Synthesis of poly(D,L‐lactic acid) modified by triethanolamine by direct melt copolycondensation and its characterization

Using D ,L ‐lactic acid (LA) and multifunctional group compound triethanolamine (TEA) as starting materials, a novel biodegradable material poly(D ,L ‐lactic acid‐triethanolamine) [P(LA‐TEA)] was directly synthesized by simpler and practical melt polycondensation. The appropriate synthetic condition was discussed in detail. When the molar feed ratio LA/TEA was 30/1, the optimal synthesis conditions were as follows: a prepolymerization time of 12 h; 0.5 weight percent (wt %) SnO catalyst; and melt copolycondensation for 8 h at 160°C, which gave a novel star‐shaped poly(D,L ‐lactic acid) (PDLLA) modified by TEA with the maximum intrinsic viscosity [η] 0.93 dL g⁻¹. The copolymer P(LA‐TEA) as a different molar feed ratio was characterized by [η], Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H‐NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). Increasing the molar feed ratio of LA/TEA, T_g and M_w increased. However, all copolymers were amorphous, and their T_g (12.2°C–32.5°C) were lower than that of homopolymer PDLLA. The biggest M_w was 9400 Da, which made the biodegradable polymer be potentially used as drug delivery carrier, tissue engineering material, and green finishing agent in textile industry. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of poly(D,L‐lactic acid) modified by cholic acid via direct melt copolycondensation and its characterization

From D,L ‐lactic acid and the natural functional molecule cholic acid (CA), the biodegradable material poly(D,L ‐lactide–cholate) was synthesized via direct copolycondensation. For the CA/lactic acid (LA) molar feed ratio of 1/64, the optimal synthesis conditions were as follows: a prepolymerization time of 8 h, 0.3 wt % SnO catalyst, and melt copolycondensation for 8 h at 160°C, which gave a novel star‐shaped poly(D,L ‐lactic acid) (PDLLA) modified by CA with the maximum weight‐average molecular weight of 5600 Da at a yield of 51.9%. The copolymer poly(D,L ‐lactide–cholate) at different molar feed ratios was characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, gel permeation chromatography, differential scanning calorimetry, thermogravimetry, and X‐ray diffraction. Decreasing the molar feed ratio of CA/LA from 1/15 to 1/128 reduced the average number of CA units embedded in the copolymer from 4 to 1. With 1/15 CA/LA, the copolymer was not a star‐shaped polymer, and its weight‐average molecular weight was the biggest (weight‐average molecular weight = 12,700 Da, weight‐average molecular weight/number‐average molecular weight = 1.68). With 1/32 CA/LA, the copolymer with two CA units was not a star‐shaped polymer either. With 1/64, 1/100, and 1/128 CA/LA, the copolymer mainly had one CA unit core embedded as a normal star‐shaped PDLLA with four arms, and certain crystallinity could be detected. The novel direct copolycondensation method was simple and practical for the synthesis of the asymmetrical star‐shaped PDLLA material, and it was advantageous for this PDLLA material embedded in the special bioactive molecule CA to be applied in the field of drug delivery and tissue engineering. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Syntheses of poly(lactic acid‐co‐glycolic acid) serial biodegradable polymer materials via direct melt polycondensation and their characterization

The optimal synthetic conditions of poly(lactic acid‐co‐glycolic acid) (PLGA) via melt copolycondensation directly from L ‐lactic acid (L ‐LA) and glycolic acid (GA) with a feed molar ratio of 50/50 are discussed; the important drug‐delivery carrier PLGA50/50 is used as a special example. With reaction conditions of 165°C and 70 Pa and with 0.5 wt % SnCl₂ as the catalyst, 10 h of polymerization gave the L ‐PLGA50/50 with the biggest intrinsic viscosity ([η]), 0.1993 dL/g. The optimal synthetic conditions were verified by the synthesis of D,L ‐PLGA50/50 with D,L ‐lactic acid (D,L ‐LA) instead of L ‐LA, but the biggest [η] was 0.2382 dL/g. Under the same synthetic conditions with L ‐LA and D,L ‐LA as starting materials, serial PLGA with different molar feed ratios, including 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100, were synthesized via simple and practical direct melt copolycondensation, and their solubilities were investigated. When the glycolic acid feed molar percentage was equal to or more than 70%, solubilities in tetrahydrofuran and CHCl₃ became worse, and some samples were even wholly insoluble. These biodegradable polymers were also systematically characterized with gel permeation chromatography, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, differential scanning calorimetry, and X‐ray diffraction. PLGA synthesized from L ‐LA and D,L ‐LA had many differences in weight‐average molecular weight (M_w), glass‐transition temperature, crystallinity, and composition. When the molar feed ratio of LA to GA was 50/50, both the [η] and M_w values of D,L ‐PLGA were higher than those of L ‐PLGA. With D,L ‐LA as the starting material, the structure of the PLGA copolymer was relatively simple, and its properties were apt to be controlled by its GA chain segment. When the feed molar percentage of the monomer (LA or GA) was more than or equal to 90%, the copolymer was apt to be crystalline, and the aptness was more obvious for the L ‐LA monomer. The composition percentage of GA in PLGA was not only higher than the feed molar percentage of GA, but also, the GA percentage in D,L ‐PLGA was higher than in L ‐PLGA. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 244–252, 2006     

Direct synthesis of poly(D,L‐lactic acid) by melt polycondensation and its application in drug delivery

Starting from D,L ‐acid and SnCl₂ as catalyst, poly(D,L ‐lactic acid) (PDLLA) was directly synthesized by melt polycondensation. Under the appropriate conditions such as 0.5 wt % SnCl₂, 170–180°C, 70 Pa, and 10 h, the viscosity‐average molecular weight (M_η) of PDLLA was 4100 Da. PDLLA produced by the most practical method was used as the drug‐delivery material for erythromycin and ciprofloxacin. The optimal conditions for the preparation of erythromycin–poly(D,L ‐lactic acid)–microsphere (ERY–PDLLA–MS) for lung targeting was investigated, and further confirmed by good reappearance tests. DSC and SEM demonstrated that ERY–PDLLA–MS had good spherical shape. The release in vitro of ERY–PDLLA–MS was effective and the half‐time (T_1/2) was 51.0 h. After 175 h, the accumulated release percentage was 80.0%. The test in vivo showed that ERY–PDLLA–MS was more easily distributed in rabbit lung tissue. When PDLLA was applied in an antibacterial ciprofloxacin drug‐delivery microsphere (CIP–PDLLA–MS), CIP–PDLLA–MS was also characterized with DSC and SEM, and the release T_1/2 in vitro was 24.9 h. After 53.2 h, the accumulated release percentage reached 84.0%, which indicated that CIP–PDLLA–MS was advantageous to long‐term release. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2143–2150, 2004     

Degradation of poly(D,L‐lactic acid)‐b‐poly(ethylene glycol) copolymer and poly(L‐lactic acid) by electron beam irradiation

This article investigated the effects of electron beam (EB) irradiation on poly(D ,L ‐lactic acid)‐b‐poly(ethylene glycol) copolymer (PLEG) and poly(L ‐lactic acid) (PLLA). The dominant effect of EB irradiation on both PLEG and PLLA was chain scission. With increasing dose, recombination reactions or partial crosslinking of PLEG can occur in addition to chain scission, but there was no obvious crosslinking for PLLA at doses below 200 kGy. The chain scission degree of irradiated PLEG and PLLA was calculated to be 0.213 and 0.403, respectively. The linear relationships were also established between the decrease in molecular weight with increasing dose. Elongation at break of the irradiated PLEG and PLLA decreased significantly, whereas the tensile strength and glass transition temperature of PLLA decreased much more significantly compared with PLEG. The presence of poly(ethylene glycol) (PEG) chain segment in PLEG was the key factor in its greater stability to EB irradiation compared with PLLA. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

High molecular weight poly (L‐lactic acid) clay nanocomposites via solid‐state polymerization

We propose here, a novel technique to synthesize high molecular weight (MW) poly (L ‐lactic acid)‐clay nanocomposite (PLACN), via solid state polymerization (SSP). We synthesize prepolymer of PLACN (pre‐PLACN) from both, L ‐lactic acid and L ‐lactide, as starting materials. Synthesis of pre‐PLACN from L ‐lactic acid is carried out via in situ melt polycondensation (MP) of L ‐lactic acid oligomer, followed by SSP, to achieve high MW PLACN (M_w ∼ 138,000 Da). In case of L ‐lactide as the starting material, we prepare L ‐lactide–clay intercalated mixture which yields moderate MW pre‐PLACN during subsequent ring opening polymerization (ROP). Interestingly, ROP is performed by using hydroxyl functionalized ternary catalyst system (L ‐lactide–Sn(II) octoate–oligo (L‐lactic acid) complex), which provides the terminal hydroxyl end‐groups, required for step‐growth SSP. Pre‐PLACN MW is now increased to M_w ∼ 127,000 Da, by the subsequent SSP process. ¹H NMR analyses confirm that these end‐groups, are indeed consumed during SSP. During SSP, the PLACN also achieves up to 90% crystallinity, which may be due to the synchronization of the slow step‐growth SSP of poly(L ‐lactic acid) (PLA) with the crystallization kinetics. Optical purity of PLACNs is similar to that of neat PLA, whereas the thermal stability of PLACNs is significantly superior. As evidenced by wide‐angle X‐ray scattering/small‐angle X‐ray scattering analyses and in line with the literature, both, intercalated and exfoliated PLACN morphologies, have been synthesized, by suitable selection of clays. We also verify the correlation between the PLA semicrystalline morphology and the PLACN morphology, which is consistent with those of PLACN synthesized by other techniques. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Relationship between the crystallization behavior of poly(ethylene glycol) and stereocomplex crystallization of poly(L‐lactic acid)/poly(D‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a good biomedical polymer material with wide applications. The addition of poly(ethylene glycol) (PEG) as a plasticizer and the formation of stereocomplex crystals (SCs) have been proved to be effective methods for improving the crystallization of PLLA, which will promote its heat resistance. In this work, the crystallization behavior of PEG and PLLA/poly(d ‐lactic acid) (PDLA) in PLLA/PDLA/PEG and PEG‐b‐PLLA/PEG‐b‐PDLA blends has been investigated using differential scanning calorimetry, polarized optical microscopy and X‐ray diffraction. Both SCs and homocrystals (HCs) were observed in blends with asymmetric mass ratio of PLLA/PDLA, while exclusively SCs were observed in blends with approximately equal mass ratio of PLLA/PDLA. The crystallization of PEG was only observed for the symmetric blends of PLLA_39k/PDLA_35k/PEG_2k, PLLA_39k/PDLA_35k/PEG_5k, PLLA_69k/PDLA_96k/PEG_5k and PEG‐b‐PLLA_31k/PEG‐b‐PDLA_27k, where the mass ratio of PLLA/PDLA was approximately 1/1. The results demonstrated that the formation of exclusively SCs would facilitate the crystallization of PEG, while the existence of both HCs and SCs could restrict the crystallization of PEG. The crystallization of PEG is related to the crystallinity of PLLA and PDLA, which will be promoted by the formation of SCs. © 2017 Society of Chemical Industry     

Formation of honeycomb films from poly(L‐lactide)‐block‐poly(ethylene glycol) via water‐droplet templating

The fabrication of honeycomb‐patterned films from amphiphilic poly(L ‐lactide)‐block‐poly(ethylene glycol) (PLEG) in a high‐humidity atmosphere is reported. The influence of the solution concentration on pattern formation was investigated. Moreover, by comparing the different conditions of fabricating regular structures between PLEG and poly(phenylene oxide), the mechanism of the regular pattern formation was studied. Finally, by adding sodium dodecylsulfate to a concentrated solution of 1 g L^?1 PLEG? CHCl₃ which otherwise could not form regular pores, we found that regular pores could be obtained. The PLEG honeycomb films are expected to be of use in cell culture, tissue engineering and many other areas. Copyright © 2007 Society of Chemical Industry     

Poly(para‐dioxanone)/poly(D,L‐lactide) blends compatibilized with poly(D,L‐lactide‐co‐para‐dioxanone)

The effect of poly(D ,L ‐lactide‐co‐para‐dioxanone) (PLADO) as the compatibilizer on the properties of the blend of poly(para‐dioxanone) (PPDO) and poly(D ,L ‐lactide) (PDLLA) has been investigated. The 80/20 PPDO/PDLLA blends containing from 1% to 10% of random copolymer PLADO were prepared by solution coprecipitation. The PLADO component played a very important role in determining morphology, thermal, mechanical, and hydrophilic properties of the blends. Addition of PLADO into the blends could enhance the compatibility between dispersed PDLLA phase and PPDO matrix; the boundary between the two phases became unclear and even the smallest holes were not detected. On the other hand, the position of the T_g was composition dependent; when 5% PLADO was added into blend, the T_g distance between PPDO and PDLLA was shortened. The blends with various contents of compatibilizer had better mechanical properties compared with simple PPDO/PDLLA binary polymer blend, and such characteristics further improved as adding 5% random copolymers. The maximum observed tensile strength was 29.05 MPa for the compatibilized PPDO/PDLLA blend with 5% PLADO, whereas tensile strength of the uncompatibilized PPDO/PDLLA blend was 14.03 MPa, which was the lowest tensile strength. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Nonisothermal crystallization behaviors of biodegradable double crystalline poly(butylene succinate)‐poly(ethylene glycol) multiblock copolymers

Nonisothermal crystallization behaviors of both poly(butylene succinate) (PBS) and poly(ethylene glycol) (PEG) segments within PBS‐PEG (PBSEG) multiblock copolymers were investigated by differential scanning calorimetry (DSC). The nonisothermal crystallization kinetics of both PBS and PEG segments were analyzed by Avrami, Ozawa, and Mo methods. The results showed that both of Avrami and Mo methods were successful to describe the nonisothermal crystallization kinetics of PBS and PEG segments. The results of crystallization kinetics indicated that the crystallization rate of PBS segment decreased with PBS segment content and/or L_PBS, while that of PEG segment decreased with M_n,PEG or F_PEG. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40940.     

Synthesis of novel biodegradable material poly(lactic acid-trimesic acid) via direct melt copolycondensation and its characterization

Directly starting from lactic acid (LA) and trimesic acid (TMA), novel biodegradable material poly(lactic acid-trimesic acid) (PLT), a modified polylactic acid (PLA) with terminal carboxyl, was synthesized via melt copolycondensation. The optimal synthetic conditions, including catalyst kinds and dosage, prepolymerization time, copolymerization temperature and time, were discussed. When L-lactic acid (L-LA) and TMA as molar feed ratio n(L-LA)/n(TMA) 120/1 was prepolymerized for 8 h at 140 °C, the copolycondensation catalyzed by 0.9 wt % SnCl₂ at 190 °C for 8 h gave PLT with the biggest intrinsic viscosity ([η]) 1.91 dL∙g⁻¹, and the corresponding weight-average molecular weight (M_w) was 14,100 Da. Serial L-PLTs at different molar feed ratios were synthesized and characterized with FTIR, ¹H NMR, GPC, DSC, and XRD. Increasing n(L-LA), M_w increased first, and the biggest M_w was 17500 Da at n(L-LA)/ n(TMA) 240/1, then decreased. Using D,L-lactic acid (D,L-LA) instead of L-LA, the influences of LA stereochemical configuration were investigated. The peak phenomenon of M_w was similar, but the biggest M_w was 23,100 Da at n(D,L-LA)/n(TMA) 320/1. The serial L-PLTs had a certain crystallinity (10.2%∼23.0%), while all D,L-PLTs were amorphous. These differences may be in touch with the reaction mechanism of direct melt copolycondensation. The method was simple and practical for the synthesis of PLA biomedical materials applied in drug delivery carrier, and vessel substitution material.     

Synthesis of biodegradable material poly(lactic acid-co-glycerol) via direct melt polycondensation and its reaction mechanism

To further verify the forming mechanism of multi-core structure during the direct melt copolycondensation of lactic acid (LA) with the compounds containing multifunctional groups, the biodegradable material poly(lactic acid-co-glycerol) [P(LA-co-GL)] was synthesized as designed using L-lactic acid (L-LA) and glycerol (GL) as the starting materials. For the molar feed ratio n(LA)/n(GL) of 60/1, the optimal synthetic conditions were discussed. Using 0.3 wt% stannous oxide (SnO) as the catalyst, after the prepolymerization was carried out at 140 °C for 8 h, the melt copolymerization for 8 h at 160 °C gave the polymer with the biggest intrinsic viscosity ([η]) 0.76 dL•g⁻¹. The copolymers P(LA-co-GL)s at different molar feed ratios were characterized by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (¹H-NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Increasing the molar feed ratio n(LA)/n(GL), the weight-average molecular weight (M_w) didn’t increase all the time, but a peak of M_w was formed, which indeed validated the above special phenomenon during the direct melt copolycondensation of LA with the monomers containing multifunctional groups. However, the forming mechanism of multi-core copolymer was different when multihydroxyl alcohol (e.g. GL) was used as the monomer containing multifunctional groups. Because the multi-core structure was linked by the ether bonds with less reversibility in the reaction, the biggest M_w of copolymers was relatively lower. For GL with three terminal hydroxyls as the core, only when n(LA)/n(GL) was more than 100/1, the star-shaped polylactic acid (SPLA) containing one core could be obtained.     

A comprehensive single‐particle model for solid‐state polymerization of poly(L‐lactic acid)

We propose here, a comprehensive model for the solid‐state polymerization (SSP) of a low to moderate molecular weight (MW) prepolymer of lactic acid, to produce high MW poly(L ‐lactic acid) (PLLA). The reactions are rationally assumed to occur only in the amorphous region, and effective concentrations of end groups, vary with crystalinity, X_c, during SSP. We estimate byproduct diffusivities, D, using free volume theory. The effects of various parameters on the SSP of PLLA prepolymer have been examined with respect to the optimum MW, X_c and D. We introduce self‐consistently, scaling factors of ～ 0.27, in the experimental procedure, to determine via ¹⁹F‐NMR, concentrations of the end groups, after converting them to fluorinated ester groups. The relevant reaction rate constants are obtained by fitting to early time data from representative SSP experiments at 150°C, under high vacuum, on PLLA prepolymer powder (i.e., spherical geometry) of number average MW, M_n0 ～ 10,200 Da, which attains M_n ～ 150,000 Da, via SSP. The subsequent successful comparison of the model predictions with experimental data throughout the entire SSP duration indicates that the model is comprehensive and accounts for all the relevant phenomena occurring during the SSP to synthesize high MW PLLA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Characterization and comparison of diblock and triblock amphiphilic copolymers of poly(δ‐valerolactone)

Three types of pegylated amphiphilic copolymers of poly(δ‐valerolactone) (PVL) were copolymerized with methoxy poly(ethylene glycol) (MePEG) and poly(ethylene glycol) (PEG₄₀₀₀ and PEG_10,000), respectively. Pegylation of PVL allowed copolymers possessing amphiphilic property and efficiently self‐assembled to form micelles with a low critical micelle concentration (CMC) in the range of 10^?7–10^?8M. The average molecular weight of copolymers was in the range of 10,000–20,000 Da, and the polydispersity of copolymers was about 1.7–1.8. Higher mobility of low molecular weight PEG (i.e., MePEG and PEG₄₀₀₀) than high molecular weight PEG_10,000 allowed valerolactone ring opening more efficient in terms of PVL/MePEG and PVL/PEG₄₀₀₀ copolymers possessing longer chain length in hydrophobic domain. Pegylated PVL with low CMC and triblock structure was preferred to encapsulate drug during micelle formation. Although all of these amphiphilic copolymers exhibited controlled release character, the micelles formed by triblock copolymer possessed a more stable core‐shell conformation than that by diblock copolymer, and resulted in the release of drug from triblock micelles slower than that from diblock micelles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1836–1841, 2006     

Design,synthesis, and characterization of a potential flame retardant poly(lactic acid‐co‐pyrimidine‐2,4,5,6‐tetramine) via direct melt polycondensation

Directly starting from d ,l ‐lactic acid (LA) and pyrimidine‐2,4,5,6‐tetramine (PTA), the copolymer P(LA‐co‐PTA) as a novel potential solid compatible polymeric flame retardant is synthesized as designed via melt polycondensation. When the molar feed ratio LA/PTA is 60/1, the optimal synthetic conditions are discussed. After the prepolymerization at 140°C for 8 h, using 0.5 wt % stannous oxide as the catalyst, the melt copolymerization at 160°C for 4 h gives the copolymer with the biggest intrinsic viscosity 0.88 dL g^?1. The structures and properties of P(LA‐co‐PTA)s at different molar feed ratios are characterized by FT‐IR, ¹H‐NMR, ¹³C‐NMR, GPC, XRD, DSC, and TGA. The decomposition temperatures of P(LA‐co‐PTA)s are higher than these of homopolymer poly(d,l ‐lactic acid) (PDLLA). All copolymers have higher char yield than PDLLA, and the more PTA in the feed content, the higher char yield. What's more, there are some residues at 700–800°C, indicating that P(LA‐co‐PTA)s have good charring ability. When the monomer PTA is introduced into polylactic acid by chemical bonding as purine (PU) unit formed during the condensation, both the PTA's relatively higher nitrogen content and the PU's similar structure with flame retardant benzimidazole are beneficial to improve the thermal stability and charring ability, especially the latter. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40275.     

Preparation of high‐molecular‐weight poly(L‐lactic acid)‐based polymers through direct condensation polymerization in bulk state

Poly(L ‐lactic acid‐co‐succinic acid‐co‐1,4‐butanediol) (PLASB) was synthesized by a direct condensation copolymerization of L ‐lactic acid, succinic acid (SA), and 1,4‐butanediol (BD) in bulk state using titanium(IV) butoxide (TNBT) as a catalyst. Weight average molecular weight (M_w) of PLASB increased from 3.5 × 10⁴ to 2.1 × 10⁵ as the content of SA and BD went up from 0.01 to 0.5 mol/100 mol of L ‐lactic acid (LA). PLASB having M_w in the range from 1.8 × 10⁵ to 2.1 × 10⁵ showed tensile properties comparable to those of commercially available poly(L ‐lactic acid) (PLLA). In sharp contrast, homopolymerization of LA in bulk state produced PLLA with M_w as low as 4.1 × 10⁴, and it was too brittle to prepare specimens for the tensile tests. M_w of PLASB synthesized by using titanium(IV)‐2‐ethyl(hexoxide), indium acetate, indium hydroxide, antimony acetate, antimony trioxide, dibutyl tin oxide, and stannous‐2‐ethyl 1‐hexanoate was compared with that of PLASB obtained by TNBT. Ethylene glycol oligomers with different chain length were added to LA/SA in place of BD to investigate effect of chain length of ethylene glycol oligomers on the M_w of the resulting copolymers. Biodegradability of PLASB was analyzed by using the modified Sturm test. Toxicity of PLASB was evaluated by counting viable cell number of mouse fibroblast cells that had been in contact with PLASB discs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 466–472, 2006     

Investigations on the morphology and melt crystallization of poly(L‐lactide)‐poly(ethylene glycol) diblock copolymers

Ring opening polymerization of L ‐lactide was realized in the presence of monomethoxy poly(ethylene glycol), using zinc lactate as catalyst. The resulting PLLA‐PEG diblock copolymers were characterized by using ¹H‐NMR, SEC, WAXD, and DSC. All the copolymers were semicrystalline, one or two melting peaks being detected depending on the composition. Equilibrium melting temperature (T_m⁰) of PLLA blocks was determined for three copolymers with different EO/LA molar ratios. T_m⁰ decreased with decreasing PLLA block length. A copolymer with equivalent PLLA and PEG block lengths was selected for melt crystallization studies and the resulting data were analyzed with Avrami equation. The obtained Avrami exponent is equal to 2.6 ± 0.2 in the crystallization temperature range from 80 to 100°C. In addition, the spherulite growth rate of PLLA‐PEG was analyzed by using Lauritzen‐Hoffmann theory in comparison with PLLA homopolymers. The nucleation constant was found to be 2.39 × 10⁵ K² and the free energy of folding equal to 53.8 erg/cm² in the range of 70–94°C, both higher than those of PLLA homopolymers, while the spherulite growth rate of the diblock copolymer was lower. POLYM. ENG. SCI., 2008. © 2007 Society of Plastics Engineers     

Porous poly(L‐lactic acid)/poly(ethylene glycol) blend films

Poly(L ‐lactic acid) (PLLA: M_w = 19.4 × 10⁴)/poly(ethylene glycol) (PEG: M_w = 400) blend films were formed by use of a solvent‐cast technique. The properties and structures of these blend films were investigated. The Young's modulus of the PLLA decreased from 1220 to 417 MPa with the addition of PEG 5 wt %, but the elongation at break increased from 19 to 126%. The melting point of PLLA linearly decreased with increases in the PEG content (i.e., pure PLLA: 172.5°C, PLLA/PEG = 60/40 wt %: 159.6°C). The PEG 20 wt % blend film had a porous structure. The pore diameter was 3–5 μm. The alkali hydrolysis rate of this blend film was accelerated due to its porous structure. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 965–970, 2004     

Influence of racemization on stereocomplex‐induced gelation of water‐soluble polylactide–poly(ethylene glycol) block copolymers

Ring‐opening polymerization of L ‐ or D ‐lactide was realized at 140 °C for a period of 7 days in the presence of dihydroxyl poly(ethylene glycol) (PEG), with M?_n = 4000 g mol^?1, using zinc lactate as initiator. The resulting poly(L ‐lactide)–PEG–poly(L ‐lactide) and poly(D ‐lactide)–PEG–poly(D ‐lactide) triblock copolymers are water soluble with polylactide (PLA) block length ranging from 11 to 17 units. Both the tube inverting method and rheological measurements were used to evaluate the gelation properties of aqueous solutions containing single copolymers or L /D copolymer pairs. Stereocomplexation between poly(L ‐lactide) and poly(D ‐lactide) blocks is observed for mixed solutions. Hydrogel formation is detected in the case of relatively long PLA blocks (DP _PLA = 17), but not for copolymers with shorter PLA blocks (DP _PLA = 11–13) due to partial racemization of L ‐lactyl units. Racemization is largely reduced when the reaction time is shortened to 1 day. Under these conditions, DP _PLA of 8 is sufficient for the stereocomplexation of PLA–PEG block copolymers, and DP _PLA above 10 leads to the formation of hydrogels of PLA–PEG block copolymers. On the other hand, racemization appears as a general phenomenon in the (co)polymerization of L ‐lactide with Zn(Lac)₂ as initiator, although it is negligible or undetectable in the case of high molar mass polymers. Therefore, racemization is the limiting factor for the stereocomplexation‐induced gelation of water‐soluble PLA–PEG block copolymers where the PLA block length generally ranges from 10 to 30. Reaction conditions including initiator, time and temperature should be strictly controlled to minimize racemization. Copyright © 2010 Society of Chemical Industry