Controllable Exfoliation of MOF-Derived Van Der Waals Superstructure into Ultrathin 2D B/N Co-Doped Porous Carbon Nanosheets: A Superior Catalyst for Ambient Ammonia Electrosynthesis

The electrocatalytic nitrogen reduction reaction (NRR) to synthesize NH₃ under ambient conditions is a promising alternative route to the conventional Haber–Bosch process, but it is still a great challenge to develop electrocatalysts’ high Faraday efficiency and ammonia yield. Herein, a facile and efficient exfoliation strategy to synthesize ultrathin 2D boron and nitrogen co-doped porous carbon nanosheets (B/N C NS) via a metal–organic framework (MOF)-derived van der Waals superstructure, is reported. The results of experiments and theoretical calculations show that the doping of boron and nitrogen can modulate the electronic structure of the adjacent carbon atoms; which thus, promotes the competitive adsorption of nitrogen and reduces the energy required for ammonia synthesis. The B/N C NS exhibits excellent catalytic performance and stability in electrocatalytic NRR, with a yield rate of 153.4 µg·h⁻¹·mg⁻¹ cat and a Faraday efficiency of 33.1%, which is better than most of the reported NRR electrocatalysts. The ammonia yield of B/N C NS can maintain 92.7% of the initial NRR activity after 48 h stability test. The authors’ controllable exfoliation strategy using MOF-derived van der Waals superstructure can provide a new insight for the synthesis of other 2D materials.     

Identifying the Origin of Ti3+ Activity toward Enhanced Electrocatalytic N2 Reduction over TiO2 Nanoparticles Modulated by Mixed-Valent Copper

The ambient electrocatalytic N₂ reduction reaction (NRR) enabled by TiO₂ has attracted extensive recent attention. Previous studies suggest the formation of Ti³⁺ in TiO₂ can significantly improve the NRR activity, but it still remains unclear what kinds of Ti³⁺ are effective. Herein, it is demonstrated that mixed-valent Cu acts as an effective dopant to modulate the oxygen vacancy (V_O) concentration and Ti³⁺ formation, which markedly improves the electrocatalytic NRR performance. In 0.5 m LiClO₄, this electrocatalyst attains a high Faradic efficiency of 21.99% and a large NH₃ yield of 21.31 µg h⁻¹ mg_cat.⁻¹ at –0.55 V vs reversible hydrogen electrode, which even surpasses most reported Ti-based NRR electrocatalysts. Using density function theory calculations, it is evidenced that mixed-valent Cu ions modulate the TiO₂ (101) surface with multiple oxygen vacancies, which is beneficial for generating different Ti³⁺ 3d¹ defect states localized below the Fermi energy. N₂ activation and adsorption are effectively strengthened when Ti³⁺ 3d¹ defect states present the splitting of e_g and t_2g orbitals, which can be modulated by its coordination structure. The synergistic roles of the three ion pairs formed by the V_O defect, including Cu¹⁺–Ti⁴⁺, Ti³⁺–Ti⁴⁺ and Ti³⁺–Ti³⁺, are together responsible for the enhanced NRR performance.     

A General Strategy to Glassy M-Te (M = Ru,Rh, Ir) Porous Nanorods for Efficient Electrochemical N2 Fixation

Electrochemical conversion of nitrogen (N₂) into value-added ammonia (NH₃) is highly desirable yet formidably challenging due to the extreme inertness of the N₂ molecule, which makes the development of a robust electrocatalyst prerequisite. Herein, a new class of bullet-like M-Te (M = Ru, Rh, Ir) glassy porous nanorods (PNRs) is reported as excellent electrocatalysts for N₂ reduction reaction (NRR). The optimized IrTe₄ PNRs present superior activity with the highest NH₃ yield rate (51.1 µg h⁻¹ mg⁻¹_cat.) and Faraday efficiency (15.3%), as well as long-term stability of up to 20 consecutive cycles, making them among the most active NRR electrocatalysts reported to date. Both the N₂ temperature-programmed desorption and valence band X-ray photoelectron spectroscopy data show that the strong chemical adsorption of N₂ is the key for enhancing the NRR and suppressing the hydrogen evolution reaction of IrTe₄ PNRs. Density functional theory calculations comprehensively identify that the superior adsorption strength of IrTe₄ adsorptions originates from the synergistic collaboration between electron-rich Ir and the highly electroactive surrounding Te atoms. The optimal adsorption of both N₂ and H₂O in alkaline media guarantees the superior consecutive NRR process. This work opens a new avenue for designing high-performance NRR electrocatalysts based on glassy materials.     

Electrochemical Ammonia Synthesis via Nitrogen Reduction Reaction on a MoS2 Catalyst: Theoretical and Experimental Studies

The discovery of stable and noble‐metal‐free catalysts toward efficient electrochemical reduction of nitrogen (N₂) to ammonia (NH₃) is highly desired and significantly critical for the earth nitrogen cycle. Here, based on the theoretical predictions, MoS₂ is first utilized to catalyze the N₂ reduction reaction (NRR) under room temperature and atmospheric pressure. Electrochemical tests reveal that such catalyst achieves a high Faradaic efficiency (1.17%) and NH₃ yield (8.08 × 10^?11 mol s^?1 cm^?1) at ?0.5 V versus reversible hydrogen electrode in 0.1 m Na₂SO₄. Even in acidic conditions, where strong hydrogen evolution reaction occurs, MoS₂ is still active for the NRR. This work represents an important addition to the growing family of transition‐metal‐based catalysts with advanced performance in NRR.     

Carbon‐Based Metal‐Free Catalysts for Electrocatalytic Reduction of Nitrogen for Synthesis of Ammonia at Ambient Conditions

The electrocatalytic nitrogen reduction reaction (NRR) is a promising catalytic system for N₂ fixation in ambient conditions. Currently, metal‐based catalysts are the most widely studied catalysts for electrocatalytic NRR. Unfortunately, the low selectivity and poor resistance to acids and bases, and the low Faradaic efficiency, production rate, and stability of metal‐based catalysts for NRR make them uncompetitive for the synthesis of ammonia in comparison to the industrial Haber–Bosch process. Inspired by applications of carbon‐based metal‐free catalysts (CMFCs) for the oxygen reduction reaction (ORR) and CO₂ reduction reaction (CO₂RR), the studies of these CMFCs in electrocatalytic NRR have attracted great attention in the past year. However, due to the differences in electrocatalytic NRR, there are several critical issues that need to be addressed in order to achieve rational design of advanced carbon‐based metal‐free electrocatalysts to improve activity, selectivity, and stability for NRR. Herein, the recent developments in the field of carbon‐based metal‐free NRR catalysts are presented, along with critical issues, challenges, and perspectives concerning metal‐free catalysts for electrocatalytic reduction of nitrogen for synthesis of ammonia at ambient conditions.     

Formation of B?N?C Coordination to Stabilize the Exposed Active Nitrogen Atoms in g‐C3N4 for Dramatically Enhanced Photocatalytic Ammonia Synthesis Performance

It is an important issue that exposed active nitrogen atoms (e.g., edge or amino N atoms) in graphitic carbon nitride (g‐C₃N₄) could participate in ammonia (NH₃) synthesis during the photocatalytic nitrogen reduction reaction (NRR). Herein, the experimental results in this work demonstrate that the exposed active N atoms in g‐C₃N₄ nanosheets can indeed be hydrogenated and contribute to NH₃ synthesis during the visible‐light photocatalytic NRR. However, these exposed N atoms can be firmly stabilized through forming B? N? C coordination by means of B‐doping in g‐C₃N₄ nanosheets (BCN) with a B‐doping content of 13.8 wt%. Moreover, the formed B? N? C coordination in g‐C₃N₄ not only effectively enhances the visible‐light harvesting and suppresses the recombination of photogenerated carriers in g‐C₃N₄, but also acts as the catalytic active site for N₂ adsorption, activation, and hydrogenation. Consequently, the as‐synthesized BCN exhibits high visible‐light‐driven photocatalytic NRR activity, affording an NH₃ yield rate of 313.9 µmol g^?1 h^?1, nearly 10 times of that for pristine g‐C₃N₄. This work would be helpful for designing and developing high‐efficiency metal‐free NRR catalysts for visible‐light‐driven photocatalytic NH₃ synthesis.     

FeOOH quantum dots decorated graphene sheet: An efficient electrocatalyst for ambient N2 reduction

Electrochemical N₂ reduction offers a promising alternative to the Haber-Bosch process for sustainable NH₃ synthesis at ambient conditions, but it needs efficient catalysts for the N₂ reduction reaction (NRR). Here, we report that FeOOH quantum dots decorated graphene sheet acts as a superior catalyst toward enhanced electrocatalytic N₂ reduction to NH₃ under ambient conditions. In 0.1 M LiClO₄, this hybrid attains a large NH₃ yield rate and a high Faradaic efficiency of 27.3 µg·h⁻¹·mg⁻¹_cat. and 14.6% at −0.4 V vs. reversible hydrogen electrode, respectively, rivalling the current efficiency of all Fe-based NRR electrocatalysts in aqueous media. It also shows strong durability during the electrolytic process.

     

Electrochemical Fabrication of Porous Au Film on Ni Foam for Nitrogen Reduction to Ammonia

Electrochemical reduction of N₂ to NH₃ provides an alternative strategy to replace the industrial Haber–Bosch process for facile and sustainable production of NH₃. The development of efficient electrocatalysts for the nitrogen reduction reaction (NRR) is highly desired. Herein, a micelle‐assisted electrodeposition method is presented for the direct fabrication of porous Au film on Ni foam (pAu/NF). Benefiting from its interconnected porous architectonics, the pAu/NF exhibits superior NRR performance with a high NH₃ yield rate of 9.42 µg h^?1 cm^?2 and a superior Faradaic efficiency of 13.36% at ?0.2 V versus reversible hydrogen electrode under the neutral electrolyte (0.1 m Na₂SO₄). The proposed micelle‐assisted electrodeposition strategy is highly valuable for future design of active NRR catalysts with desired compositions toward various electrocatalysis fields.     

Cu?C(O) Interfaces Deliver Remarkable Selectivity and Stability for CO2 Reduction to C2+ Products at Industrial Current Density of 500 mA cm−2

The electrocatalytic CO₂ reduction reaction (CO₂RR) is an attractive technology for CO₂ valorization and high-density electrical energy storage. Achieving a high selectivity to C₂₊ products, especially ethylene, during CO₂RR at high current densities (>500 mA cm⁻²) is a prized goal of current research, though remains technically very challenging. Herein, it is demonstrated that the surface and interfacial structures of Cu catalysts, and the solid–gas–liquid interfaces on gas-diffusion electrode (GDE) in CO₂ reduction flow cells can be modulated to allow efficient CO₂RR to C₂₊ products. This approach uses the in situ electrochemical reduction of a CuO nanosheet/graphene oxide dots (CuO C(O)) hybrid. Owing to abundant Cu O C interfaces in the CuO C(O) hybrid, the CuO nanosheets are topologically and selectively transformed into metallic Cu nanosheets exposing Cu(100) facets, Cu(110) facets, Cu[n(100) × (110)] step sites, and Cu⁺/Cu⁰ interfaces during the electroreduction step,  the faradaic efficiencie (FE) to C₂₊ hydrocarbons was reached as high as 77.4% (FE_ethylene ≈ 60%) at 500 mA cm⁻² . In situ infrared spectroscopy and DFT simulations demonstrate that abundant Cu⁺ species and Cu⁰/Cu⁺ interfaces in the reduced CuO C(O) catalyst improve the adsorption and surface coverage of *CO on the Cu catalyst, thus facilitating C C coupling reactions.     

Highly Selective N2 Electroreduction to NH3 Using a Boron-Vacancy-Rich Diatomic Nb?B Catalyst

The ambient electrochemical N₂ reduction reaction (NRR) is a future approach for the artificial NH₃ synthesis to overcome the problems of high-energy consumption and environmental pollution by Haber–Bosch technology. However, the challenge of N₂ activation on a catalyst surface and the competitive hydrogen evolution reaction make the current NRR unsatisfied. Herein, this work demonstrates that NbB₂ nanoflakes (NFs) exhibit excellent selectivity and durability in NRR, which produces NH₃ with a production rate of 30.5 µg h⁻¹ mg_cat⁻¹ and a super-high Faraday efficiency (FE) of 40.2%. The high-selective NH₃ production is attributed to the large amount of active B vacancies on the surface of NbB₂ NFs. Density functional theory calculations suggest that the multiple atomic adsorption of N₂ on both unsaturated Nb and B atoms results in a significantly stretched N₂ molecule. The weakened NN triple bonds are easier to be broken for a biased NH₃ production. The diatomic catalysis is a future approach for NRR as it shows a special N₂ adsorption mode that can be well engineered.     

Au Sub‐Nanoclusters on TiO2 toward Highly Efficient and Selective Electrocatalyst for N2 Conversion to NH3 at Ambient Conditions

As the N?N bond in N₂ is one of the strongest bonds in chemistry, the fixation of N₂ to ammonia is a kinetically complex and energetically challenging reaction and, up to now, its synthesis is still heavily relying on energy and capital intensive Haber–Bosch process (150–350 atm, 350–550 °C), wherein the input of H₂ and energy are largely derived from fossil fuels and thus result in large amount of CO₂ emission. In this paper, it is demonstrated that by using Au sub‐nanoclusters (≈0.5 nm ) embedded on TiO₂ (Au loading is 1.542 wt%), the electrocatalytic N₂ reduction reaction (NRR) is indeed possible at ambient condition. Unexpectedly, NRR with very high and stable production yield (NH₃: 21.4 µg h^?1 mg^?1_cat., Faradaic efficiency: 8.11%) and good selectivity is achieved at ?0.2 V versus RHE, which is much higher than that of the best results for N₂ fixation under ambient conditions, and even comparable to the yield and activation energy under high temperatures and/or pressures. As isolated precious metal active centers dispersed onto oxide supports provide a well‐defined system, the special structure of atomic Au cluster would promote other important reactions besides NRR for water splitting, fuel cells, and other electrochemical devices.     

Confined Fe–Cu Clusters as Sub-Nanometer Reactors for Efficiently Regulating the Electrochemical Nitrogen Reduction Reaction

Electrochemical nitrogen reduction reaction (NRR) over nonprecious-metal and single-atom catalysts has received increasing attention as a sustainable strategy to synthesize ammonia. However, the atomic-scale regulation of such active sites for NRR catalysis remains challenging because of the large distance between them, which significantly weakens their cooperation. Herein, the utilization of regular surface cavities with unique microenvironment on graphitic carbon nitride as “subnano reactors” to precisely confine multiple Fe and Cu atoms for NRR electrocatalysis is reported. The synergy of Fe and Cu atoms in such confined subnano space provides significantly enhanced NRR performance, with nearly doubles ammonia yield and 54%-increased Faradic efficiency up to 34%, comparing with the single-metal counterparts. First principle simulation reveals this synergistic effect originates from the unique Fe–Cu coordination, which effectively modifies the N₂ absorption, improves electron transfer, and offers extra redox couples for NRR. This work thus provides new strategies of manipulating catalysts active centers at the sub-nanometer scale.     

Interfacially Engineered Nanoporous Cu/MnOx Hybrids for Highly Efficient Electrochemical Ammonia Synthesis via Nitrate Reduction

Electrochemical reduction of nitrate to ammonia (NH₃) not only offers a promising strategy for green NH₃ synthesis, but also addresses the environmental issues and balances the perturbed nitrogen cycle. However, current electrocatalytic nitrate reduction processes are still inefficient due to the lack of effective electrocatalysts. Here 3D nanoporous Cu/MnO_x hybrids are reported as efficient and durable electrocatalysts for nitrate reduction reaction, achieving the NH₃ yield rates of 5.53 and 29.3 mg h⁻¹ mg_cat.⁻¹ with 98.2% and 86.2% Faradic efficiency in 0.1 m Na₂SO₄ solution with 10 and 100 mm KNO₃, respectively, which are higher than those obtained for most of the reported catalysts under similar conditions. Both the experimental results and density functional theory calculations reveal that the interface effect between Cu/MnO_x interface could reduce the free energy of rate determining step and suppress the hydrogen evolution reaction, leading to the enhanced catalytic activity and selectivity. This work provides an approach to design advanced materials for NH₃ production via electrochemical nitrate reduction.     

Ammonia Electrosynthesis with a Stable Metal-Free 2D Silicon Phosphide Catalyst

Metal-free 2D phosphorus-based materials are emerging catalysts for ammonia (NH₃) production through a sustainable electrochemical nitrogen reduction reaction route under ambient conditions. However, their efficiency and stability remain challenging due to the surface oxidization. Herein, a stable phosphorus-based electrocatalyst, silicon phosphide (SiP), is explored. Density functional theory calculations certify that the N₂ activation can be realized on the zigzag Si sites with a dimeric end-on coordinated mode. Such sites also allow the subsequent protonation process via the alternating associative mechanism. As the proof-of-concept demonstration, both the crystalline and amorphous SiP nanosheets (denoted as C-SiP NSs and A-SiP NSs, respectively) are obtained through ultrasonic exfoliation processes, but only the crystalline one enables effective and stable electrocatalytic nitrogen reduction reaction, in terms of an NH₃ yield rate of 16.12 µg h⁻¹ mg_cat.⁻¹ and a Faradaic efficiency of 22.48% at −0.3 V versus reversible hydrogen electrode. The resistance to oxidization plays the decisive role in guaranteeing the NH₃ electrosynthesis activity for C-SiP NSs. This surface stability endows C-SiP NSs with the capability to serve as appealing electrocatalysts for nitrogen reduction reactions and other promising applications.     

Salt‐Templated Construction of Ultrathin Cobalt Doped Iron Thiophosphite Nanosheets toward Electrochemical Ammonia Synthesis

Exploiting efficient electrocatalysts for electrochemical nitrogen reduction (NRR) is highly desired and deeply meaningful for realizing sustainable ammonia (NH₃) production under ambient conditions. The Fe protein contains one [Fe₄S₄] cluster and P cluster, which play an important role for transfer electron during the nitrogen fixing of nitrogenases. Based on the understanding of nitrogenase, the rising‐star 2D iron thiophosphite (FePS₃) nanomaterials may be highly active electrocatalysts toward NRR due to the ideal elemental composition. In this work, 2D FePS₃ nanosheets are successfully synthesized by a facile salt‐templated method. The FePS₃ nanosheets show better electrocatalytic NH₃ yield and faradaic efficiency (FE) than Fe₂S₃, which demonstrates that the P element indeed improves the NRR activity of Fe‐S. Theoretically, Co incorporation not only effectively prompts the conductivity of FePS₃, but also enhances the catalytic activities of Fe‐edge sites. Experimentally, Co‐doped FePS₃ (Co‐FePS₃) nanosheets exhibit a remarkable electrocatalytic performance toward NRR, such as high NH₃ yield rate of 90.6 µg h^?1 mg_cat^?1, high FE of 3.38%, and an excellent long‐term stability. Being the first theoretical and experimental report regarding FePS₃‐based electrocatalyst toward NRR, this work represents an important beginning to the family of metal thiophosphite as advanced electrocatalysts toward NRR.     

Low‐Coordinate Step Atoms via Plasma‐Assisted Calcinations to Enhance Electrochemical Reduction of Nitrogen to Ammonia

The electrochemical N₂ reduction reaction (NRR) is emerging as a promising alternative to the industrial Haber–Bosch process for distributed and modular production of NH₃. Nevertheless, developing high‐efficiency catalysts to simultaneously realize both high activity and selectivity for the development of a sustainable NRR is very critical but extremely challenging. Here, a unique plasma‐assisted strategy is developed to synthesize iridium diphosphide nanocrystals with abundant surface step atoms anchored in P,N‐codoped porous carbon nanofilms (IrP₂@PNPC‐NF), where the edges of the IrP₂ nanocrystals are extremely irregular, and the ultrathin PNPC‐NF possesses a honeycomb‐like macroporous structure. These characteristics ensure that IrP₂@PNPC‐NF delivers superior NRR performance with an NH₃ yield rate of 94.0 µg h^?1 mg^?1_cat. and a faradaic efficiency (FE) of 17.8%. Density functional theory calculations reveal that the unique NRR performance originates from the low‐coordinate step atoms on the edges of IrP₂ nanocrystals, which can lower the reaction barrier to improve the NRR activity and simultaneously inhibit hydrogen evolution to achieve a high FE for NH₃ formation. More importantly, such a plasma‐assisted strategy is general and can be extended to the synthesis of other high‐melting‐point noble‐metal phosphides (OsP₂@PNPC‐NF, Re₃P₄@PNPC‐NF, etc.) with abundant step atoms at lower temperatures.     

Electrocatalytic N2 reduction to NH3 with high Faradaic efficiency enabled by vanadium phosphide nanoparticle on V foil

To develop highly efficient electrochemical catalysts for N₂ fixation is important to sustainable ambient NH₃ production through the N₂ reduction reaction (NRR). Herein, we demonstrate the development of vanadium phosphide nanoparticle on V foil as a high-efficiency and stable catalyst for ambient NH₃ production with excellent selectivity. The high Faradaic efficiency of 22% with a large NH₃ yield of 8.35 × 10⁻¹¹ mol·s⁻¹·cm⁻² was obtained at 0 V vs. the reversible hydrogen electrode in acid solution, superior to all previously studied V-based NRR catalysts. Density functional theory calculations are also utilized to have an insight into the catalytic mechanism.

     

A Robust n-n Heterojunction: Cu?N and B?N Boosting for Ambient Electrocatalytic Nitrogen Reduction to Ammonia

An n-n type heterojunction comprising with Cu N and B N dual active sites is synthesized via in situ growth of a conductive metal–organic framework (MOF) [Cu₃(HITP)₂] (HITP = 2,3,6,7,10,11-hexaiminotriphenylene) on hexagonal boron nitride (h-BN) nanosheets (hereafter denoted as Cu₃(HITP)₂@h-BN) for the electrocatalytic nitrogen reduction reaction (eNRR). The optimized Cu₃(HITP)₂@h-BN shows the outstanding eNRR performance with the NH₃ production of 146.2 µg h⁻¹ mg_cat⁻¹ and the Faraday efficiency of 42.5% due to high porosity, abundant oxygen vacancies, and Cu N/B N dual active sites. The construction of the n-n heterojunction efficiently modulates the state density of active metal sites toward the Fermi level, facilitating the charge transfer at the interface between the catalyst and reactant intermediates. Additionally, the pathway of NH₃ production catalyzed by the Cu₃(HITP)₂@h-BN heterojunction is illustrated by in situ FT-IR spectroscopy and density functional theory calculation. This work presents an alternative approach to design advanced electrocatalysts based on conductive MOFs.     

Accelerating Industrial-Level NO3− Electroreduction to Ammonia on Cu Grain Boundary Sites via Heteroatom Doping Strategy

Although the electrocatalytic nitrate reduction reaction (NO₃⁻RR) is an attractive NH₃ synthesis route, it suffers from low yield due to the lack of efficient catalysts. Here, this work reports a novel grain boundary (GB)-rich Sn-Cu catalyst, derived from in situ electroreduction of Sn-doped CuO nanoflower, for effectively electrochemical converting NO₃⁻ to NH₃. The optimized Sn_1%-Cu electrode achieves a high NH₃ yield rate of 1.98 mmol h⁻¹ cm⁻² with an industrial-level current density of −425 mA cm⁻² at −0.55 V versus a reversible hydrogen electrode (RHE) and a maximum Faradaic efficiency of 98.2% at −0.51 V versus RHE, outperforming the pure Cu electrode. In situ Raman and attenuated total reflection Fourier transform infrared spectroscopies reveal the reaction pathway of NO₃⁻RR to NH₃ by monitoring the adsorption property of reaction intermediates. Density functional theory calculations clarify that the high-density GB active sites and the competitive hydrogen evolution reaction (HER) suppression induced by Sn doping synergistically promote highly active and selective NH₃ synthesis from NO₃⁻RR. This work paves an avenue for efficient NH₃ synthesis over Cu catalyst by in situ reconstruction of GB sites with heteroatom doping.     

Oxygen vacancy engineering of calcium cobaltate: A nitrogen fixation electrocatalyst at ambient condition in neutral electrolyte

In order to sustainably transform N2 to ammonia(NRR)using electrocatalysts under mild ambient condition,it is urgent to design and develop non-nobel metal nanocatalysts that are inexpensive and suitable for mass-production.Herein,a calcium metalate catalyst CaCoO_xwith oxygen vacancies was synthesized and used as an electrocatalyst for NRR for the first time,whose morphology can be controlled by the calcination temperature and the heating rate.Under the optimal conditions,the CaCoO_xcatalyst achieved the yield of nitrogen conversion to ammonia of 16.25μg·h^-1·mg_cat.^-1at the potential of-0.3 V relative to the reversible hydrogen electrode(RHE)with a Faraday efficiency of 20.51%.The electrocatalyst showed good stability even after 12 times recyclability under environmental conditions and neutral electrolyte.Later,the electrocatalytic nitrogen reduction performance of CaFeO_x,CaNiO_x,CaCuO_xwas investigated.These earth-rich transition metals also exhibited certain NRR electrocatalytic capabilities,which provided a door for further development of inexpensive and easily available transition metal as nitrogen reduction electrocatalysts.