Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of different alkyl side chains on solid surface tension of polymethacrylates

Low‐rate dynamic contact angles on poly(t‐butyl methacrylate) (PtBMA) were measured by an automated axisymmetric drop shape analysis profile (ADSA‐P). The solid surface tension of PtBMA is calculated to be 18.1 mJ/m², with a 95% confidence limit of ±0.6 mJ/m². This value was compared to previous results with different homopolymeric polymethacrylates [poly(methyl methacrylate) (PMMA), poly(ethyl methacrylate) (PEMA), and poly(n‐butyl methacrylate) (PnBMA)] and with copolymeric polymethacrylates {poly(methyl methacrylate/ethyl methacrylate, 30/70) [P(MMA/EMA, 30/70)] and poly(methyl methacrylate/n‐butyl methacrylate) [P(MMA/nBMA)]}. It was found that increasing length and size of the alkyl side chain decrease the solid surface tension, as expected. Comparison with pure alkyl surfaces suggests that the surface tension of PtBMA is dominated by the very hydrophobic t‐butyl group. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2493–2504, 2000     

Reactions of copper ions with amines in the presence of self‐assembled fluorinated oligomeric aggregates

Copper acetylacetonate reacted with N,N‐diethylmethylamine and 4,4′‐thiobis(6‐t‐butyl‐o‐cresol) in the presence of self‐assembled fluorinated oligmeric aggregates formed by fluoroalkyl end‐capped 2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate–N,N‐dimethylacrylamide cooligomer [R_F–(BTRI)_x–(DMAA)_y–R_F; R_F = CF(CF₃)OCF₂CF(CF₃)OC₃F₇] to afford stable fluorinated aggregates–copper ions nanocomposites. These fluorinated oligomeric aggregates–copper ions nanocomposites thus obtained were applied to the dispersion of copper ions nanocomposites above the traditional organic polymeric materials such as poly(methyl methacrylate) (PMMA) surface. On the other hand, copper (II) chloride reacted with hydrazine hydrate in the presence of fluorinated oligomeric aggregates formed by fluoroalkyl end‐capped N,N‐dimethylacrylamide homooligomer to afford stable copper nanoparticles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1328–1334, 2006     

Synthesis and characterization of the environmental‐sensitive hyperbranched polymers as novel carriers for controlled drug release

Novel hyperbranched polymers, which contain a hydrophobic branched poly(p‐(chloromethy)styrene) (PCMS) core and poly(N,N‐dimethylaminoethyl methacrylate) (PDMA) shell that exhibited environmental sensitivity, have been synthesized by atom transfer radical polymerization (ATRP). At first, a hyperbranched polymer (PCMS) core is obtained via ATRP of p‐(chloromethy)styrene (CMS), which may act as an “inimer”‐monomer and initiator. Then the modified hyperbranched polymers having different average arm length consisting of PCMS and PDMA are synthesized by ATRP using anterior PCMS as macroinitiators. Their macromolecular structures are characterized by FTIR and ¹H NMR. Using chlorambucil as a model drug, the behaviors of the controlled drug release from the environmental‐sensitive hyperbranched polymers with different average chain length of PDMA and degree of branching are studied. The data demonstrate that the rate of the drug release can be effectively controlled by pH value, and these environmental‐sensitive hyperbranched polymers have the potential to be used as novel carriers in some controlled drug release systems in the future. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 311–316, 2006     

Solution properties of hyperbranched polymers and synthetic application for amphiphilic star‐hyperbranched copolymers by grafting from hyperbranched macroinitiator

Hyperbranched polystyrenes (PS) were prepared by living radical photopolymerization of N,N‐diethyldithiocarbamoylmethylstyrene (DTCS) as an inimer under UV irradiation. Branched PS with an average chain length between branching points of four styrene units was also prepared by living radical copolymerization of DTCS with styrene. The ratio of radius of gyration to hydrodynamic radius R_G/R_H for these hyperbranched polymers was in the range 0.82–0.89 in toluene. The translational diffusion coefficient D(C) showed a constant value in the range of 0–14 × 10^?3 g ml^?1 in toluene. It was found from these dilute solution properties that hyperbranched PSs formed a unimolecular structure even in a good solvent because of their compact nature. These hyperbranched PSs exhibited large amounts of photofunctional carbamate (DC) groups on their outside surfaces. Subsequently, we derived amphiphilic star‐hyperbranched copolymers by grafting from hyperbranched macroinitiator with 1‐vinyl‐2‐pyrrolidinone. These star‐hyperbranched copolymers were soluble in water and methanol. © 2001 Society of Chemical Industry     

Preparation,characterization, and thermal properties of polystyrene‐block‐quaternized poly(4‐vinylpyridine)/Montmorillonite nanocomposites

Polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) was synthesized by two steps of reversible addition‐fragmentation transfer (RAFT) polymerization of styrene (St) and 4‐vinylpyridine (4VP) successively. After P4VP block was quaternized with CH₃I, PS‐b‐quaternized P4VP/montmorillonite (PS‐b‐QP4VP/MMT) nanocomposites were prepared by cationic exchange reactions of quaternary ammonium ion in the PS‐b‐QP4VP with ions in MMT. The results obtained from X‐ray diffraction (XRD) and transmission electron microscopy (TEM) images demonstrate that the block copolymer/MMT nanocomposites are of intercalated and exfoliated structures, and also a small amount of silicates' layers remained in the original structure; differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) results show that the nanocomposites displayed higher glass transition temperature (T_g) and higher thermal stability than that of the corresponding copolymers. The blending of PS‐b‐QP4VP/MMT with commercial PS makes MMT to be further separated, and the MMT was homogeneously dispersed in the polymer matrix. The enhancement of thermal stability of PS/PS‐b‐QP4VP/MMT is about 20°C in comparison with commercial PS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1950–1958, 2006     

Synthesis and characterization of four‐arm star‐shaped polymers and copolymers

Four‐arm star‐shaped polymers and copolymers were obtained by transition metal‐catalyzed atom‐transfer radical polymerization (ATRP). The polymers were characterized by FTIR and ¹H‐NMR spectroscopy. Gel permeation chromatography results indicated the formation of polystyrene and polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA) arms with controlled molecular weights. In dilute solution, the linear polymers had higher inherent viscosities than star‐shaped ones. Thermogravimetric analysis showed a similar degradation mechanism for linear and star‐shaped polymers. Differential scanning calorimetry indicated the successful formation of diblock star‐shaped copolymers. Copyright © 2006 Society of Chemical Industry     

Preparation and morphology of amphiphilic polystyrene–poly (2‐vinylpyridine) heteroarm star copolymers prepared by ATRP

BACKGROUND: The self‐assembly of amphiphilic copolymers has been demonstrated to be a powerful route towards supramolecular objects with novel architectures, functions and physical properties. In this study, the synthesis and morphology of amphiphilic linear polystyrene (PS)‐block‐poly(2‐vinylpyridine) (P2VP) and heteroarm star PS‐star‐P2VP copolymers are studied. The dispersion of silver nanoparticles with the prepared PS‐block‐P2VP and PS‐star‐P2VP copolymers is also discussed. RESULTS: Amphiphilic copolymers with different P2VP chain lengths were successfully synthesized using atom transfer radical polymerization (ATRP). The copolymers prepared had low polydispersity indices. Various aggregate morphologies, including spheres, vesicles, rods, large compound micelles, two‐dimensional ring‐like and three‐dimensional hollow structures, were formed by varying the hydrophilic coil length and the selective solvent content. Silver nanoparticles showed good dispersion behavior in both types of copolymers. CONCLUSION: Based on this study, it will be possible to prepare metal/copolymer nanocomposites by direct mixing. Further, the PS‐block‐P2VP and PS‐star‐P2VP copolymers prepared can be used in the preparation of nanoporous films as templates and nanoparticles as nanoreactors. They can also be applied in terms of oil recovery, paints and cosmetics formulations, as well as in pharmaceutical and medical applications as rheological agents. Copyright © 2008 Society of Chemical Industry     

pH‐ and temperature‐sensitive microfiltration membranes from blends of poly(vinylidene fluoride)‐graft‐poly(4‐vinylpyridine) and poly(N‐isopropylacrylamide)

The copolymer poly(vinylidene fluoride)‐graft‐poly(4‐vinylpyridine) (PVDF‐g‐P4VP) was prepared through the graft copolymerization of poly(vinylidene fluoride) with 4‐vinylpyridine. Through the blending of the PVDF‐g‐P4VP copolymer with poly(N‐isopropylacrylamide) (PNIPAm) in an N‐methyl‐2‐pyrrolidone solution, PVDF‐g‐P4VP/PNIPAm membranes were fabricated by phase inversion in aqueous media. Elemental analyses indicated that the blend concentration of PNIPAm in the blend membranes increased with an increase in the blend ratio used in the casting solution. Scanning electron microscopy revealed that the membrane surface tended to corrugate at a low PNIPAm concentration and transformed into a smooth morphology at a high PNIPAm concentration. The surface morphology and pore size distribution of the microfiltration membranes could be regulated by the blend concentration of the casting solution, temperature, pH, and ionic strength of the coagulation bath. X‐ray photoelectron spectroscopy revealed a significant enrichment of PNIPAm on the membrane surface. The flux of aqueous solutions through the blend membranes exhibited a pH‐ and temperature‐dependent behavior. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4089–4097, 2006     

Crystallization behavior of PEO in blends of poly(ethylene oxide)/poly(2‐vinyl pyridine)‐b‐(ethylene oxide) block copolymer

The crystallization behavior of two molecular weight poly(ethylene oxide)s (PEO) and their blends with the block copolymer poly(2‐vinyl pyridine)‐b‐poly(ethylene oxide) (P2VP‐b‐PEO) was investigated by polarized optical microscopy, thermogravimetric analysis, differential scanning calorimetry, and atomic force microscopy (AFM). A sharp decreasing of the spherulite growth rate was observed with the increasing of the copolymer content in the blend. The addition of P2VP‐b‐PEO to PEO increases the degradation temperature becoming the thermal stability of the blend very similar to that of the block copolymer P2VP‐b‐PEO. Glass transition temperatures, T_g, for PEO/P2VP‐b‐PEO blends were intermediate between those of the pure components and the value increased as the content of PEO homopolymer decreased in the blend. AFM images showed spherulites with lamellar crystal morphology for the homopolymer PEO. Lamellar crystal morphology with sheaf‐like lamellar arrangement was observed for 80 wt% PEO(200M) and a lamellar crystal morphology with grain aggregation was observed for 50 and 20 wt% blends. The isothermal crystallization kinetics of PEO was progressively retarded as the copolymer content in the blend increased, since the copolymer hinders the molecular mobility in the miscible amorphous phase. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Miscibility and morphological properties of quaternized polysulfone blends with polystyrene and poly(4‐vinylpyridine)

Quaternized polysulfones were synthesized by the quaternization reaction of chloromethylated polysulfone with different tertiary amines −N,N‐dimethylethylamine (DMEA) and N,N‐dimethyloctylamine (DMOA), respectively. New blends from these quaternized polysulfones (PSF‐DMEA or PSF‐DMOA) with polystyrene (PS) or poly(4‐vinylpyridine) (P4VP) were prepared by the solution casting method. Pure quaternized polysulfones, in N,N‐dimethylformamide (DMF)/methanol (MeOH) and DMF/water solvent/nonsolvent mixtures, and their blends with PS and P4VP, as well, were investigated by shear viscometry and viscoelasticity, atomic force microscopy, differential scanning calorimetry, and surface properties. The results obtained revealed that the blends have good miscibility. Surface morphology is characterized by roughness and nodules formations, depending on the alkyl radical lengths, composition of the polymer mixtures, including specific electron‐donor or electron‐acceptor characteristics of polymers. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Controllable self‐assembly of polystyrene‐block‐poly(2‐vinylpyridine)

Block copolymers can form various ordered structures by self‐assembly, and their composites with inorganic materials may give surprising properties. This review summarizes recent developments in the preparation, mechanism and application of various types of self‐assembly of polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP). The focus of the review is on how to control the self‐assembly of the dynamic and ordered structure of PS‐b‐P2VP based materials by applying effective factors such as thermal annealing, solvent annealing, block composition and blending. Moreover, the combination of the self‐assembly of PS‐b‐P2VP and various nanoparticles, with potentials in drug delivery, sensors and catalysis, is highlighted. © 2018 Society of Chemical Industry     

Nitroxide‐mediated synthesis of styrenic‐based segmented and tapered block copolymers using poly(lactide)‐functionalized TEMPO macromediators

Poly(styrene)‐poly(lactide) (PS‐PLA), poly (tert‐butyl styrene)‐poly(lactide) (PtBuS‐PLA) diblocks, and poly(tert‐butyl styrene)‐poly(styrene)‐poly(lactide) (PtBuS‐PS‐PLA) segmented and tapered triblocks of controlled segment lengths were synthesized using nitroxide‐mediated controlled radical polymerization. Well‐defined PLA‐functionalized macromediators derived from hydroxyl terminated TEMPO (PLA_T) of various molecular weights mediated polymerizations of the styrenic monomers in bulk and in dimethylformamide (DMF) solution at 120–130°C. PS‐PLA and PtBuS‐PLA diblocks were characterized by narrow molecular weight distributions (polydispersity index (M_w/M_n) < 1.3) when using the PLA_T mediator with the lowest number average molecular weight M_n= 6.1 kg/mol while broader molecular weight distributions were exhibited (M_w/M_n = 1.47‐1.65) when using higher molecular weight mediators (M_n = 7.4 kg/mol and 11.3 kg/mol). Segmented PtBuS‐PS‐PLA triblocks were initiated cleanly from PtBuS‐PLA diblocks although polymerizations were very rapid with PS segments ～ 5–10 kg/mol added within 3–10 min of polymerization at 130°C in 50 wt % DMF solution. Tapering from the PtBuS to the PS segment in semibatch mode at a lower temperature of 120°C and in 50 wt % DMF solution was effective in incorporating a short random segment of PtBuS‐ran‐PS while maintaining a relatively narrow monomodal molecular weight distribution (M_w/M_n ≈ 1.5). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and properties of amphiphilic star block copolymers with star macroinitiators based on a one‐pot approach

Previously, star polystyrenes (PSs) have been prepared by atom transfer radical polymerization (ATRP) of N‐[2‐(2‐bromoisobutyryloxy)ethyl]maleimide (BiBEMI) with a large excess of styrene (St) in one pot. But linear PSs were also present during the formation of the star polymers. In the work reported here, we found that control of the formation of star polymers using a one‐pot approach can be improved by using a two‐step process. The polymerization was conducted first at a low temperature to form multifunctional cores by copolymerization of BiBEMI and St. Second, on increasing the temperature, homopolymerization of St occurred to grow PS arms. Then a series of amphiphilic star polystyrene‐block‐poly(acrylic acid)s, (S₁₄A_x)₁₆, were prepared by ATRP of tert‐butyl acrylate with the star PSs as macroinitiators, followed by selective acidolysis of the poly(tert‐butyl acrylate) blocks. Their micellization was studied using dynamic light scattering, which suggested that (S₁₄A₁₁₂)₁₆ amphiphilic star block copolymers could form unimolecular micelles in a basic aqueous solution. Then pyrene molecules were encapsulated using the (S₁₄A₁₁₂)₁₆ amphiphilic star copolymers and the loading capacity was investigated with UV and fluorescence spectroscopy. © 2013 Society of Chemical Industry     

Effect of miscibility on migration of third component in star‐like co‐continuous and disperse‐within‐disperse mixed brushes

Novel ternary mixed‐brush single crystals were designed with disperse‐within‐disperse and star‐like co‐continuous morphologies based on poly(ethylene glycol) (PEG)‐b‐polystyrene (PS)/PEG‐b‐poly(methyl methacrylate) (PMMA)/PEG‐b‐polyaniline (PANI) and PEG‐b‐PS/PEG‐b‐PMMA/PEG‐b‐(poly(?‐caprolactone) (PCL) or poly(l ‐lactide) (PLLA)) block copolymers, respectively. In the disperse‐within‐disperse ternary mixed brushes, PANI nanorods were dispersed within the matrix (PS)–dispersed (PMMA) amorphous brushes. The flexibility and rigidity of brushes mainly affected the ultimate morphology and arrangement of amorphous coiled brushes in the vicinity of PANI nanorods. In addition, the migration of PCL and PLLA crystallizable brushes was evident into PMMA phases dispersed in the PS matrix, leading to star‐like co‐continuous patterns of PCL and PLLA brushes. This phenomenon was related to the miscibility of crystallizable PCL and PLLA brushes with the PMMA phase. The migration of crystallizable PCL and PLLA brushes increased the size of PMMA domains in the star‐like co‐continuous patterns. Despite the larger osmotic pressure of PLLA brushes, their higher miscibility with PMMA chains reflected the greater PMMA dispersal and wider PLLA star‐like branches. © 2017 Society of Chemical Industry     

Novel synthesis and solution properties of hyperbranched poly(ethyl methacrylate)s by quasi‐living radical copolymerization using photofunctional inimer

Hyperbranched poly(ethyl methacrylate)s (PEMA) were prepared by quasi‐living radical copolymerization of 2‐(N,N‐diethylaminodithiocarbamoyl)‐ethyl methacrylate (inimer: DTEM) with ethyl methacrylate (EMA) under UV irradiation. DTEM monomers play an important role in this copolymerization system as inimers capable of initiating living radical polymerization of the vinyl group. Two monomers (DTEM and EMA) showed almost equal reactivity toward both propagating species, and the copolymer composition was the same as the comonomer feed. This result means that both the branching and chain length of the hyperbranched molecules can be controlled statistically by the feed monomer ratios. The compact nature of the hyperbranched macromolecules is demonstrated by comparison of their solution properties with the linear analogues. Copyright © 2004 Society of Chemical Industry     

External Stimuli‐Responsive Characteristics of Ionic Poly[(N,N‐diethylaminoethyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)] Hydrogels

Summary: Polyelectrolyte hydrogels containing diprotic acid moieties sensitive to ionic strength changes of the swelling medium were synthesized from N,N‐diethylaminoethyl methacrylate (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP) and itaconic acid (IA) by using ammonium persulfate (APS) as a free radical initiator in the presence of the cross‐linker, methylenebisacrylamide (MBAAm). The swelling behavior of the ionic poly[(N,N‐diethylaminoethyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)] [P(DEAEMA/VP)] hydrogels were investigated in pure water; in NaCI solutions with pH 4 and 9; and in water‐acetone mixtures depending on the IA content in the hydrogel. The average molecular mass between cross‐links ( ) and polymer‐solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The pulsatile swelling behavior was also observed in response to solvent changes between the solution in water and in acetone. The equilibrium swelling ratio of these hydrogels was basically unaffected with change in temperature. The swelling variations were explained according to the swelling theory based on the hydrogel chemical structure.

Pulsatile swelling behavior of ionic P(DEAEMA/VP) hydrogels in response to solvent changes between water and acetone at 25 °C.     

Architecture of colloidal crystals constructed by silica hybrid nanoparticles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter D_n = 192 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brushes encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization (ATRP) approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. We constructed the colloidal crystals using these photofunctional particles. Moreover, the SiO₂ particle array of colloidal crystals was locked by radical photopolymerization with vinyl monomer as a matrix. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Acrylate/EVA reactive blends and semi‐IPN: Chemical,chemical–physical,and thermo‐optical characterization

In the present work, blends between poly(methyl methacrylate) (PMMA) or its copolymer with butyl methacrylate P(MMA‐co‐BMA) and poly(ethylene‐co‐vinyl acetate) (EVA) rubbers obtained applying the reactive blending principles were deeply investigated to clarify the chemistry of the system. A copolymeric phase, which is created in situ, was isolated and its chemical structure was determined through NMR analysis. The blends were also crosslinked with a flexible dimethacrylate to realize semi‐interpenetrated networks. The blends were characterized for their properties of interest (mechanical and optical behaviors). Particularly, an accurate investigation of the optical properties as a function of the temperature was performed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Mixed monolayers of pmas with poly(styrene‐b‐methyl methacrylate) at the air/water interface

Poly(methyl methacrylate) (PMMA) is known to be immiscible with poly(styrene) (PS) in the bulk state. Poly(ethyl methacrylate) (PEMA), poly(propyl methacrylate) (PPMA), and poly(n‐butyl methacrylate) (PBMA) are also known to be immiscible with PMMA (or PS). Therefore, PMAs (PMMA, PEMA, PPMA, and PBMA) are predicted by the mean field theory to be immiscible with poly(styrene‐b‐methyl methacrylate) (PS‐b‐PMMA) in the bulk state. However, the miscibility of PMAs with PS‐b‐PMMA may be different in the two‐dimensional state. Therefore, the mixed monolayer behavior of PMAs and PS‐b‐PMMA was investigated from the measurements of surface pressure‐area per molecule (π‐A) isotherms at three different temperatures (10°C, 25°C, and 40°C). Calculation of compressibility from isotherms provided the inflection data from maximum and minimum peaks. The miscibility and nonideality of the mixed monolayers were examined by calculating the excess area as a function of composition. Mostly, negative deviations from ideality were observed in the mixed monolayers. This is likely because of favorable interaction between PMMA and PMAs in the monolayer state. The positive deviations occurred at 40°C with PBMA at a high surface pressure. Therefore, with confinement in the two‐dimensional state, the miscibility between PMAs and PS‐b‐PMMA was greatly improved in comparison with the bulk state. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers