High-resolution structure of a polyomavirus VP1-oligosaccharide complex: implications for assembly and receptor binding

The crystal structure of a recombinant polyomavirus VP1 pentamer (residues 32-320) in complex with a branched disialylated hexasaccharide receptor fragment has been determined at 1.9 A resolution. The result extends our understanding of oligosaccharide receptor recognition. It also suggests a mechanism for enhancing the fidelity of virus assembly. We have previously described the structure of the complete polyomavirus particle complexed with this receptor fragment at 3.65 A. The model presented here offers a much more refined view of the interactions that determine carbohydrate recognition and allows us to assign additional specific contacts, in particular those involving the (alpha2,6)-linked, branching sialic acid. The structure of the unliganded VP1 pentamer, determined independently, shows that the oligosaccharide fits into a preformed groove and induces no measurable structural rearrangements. A comparison with assembled VP1 in the virus capsid reveals a rearrangement of residues 32-45 at the base of the pentamer. This segment may help prevent the formation of incorrectly assembled particles by reducing the likelihood that the C-terminal arm will fold back into its pentamer of origin.     

Assaying for structural variation in the parvovirus capsid and its role in infection

The capsid of canine parvovirus (CPV) was assayed for susceptibility to proteases and for structural variation. The natural cleavage of VP2 to VP3 in CPV full (DNA containing) particles recovered from tissue culture occurred within the sequence Arg-Asn-Glu-Arg Ala-Thr. Trypsin, chymotrypsin, bromelain, and cathepsin B all cleaved >90% of the VP2 to VP3 in full but not in empty capsids and did not digest the capsid further. Digestion with proteinase K, Pronase, papain, or subtilisin cleaved the VP2 to VP3 and also cleaved at additional internal sites, causing particle disintegration and protein degradation. Several partial digestion products produced by proteinase K or subtilisin were approximately 31-32.5 kDa, indicating cleavage within loop 3 of the capsid protein as well as other sites. Protease treatment of capsids at pH 5.5 or 7.5 did not significantly alter their susceptibility to digestion. The isoelectric point of CPV empty capsids was pH 5.3, and full capsids were 0.3 pH more acidic, but after proteolysis of VP2 to VP3, the pI of the full capsids became the same as that of the empty capsids. Antibodies against various capsid protein sequences showed the amino termini of most VP2 molecules were on the outside of full but not empty particles, that the VP1-unique sequence was internal, and that the capsid could be disintegrated by heat or urea treatment to expose the internal sequences. Capsids added to cells were localized within the cell cytoplasm in vesicles that appeared to be lysosomes. Microinjected capsids remained primarily in the cytoplasm, although a small proportion was observed to be in the nucleus after 2 h. After CPV capsids labeled with [35S]methionine were bound to cells at 0 degrees C and the cells warmed, little cleavage of VP1 or VP2 was observed even after prolonged incubation. Inoculation of cells with virus in the presence of proteinase inhibitors did not significantly reduce the infection.     

Intrinsic signals for the assembly of hepatitis A virus particles. Role of structural proteins VP4 and 2A

Capsid assembly is the final event of virus replication, and its understanding is pivotal for the design of empty capsid-based recombinant vaccines and drug delivery systems. Although the capsid structure of several members of the picornavirus family has been elucidated, little is known about the structural elements governing the assembly process that is tightly associated with proteolytic processing of the viral polyprotein. Among the picornaviruses, hepatitis A virus (HAV) is unique in that it contains VP1-2A as a structural component and the small structural protein VP4, which argues for an assembly pathway different from that proposed for other picornaviruses. Using a recombinant system we show here that proteolytic processing of the HAV capsid proteins' precursor P1-2A is independent of the terminal domains 2A and VP4 of the substrate. However, both terminal domains play distinct roles in the assembly of viral particles. 2A as part of P1-2A is a primary signal for the assembly of pentameric structures which only further aggregate to empty viral capsids when VP4 is present as the N terminus of the precursor. Particle formation in the hepatovirus genus is thus regulated by two intrinsic signals that are distinct from those described for other picornaviruses.     

Hexon-only binding of VP26 reflects differences between the hexon and penton conformations of VP5, the major capsid protein of herpes simplex virus

VP26 is a 12-kDa capsid protein of herpes simplex virus 1. Although VP26 is dispensable for assembly, the native capsid (a T=16 icosahedron) contains 900 copies: six on each of the 150 hexons of VP5 (149 kDa) but none on the 12 VP5 pentons at its vertices. We have investigated this interaction by expressing VP26 in Escherichia coli and studying the properties of the purified protein in solution and its binding to capsids. Circular dichroism spectroscopy reveals that the conformation of purified VP26 consists mainly of beta-sheets (approximately 80%), with a small alpha-helical component (approximately 15%). Its state of association was determined by analytical ultracentrifugation to be a reversible monomer-dimer equilibrium, with a dissociation constant of approximately 2 x 10(-5) M. Bacterially expressed VP26 binds to capsids in the normal amount, as determined by quantitative sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Cryoelectron microscopy shows that the protein occupies its usual sites on hexons but does not bind to pentons, even when available in 100-fold molar excess. Quasi-equivalence requires that penton VP5 must differ in conformation from hexon VP5: our data show that in mature capsids, this difference is sufficiently pronounced to abrogate its ability to bind VP26.     

Molecular mechanisms of poliovirus persistence: key role of capsid determinants during the establishment phase

As viral persistence is of major medical importance, well-characterized, simple models are needed to improve our understanding of persistent infections. We have chosen to study the molecular mechanisms of viral persistence with the poliovirus (PV), because this picornavirus is one of the best characterized animal viruses, it infects the central nervous system which is a target organ for viral persistence, and it belongs to the Picornaviridae family of viruses, which includes several naturally persisting viruses. We have developed models of PV persistence in neuronal and epidermoid cells, and the present review will focus on the latter one because both lytic and persistent PV strains can be used to study the PV-HEp-2 cell interactions. The viral determinants of persistence have been investigated with this model, and PV determinants have proven to be of crucial importance for the establishment of persistence in HEp-2 cells. Precise determinants of PV persistence have been identified for PV serotypes 1 and 3, in capsid proteins VP1 and VP2. These determinants modify the early steps of the PV cycle, and in particular, the conformational modifications of the capsid following virus adsorption onto its receptor. These results permit us to propose several hypotheses concerning PV persistence and the early steps of the PV cycle.     

Incorporation of the green fluorescent protein into the herpes simplex virus type 1 capsid

The herpes simplex virus type 1 (HSV-1) UL35 open reading frame (ORF) encodes a 12-kDa capsid protein designated VP26. VP26 is located on the outer surface of the capsid specifically on the tips of the hexons that constitute the capsid shell. The bioluminescent jellyfish (Aequorea victoria) green fluorescent protein (GFP) was fused in frame with the UL35 ORF to generate a VP26-GFP fusion protein. This fusion protein was fluorescent and localized to distinct regions within the nuclei of transfected cells following infection with wild-type virus. The VP26-GFP marker was introduced into the HSV-1 (KOS) genome resulting in recombinant plaques that were fluorescent. A virus, designated K26GFP, was isolated and purified and was shown to grow as well as the wild-type virus in cell culture. An analysis of the intranuclear capsids formed in K26GFP-infected cells revealed that the fusion protein was incorporated into A, B, and C capsids. Furthermore, the fusion protein incorporated into the virion particle was fluorescent as judged by fluorescence-activated cell sorter (FACS) analysis of infected cells in the absence of de novo protein synthesis. Cells infected with K26GFP exhibited a punctate nuclear fluorescence at early times in the replication cycle. At later times during infection a generalized cytoplasmic and nuclear fluorescence, including fluorescence at the cell membranes, was observed, confirming visually that the fusion protein was incorporated into intranuclear capsids and mature virions.     

Molecular characterization of mouse-virulent poliovirus type 1 Mahoney mutants: involvement of residues of polypeptides VP1 and VP2 located on the inner surface of the capsid protein shell

Most poliovirus (PV) strains, including PV PV-1/Mahoney, are unable to cause paralysis in mice. Determinants for restriction of PV-1/Mahoney in mice have been identified by manipulating PV-1 cDNA and located on the viral capsid protein VP1. These determinants consist of a highly exposed amino acid sequence on the capsid surface corresponding to the B-C loop (M. Murray, J. Bradley, X. Yang, E. Wimmer, E. Moss, and V. Racaniello, Science 241:213-215, 1988; A. Martin, C. Wychowski, T. Couderc, R. Crainic, J. Hogle, and M. Girard, EMBO J. 7:2839-2847, 1988) and of residues belonging to the N-terminal sequence located on the inner surface of the protein shell (E. Moss and V. Racaniello, EMBO J. 10:1067-1074, 1991). Using an in vivo approach, we isolated two mouse-neurovirulent PV-1 mutants in the mouse central nervous system after a single passage of PV-1/Mahoney inoculated by the intracerebral route. Both mutants were subjected to two additional passages in mice, plaque purified, and subsequently characterized. The two cloned mutants, Mah-NK13 and Mah-NL32, retained phenotypic characteristics of the parental PV-1/Mahoney, including epitope map, heat lability, and temperature sensitivity. Mah-NK13 exhibited slightly smaller plaques than did the parental virus. The nucleotide sequences of the mutant genomes were determined, and mutations were identified. Mutations were independently introduced into the parental PV-1/Mahoney genome by single-site mutagenesis. Mutated PV-1/Mahoney viruses were then tested for their neurovirulence in mice. A single amino acid substitution in the capsid proteins VP1 (Thr-22-->Ile) and VP2 (Ser-31-->Thr) identified in the Mah-NK13 and Mah-NL32 genomes, respectively, conferred the mouse-virulent phenotype to the mouse-avirulent PV-1/Mahoney. Ile-22 in VP1 was responsible for the small-plaque phenotype of Mah-NK13. Both mutations arose during the first passage in the mouse central nervous system. We thus identified a new mouse adaptation determinant on capsid protein VP1, and we showed that at least one other capsid protein, VP2, could also express a mouse adaptation determinant. Both determinants are located in the inside of the three-dimensional structure of the viral capsid. They may be involved in the early steps of mouse nerve cell infection subsequent to receptor attachment.     

Structure of poliovirus type 2 Lansing complexed with antiviral agent SCH48973: comparison of the structural and biological properties of three poliovirus serotypes

BACKGROUND: Polioviruses are human pathogens and the causative agents of poliomyelitis. Polioviruses are icosahedral single-stranded RNA viruses, which belong to the picornavirus family, and occur as three distinct serotypes. All three serotypes of poliovirus can infect primates, but only type 2 can infect mice. The crystal structures of a type 1 and a type 3 poliovirus are already known. Structural studies of poliovirus type 2 Lansing (PV2L) were initiated to try to enhance our understanding of the differences in host range specificity, antigenicity and receptor binding among the three serotypes of poliovirus. RESULTS: The crystal structure of the mouse neurovirulent PV2L complexed with a potent antiviral agent, SCH48973, was determined at 2.9 A resolution. Structural differences among the three poliovirus serotypes occur primarily in the loop regions of the viral coat proteins (VPs), most notably in the loops of VP1 that cluster near the fivefold axes of the capsid, where the BC loop of PV2L is disordered. Unlike other known structures of enteroviruses, the entire polypeptide chain of PV2L VP4 is visible in the electron density and RNA bases are observed stacking with conserved aromatic residues (Tyr4020 and Phe4046) of VP4. The broad-spectrum antiviral agent SCH48973 is observed binding in a pocket within the beta-barrel of VP1, in approximately the same location that natural 'pocket factors' bind to polioviruses. SCH48973 forms predominantly hydrophobic interactions with the pocket residues. CONCLUSIONS: Some of the conformational changes required for infectivity and involved in the control of capsid stability and neurovirulence in mice may occur in the vicinity of the fivefold axis of the poliovirus, where there are significant structural differences among the three poliovirus serotypes in the surface exposed loops of VP1 (BC, DE, and HI). A surface depression is located at the fivefold axis of PV2L that is not present in the other two poliovirus serotypes. The observed interaction of RNA with VP4 supports the observation that loss of VP4 ultimately leads to the loss of viral RNA. A model is proposed that suggests dual involvement of the virion fivefold and pseudo-threefold axes in receptor-mediated initiation of infection by picornaviruses.     

Role of individual T-cell epitopes of Theiler's virus in the pathogenesis of demyelination correlates with the ability to induce a Th1 response

Intracerebral inoculation of susceptible strains of mice with Theiler's murine encephalomyelitis virus (TMEV) results in immune-mediated demyelination. Three major T-cell epitopes have previously been identified within the VP1 (VP1233-250), VP2 (VP274-86), and VP3 (VP324-37) capsid proteins in virus-infected SJL/J mice. These epitopes appear to account for the majority ( approximately 90%) of major histocompatibility complex class II-restricted T-cell responses to TMEV. Interestingly, the effect of immunization with synthetic peptides bearing the predominant T-cell epitopes on the course of TMEV-induced demyelination indicates that T cells reactive to the VP1 and VP2 epitopes, but not VP3, accelerate the pathogenesis of demyelination. The predominant pathogenic role of the T cells is verified by similar immunization with the fusion proteins containing the entire individual capsid proteins. The order of appearance and level of T cells specific for the individual epitopes during the course of demyelination are similar to each other. However, cytokine profiles of T cells from virus-infected mice indicate that T cells specific for the VP1 (and perhaps the VP2) epitope are Th1, whereas T cells reactive to VP3 are primarily Th2. These results suggest that Th1-type cells specific for VP1 and VP2 are involved in the pathogenesis of viral demyelination induced by TMEV. Thus, a predominance of Th1-inducing viral epitopes is likely critical for the pathogenesis of demyelination.     

Association with capsid proteins promotes nuclear targeting of simian virus 40 DNA

All animal DNA viruses except pox virus utilize the cell nucleus as the site for virus reproduction. Yet, a critical viral infection process, nuclear targeting of the viral genome, is poorly understood. The role of capsid proteins in nuclear targeting of simian virus 40 (SV40) DNA, which is assessed by the nuclear accumulation of large tumor (T) antigen, the initial sign of the infectious process, was tested by two independent approaches: antibody interception experiments and reconstitution experiments. When antibody against viral capsid protein Vp1 or Vp3 was introduced into the cytoplasm, the nuclear accumulation of T antigen was not observed in cells either infected or cytoplasmically injected with virion. Nuclearly introduced anti-Vp3 IgG also showed the inhibitory effect. In the reconstitution experiments, SV40 DNA was allowed to interact with protein components of the virus, either empty particles or histones, and the resulting complexes were tested for the capability of protein components to target the DNA to the nucleus from cytoplasm as effectively as the targeting of DNA in the mature virion. In cells injected with empty particle-DNA, but not in minichromosome-injected cells, T antigen was observed as effectively as in SV40-injected cells. These results demonstrate that SV40 capsid proteins can facilitate transport of SV40 DNA into the nucleus and indicate that Vp3, one of the capsid proteins, accompanies SV40 DNA as it enters the nucleus during virus infection.     

The crystal structure of bluetongue virus VP7

Bluetongue virus (BTV), a representative of the orbivirus genus of the Reoviridae, is considerably larger (at 80 nm across), and structurally more complex, than any virus for which we have comprehensive structural information. Orbiviruses infect mammalian hosts through insect vectors and cause economically important diseases of domesticated animals. They possess a segmented double-stranded RNA genome within a capsid composed of four major types of polypeptide chains. An outer layer of VP2 and VP5 is removed as the virus enters the target cell, to leave an intact core within the cell. This core is 70 nm across and composed of 780 copies of VP7 (M(r) 38K) that, as trimers, form 260 'bristly' capsomeres clothing an inner scaffold constructed from VP3 (M(r) 103K). We report here the crystal structure of VP7 from BTV serotype 10, which reveals a molecular architecture not seen previously in viral structural proteins. Each subunit consists of two domains, one a beta-sandwich, the other a bundle of alpha-helices, and a short carboxy-terminal arm which might tie trimers together during capsid formation. A concentration of methionine residues at the core of the molecule could provide plasticity, relieving structural mismatches during assembly.     

Productive penetration of rotavirus in cultured cells induces coentry of the translation inhibitor alpha-sarcin

Internalization of rotavirus in MA104 cells was found to induce coentry of alpha-sarcin, a toxin that inhibits translation in cell-free systems and to which cells are normally impermeable. Entry of the toxin, measured by inhibition of protein synthesis at early times after infection, correlated with virus penetration leading to expression of infectivity, since toxin entry (1) was induced only by trypsin-treated triple-layered virions, to a degree dependent on the toxin and the virus concentration; (2) correlated with the degree of permissivity of different cell lines to rotavirus infection; (3) was inhibited to a similar extent as infectivity by treatment of cells with neuraminidase; and (4) was inhibited by pre- or postadsorption incubation of the virus with neutralizing monoclonal antibodies to VP7 and VP4 (VP8*). Neither the virus infectivity nor the toxin coentry was significantly affected by treatment of cells with bafilomycin A1, an inhibitor of the vacuolar proton ATPase, indicating that both events are independent of the endosomal acid pH. Virus-like particles (VLP), composed of rotavirus proteins 2/6/7/4, but not 2/6/7 or 2/6, were able to induce toxin entry as efficiently as virions. Use of genetically modified VLP in combination with the toxin coentry assay, which measures entry through a productive pathway, should allow identification of the regions of the outer capsid proteins essential for rotavirus penetration.     

Transinhibition of herpes simplex virus replication by an inducible cell-resident gene encoding a dysfunctional VP19c capsid protein

This study demonstrates that cells expressing a dysfunctional analog of a herpes simplex virus (HSV) capsid protein inhibits HSV replication. Vero cell lines expressing HSV-1 capsid protein VP19c/beta-galactosidase fusion proteins were constructed and tested for their kinetics of expression, intracellular location, and ability to interfere with HSV replication. Two chimeric genes were constructed for these studies. The larger chimeric gene encodes the amino terminal 327 amino acids (aa) of VP19c fused to the carboxy terminal 1026 aa of beta-galactosidase, and the shorter chimeric gene encodes VP19c aa 1-30 and 302-327 fused to the carboxy-terminal 1026 aa of beta-galactosidase. Cell lines V32G-1 and V32G-2 containing the larger and the shorter chimeric genes, respectively, were isolated after cotransfection with plasmid pSV2-neo DNA, cell selection, and limiting-dilution cloning. The chimeric VP19c/beta-galactosidase genes resident in V32G-1 and V32G-2 cell lines were induced by early gene products of superinfecting wild-type HSV-1 and HSV-2, but were not constitutively expressed. The hybrid proteins expressed in infected V32G-1 and V32G-2 cells both colocalized with infected cell protein 8 (ICP8) into virus-replicative compartments in the cell nuclei. HSV-1 and HSV-2 growth in V32G-1 cells (which express the larger chimeric gene) was significantly reduced compared to growth in V32G-2 and control Vero cells. The data suggest that the larger VP19c/beta-galactosidase hybrid protein interferes with virus capsid assembly or morphogenesis in a competitive manner. Results also demonstrate that a small portion of VP19c containing the predicted endoplasmic reticulum signal sequence for this capsid protein (aa 1-30) promotes incorporation of the VP19c/beta-galactosidase fusion proteins into nuclear viral replication compartments.     

Canine parvovirus host range is determined by the specific conformation of an additional region of the capsid

We analyzed a region of the capsid of canine parvovirus (CPV) which determines the ability of the virus to infect canine cells. This region is distinct from those previously shown to determine the canine host range differences between CPV and feline panleukopenia virus. It lies on a ridge of the threefold spike of the capsid and is comprised of five interacting loops from three capsid protein monomers. We analyzed 12 mutants of CPV which contained amino acid changes in two adjacent loops exposed on the surface of this region. Nine mutants infected and grew in feline cells but were restricted in replication in one or the other of two canine cell lines tested. Three other mutants whose genomes contain mutations which affect one probable interchain bond were nonviable and could not be propagated in either canine or feline cells, although the VP1 and VP2 proteins from those mutants produced empty capsids when expressed from a plasmid vector. Although wild-type and mutant capsids bound to canine and feline cells in similar amounts, infection or viral DNA replication was greatly reduced after inoculation of canine cells with most of the mutants. The viral genomes of two host range-restricted mutants and two nonviable mutants replicated to wild-type levels in both feline and canine cells upon transfection with plasmid clones. The capsids of wild-type CPV and two mutants were similar in susceptibility to heat inactivation, but one of those mutants and one other were more stable against urea denaturation. Most mutations in this structural region altered the ability of monoclonal antibodies to recognize epitopes within a major neutralizing antigenic site, and that site could be subdivided into a number of distinct epitopes. These results argue that a specific structure of this region is required for CPV to retain its canine host range.     

Antiviral agent blocks breathing of the common cold virus

A dynamic capsid is critical to the events that shape the viral life cycle; events such as cell attachment, cell entry, and nucleic acid release demand a highly mobile viral surface. Protein mass mapping of the common cold virus, human rhinovirus 14 (HRV14), revealed both viral structural dynamics and the inhibition of such dynamics with an antiviral agent, WIN 52084. Viral capsid digestion fragments resulting from proteolytic time-course experiments provided structural information in good agreement with the HRV14 three-dimensional crystal structure. As expected, initial digestion fragments included peptides from the capsid protein VP1. This observation was expected because VP1 is the most external viral protein. Initial digestion fragments also included peptides belonging to VP4, the most internal capsid protein. The mass spectral results together with x-ray crystallography data provide information consistent with a "breathing" model of the viral capsid. Whereas the crystal structure of HRV14 shows VP4 to be the most internal capsid protein, mass spectral results show VP4 fragments to be among the first digestion fragments observed. Taken together this information demonstrates that VP4 is transiently exposed to the viral surface via viral breathing. Comparative digests of HRV14 in the presence and absence of WIN 52084 revealed a dramatic inhibition of digestion. These results indicate that the binding of the antiviral agent not only causes local conformational changes in the drug binding pocket but actually stabilizes the entire viral capsid against enzymatic degradation. Viral capsid mass mapping provides a fast and sensitive method for probing viral structural dynamics as well as providing a means for investigating antiviral drug efficacy.     

Phage display of intact domains at high copy number: a system based on SOC, the small outer capsid protein of bacteriophage T4

Peptides fused to the coat proteins of filamentous phages have found widespread applications in antigen display, the construction of antibody libraries, and biopanning. However, such systems are limited in terms of the size and number of the peptides that may be incorporated without compromising the fusion proteins' capacity to self-assemble. We describe here a system in which the molecules to be displayed are bound to pre-assembled polymers. The polymers are T4 capsids and polyheads (tubular capsid variants) and the display molecules are derivatives of the dispensable capsid protein SOC. In one implementation, SOC and its fusion derivatives are expressed at high levels in Escherichia coli, purified in high yield, and then bound in vitro to separately isolated polyheads. In the other, a positive selection vector forces integration of the modified soc gene into a soc-deleted T4 genome, leading to in vivo binding of the display protein to progeny virions. The system is demonstrated as applied to C-terminal fusions to SOC of (1) a tetrapeptide; (2) the 43-residue V3 loop domain of gp120, the human immunodeficiency virus type-1 (HIV-1) envelope glycoprotein; and (3) poliovirus VP1 capsid protein (312 residues). SOC-V3 displaying phage were highly antigenic in mice and produced antibodies reactive with native gp120. That the fusion protein binds correctly to the surface lattice was attested in averaged electron micrographs of polyheads. The SOC display system is capable of presenting up to approximately 10(3) copies per capsid and > 10(4) copies per polyhead of V3-sized domains. Phage displaying SOC-VP1 were isolated from a 1:10(6) mixture by two cycles of a simple biopanning procedure, indicating that proteins of at least 35 kDa may be accommodated.     

Entry of alphaherpesviruses mediated by poliovirus receptor-related protein 1 and poliovirus receptor

A human member of the immunoglobulin superfamily was shown to mediate entry of several alphaherpesviruses, including herpes simplex viruses (HSV) 1 and 2, porcine pseudorabies virus (PRV), and bovine herpesvirus 1 (BHV-1). This membrane glycoprotein is poliovirus receptor-related protein 1 (Prr1), designated here as HveC. Incubation of HSV-1 with a secreted form of HveC inhibited subsequent infection of a variety of cell lines, suggesting that HveC interacts directly with the virus. Poliovirus receptor (Pvr) itself mediated entry of PRV and BHV-1 but not of the HSV strains tested. HveC was expressed in human cells of epithelial and neuronal origin; it is the prime candidate for the coreceptor that allows both HSV-1 and HSV-2 to infect epithelial cells on mucosal surfaces and spread to cells of the nervous system.     

The herpes simplex virus triplex protein, VP23, exists as a molten globule

Two proteins, VP19C (50,260 Da) and VP23 (34,268 Da), make up the triplexes which connect adjacent hexons and pentons in the herpes simplex virus type 1 capsid. VP23 was expressed in Escherichia coli and purified to homogeneity by Ni-agarose affinity chromatography. In vitro capsid assembly experiments demonstrated that the purified protein was functionally active. Its physical status was examined by differential scanning calorimetry, ultracentrifugation, size exclusion chromatography, circular dichroism, fluorescence spectroscopy, and 8-anilino-1-naphthalene sulfonate binding studies. These studies established that the bacterially expressed VP23 exhibits properties consistent with its being in a partially folded, molten globule state. We propose that the molten globule represents a functionally relevant intermediate which is necessary to allow VP23 to undergo interaction with VP19C in the process of capsid assembly.     

Characterization of the ion channels formed by poliovirus in planar lipid membranes

The steps in poliovirus infection leading to viral entry and uncoating are not well understood. Current evidence suggests that the virus first binds to a plasma membrane-bound receptor present in viable cells, leading to a conformational rearrangement of the viral proteins such that the virus crosses the membrane and releases the genomic RNA. The studies described in this report were undertaken to determine if poliovirus (160S) as well as one of the subviral particles (135S) could interact with membranes lacking poliovirus receptors in an effort to begin to understand the process of uncoating of the virus. We report that both forms of viral particles, 160S and 135S, interact with lipid membranes and induce the formation of ion-permeable channels in a manner that does not require acid pH. The channels induced by the viral particles 160S have a voltage-dependent conductance which depends on the ionic composition of the medium. Our findings raise the possibility that viral entry into cells may be mediated by direct interaction of viral surface proteins with membrane lipids.