissolution–regrowth, selective chemical etching, interfacial ion exchange, heterogeneous contraction, and self‐catalytic pyrolysis. By analyzing and discussing 14 types of reaction processes in detail, a systematic mechanism of conversion from MOFs to hollow‐structured materials is exhibited. Afterward, the applications of these hollow structures as electrode materials for lithium‐ion batteries, hybrid supercapacitors, and electrocatalysis are presented. Finally, an outlook on the emergent challenges and future developments in terms of their controllable fabrications and electrochemical applications is further discussed.     

Synthesis and Photoluminescence Properties of Eu3+‐Doped Silica@Coordination Polymer Core–Shell Structures and Their Calcinated Silica@Gd2O3:Eu and Hollow Gd2O3:Eu Microsphere Products

The conjugation of Eu³⁺‐doped coordination polymers constructed from Gd³⁺ and isophthalic acid (H₂IPA) with silica particles is investigated for the production of luminescent microspheres. A series of doping ratio‐controlled silica@coordination polymer core–shell spheres is easily synthesized by altering the amounts of metal nodes used in the reactions, where the ratios of Gd³⁺ and Eu³⁺ are 10:0 ( 1a ), 9:1 ( 1b ), 8:2 ( 1c ), 7:3 ( 1d ), 5:5 ( 1e ), and 0:10 ( 1f ). The formation of monodisperse uniform core–shell structures is achieved throughout the entirety of a series. Investigations of the photoluminescence property of the resulting series of silica@coordination polymer core–shell spheres reveal that 20% Eu³⁺‐doped product ( 1c ) has the strongest emission intensity. The subsequent calcination process on the silica@coordination polymer core–shell structures ( 1a ‐ f ) results in the formation of a series of doping ratio‐controlled silica@Gd₂O₃:Eu core–shell microspheres ( 2a ‐ f ) with uniform shell thickness. During the calcination step, the coordination polymers within silica@coordination polymer core–shells are transformed into metal oxides, resulting in silica@Gd₂O₃:Eu core–shell structures. The final etching process on the silica@Gd₂O₃:Eu core–shell microspheres ( 2a ‐ f ) produces a series of hollow Gd₂O₃:Eu microspheres ( 3a ‐ f ) as a result of the elimination of silica cores. The luminescence intensities of silica@Gd₂O₃:Eu core–shell ( 2a ‐ f ) and hollow Gd₂O₃:Eu microspheres ( 3a ‐ f ) also vary depending upon the doping ratio of Eu³⁺ ions.