Graft copolymerization of sodium acrylate onto organophilic montmorillonites initiated by potassium diperiodatonickelate (IV) and application of graft copolymer in water‐superabsorbent

The graft copolymerization of sodium acrylate (SA) onto organophilic montmorillonites (OMMT) initiated by redox reaction of potassium diperiodatonickelate (IV) [Ni(IV)] with reactive groups on OMMT substrate was studied in alkaline medium. The grafting parameters have been investigated as a function of the ratio of monomer to OMMT, the concentration of initiator, temperature, and pH value. The structure of the graft copolymer (OMMT‐g‐PSA) was systematically characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscope (SEM). It was found that [Ni(IV)] belongs to a highly efficient initiator for graft copolymerization of SA onto OMMT via the redox iniation (grafting efficiency > 95%). Furthermore, the experimental results also showed that the graft copolymer gels synthesized under optimal condition exhibited a maximum water absorbency of 1104 g/g in distilled water and 111 g/g in 0.2 wt % NaCl solution, respectively, and its water retention ability is more than 91% after centrifugal separation for 2 h. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatonickelate(IV)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) with a potassium diperiodatonickelate(IV) [Ni(IV)]–PVA redox system as an initiator was investigated in an alkaline medium. The grafting parameters were determined as functions of the temperature and the concentrations of the monomer and initiator. The structures of the graft copolymers were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The Ni(IV)–PVA system was found to be an efficient redox initiator for this graft copolymerization. A single‐electron‐transfer mechanism was proposed for the formation of radicals and the initiation. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate, n‐butyl acrylate, and n‐butyl methacrylate, were used as reductants for graft copolymerization. These reactions definitely occurred to some degree. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 529–534, 2003     

Graft copolymerization of methyl acrylate onto nylon1010 initiated by potassium diperiodatonickelate(IV)

In this article, the graft copolymerization of methyl acrylate (MA) onto nylon1010 by using potassium diperiodatonickelate(IV) [Ni(IV)]–nylon1010 redox system as initiator was studied in alkaline medium. The effect of different factors on grafting parameters was investigated. The structure of the graft copolymer was determined by infrared (IR), X-ray diffraction, and scanning electron microscope (SEM). It was found that Ni(IV)–nylon1010 system is an efficient redox initiator for this graft copolymerization. A single-electron transfer mechanism is proposed to explain the formation of radicals and the initiation. The graft copolymer was used as the compatibilizer in blends of poly(methyl methacrylate) (PMMA) and nylon1010. The SEM photographs indicate that the graft copolymer greatly improved the compatibility of the blend. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2636–2640, 2001     

Synthesis and characterization of biodegradable polyethylene by graft copolymerization of starch using glucose–Ce(IV) redox system

Graft copolymerization of low‐density polyethylene (LDPE) onto starch was carried out with glucose–cerium(IV) redox initiator in an aqueous sulfuric acid medium under nitrogen atmosphere. The graft yield was influenced by various parameters like reaction time, temperature, and concentrations of acid, glucose, polyethylene (PE), starch, and initiator. A maximum graft yield of 85.66% was obtained at a temperature of 50°C and at higher concentration of starch. Effect of grafting on crystallinity, morphology, and thermal properties of modified PE has been evaluated using X‐ray diffraction, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA/DTA). Biodegradability of starch‐grafted PE has been tested applying soil‐burial test. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3229–3239, 2006     

Graft copolymerization of vinyl monomers with modified cotton. II. Grafting of acrylonitrile and methyl methacrylate on acetylated cotton

Ce(IV)-induced polymerization of acrylonitrile and methyl methacrylate with acetylated cotton having different acetyl contents was investigated. The extent of interaction between the cotton and monomer is dependent upon the acetyl content of the former as well as on the reaction conditions. Increasing the acetyl content caused a significant decrease in the graft yield. Increasing the acrylonitrile concentration was accompanied by a substantial increase in the graft yields. The same effect was found with the initiator up to a certain concentration, but beyond it there was a reversal. The rate of grafting increased by rising the temperature and follow the order 60° > 40° > 30°C. The Ce(IV) consumption during grafting is greater than that consumed during oxidation. The consumption of Ce(IV) by the cellulosic materials was favorably influenced by the concentrations of monomer and initiator, time, and temperature. Rates of grafting and Ce(IV) consumption during oxidation of acetylated cottons having different acetyl contents strongly support the postulated mechanism of grafting using the Ce(IV)–cellulose redox system. Ce(IV) oxidation had practically no effect on the acetyl groups (expressed as per cent combined acetic acid) of the modified cotton.     

Ni(Ⅳ)引发丙烯酸甲酯与三元尼龙接枝共聚反应的研究

以二过碘酸合镍(Ⅳ)钾〔Ni(Ⅳ)〕为氧化剂,共聚尼龙上的弱的还原基团(酰胺基)为还原剂,组成氧化还原引发体系,于碱性介质中直接在共聚尼龙分子骨架上产生接枝点,引发丙烯酸甲酯(MA)的接枝共聚合反应,获得了较高的接枝效率(可达90%以上)。探讨了引发剂浓度、单体浓度、反应温度对接枝参数的影响,结果表明:当c〔Ni(Ⅳ)〕=8×10-4mol/L,c(MA)=1 5mol/L,θ=35℃时,接枝效率和接枝百分比可达到最高值。用红外光谱、X射线衍射、扫描电镜对接枝共聚物进行了表征,提出了建立在镍(Ⅳ)还原为镍(Ⅱ)的过程为两步单电子转移的基础之上的引发机理。将所得接枝共聚物用作尼龙/聚甲基丙烯酸甲酯体系的增容剂,通过扫描电镜分析表明:该共混体系的相容性得到一定程度的改善。     

Grafting of methyl methacrylate onto sodium alginate initiated by potassium ditelluratoargentate(III)

Sodium alginate (SA) was graft‐copolymerized with methyl methacrylate in an alkali aqueous solution with potassium ditelluratoargentate(III) (DTA) as the initiator. Graft copolymers with both a high grafting efficiency (>90%) and a high percentage of grafting were obtained, which indicated that the DTA–SA redox pair was an efficient initiator for this grafting. The grafting parameters, including total conversion, grafting efficiency, and percentage grafting, were evaluated comparatively. The dependence of these parameters on temperature and time, monomer concentration, initiator concentration, and SA backbone concentration was also investigated. The overall activation energy of this grafting was calculated as 37.50 kJ/mol. Proof of grafting was obtained from gravimetric analysis and IR spectra. A tentative mechanism involving a two‐step, single‐electron‐transfer process of DTA is proposed to explain the generation of radicals and the initiation of grafting. Some basic properties of the grafted copolymer were studied by instrumental analyses, including thermogravimetry, X‐ray diffraction, and scanning electron microscopy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1688–1694, 2005     

Synthesis and characterization of butyl acrylate graft sodium salt of partially carboxymethylated starch

Graft copolymers were synthesized by graft copolymerization of butyl acrylate (BA) onto sodium salt of partially carboxymethylated starch (Na‐PCMS). Ceric ammonium nitrate (CAN), a redox initiator, was used for initiation of graft copolymerization reaction. All the experiments were run with Na‐PCMS having degree of substitution, DS = 0.35. The grafting reaction was characterized by parameters such as % total conversion (%Ct), % grafting (%G), % grafting efficiency (%GE), and % add‐on. Graft copolymers were characterized by infrared spectral analysis and scanning electron microscopy. Variables affecting graft copolymerization reaction such as nitric acid concentration, reaction time, reaction temperature, and ceric ion concentration were investigated. The results revealed that 0.3M CAN as initiator, 0.3M HNO₃, with reaction time 4–4.5 h at 25–30°C were found as suitable parameters for maximum yield of graft copolymerization reaction. © 2006 Wiley Periodicals, Inc. JAppl Polym Sci 102: 3334–3340, 2006     

Hydrogen peroxide initiated grafting of acrylamide onto poly(ethylene terephthalate) fibers in benzyl alcohol

The grafting of acrylamide onto poly(ethylene terephthalate) fibers using hydrogen peroxide as the redox initiator was investigated. Benzyl alcohol was found to be the favorite medium for this grafting. Maximum graft yield (7.6%) was reached at 95°C; the graft yield decreased at higher temperatures, and finally grafting was inhibited at 120°C. The effect of monomer and initiator concentration on grafting was also studied. © 1996 John Wiley & Sons, Inc.     

Ce(IV)‐initiated graft polymerization of acrylic acid onto poly(ethylene terephthalate) fiber

Graft copolymerization of acrylic acid onto poly(ethylene terephthalate) (PET) fiber by a redox system using ceric (IV) initiator was studied with regard to various parameters of importance: acrylic acid concentration, ceric (IV) concentration, nitric acid concentration, reaction temperature, and reaction time. Based on the morphology of the PET fiber, it could be concluded that ceric (IV) in dilute nitric acid is a redox initiator for the surface graft copolymerization of the acrylic acid/PET system. The grafted PET fiber showed an increase in improved moisture regain to reach 900% at 39.5% graft yield. The dyeability with the basic dye and disperse dye significantly increased by 100 and 22%, respectively, as a result of the grafting onto PET fiber. Both tenacity and elongation gradually decreased by 51.2 and 28.9%, respectively, with increasing graft yield, which reduced the fiber service lifespan. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1952–1958, 2003     

Graft copolymerization of methyl acrylate onto chitosan initiated by potassium diperiodatoargentate (III)

A novel efficient redox system—potassium diperiodatoargentate [Ag(III)]‐chitosan—was employed to initiate the graft copolymerization of methyl acrylate (MA) onto chitosan in aqueous alkali solution. The effects of reaction variables such as monomer concentration, initiator concentration, reaction time, and temperature were investigated and the grafting conditions were optimized. The structures and the thermal stability of chitosan and chitosan‐g‐PMA were characterized by infrared spectroscopy (IR) and thermogravimetric analysis (TGA). The solubility of chitosan‐g‐PMA in some mixed solvent was tested. The graft copolymer was shown to be an effective compatibilizer in blends of poly(vinyl chloride) (PVC) and chitosan. Finally, a mechanism is proposed to explain the formation of radicals and the initiation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 799–804, 2006     

Graft copolymerization of methyl acrylate onto cellulose initiated by potassium ditelluratoargentate(III)

A novel redox system, potassium ditelluratoargentate(III) (DTA)–cellulose, was employed to initiate the graft copolymerization of methyl acrylate onto cellulose in alkali aqueous solution. Grafting parameters, such as total conversion, grafting efficiency and grafting yield, were evaluated comparatively. The dependence of these parameters on temperature, reaction time, initiator concentration and ratio of monomer to cellulose was also investigated. Graft copolymers with high grafting parameters were obtained, which indicated that the DTA–cellulose redox pair is an efficient initiator for cellulose grafting. The proof of grafting was obtained from gravimetric analysis and infrared spectra. A tentative mechanism involving a two‐step single‐electron‐transfer process of DTA is proposed to explain the generation of radicals and initiation. Thermogravimetry, X‐ray diffraction and scanning electron microscopy were also carried out to study the thermal stability, crystallinity and morphology of the grafted copolymers. Copyright © 2004 Society of Chemical Industry     

Kinetic study of the polymerization of ethyl acrylate in an aqueous nitric acid medium

A kinetic study of the aqueous polymerization of ethyl acrylate (EA) was carried out at 30°C in a dilute nitric acid medium with ammonium ceric nitrate (ACN)–n‐propanol (nPA) and ACN–ethanol as redox initiator systems. The ceric‐ion consumption was first‐order with respect to the ceric‐ion concentration with both initiator systems. The formation of complexes between Ce(IV) and reducing agents was observed. The orders with respect to the Ce(IV), reducing agents, and monomer were evaluated for aqueous polymerizations of EA initiated by Ce(IV)–nPA and Ce(IV)–ethanol redox initiator systems. The overall activation energy for the aqueous polymerization of EA was evaluated in the temperature region of 27–40°C with both initiator systems. A kinetic mechanism for the aqueous polymerization of EA initiated by redox initiator systems is presented. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 218–224, 2006     

Homogeneous and heterogeneous grafting of 4‐vinylpyridine onto chitosan

Modification of chitosan by grafting with 4‐vinylpyridine (VP) was carried out both in homogeneous and heterogeneous phases, using potassium persulfate (K₂S₂O₈) and sodium bisulfite (NaHSO₃) as redox initiators. The effect of monomer concentration, initiator concentration and redox ratio, time and temperature on the extent of grafting (G%), homopolymer formation, and the efficiency of grafting were studied. Values of grafting percentages up to 96% were reached in heterogeneous conditions and up to 130% in homogeneous conditions (in 5% acetic acid). The grafting was confirmed by FTIR and ¹H NMR spectroscopy. The grafted samples were characterized by scanning electron microscopy, X‐ray diffraction, and thermogravimetric analysis. The crystallinity of the used chitosan was not affected by grafting, it even increased slightly. Dye uptake of the grafted samples towards the different types of dyes (acidic and basic) was investigated and was found to improve profoundly over the native chitosan with a higher uptake for the acidic dye. The grafted samples showed an increased swelling in water, which increased further upon quaternization of the graft copolymers. The extent of swelling is higher in acidic and basic media more than in neutral pH. The grafted copolymers are soluble with difficulty in warm acetic acid solution. The quaternized graft copolymer was found to be soluble in water. The biological activity of the quaternized graft copolymers (G = 130 and 80%) was investigated and was found to have an inhibition effect on both the Azotobacter fungus and the bacterium Fusarium oxysporium. The effect on the micro organisms is proportional to the amount of VP in the graft copolymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3308–3317, 2006     

Pentavalent vanadium ion-induced grafting of methyl methacrylate onto cotton cellulose

Graft polymerization of methyl methacrylate (MMA) onto cotton cellulose using vanadium pentanitrate as initiator was studied under a variety of conditions. The graft yield increased with increasing initiator concentration up to 8 mmole/l. and then decreased upon further increase in initiator concentration. Increasing MMA concentration from 1 to 5% was accompanied by a significant increase in the degree of grafting. The latter was also affected by the kind and concentration of the acid incorporated in the polymerization medium. Based on graft yields, the efficiency of the acids follows the order H₂SO₄ > HNO₃ > HClO₄. Replacement of the acid with isopropyl alcohol was also examined. An isopropyl alcohol concentration of 10% constitutes the optimal concentration for grafting. Maximum graft yield depends upon the polymerization temperature; it follows the order 50°C ≥ 60°C > 40°C > 30°C > 70°C. Reaction mechanisms for grafting in the presence of acid as well as in the presence of isopropyl alcohol are proposed.     

Factorial experimental design for graft copolymerization of styrene and methyl methacrylate onto styrene–butadiene rubber

The graft copolymerization of styrene (ST) and methyl methacrylate (MMA) onto styrene–butadiene rubber (SBR) latex prepared by seeded emulsion polymerization has been studied under various reaction conditions using cumene hydroperoxide redox initiator. The mechanism of graft copolymerization has been investigated. The synthesized graft copolymers were purified and then characterized by proton nuclear magnetic resonance (¹H NMR) analysis. A 2 2 fractional factorial experimental design was applied to study the effects of the process variables such as the amount of initiator and emulsifier, the presence or absence of chain‐transfer agent, ST to MMA ratio, monomer to rubber ratio, and reaction temperature on the grafting efficiency. The analysis of the results from the design showed the sequence of the main effect on the observed response of the grafting of ST and MMA onto SBR and that the amount of chain‐transfer agent had a significant effect. Transmission electron microscopy was used to study the morphology of the graft copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2867–2874, 2006     

Microwave promoted synthesis of chitosan‐graft‐poly(acrylonitrile)

Using microwave (MW) irradiation, polyacrylonitrile was grafted onto chitosan with 170% grafting yield under homogeneous conditions in 1.5 min in the absence of any radical initiator or catalyst. Under similar conditions a maximum grafting of 105% could be achieved when the K₂S₂O₈/ascorbic acid redox system was used as radical initiator in a thermostatic water bath at 35 ± 2°C. The representative graft copolymer was characterized by Fourier transform infrared spectra, thermogravimetric analysis, and X‐ray diffraction measurement, taking chitosan as a reference. The effects of such reaction variables as monomer/chitosan concentration, MW power, and exposure time on the graft co polymerization were studied. A probable mechanism for grafting without the redox system under microwaves was proposed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 820–825, 2005     

Photograft copolymerization of methyl methacrylate on viscose fiber using titanium(III) chloride–potassium persulfate redox initiator in a limited aqueous system

The graft copolymerization of methyl methacrylate (MMA) onto viscose fibers were studied under photoactive conditions with visible light using titanium(III) chloride—potassium persulfate as redox initiator in a limited aqueous system. Polymerization carried out in the dark at 40 ± 1°C produced little graft copolymer whereas that in the presence of light at 40 ± 1°C produced significant grafting. Percent grafting, percent total conversion, and grafting efficiency (%) were studied by varying time, initiator concentration, monomer concentration, solvent composition, and pH of the medium. High percent grafting (～ 200%), high grafting efficiency (～ 98%), and percent total conversion (～ 47%) were obtained with little homopolymer formation. A suitable mechanism for grafting has been discussed and also the characterization of the grafted fibers were studied by Fourier transform infrared (FTIR) spectroscopy, thermogravimetry and scanning electron microscopy (SEM). © 1992 John Wiley & Sons, Inc.     

Study of methyl‐methacrylate‐viscose fiber graft copolymerization and the effect of grafting on thermal properties

The graft copolymerization of methyl‐methacrylate onto viscose fibers was studied under photoactive conditions with visible light using Ce⁴⁺/Ti³⁺ combination as redox initiator in a limited aqueous medium. Polymerization conducted in the presence of light at 30 ± 1°C produced significant grafting, compared with that conducted in the dark under the same conditions. The % grafting, % total conversion, and % grafting efficiency were studied by varying time, monomer concentration, initiator concentration, and pH of the medium. The mechanism of polymerization and graft copolymer formation have been discussed. Characterization of the grafted fibers was done by Fourier transform infrared spectroscopy and scanning electron microscopy. The effect of % grafting on thermal properties was studied by thermogravimetric analysis. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 135–140, 1999     

Surface modification of nylon membrane by glycidyl methacrylate graft copolymerization for antibody immobilization

Surface of nylon membrane was modified by the graft copolymerization of glycidyl methacrylate (GMA) using persulfate and thiosulfate as redox initiator system. Effect of various reaction parameters such as initiator concentration, monomer concentration, polymerization time, and temperature on degree of grafting was also studied. Maximum grafting of 100% was achieved by using equimolar concentration (0.008M) of redox initiator and 0.5M of GMA monomer at 70°C in 60 min. Grafted nylon membranes with various graft levels of GMA were characterized by various techniques such as fourier transform infrared spectroscopy, thermo gravimetric analysis, and scanning electron microscopy. The GMA grafted nylon (NyM‐g‐GMA) membranes with different graft levels were evaluated as a support for immobilization of rabbit anti goat antibody (RAG IgG). Antibody (Ab) immobilized NyM‐g‐GMA membranes were evaluated using ELISA and Bradford protein estimation method. Nylon membrane with 60% graft level showed optimum immobilization of Ab at RAG IgG conc. of 0.625 μg/mL with low nonspecific binding. Maximum immobilization efficiency (I.E.%) of 56% was observed for membrane with 60% graft level at 50 μg/mL of RAG IgG in PBS (pH 7.4). Ab immobilized NyM‐g‐GMA discs were found to be stable up to 6 weeks at 4°C and 2 days at 37°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010