MAPP/EAA处理对聚丙烯/小麦秸秆粉复合材料性能的影响

研究了马来酸酐接枝聚丙烯（MAPP）、乙烯丙烯酸共聚物（EAA）处理对聚丙烯（PP） /小麦秸秆粉（WSP）复合材料性能的影响。结果表明,随着体系中MAPP质量份数的增加,PP/WSP的拉伸强度和弯曲强度均逐渐增大,但冲击强度却先增加后减小,复合材料达到塑化峰的时间逐渐延长;使用EAA后,无论体系中是否已经使用了MAPP,PP/WSP的拉伸、弯曲和冲击强度均可得以提高,特别对于未使用MAPP的体系,效果更加明显,可分别提高65.04 %、45.42 %和6.75 %,储能模量增加,表面疏水性增强,平衡扭矩从13.9 N·m降至11.8 N·m,吸水尺寸变化率及吸水率下降,吸水平衡时间缩短;使用EAA可改善PP/WSP中WSP与PP间的界面结合,改善PP/WSP力学性能、热稳定性能、表面疏水性能、尺寸稳定性能和加工性能,降低其吸水率。     

Morphological,mechanical, and physical properties of composites made with wood flour‐reinforced polypropylene/recycled poly(ethylene terephthalate) blends

Wood flour (WF)‐filled composites based on a polypropylene (PP)/recycled polyethylene terephthalate (r‐PET) matrix were prepared using two‐step extrusion. Maleic anhydride grafted polypropylene (MAPP) was added to improve the compatibility between polymer matrices and WF. The effects of filler and MAPP compatibilization on the water absorption, mechanical properties, and morphological features of PP/r‐PET/WF composites were investigated. The addition of MAPP significantly improved mechanical properties such as tensile strength, flexural strength, tensile modulus, and flexural modulus compared with uncompatibilized composites, but decreased elongation at break. Scanning electron microscopic images of fracture surface specimens revealed better interfacial interaction between WF and polymer matrix for MAPP‐compatibilized PP/r‐PET/WF composites. MAPP‐compatibilized PP/r‐PET/WF composites also showed reduced water absorption due to improved interfacial bonding, which limited the amount of absorbable water molecules. These results indicated that MAPP acts as an effective compatibilizer in PP/r‐PET/WF composites. POLYM. COMPOS., 38:1749–1755, 2017. © 2015 Society of Plastics Engineers     

Hygrothermal aging and tensile behavior of injection‐molded rice husk‐filled polypropylene composites

The effect of the filler volume fraction on the tensile behavior of injection‐molded rice husk‐filled polypropylene (RH–PP) composites was studied. Hygrothermal aging behavior was also investigated by immersing the specimens in distilled water at 30 and 90°C. The kinetics of moisture absorption was studied from the amount of water uptake by specimens at regular interval times. It was found that the diffusion coefficient and the maximum moisture content are dependent on the filler volume fraction and the immersion temperatures. Incorporation of RH into the PP matrix has led to a significant improvement in the tensile modulus and a moderate improvement in the tensile strength. Elongation at break and energy at break, on the other hand, decreased drastically with the incorporation of the RH filler. The extent of deterioration incurred by hygrothermal aging was dependent on the immersion temperature. Both the tensile strength and tensile modulus deteriorated as a result of the combined effect of thermal aging and moisture attack. Furthermore, the tensile properties were not recovered upon redrying of the specimens. Scanning electron microscopy was used to investigate the mode of failure of the RH–PP composites. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 742–753, 2001     

Sunflower seed cake as reinforcing filler in thermoplastic composites

Dimensional stability, mechanical properties, and melting and crystallization behavior of polypropylene composites filled with sunflower seed cake (SSC) were investigated. Injection molded composites were prepared from the SSC flour and polypropylene with and without maleic anhydride‐grafted polypropylene (MAPP) at 30, 40, 50, and 60 wt % contents of the SSC flour. Twenty‐eight days thickness swelling and water absorption values of the specimens increased by 43 and 56% as the filler content increased from 30 to 60 wt %, respectively. The flexural modulus of the polypropylene composites increased from 3157 to 4363 MPa as the SSC flour increased from 30 to 60 wt %. The maximum flexural strength 38.4 MPa was observed for 40 wt % SSC flour filled specimens. However, further increment in the SCC flour decreased the flexural strength to 31.4 MPa. The tensile strength of the specimens decreased from 22.5 to 14 MPa while the tensile modulus increased from 3023 to 3677 MPa as the SSC flour increased from 30 to 60 wt %. The dimensional stability and mechanical properties of the composites were significantly improved by the incorporation of the coupling agent (MAPP). The effect of the MAPP addition was more pronounced for the strength than for the modulus. The melting temperature and degree of crystallinity of the neat polypropylene decreased with increasing content of the SSC flour. The degree of crystallinity of filled composites considerably increased with the incorporation of the MAPP. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of hydrothermal environment on moisture absorption and mechanical properties of wood flour–filled polypropylene composites

The moisture absorption and mechanical properties of wood flour–filled polypropylene composites in a hydrothermal environment have been studied by immersing the composites in water at 23, 60, and 100°C. The degree of moisture absorption was found to be dependent on the modification of matrix, the weight percentage, mesh size, and surface treatment of wood flours. It increased with increasing the immersion temperature. The tensile strength of all composites with wood flours of different contents, mesh sizes, and surface treatments increased after immersion in water baths of various temperatures, to either greater or lesser extents. The flexural strength and modulus followed a similar trend when immersed in water at ambient temperature. However, the contrary was true for composites when immersed in 60 and 100°C water baths. The impact strength increased after immersion in water at each immersion temperature, and the extent of such increment decreased with increasing the immersion temperature. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2824–2832, 2002     

Effect of fiber/matrix chemical modification on the mechanical properties and water absorption of extruded flax/polypropylene composite

Compound of flax/polypropylene (PP) is characterized concerning the mechanical properties of stiffness, strength, and impact in addition to the water absorption behavior. Manufacturing takes place by twin‐screw extruder. The extruder screw layout is modified through different kneading elements to get high fiber aspect ratio. Sodium hydroxide solution was used as a washing solution for the flax fibers' surfaces. Both fiber and matrix are chemically modified. Selected groups of the fibers were further treated using trimethoxyvinylsilan TMVS and acrylic acid AA. The PP matrix is also treated with different coupling agents; namely, maleated PP MAPP, TMVS‐MAPP, and acrylic acid‐functionalized PP AAPP. The combinations of different fiber/matrix are extruder compounded, injection molded, and finally tested. Fiber modification seems to be positive with AA‐modified surface. AAPP matrix modification improves the stiffness four times that of the untreated flax/PP. Till 30 and 40 wt %, the more the fiber is the more the strength and stiffness, respectively. MAPP‐modified matrix improves the mechanical properties and keeps low water absorption values. AAPP‐modified matrix shows the best stiffness values. TMVS‐MAPP does not seem to have distinguished improvement compared with MAPP. NaOH‐TMVS/MAPP and NaOH‐TMVS/AAPP systems can serve as alternatives to the normal NaOH/MAPP treatment. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effects of silane coupling agent and maleic anhydride‐grafted polypropylene on the morphology and viscoelastic properties of polypropylene–mica composites

In this study, morphology, and dynamic and mechanical properties of polypropylene–mica (PP–Mica) composites were investigated. To enhance the adhesion between PP and mica, maleic anhydride‐grafted PP (MAPP) and treated mica with silane coupling agent were used. MAPP (as a compatibilizer) and silane coupling agent (as a filler surface modifier) caused an interfacial bonding in the mica filled polypropylene composites. The effect of mica content, MAPP, and treated mica with silane coupling agent on the morphological properties were investigated by Scanning Electron Microscopy (SEM). The results showed that with increasing MAPP or silane coupling agent, dispersion of filler and adhesion between PP and filler were improved. Mechanical data showed that with increasing MAPP and mica treated with silane coupling agent, tensile modulus and flextural strength of composites were enhanced. Dynamic rheological behavior of composites was also investigated within the domain of linear viscoelasticity. The rheological observations indicated that the complex viscosity, storage and loss moduli increased, and tan δ decreased with increasing mica content. POLYM. COMPOS. 27:491–496, 2006. © 2006 Society of Plastics Engineers.     

Kudzu fiber‐reinforced polypropylene composite

Kudzu fiber‐reinforced polypropylene composites were prepared, and their mechanical and thermal properties were determined. To enhance the adhesion between the kudzu fiber and the polypropylene matrix, maleic anhydride‐grafted polypropylene (MAPP) was used as a compatibilizer. A continuous improvement in both tensile modulus and tensile strength was observed up to a MAPP concentration of 35 wt %. Increases of 24 and 54% were obtained for tensile modulus and tensile strength, respectively. Scanning electron microscopy (SEM) showed improved dispersion and adhesion with MAPP. Fourier transform infrared (FTIR) spectroscopy showed an increase in hydrogen bonding with an increase in MAPP content. Differential scanning calorimetry (DSC) analysis indicated little change in the melting temperature of the composites with changes in MAPP content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1961–1969, 2002     

Influence of fiber treatment on the performance of sisal–polypropylene composites

This article concerns the effectiveness of MAPP as a coupling agent in sisal–polypropylene composites. The fiber loading, MAPP concentration, and fiber treatment time influenced the mechanical properties of the composites. It was observed that the composites prepared at 21 volume percent of fibers with 1% MAPP concentration exhibits optimum mechanical strength. SEM investigations confirmed that the increase in properties is caused by improved fiber‐matrix adhesion. The viscoelastic properties of the treated and untreated composites were also studied. From the storage modulus versus temperature plots, an increase in the magnitude of the peaks was observed with the addition of MAPP and fiber reinforcement, thus showing an improvement in stiffness of the treated composites. The damping properties of the composites, however, decreased with the addition of the fibers and MAPP. The thermal properties of the composites were analyzed through DSC and TGA measurements. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1336–1345, 2004     

Water uptake and mechanical characteristics of natural filler–polypropylene composites

Water uptake characteristics and some mechanical properties of polypropylene composites containing three types of natural fillers, purified α‐cellulose, wastepaper fibers, and wood flour were studied. The fiber contents were 15, 25, and 35% by weight. Two percent maleic anhydride polypropylene (MAPP) was also added to the mix, as the compatibilizer agent. Mixing process was performed in a Brabender Plasticorder until a constant torque was reached. Composites made out of these combinations were then pressed in a laboratory press and ASTM standard test specimens were cut out of the sheets. Water absorption and tensile tests were performed on these specimens. The results showed a significant difference between the various filler types regarding water uptake. Water uptake also increased by the increase in filler content. Tensile strength and elongation at break in composites declined when compared with pure polypropylene, but their modulus of elasticity increased. Among the three types of fillers, no significant discrepancies were observed in terms of improving mechanical properties in composites. Filler content increase had no drastic effect regarding strength improvement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 941–946, 2003     

Silica‐filled polypropylene composites: The effect of ethylene diamine dilaurate and maleic anhydride grafted polypropylene on mechanical properties,water absorption,morphology, and thermal properties

The effect of two compatibilizers, i.e. ethylene diamine dilaurate (EDD) and maleic anhydride grafted polypropylene (MAPP) on the mechanical properties, water absorption, morphology, and thermal properties of silica‐filled polypropylene (PP/Sil) composites were studied. The results show that the tensile, impact and flexural strengths (up to 2 php), Young's modulus, and elongation at break (Eb) increased with increasing EDD content. However, increasing MAPP content increases the tensile strength, Young's modulus, impact and flexural strengths, and water absorption resistance. At a similar compatibilizer content, EDD exhibits higher Eb, impact and flexural strengths but lowers tensile strength, Young's modulus, and water absorption resistance compared with MAPP. Scanning electron microscopy study of tensile fractured surfaces exhibits the evidence of better silica‐PP adhesion with MAPP and EDD compared with the similar composites but without compatibilizer. Fourier transform infra red spectra provide an evidence of interaction between EDD or MAPP with PP/Sil composites. Termogravimetry analysis results indicate that the addition of EDD or MAPP slightly increases the thermal stability of PP/Sil composites. Differential scanning calorimetry also indicates that PP/Sil composites with EDD or MAPP have higher heat fusion (ΔH_f(com)) and crystallinity (X_com) than similar composites but without compatibilizer. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Effect of stacking sequence on mechanical properties of hybrid flax/jute fibers reinforced thermoplastic composites

In this study, the hybrid composites were prepared by stacking jute/PP nonwoven and flax/MAPP woven fabrics in defined sequences. Polypropylene (PP) and maleic anhydride grafted polypropylene (MAPP) were used as matrix materials. Jute and flax fibers were treated with alkali solution in order to improve the interface properties of the resultant composites. The mechanical properties of these hybrid composites were analyzed by means of tensile, flexural, and drop‐weight impact tests. The effect of fabric stacking sequence on the mechanical properties of the composites was investigated. The stacking of nonwovens at the top and in alternate layers has resulted in maximum flexural strength, flexural stiffness, and impact force. It was also shown that hybrid composites have improved tensile, flexural, and impact properties in comparison to neat PP matrix. POLYM. COMPOS., 36:2167–2173, 2015. © 2014 Society of Plastics Engineers     

Influence of processing conditions and material compositions on the performance of formaldehyde‐free wood‐based composites

This study examined the differences between formaldehyde‐free wood composite panels made with maleated polyethylene (MAPE) and maleated polypropylene (MAPP) binding agents. Specifically, the study investigated the contrasts of (a) base resin type, PE vs. PP, (b) molecular weight/maleic anhydride content in MAPP binding agents, and (c) the manufacturing methods (reactive extrusion vs. hot press) on the physicomechanical properties of the composites. FTIR and XPS analyses of unmodified and modified wood particles after reactive extrusion with maleated polyolefins provided evidence of chemical bonding between the hydroxyl groups of wood particles and maleated polyolefins. Although extruding the particles before panel pressing gave better internal bond (IB) strength, superior bending properties were obtained through compression molding alone. MAPP‐based panels outperformed MAPE‐based panels in stiffness. Conversely, MAPE increased the IB strength of the panels compared with MAPP. Polymer base resin had no effect on modulus of rupture or screw holding capacity. Differences between the two maleated polypropylene compounds were not significant for any of the mechanical properties tested. Formaldehyde‐free wood composites manufactured in this study often outperformed standard requirements for conventional particleboard, regardless of material composition or manufacturing method used. POLYM. COMPOS., 27:599–607, 2006. © 2006 Society of Plastics Engineers     

Polypropylene/natural rubber composites filled with recycled newspaper: Effect of chemical treatment using maleic anhydride‐grafted polypropylene and 3‐aminopropyltriethoxysilane

A study on effect of chemical treatment using maleic anhydride‐grafted polypropylene (MAPP) and 3‐aminopropyltiethoxysilane (3‐APE) was investigated. The performance of the MAPP and 3‐APE were investigated by means of torque development, mechanical properties, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy morphology, and water absorption. The results revealed that the use of MAPP or 3‐APE in the composites has increased the stabilization torque, tensile strength, Young's modulus, water absorption, and thermal stability of the PP/NR composites. The incorporation of MAPP in the composites shows higher stabilization torque, tensile strength, E_B, Young's modulus, and lower water uptake when compared with the use of 3‐APE in the PP/NR composites. TGA and DSC results indicated that primary and secondary peak of DTG curve, initial degradation temperature (T₀), degradation temperature (T_deg), melting temperature (T_m), heat of fusion of composites (ΔH_f(com)), crystallinity of composites (X_PP), and PP (X_PP) increased, while total weight loss and thermal degradation rate decreased for both treated composites. The MAPP‐treated RNP‐filled PP/NR composites were found to be more thermal resistance and more crystalline than 3‐APE‐treated filled PP/NR RNP composites. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Isolation and characterization of betel nut leaf fiber: Its potential application in making composites

Betel nut leaf fiber (BNLF) is a new finding as cellulosic filler for polymer composites. Its main constituents are 75% α‐cellulose, 12% hemicelluloses, 10% lignin, and 3% others matter, viscosity average molecular weight 132,000 and degree of crystallinity 70%. In the present work, BNLF reinforced polypropylene (PP) composites were prepared using heat press molding method. 5–20 wt% short length fiber is taken for getting benefits of easy manufacturing and the fiber was chemically treated with NaOH, dicumyl peroxide (DCP), and maleic anhydride‐modified PP (MAPP) to promote the interfacial bond with PP. The extent of modification of fiber was assessed on the basis of morphology, bulk density, moisture absorption, thermal, and mechanical properties of untreated fiber, treated fiber, and their reinforcing PP composites. The tensile and flexural strength of composites increase with the increase of fiber loading up to 10 and 20 wt%, respectively. It was also observed that Young's modulus and flexural modulus increase with fiber loading. The thermal degradation behavior of resulting composites was investigated. Among the various treated fibers, MAPP‐treated fiber composite showed best interfacial interactions as well as mechanical and thermal properties. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Stiffness and strength of flax fiber/polymer matrix composites

Flax fiber composites with thermoset and thermoplastic polymer matrices have been manufactured and tested for stiffness and strength under uniaxial tension. Flax/polypropylene and flax/maleic anhydride grafted polypropylene composites are produced from compound obtained by coextrusion of granulated polypropylene and flax fibers, while flax fiber mat/vinylester and modified acrylic resin composites are manufactured by resin transfer molding. The applicability of rule‐of‐mixtures and orientational averaging based models, developed for short fiber composites, to flax reinforced polymers is considered. POLYM. COMPOS. 27:221–229, 2006. © 2006 Society of Plastics Engineers     

Effects of wheat straw fiber content and characteristics,and coupling agent concentration on the mechanical properties of wheat straw fiber‐polypropylene composites

Wheat straw fiber‐polypropylene (PP) composites were prepared to investigate the effects of wheat straw fiber content (10, 20, 30, 40, and 50 wt %), fiber size (9, 28, and 35 mesh), and maleic anhydride grafted polypropylene (MAPP) concentration (1, 2, 5, and 10 wt %) on the static and dynamic mechanical properties of the wheat straw fiber‐PP composites in this study. The tensile modulus and strength of the composites increased linearly with increasing wheat straw fiber content up to 40%, whereas the elongation at break decreased dramatically to 3.78%. Compared with the composites made of the longer wheat straw fiber, the composites made of the fines (>35 mesh) had a slightly higher tensile strength of 31.2 MPa and tensile elongation of 5.39% at break. With increasing MAPP concentration, the composites showed an increase in tensile strength, and the highest tensile strength of 34.0 MPa occurred when the MAPP concentration reached 10 wt %. As wheat straw fiber content increased from 0 to 40%, the flexural modulus of the composites increased gradually from 1335 to 3437 MPa. The MAPP concentration and wheat straw fiber size distribution had no appreciable effect on the static flexural modulus of the composites. The storage flexural modulus of the composites increased with increasing wheat straw fiber content. The scanning electron microscopy (SEM) observation on the fracture surface of the composites indicated that a high wheat straw fiber content (>30 wt %) resulted in fiber agglomeration and a reduction in interfacial bonding strength. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Bonding of air-formed wood fibre/polypropylene fibre composites

The effectiveness of a maleated polypropylene (MAPP) as a coupling agent in wood fibre/polypropylene fibre composites made by non-woven web technology has been evaluated. The composite panels were made with 70 or 85% wood fibre, wiht the MAPP being incorporated in the panels at a level of 1 or 3% by spraying an emulsified form on the wood fibres. Both levels of MAPP significantly increased bending and tensile strength and moduli, and dynamic modulus. At the 70% wood fibre level, impact energy was increased significantly in panels with 3% MAPP. At the 85% wood fibre level, both 1% and 3% MAPP significantly increased impact energy. The MAPP also led to small improvements in water resistance for composites containing 85% wood fibre. The effectiveness of MAPP is believed to be the result of efficient incorporation at the wood/polypropylene interface, thus providing effective coupling of the polar wood component to the non-polar polymer matrix.     

Influence of interfacial adhesion on the structural and mechanical behavior of PP‐banana/glass hybrid composites

Hybrid composites of polypropylene (PP), reinforced with short banana and glass fibers were fabricated using Haake torque rheocord followed by compression molding with and without the presence maleic anhydride grafted polypropylene (MAPP) as a coupling agent. Incorporation of both fibers into PP matrix resulted in increase of tensile strength, flexural strength, and impact strength upto 30 wt% with an optimum strength observed at 2 wt% MAPP treated 15 wt% banana and 15 wt% glass fiber. The rate of water absorption for the hybrid composites was decreased due to the presence of glass fiber and coupling agent. The effect of fiber loading in presence of coupling agent on the dynamic mechanical properties has been analyzed to investigate the interfacial properties. An increase in storage modulus (E′) of the treated‐composite indicates higher stiffness. The loss tangent (tan δ) spectra confirms a strong influence of fiber loading and coupling agent concentration on the α and β relaxation process of PP. The nature of fiber matrix adhesion was examined through scanning electron microscopy (SEM) of the tensile fractured specimen. Thermal measurements were carried out through differential scanning calorimetry (DSC) and the thermogravimetric analysis (TGA), indicated an increase in the crystallization temperature and thermal stability of PP with the incorporation of MAPP‐treated banana and glass fiber. POLYM. COMPOS., 31:1247–1257, 2010. © 2009 Society of Plastics Engineers     

Open hole flexural and izod impact strength of unidirectional flax yarn reinforced polypropylene composites as a function of laminate lay‐up

An open hole flexural strength and impact energy of flax yarn‐reinforced polypropylene (PP) composites were studied in this work. Highest flexural strength and strength retention were observed for axial (0₆) and cross‐ply (0/90/0)_s laminates, respectively, while also examining the influence of laminate lay‐up and open hole size on flexural strength. It was found that maleic anhydride‐grafted polypropylene (MAPP)‐treated composite laminates achieved marginal improvement on flexural strength for all kinds of laminate lay‐up. Off‐axial laminates (±45₆) showed a good strength retention for open hole laminates after MAPP treatment. The fractography study confirmed microbuckling and matrix crack propagation over the compressive and tensile side of the laminate, respectively. Furthermore, severe surface damage was detected over the tensile side of 8‐mm hole size laminates. Impact test of the flax/PP laminates showed slight improvement by MAPP treatment. High‐ and low‐impact energy was experienced for axial and off‐axial laminates. The damaged impact sample shows evidence of fiber pull‐out for untreated flax yarn reinforced laminates. POLYM. COMPOS., 34:1912–1920, 2013. © 2013 Society of Plastics Engineers