Grafting polymer from poly(ethylene terephthalate) films by surface‐initiated ATRP

Surface‐initiated atom transfer radical polymerization (ATRP) from poly(ethylene terephthalate) (PET) film was studied. Poly(methyl methacrylate) (PMMA), poly (acrylamide) (PAAM), and their diblock copolymer (PMMA/PAAM) on the surface of PET film were successfully prepared by surface‐initiated ATRP. The structures and properties of the modified PET film were characterized by FT‐IR/ATR, X‐ray photoelectron spectroscopy (XPS), measurements of contact angles, and scanning electronic microscopy (SEM). The results indicate that the surface properties of PET film were greatly improved by grafted polymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymers prepared by atom transfer radical polymerization (ATRP) from cellulose

A cellulose-based macro-initiator, cellulose 2-bromoisobutyrylate, for atom transfer radical polymerization (ATRP) was successfully synthesized by direct homogeneous acylation of cellulose in a room temperature ionic liquid, 1-allyl-3-methylimidazolium chloride, without using any catalysts and protecting group chemistry. ATRP of methyl methacrylate and styrene from the macro-initiator was then carried out. The synthesized cellulose graft copolymers were characterized by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The grafted PMMA and PS chains were obtained by the hydrolysis of the cellulose backbone and analyzed by GPC. The results obtained from these analytical techniques confirm that the graft polymerization occurred from the cellulose backbone and the obtained copolymers had grafted polymer chains with well-controlled molecular weight and polydispersity. Through static and dynamic laser light scattering and TEM measurements, it was found that the cellulose graft copolymer in solution could aggregate and self-assembly into sphere-like polymeric structure.     

Radiation-induced graft copolymerization of mixtures of styrene and n-butyl acrylate onto cellulose and cellulose triacetate

Mixtures of styrene and n-butyl acrylate of various compositions were grafted onto cellulose and cellulose triacetate fibers preirradiated with γ-rays at 0°C in air. Monomer reactivity ratios of the grafted copolymers were found to be different from those of the nongrafted copolymers or those of AIBN-initiated copolymers. The active species initiating the graft copolymerization were trapped radicals for cellulose and peroxides for cellulose triacetate. Kinetic investigations of the graft copolymerization of styrene onto preirradiated cellulose triacetate fibers were also carried out, and it was found that the kinetic scheme for radical polymerization is also applicable to graft copolymerization in a heterogeneous system.     

Preparation,characterization, and properties of cellulose–polyacrylamide graft copolymers

Graft copolymers of acrylamide on cellulose materials (α‐cellulose 55.8%, DP 287.3) obtained from Terminalia superba wood meal and its carboxymethylated derivative (DS 0.438) were prepared using a ceric ion initiator and batch polymerization and modified batch polymerization processes. The extent of graft polymer formation was measured in graft level, grafting efficiency, molecular weight of grafted polymer chains, frequency of grafting as a function of the polymerization medium, and initiator and monomer concentrations. It was found that the modified batch polymerization process yielded greater graft polymer formation and that graft copolymerization in aqueous alcohol medium resulted in enhanced levels of grafting and formation of many short grafted polymer chains. Viscosity measurements in aqueous solutions of carboxymethyl cellulose‐g‐polyacrylamide copolymer samples showed that interpositioning of polyacrylamide chains markedly increased the specific viscosity and resistance to biodegradation of the graft copolymers. The flocculation characteristics of the graft copolymers were determined with kaolin suspension. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 913–923, 2003     

Surface‐initiated atom transfer radical polymerization (ATRP) of styrene from silica nanoparticles under UV irradiation

Diethyldithiocarbamyl‐modified silica nanoparticles were prepared and used as macroinitiator for the surface‐initiated atom transfer radical polymerization (SI‐ATRP) of styrene under UV irradiation. Well‐defined polymer chains were grown from the nanoparticle surfaces to yield particles composed of a silica core and a well‐defined, densely grafted outer PS layer with a mass ratio of styrene to silica, or percentage grafting, of 276.3% after an UV irradiation time of 5 h. Copyright © 2004 Society of Chemical Industry     

Modification of hydrophilic cellulose fibers by monolayer growth of polystyrene chains using ATRP

The chemical modification of biopolymer-based materials by grafting synthetic polymers has received considerable attention in recent years, inasmuch as there are wide varieties of monomers available. Nowadays, the most abundant biomacromolecule, cellulose, has attracted considerable attention due to its biodegradable, biocompatible, and renewable characteristics. In this study, the surface of hydrophilic cellulose microfibers was successfully modified by polymerization of hydrophobic polystyrene using atom transfer radical polymerization (ATRP) technique in dispersion medium. In this medium, only the outer surface of the macroinitiator is available for the polymerization, so the grown polymer chains are formed as monolayer on the surface of the macroinitiator. This type of modification not only increases the mechanical properties of the cellulose backbone, but also turns the hydrophilic characteristics of cellulose into hydrophobic state. For this purpose, in the first part of this research, chloroacetylated cellulose was synthesized as macroinitiator. In the second part, the acyl content of the macroinitiator and the degree of substitution, which show the efficiency of the esterification reaction, have been determined by basic hydrolysis of the macroinitiator with KOH and back-titration of the excess alkali with HCl. Finally, the chloroacetylated cellulose was modified by graft copolymerization of styrene using ATRP method. The polystyrene chain growth is confirmed by the atomic force microscopy images.     

A facile strategy for the functionalization of poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] materials

Recently, a new type of phosphazene‐containing material, poly[cyclotriphosphazene‐co‐(4,4′‐sulfonyldiphenol)] (PZS), was successfully prepared. PZS materials including PZS nanotubes, PZS nanofibers and PZS microspheres show excellent thermal stability, biocompatibility and biodegradability. Moreover, PZS‐containing materials such as silver nanowire/PZS, carbon nanotube/PZS and Fe₃O₄/PZS nanotubes have also been prepared. Therefore, we explored a specific method for the functionalization of these PZS and PZS‐containing materials to expand their scope of application. As a model of various PZS and PZS‐containing materials, PZS microspheres (PZSMs) were functionalized via surface‐initiated atom transfer radical polymerization (ATRP). Polymerization of styrene occurred at surface sites covalently derivatized with ATRP initiators to form PZSM–polystyrene. The number‐average molecular weight (M_n) of grafted polymer chains could be well controlled. Furthermore, PZSM–polystyrene was still active for further block copolymerization of methyl methacrylate. Both styrene‐ and acrylate‐type monomers could be directly polymerized or block copolymerized from the surface of PZS and PZS‐containing materials using surface‐initiated ATRP. M_n of grafted polymer chains could be well controlled. This facile strategy could pave the way for a wider range of applications of these materials. Copyright © 2010 Society of Chemical Industry     

Iron(III) complexed with radiation‐grafted acrylic acid onto poly(tetrafluoroethylene‐co‐perfluorovinyl ether) films

To introduce functional moieties to a poly(tetrafluoroethylene‐co‐perfluorovinyl ether) film, graft copolymerization of vinyl monomers such as acrylic acid was attempted by a simultaneous technique in aqueous solution using γ‐irradiation. The graft copolymers were complexed with the Fe(III) in aqueous solution. The grafted copolymer–metal complexes were examined by infrared (IR), ultraviolet/visible, energy‐dispersive X‐ray spectroscopy, and electron spin resonance techniques. The effect of temperature on the trunk copolymer, untreated grafted, and treated grafted copolymer films was investigated by IR and thermogravimetric analysis. The overall results suggest octahedral structure for Fe(III) and revealed the high stability of the obtained ligand–metal complexes. Furthermore, scanning electron microscope investigation of the grafted and modified films, both unheated and heated (200°C), showed changes in the structure and surface morphology. Promising results were achieved enhancing the practical applications of modified grafted membranes in the recovery of metal ions from aqueous systems. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 4065–4071, 2007     

Effect of aging on synthesis of graft copolymer of EPDM and styrene (EPDM‐g‐PS)

The effect of aging on synthesis by the graft copolymerization of styrene onto random ethylene–propylene–diene monomer with benzoyl peroxide (BPO) as the initiator is described. Results showed that yields of graft copolymer are increased in the first 10 min. After 10 min, the total polymer produced has a maximum at about 25 min. However, the portion of the graft copolymer is decreased and the portion of the pure polystyrene is increased. In addition, the influence factors, such as reaction time, temperature, BPO concentrations and styrene concentrations, effect of solvents on the extent of graft copolymerization were discussed. The extent of grafted copolymerization was verified by hexane and acetone Soxhlet (solvent extraction). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4809–4813, 2006     

纤维素与己内酰胺接枝共聚改性研究

纤维素是一种重要的天然生物可降解聚合物,将纤维素与己内酰胺接枝共聚可以改性天然纤维素的不足。以纤维素为原料,讨论其在DMAC/LiCl体系有机相中溶解性质及与己内酰胺的接枝共聚反应,并对接枝物进行了表征测试。     

Moisture regain and dyeability of poly(acrylic acid)- and poly(styrene)-carbamoylethylated cotton graft copolymers induced by gamma radiation

Gamma radiation-induced graft copolymerization of either acrylic acid or styrene onto untreated cotton, alkali-treated cotton, and carbamoylethylated cottons having 0.392% N, 0.524% N, 0.725% N, 1.379% and 1.546% N was investigated under different conditions. Moisture regain and dyeability of these substrates before and after copolymerization were also examined. It was found that the graft yield increases by increasing monomer concentration and radiation dose irrespective of the monomer or substrate used. Using water-ethanol mixtures as polymerization media are advantageous for grafting of styrene. With both monomers, however, the graft yield for the modified cottons are substantially higher than untreated and alkali-treated cottons, indicating that the presence of carbamoylethyl in the molecular structure of cotton cellulose affords additional sites for graft copolymerization. Copolymers obtained using acrylic acid show much higher moisture regain that the ungrafted substrates, particularly when the carboxylic groups of the graft were in the sodium form. The opposite holds true for copolymers brought about by grafting with styrene. The color strength of all substrates dyed with a direct or a reactive dye decreases significantly after copolymerization with poly(acrylic acid) prior to dyeing. On the other hand, this copolymerization improves the affinity of the substrates for the basic dye and brings about perceptible shade. Copolymerization of the substrates in question with poly(styrene) improves the color strength of these substrates when dyed with direct, disperse, and basic dyes but decreases the color strength upon dyeing with a reactive dye.     

Graft copolymerization of methylmethacrylate with N‐substituted maleimide‐styrene copolymer by ATRP

Atom transfer radical polymerization (ATRP) was employed to prepare graft copolymers having poly(MBr)‐alt‐poly(St) copolymer as backbone and poly(methyl methacrylate) (PMMA) as branches to obtain heat resistant graft copolymers. The macroinitiator was prepared by copolymerization of bromine functionalized maleimide (MBr) with styrene (St). The polymerization of MMA was initiated by poly(MBr)‐alt‐poly(St) carrying bromine groups as macroinitiator in the presence of copper bromide (CuBr) and bipyridine (bpy) at 110°C. Both macroinitiator and graft copolymers were characterized by ¹H NMR, GPC, DSC, and TGA. The ATRP graft copolymerization was supported by an increase in the molecular weight (MW) of the graft copolymers as compared to that of the macroinitiator and also by their monomodal MW distribution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

New epoxy/silica‐titania hybrid materials prepared by the sol–gel process

A new type of inorganic‐polymer hybrid materials of epoxy/silica‐titania had been prepared by incorporating grafted epoxy, which had been synthesized by epoxy and tetraethoxysilane (TEOS), with highly reactive TEOS and tetrabutyltitanate (TBT) by using the in situ sol–gel process. The grafted epoxy was confirmed by Fourier transform infrared spectroscopy (FT‐IR) and ¹H‐NMR spectroscopic technique. Results of FT‐IR spectroscopy and atomic force microscopy (AFM) demonstrated that epoxy chains have been covalently bonded to the surface of the SiO₂‐TiO₂ particles. The particles size of SiO₂‐TiO₂ are about 20–50 nm, as characterized by AFM. The experimental results showed that the glass‐transition temperatures and the modulus of the modified systems were higher than that of the unmodified system, and the impact strength was enhanced by two to three times compared with that of the neat epoxy. The morphological structure of impact fracture surface and the surface of the hybrid materials were observed by scanning electron microscopy and AFM, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1075–1081, 2006     

Preparation of monodispersed and lipophilic attapulgite and polystyrene nanorods via surface‐initiated atom transfer radical polymerization

A new kind of initiator, 3‐(2‐bromo‐2‐methylacryloxy)propyltriethysiliane (MPTS‐Br), was prepared with a simply hydrobrominated commercial silane coupling agent (3‐methacryloxy‐proplytriethysilane, MPTS). It has been one‐step self‐assemble onto the surface of attapulgite (ATP) nanorods in the dispersion system, and by using this initiator‐modified nanorod (MPTS‐Br‐modified ATP nanoparticles, ATP‐MPTS‐Br) as macroinitiator for atom transfer radical polymerization (ATRP). Structurally well‐defined homopolymer polystyrene (PS) and block polymer poly(styrene‐b‐methyl methacrylate) (PS‐b‐PMMA) chains were then grown from the needle‐shaped nanorods surface to yield monodispersed nanorods composed of ATP core and thick‐coated polymer shell (ATP and PS). The graft polymerization parameters exhibited the characteristics of a controlled/”living” polymerization. The PS‐grafted ATP nanorods could be dispersed well in organic solvent with nanoscale. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Chemical grafting of metallocene‐catalyzed functional polypropylene copolymer on glass substrates through surface modification

This work deals with surface modification of soda‐lime glass slides which, by itself, does not have hydroxyl groups at the surface. So, a glass surface pretreatment is needed, to create hydroxyl groups onto it, before carrying out the polypropylene (PP) grafting reaction. Different acid/base pretreatments were performed to develop an adequate concentration of superficial hydroxyl groups. Subsequently, a metallocenic polymerization (propylene‐α olefin graft reaction, catalyzed by EtInd₂ZrCl₂/methylaluminoxane), was carried out to provide graft‐PP chains chemically linked to the glass surface. The surface so modified can be further functionalized and tailored for different applications, including polymer composites. The pretreatment conditions that best preserved homogeneity and caused less damage to the glass surface resulted from a step of contact with dilute HF/NH₄F buffer, a washing step with distilled water, and a final exposure to KOH. After the propylene copolymerization was performed, part of the graft copolymer formed remained chemically bonded to the glass slide surface. The presence of grafted PP at the surface was confirmed by SEM, FTIR, and EDAX characterization, even after the physically adsorbed polymer was excluded by a severe solvent extraction treatment. From these results, the copolymerization of a hydroxy α‐olefin, grafted on a MAO‐pretreated glass slide, is foreseen as a possible way to graft polymers onto inorganic solids. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Surface‐initiated atom transfer radical polymerization of regenerated cellulose membranes with thermo‐responsive properties

Using atom transfer radical polymerization (ATRP), thermo‐responsive regenerated cellulose membranes were synthesized. Regenerated cellulose membranes were firstly modified by reacting the hydroxyl groups on the surface with 2‐bromoisobutyryl bromide, followed by grafting with poly(N‐isopropylacrylamide). The membranes had obvious thermally modulated permeability properties. Analysis was carried out by means of X‐ray photoelectron spectroscopy, attenuated total reflection Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis. The results showed that N‐isopropylacrylamide had been grafted successfully on the surface of the regenerated cellulose membranes. The thermally modulated permeability properties of the grafted membranes were studied using water flux measurements. It was found that the thermally modulated permeability properties of a cellulose surface can be tailored by the use of the ATRP method. Copyright © 2010 Society of Chemical Industry     

丙烯腈-三元乙丙橡胶-苯乙烯接枝共聚物AES的合成

用溶液聚合法合成了丙烯腈-三元乙丙橡胶-苯乙烯接枝共聚物（AES）,研究了接枝聚合反应的影响因素,并进行了红外光谱表征。结果表明,三元乙丙橡胶（EPDM）已接枝上丙烯腈（AN）和苯乙烯（St）的共聚物（SAN）支链,即EPDM与AN及St发生了接枝共聚合反应。     

Initiation of surface graft polymerization by ceric ions on polymer microspheres

The surface graft polymerization of acrylamide on poly(styrene‐co‐acrylonitrile) copolymer microspheres by the initiation of ceric ions was studied. The grafting was verified by IR spectra and X‐ray photoelectron spectroscopy measurements. The resultant microspheres with surface‐grafted polymer chains were employed in the preparation of polymer‐microsphere‐supported palladium composite particles. The composite particles were then studied by transmission electron microscopy and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 936–940, 2003     

Preparation of acrylate copolymer modified by TiO2 nanoparticles with excellent photo‐oxidative stability for application in ancient ivory conservation

In this work, acrylate copolymer has been fabricated by graft copolymerization of acrylate monomer (EMA:EA is 70:30) with functional TiO₂ nanoparticles, which was surface‐modified by the silane coupling agent methacryloxy propyl trimethoxyl silane (KH570) to attach active ends. The structure and properties of the copolymer were characterized by FT‐IR, FE‐SEM, differential scanning calorimetry, thermogravimetric analysis, ultraviolet‐visible spectra, and discoloration. Characterization revealed that functional TiO₂ particles were grafted onto the chain of the acrylate copolymer and the acrylate copolymer showed excellent photo‐oxidative stability and transparency. The acrylate copolymer was applied to protect and consolidate ancient ivory by surface coating without destruction of chemical structure. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43291.     

Characterization of products prepared by homogeneous grafting of styrene onto cellulose in a sulfur dioxide–diethylamine–dimethyl sulfoxide medium

Homogeneous graft copolymerization of styrene onto cellulose was carried out using a SO₂–DEA–DMSO cellulose solvent reaction medium and γ-ray mutual irradiation. The yield of grafted side chain polymer and the homopolymer in this reaction system proved to be polysulfone, a styrene–sulfur dioxide copolymer in which the number of sulfur atoms per polymer chain is 3–3.5. Several characterizations of the graft product were attempted. The graft products were extracted with boiling benzene for 24 hr to remove homopolymer, and then the cellulose backbones were hydrolyzed. After hydrolysis, the polysulfone residues were separated by thin-layer chromatography (TLC) into two components, i.e., attendant homopolysulfone and the true side chain polysulfone having some sugar residues at one of the polymer chain ends. The weight fraction of these components for each graft product was determined by a TLC scanner. The molecular weight of the side chain polysulfone remained constant and significantly lower than that of the homopolysulfone throughout the reaction period. By assuming that no scission of cellulose chains occurred throughout the graft reaction, the number of branches per starting cellulose molecule was assessed to be surprisingly large, ranging from 2.4 to 10.6 at a total dose of 1–8 mR of irradiation. It was also found that percent grafting increased with irradiation time because of an increase in the number of branches per cellulose chain. Furthermore, we succeeded in separating the graft product into ungrafted cellulose and the true graft copolymer containing a small amount of attendant hompolysulfone.