Carbonized Polymer Dots with Controllable N,O Functional Groups as Electrolyte Additives to Achieve Stable Li Metal Batteries

Electrolyte additive is an effective strategy to inhibit the uncontrolled growth of Li dendrites for lithium metal batteries (LMBs). However, most of the additives are complex synthesis and prone to decompose in cycling. Herein, in order to guide the homogeneous deposition of Li⁺, carbonized polymer dots (CPDs) as electrolyte additives are successfully designed and synthesized by microwave (M-CPDs) and hydrothermal (H-CPDs) approaches. The controllable functional groups containing N or O (especially pyridinic-N, pyrrolic-N, and carboxyl group) enable CPDs to keep stable in electrolytes for at least 3 months. Meanwhile, the clusters formed between CPDs and Li⁺ through electrostatic interaction effectively guide the uniform Li dispersion and limit the “tip effect” and dendrite formation. Moreover, as lithiophilic groups increase, the strong electrostatic interference for the solvation effect of Li⁺ in the electrolyte is formed, which induces faster Li⁺ diffusion/transfer. As expected, H-CPDs achieve the ultra-even Li⁺ transfer. The corresponding Li//LiFePO₄ full cell delivers a high capacity retention rate of 93.8% after 200 cycles, which is much higher than that of the cells without additives (61.2%) and with M-CPDs (83.7%) as additives. The strategy in this work provides a theoretical direction for CPDs as electrolyte additives used in energy storage devices.     

Dendrite‐Free Lithium Deposition via a Superfilling Mechanism for High‐Performance Li‐Metal Batteries

Uncontrollable Li dendrite growth and low Coulombic efficiency severely hinder the application of lithium metal batteries. Although a lot of approaches have been developed to control Li deposition, most of them are based on inhibiting lithium deposition on protrusions, which can suppress Li dendrite growth at low current density, but is inefficient for practical battery applications, with high current density and large area capacity. Here, a novel leveling mechanism based on accelerating Li growth in concave fashion is proposed, which enables uniform and dendrite‐free Li plating by simply adding thiourea into the electrolyte. The small thiourea molecules can be absorbed on the Li metal surface and promote Li growth with a superfilling effect. With 0.02 m thiourea added in the electrolyte, Li | Li symmetrical cells can be cycled over 1000 cycles at 5.0 mA cm^?2, and a full cell with LiFePO₄ | Li configuration can even maintain 90% capacity after 650 cycles at 5.0 C. The superfilling effect is also verified by computational chemistry and numerical simulation, and can be expanded to a series of small chemicals using as electrolyte additives. It offers a new avenue to dendrite‐free lithium deposition and may also be expanded to other battery chemistries.     

Lithiophilic Nanowire Guided Li Deposition in Li Metal Batteries

Lithium (Li) metal batteries (LMBs) provide superior energy densities far beyond current Li-ion batteries (LIBs) but practical applications are hindered by uncontrolled dendrite formation and the build-up of dead Li in “hostless” Li metal anodes. To circumvent these issues, we created a 3D framework of a carbon paper (CP) substrate decorated with lithiophilic nanowires (silicon (Si), germanium (Ge), and SiGe alloy NWs) that provides a robust host for efficient stripping/plating of Li metal. The lithiophilic Li₂₂Si₅, Li₂₂(Si_0.5Ge_0.5)_5, and Li₂₂Ge₅ formed during rapid Li melt infiltration prevented the formation of dead Li and dendrites. Li₂₂Ge₅/Li covered CP hosts delivered the best performance, with the lowest overpotentials of 40 mV (three times lower than pristine Li) when cycled at 1 mA cm⁻²/1 mAh cm⁻² for 1000 h and at 3 mA cm⁻²/3 mAh cm⁻² for 500 h. Ex situ analysis confirmed the ability of the lithiophilic Li₂₂Ge₅ decorated samples to facilitate uniform Li deposition. When paired with sulfur, LiFePO_4, and NMC811 cathodes, the CP-LiGe/Li anodes delivered 200 cycles with 82%, 93%, and 90% capacity retention, respectively. The discovery of the highly stable, lithiophilic NW decorated CP hosts is a promising route toward stable cycling LMBs and provides a new design motif for hosted Li metal anodes.     

Highly Stable Potassium Metal Anodes with Controllable Thickness and Area Capacity

K metal battery is a kind of high-energy-density storage device with economic advantages. However, due to the dendrite growth and difficult processing characteristics, it is difficult to prepare stable K metal anode with thin thickness and fixed area capacity, which severely limits its development. In this work, a multi-functional 3D skeleton (rGCA) is synthesized by simple vacuum filtration and thermal reduction, and K metal anodes with controllable thickness and area capacity (K content) can be fabricated by changing the raw material mass and graphene layer spacing of rGCA. Moreover, the graphene sheet layer of rGCA can relax stress and relieve volume expansion; carbon nanotubes can serve as the fast transport channel of electrons, reducing internal impedance and local current density; Ag nanoparticles can induce the uniform nucleation and deposition of K⁺. The K metal composite anodes (rGCA-K) based on the conductive skeleton can effectively suppress dendrites and exhibit excellent electrochemical performance in symmetric and full cells. The controllable fabrication process of stable K metal anode is expected to help K metal batteries move toward the stage of commercial production.     

Temperature-Dependent Chemical and Physical Microstructure of Li Metal Anodes Revealed through Synchrotron-Based Imaging Techniques

The Li metal anode has been long sought-after for application in Li metal batteries due to its high specific capacity (3860 mAh g⁻¹) and low electrochemical potential (−3.04 V vs the standard hydrogen electrode). Nevertheless, the behavior of Li metal in different environments has been scarcely reported. Herein, the temperature-dependent behavior of Li metal anodes in carbonate electrolyte from the micro- to macroscales are explored with advanced synchrotron-based characterization techniques such as X-ray computed tomography and energy-dependent X-ray fluorescence mapping. The importance of testing methodology is exemplified, and the electrochemical behavior and failure modes of Li anodes cycled at different temperatures are discussed. Moreover, the origin of cycling performance at different temperatures is identified through analysis of Coulombic efficiencies, surface morphology, and the chemical composition of the solid electrolyte interphase in quasi-3D space with energy-dependent X-ray fluorescence mappings coupled with micro-X-ray absorption near edge structure. This work provides new characterization methods for Li metal anodes and serves as an important basis toward the understanding of their electrochemical behavior in carbonate electrolytes at different temperatures.     

Ultrafine Silver Nanoparticles for Seeded Lithium Deposition toward Stable Lithium Metal Anode

To exploit the high energy density of the lithium (Li) metal battery, it is imperative to address the dendrite growth and interface instability of the anode. 3D hosts for Li metal are expected to suppress the growth of Li dendrites. Heterogeneous seeds are effective in guiding Li deposition and realizing spatial control over Li nucleation. Herein, this study shows that ultrafine silver (Ag) nanoparticles, which are synthesized via a novel rapid Joule heating method, can serve as nanoseeds to direct the deposition of Li within the 3D host materials, resolving the problems of the Li metal anode. By optimizing the Joule heating method, ultrafine Ag nanoparticles (≈40 nm) are homogeneously anchored on carbon nanofibers. The Ag nanoseeds effectively reduce the nucleation overpotential of Li and guide the Li deposition in the 3D carbon matrix uniformly, free from the dendrites. A stable and reversible Li metal anode is achieved in virtue of the Ag nanoseeds in the 3D substrate, showing a low overpotential (≈0.025 V) for a long cycle life. The ultrafine nanoseeds achieved by rapid Joule heating render uniform deposition of Li metal anode in 3D hosts, promising a safe and long‐life Li metal battery for high‐energy applications.     

Functional Separator Enabled by Covalent Organic Frameworks for High-Performance Li Metal Batteries

Uncontrolled ion transport and susceptible SEI films are the key factors that induce lithium dendrite growth, which hinders the development of lithium metal batteries (LMBs). Herein, a TpPa-2SO₃H covalent organic framework (COF) nanosheet adhered cellulose nanofibers (CNF) on the polypropylene separator (COF@PP) is successfully designed as a battery separator to respond to the aforementioned issues. The COF@PP displays dual-functional characteristics with the aligned nanochannels and abundant functional groups of COFs, which can simultaneously modulate ion transport and SEI film components to build robust lithium metal anodes. The Li//COF@PP//Li symmetric cell exhibits stable cycling over 800 h with low ion diffusion activation energy and fast lithium ion transport kinetics, which effectively suppresses the dendrite growth and improves the stability of Li+ plating/stripping. Moreover, The LiFePO4//Li cells with COF@PP separator deliver a high discharge capacity of 109.6 mAh g⁻¹ even at a high current density of 3 C. And it exhibits excellent cycle stability and high capacity retention due to the robust LiF-rich SEI film induced by COFs. This COFs-based dual-functional separator promotes the practical application of lithium metal batteries.     

The Mechanism of Li Deposition on the Cu Substrates in the Anode-Free Li Metal Batteries

Due to the rapid growth in the demand for high-energy-density Lithium (Li) batteries and insufficient global Li reserves, the anode-free Li metal batteries are receiving increasing attention. Various strategies, such as surface modification and structural design of copper (Cu) current collectors, have been proposed to stabilize the anode-free Li metal batteries. Unfortunately, the mechanism of Li deposition on the Cu surfaces with the different Miller indices is poorly understood, especially on the atomic scale. Here, the large-scale molecular dynamics simulations of Li deposition on the Cu substrates are performed in the anode-free Li metal batteries. The results show that the surface properties of the Li panel can be altered through the different Cu substrate surfaces. Through surface similarity analysis, potential energy distributions,and inhomogeneous deposition simulations, it is found that the Li atoms exhibit different potential energy variances and kinetic characteristics on the different Cu surfaces. Furthermore, a proposal to reduce the fraction of the (110) facet in commercial Cu foils is made to improve the reversibility and stability of Li plating/stripping in the anode-free Li metal batteries.     

Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels

Li anodes have been rapidly developed in recent years owing to the rising demand for higher‐energy‐density batteries. However, the safety issues induced by dendrites hinder the practical applications of Li anodes. Here, Li metal anodes stabilized by regulating lithium plating/stripping in vertically aligned microchannels are reported. The current density distribution and morphology evolution of the Li deposits on porous Cu current collectors are systematically analyzed. Based on simulations in COMSOL Multiphysics, the tip effect leads to preferential deposition on the microchannel walls, thus taking full advantage of the lightening rod theory of classical electromagnetism for restraining growth of Li dendrites. The Li anode with a porous Cu current collector achieves an enhanced cycle stability and a higher average Coulombic efficiency of 98.5% within 200 cycles. In addition, the resultant LiFePO₄/Li full battery demonstrates excellent rate capability and stable cycling performance, thus demonstrating promise as a current collector for high‐energy‐density, safe rechargeable Li batteries.     

Dendrite‐Free Sodium‐Metal Anodes for High‐Energy Sodium‐Metal Batteries

Sodium (Na) metal is one of the most promising electrode materials for next‐generation low‐cost rechargeable batteries. However, the challenges caused by dendrite growth on Na metal anodes restrict practical applications of rechargeable Na metal batteries. Herein, a nitrogen and sulfur co‐doped carbon nanotube (NSCNT) paper is used as the interlayer to control Na nucleation behavior and suppress the Na dendrite growth. The N‐ and S‐containing functional groups on the carbon nanotubes induce the NSCNTs to be highly “sodiophilic,” which can guide the initial Na nucleation and direct Na to distribute uniformly on the NSCNT paper. As a result, the Na‐metal‐based anode (Na/NSCNT anode) exhibits a dendrite‐free morphology during repeated Na plating and striping and excellent cycling stability. As a proof of concept, it is also demonstrated that the electrochemical performance of sodium–oxygen (Na–O₂) batteries using the Na/NSCNT anodes show significantly improved cycling performances compared with Na–O₂ batteries with bare Na metal anodes. This work opens a new avenue for the development of next‐generation high‐energy‐density sodium‐metal batteries.     

Highly Elastic Polyrotaxane Binders for Mechanically Stable Lithium Hosts in Lithium‐Metal Batteries

Despite their unparalleled theoretical capacity, lithium‐metal anodes suffer from well‐known indiscriminate dendrite growth and parasitic surface reactions. Conductive scaffolds with lithium uptake capacity are recently highlighted as promising lithium hosts, and carbon nanotubes (CNTs) are an ideal candidate for this purpose because of their capability of percolating a conductive network. However, CNT networks are prone to rupture easily due to a large tensile stress generated during lithium uptake–release cycles. Herein, CNT networks integrated with a polyrotaxane‐incorporated poly(acrylic acid) (PRPAA) binder via supramolecular interactions are reported, in which the ring‐sliding motion of the polyrotaxanes endows extraordinary stretchability and elasticity to the entire binder network. In comparison to a control sample with inelastic binder (i.e., poly(vinyl alcohol)), the CNT network with PRPAA binder can endure a large stress during repeated lithium uptake–release cycles, thereby enhancing the mechanical integrity of the corresponding electrode over battery cycling. As a result, the PRPAA‐incorporated CNT network exhibits substantially improved cyclability in lithium–copper asymmetric cells and full cells paired with olivine‐LiFePO₄, indicating that high elasticity enabled by mechanically interlocked molecules such as polyrotaxanes can be a useful concept in advancing lithium‐metal batteries.     

Regulating Lithium Nucleation via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode

Li metal is demonstrated as one of the most promising anode materials for high energy density batteries. However, uncontrollable Li dendrite growth and repeated growth of solid electrolyte interface during the charge/discharge process lead to safety issues and capacity decay, preventing its practical application. To address these issues, an effective strategy is to realize uniform Li nucleation. Here, a stable lithium–scaffold composite electrode (CC/CNT@Li) is designed by melting of lithium metal into 3D interconnected lithiophilic carbon nanotube (CNT) on a porous carbon cloth (CC). The 3D interconnected CNTs successfully change the lithiophobic CC into lithiophilic nature, reducing the polarization of the electrode, ensuring homogenous Li nucleation and continuous smooth Li plating. The CNTs on the surface of CC provide adequate Li nucleation sites and reduce the areal current density to avoid Li dendrite growth. The 3D porous structure of CC/CNT offers enough free room for buffering the huge volume change during Li plating/stripping. The CC/CNT@Li composite anode exhibits dendrite‐free morphology and superior cycling performances over 500 h with low voltage hysteresis of 18, 23, and 71 mV at the current density of 1, 2, and 5 mA cm^?2, respectively.     

Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries

Lithium‐metal batteries (LMBs), as one of the most promising next‐generation high‐energy‐density storage devices, are able to meet the rigid demands of new industries. However, the direct utilization of metallic lithium can induce harsh safety issues, inferior rate and cycle performance, or anode pulverization inside the cells. These drawbacks severely hinder the commercialization of LMBs. Here, an up‐to‐date review of the behavior of lithium ions upon deposition/dissolution, and the failure mechanisms of lithium‐metal anodes is presented. It has been shown that the primary causes consist of the growth of lithium dendrites due to large polarization and a strong electric field at the vicinity of the anode, the hyperactivity of metallic lithium, and hostless infinite volume changes upon cycling. The recent advances in liquid organic electrolyte (LOE) systems through modulating the local current density, anion depletion, lithium flux, the anode–electrolyte interface, or the mechanical strength of the interlayers are highlighted. Concrete strategies including tailoring the anode structures, optimizing the electrolytes, building artificial anode–electrolyte interfaces, and functionalizing the protective interlayers are summarized in detail. Furthermore, the challenges remaining in LOE systems are outlined, and the future perspectives of introducing solid‐state electrolytes to radically address safety issues are presented.     

Heterostructured Interface Enables Uniform Zinc Deposition for High-Performance Zinc-Ion Batteries

Zinc metal has considerable potential as a high-energy anode material for aqueous batteries due to its high theoretical capacity and environmental friendliness. However, dendrite growth and parasitic reactions at the electrode/electrolyte interface remain two serious problems for the Zn metal anode. Here, the heterostructured interface of ZnO rod array and CuZn₅ layer is fabricated on the Zn substrate (ZnCu@Zn) to address these two issues. The zincophilic CuZn₅ layer with abundant nucleation sites ensures the initial uniform Zn nucleation process during cycling. Meanwhile, the ZnO rod array grown on the surface of the CuZn₅ layer can guide the subsequent homogeneous Zn deposition via spatial confinement and electrostatic attraction effects, leading to the dendrite-free Zn electrodeposition process. Consequently, the derived ZnCu@Zn anode exhibits an ultra-long lifespan of up to 2500 h with symmetric cells at the current density and capacity of 0.5 mA cm⁻²/0.5 mA h cm⁻². Besides, a remarkable cyclability (75% retention for 2500 cycles at 2 A g⁻¹) is achieved in the ZnCu@Zn||MnO₂ full cell with a capacity of 139.7 mA h g⁻¹. This heterostructured interface with specific functional layers provides a feasible strategy for the design of high-performance metal anodes.     

Lithiophilic LiC6 Layers on Carbon Hosts Enabling Stable Li Metal Anode in Working Batteries

Lithium (Li) metal‐based battery is among the most promising candidates for next‐generation rechargeable high‐energy‐density batteries. Carbon materials are strongly considered as the host of Li metal to relieve the powdery/dendritic Li formation and large volume change during repeated cycles. Herein, we describe the formation of a thin lithiophilic LiC₆ layer between carbon fibers (CFs) and metallic Li in Li/CF composite anode obtained through a one‐step rolling method. An electron deviation from Li to carbon elevates the negativity of carbon atoms after Li intercalation as LiC₆, which renders stronger binding between carbon framework and Li ions. The Li/CF | Li/CF batteries can operate for more than 90 h with a small polarization voltage of 120 mV at 50% discharge depth. The Li/CF | sulfur pouch cell exhibits a high discharge capacity of 3.25 mAh cm^?2 and a large capacity retention rate of 98% after 100 cycles at 0.1 C. It is demonstrated that the as‐obtained Li/CF composite anode with lithiophilic LiC₆ layers can effectively alleviate volume expansion and hinder dendritic and powdery morphology of Li deposits. This work sheds fresh light on the role of interfacial layers between host structure and Li metal in composite anode for long‐lifespan working batteries.     

Early Lithium Plating Behavior in Confined Nanospace of 3D Lithiophilic Carbon Matrix for Stable Solid‐State Lithium Metal Batteries

Considerable efforts are devoted to relieve the critical lithium dendritic and volume change problems in the lithium metal anode. Constructing uniform Li⁺ distribution and lithium “host” are shown to be the most promising strategies to drive practical lithium metal anode development. Herein, a uniform Li nucleation/growth behavior in a confined nanospace is verified by constructing vertical graphene on a 3D commercial copper mesh. The difference of solid‐electrolyte interphase (SEI) composition and lithium growth behavior in the confined nanospace is further demonstrated by in‐depth X‐ray photoelectron spectrometer (XPS) and line‐scan energy dispersive X‐ray spectroscopic (EDS) methods. As a result, a high Columbic efficiency of 97% beyond 250 cycles at a current density of 2 mA cm^?2 and a prolonged lifespan of symmetrical cell (500 cycles at 5 mA cm^?2) can be easily achieved. More meaningfully, the solid‐state lithium metal cell paired with the composite lithium anode and LiNi_0.5Co_0.2Mn_0.3O₂ (NCM) as the cathode also demonstrate reduced polarization and extended cycle. The present confined nanospace–derived hybrid anode can further promote the development of future all solid‐state lithium metal batteries.