Synthesis and characterization of hyperbranched poly(silyl ester)s

Hyperbranched poly(silyl ester)s were synthesized via the A₂ + B₄ route by the polycondensation reaction. The solid poly(silyl ester) was obtained by the reaction of di‐tert‐butyl adipate and 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The oligomers with tert‐butyl terminal groups were obtained via the A₂ + B₂ route by the reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyl‐trisi1oxane with excess amount of di‐tert‐butyl adipate. The viscous fluid and soft solid poly(silyl ester)s were obtained by the reaction of the oligomers as big monomers with 1,3‐tetramethyl‐1,3‐bis‐β(methyl‐dicholorosilyl)ethyl disiloxane. The polymers were characterized by ¹H NMR, IR, and UV spectroscopies, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The ¹H NMR and IR analysis proved the existence of the branched structures in the polymers. The glass transition temperatures (T_g's) of the viscous fluid and soft solid polymers were below room temperature. The T_g of the solid poly(silyl ester) was not found below room temperature but a temperature for the transition in the liquid crystalline phase was found at 42°C. Thermal decomposition of the soft solid and solid poly(silyl ester)s started at about 130°C and for the others it started at about 200°C. The obtained hyperbranched polymers did not decompose completely at 700°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3430–3436, 2006     

Crosslinking of poly(silyl ester)s containing fumaryloxyl units in the main chain and characteristics of the crosslinked products

Two unsaturated poly(silyl ester)s that contained innoxious fumaryloxyl units in the main chain were prepared by the polycondensation reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyltrisiloxane or 1,3‐dichlorotetramethyldisiloxane with di‐tert‐butyl fumarate under nitrogen at 100°C for 1–3 days. To investigate the crosslinking reaction of the unsaturated poly(silyl ester)s, the two unsaturated poly(silyl ester)s were crosslinked in the presence of 2,2′‐azobisisobutyronitrile as a radical initiator. After the crosslinking, the unsaturated poly(silyl ester)s, which were viscous liquids, turned into solid products. The characterization of the two poly(silyl ester)s and the crosslinked products included infrared spectroscopy, ¹H‐NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Comparisons were made between the linear poly(silyl ester)s and the crosslinked poly(silyl ester)s. After the crosslinking, the important resonance signal for ethenylene (C?C) disappeared, and this showed that the crosslinking reaction was carried out progressively. The glass‐transition temperatures of the crosslinked poly(silyl ester)s were higher than those of the uncross‐ linked poly(silyl ester)s, and the thermal stability of the crosslinked poly(silyl ester)s was better than that of uncrosslinked poly(silyl ester)s. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1221–1225, 2007     

Preparation and characterization of poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones

The two poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones have been prepared via polycondensation reaction of di‐tert‐butyl adipate and di‐tert‐butyl fumarate with 2,2‐bis(p‐chloro dimethylsiloxy‐phenyl)propane to give tert‐butyl chloride as the condensate. The polymerizations were performed under nitrogen at 110°C for 24 h without addition of solvents and catalysts to obtain the poly(silyl ester)s with weight average molecular weights typically ranging from 5000 to 10,000 g/mol. Characterization of the poly(silyl ester)s included ¹H NMR and ¹³C NMR spectroscopies, infrared spectroscopy, ultraviolet spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), gel permeation chromatography, and Ubbelohde viscometer. The glass transition temperatures (T_g) of the obtained polymers were above zero because of the introducing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones. The TGA/DTG results showed that the obtained poly(silyl ester)s were stable up to 180°C and the residual weight percent at 800°C were 18 and 9%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1937–1942, 2006     

Synthesis and biodegradability evaluation of 2‐methylene‐1,3‐dioxepane and styrene copolymers

Biodegradable copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and styrene (ST) were synthesized by free‐radical copolymerization using di‐t‐butyl peroxide (DTBP) as the initiator. The copolymers containing ester units were characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR spectroscopy. Their molecular weight and polydispersity index were determined by gel permeation chromatography (GPC). In vitro enzymatic degradation of poly(MDO‐co‐ST) was performed at 37°C in phosphate buffer solution (PBS, pH = 7.4) in the presence of Pseudomonas lipase or crude enzyme extracted from earthworm. The experiment showed that incorporating ester units into C? C backbone chain of polystyrene would result in a biodegradable copolymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1146–1151, 2007     

2,3‐Dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ)/tert‐Butyl Nitrite/Oxygen: A Versatile Catalytic Oxidation System

A new catalytic oxidation system using catalytic amounts of 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) and tert‐butyl nitrite with molecular oxygen serving as the environmentally benign, terminal oxidant has been developed. This aerobic catalytic system was established for the selective oxidation of non‐sterically hindered benzylic alcohols and electron‐rich benzyl methyl ethers, and successfully extended to an application in the oxidative deprotection of PMB ethers to the alcohols in high selectivity.     

Synthesis and characterization of new polyamides containing p‐phenylenediacryloyl moieties in the main chain

Six new polyamides 8a–f containing p‐phenylenediacryloyl moieties in the main chain were prepared by the direct polycondensation reaction of bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 with 1,4‐diphenylene diamine 7a , 1,3‐diamino toluene 7b , 1,5‐diamino naphthalene 7c , 4,4′‐diamino diphenyl ether 7d , 4,4′‐diamino diphenyl sulfone 7e , and 3,3′‐diamino diphenylsulfone 7f by using thionyl chloride, N‐methyl‐2‐pyrolidone, and pyridine as condensing agents. These new polymers 8a–f were obtained in high yield and inherent viscosity between 0.35–0.65 dL/g. The resulting polyamides were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test, FTIR and UV–vis spectroscopy. Diacid acid 6 as a new monomer containing p‐phenylenediacryloyl moiety was synthesized by using a three‐step reaction. First, p‐phenylenediacrylic acid 3 was prepared by reaction of terephthal aldehyde 1 with malonic acid 2 in the presence of pyridine, then diacid 3 was converted to p‐phenylenediacryloyl chloride 4 by reaction with thionyl chloride. Finally, bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 was prepared by the condensation reaction of phenylenediacryloyl chloride 4 with p‐aminobenzoic acid 5 . © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of novel optically active poly(ester‐imide)s with benzophenone linkages by microwave‐assisted polycondensation

A new simple and rapid polycondensation reaction of 4,4′‐carbonyl‐bis(phthaloyl‐L ‐alanine)diacid chloride [N,N ′‐(4,4′‐carbonyldiphthaloyl)]bisalanine diacid chloride with several diphenols, such as bisphenol‐A, phenolphthalein, 1,8‐dihydroxyanthraquinone, 4,4′‐dihydroxybiphenyl, 1,5‐dihydroxynaphthalene and hydroquinone, in the presence of a small amount of a polar organic medium such as o‐cresol was performed using a domestic microwave oven. The polycondensation reaction proceeded rapidly and was almost complete within 12 min to give a series of poly(ester‐imide)s with inherent viscosities of about 0.35–0.58 dl g⁻¹. The resulting poly(ester‐imide)s were obtained in high yield and are optically active and thermally stable. All the above compounds have been fully characterized by IR spectroscopy, elemental analysis, inherent viscosity (η_inh), solubility test and specific rotation. Thermal properties of the poly(ester‐imide)s have been investigated using thermal gravimetric analysis (TGA). © 2000 Society of Chemical Industry     

Synthesis of 1‐Amino‐3‐(trimethylsilyl)allenes by Organocuprate Addition to 3‐(Trimethylsilyl)propyne Iminium Salts

1‐Dialkylamino‐3‐(trimethylsilyl)allenes 2a—q were obtained by conjugate addition of alkyl, vinyl, aryl, hetaryl, and silyl groups, via the respective organocuprates, to 3‐(trimethylsilyl)propyne iminium triflates 1a—d . Similarly, 2‐vinylidene‐2,3‐dihydro‐1,3‐benzothiazoles 4a,b were synthesized from semicyclic propyne iminium triflates 3a,b and a di‐tert‐butyl cuprate.     

Thermal and Mechanical Properties of Poly(arylene ether ketone)s Based on 5‐tert‐Butyl‐1,3‐bis(4‐fluorobenzoyl)benzene

An aromatic bishalide, 5‐tert‐butyl‐1,3‐bis(4‐fluorobenzoyl)benzene ( 2 ) was synthesized in high yield and purity by the reaction of 5‐tert‐butylisophthaloyl chloride ( 1 ) and fluorobenzene and polymerized by nucleophilic substitution reaction with commercially available aromatic bisphenols to prepare a series of high molecular weight poly(arylene ether ketone)s containing pendant tertiary butyl groups. The effect of molecular structure on the physical, thermal, mechanical and adhesion properties of the polymers was investigated.     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)– poly(dimethylsiloxane) block copolymers

The hydrolytic condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane under neutral conditions produced α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane (polymerization degree ≈ 4). The homofunctional condensation of α'ω‐dihydroxy‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane in a toluene solution and in the presence of activated carbon was performed, and dihydroxy‐containing oligomers with various degrees of condensation were obtained. Through the heterofunctional condensation of dihydroxy‐containing oligomers with α'ω‐dichlorodimethylsiloxanes in the presence of amines, corresponding block copolymers were obtained. Gel permeation chromatography, differential scanning calorimetry, thermomechanical analysis, thermogravimetry, and wide‐angle roentgenography investigations were carried out. Differential scanning calorimetry and roentgenography studies of the block copolymers showed that their properties were determined by the ratio of the lengths of the flexible and linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane) fragments in the macromolecular chain. At definite values of the lengths of the flexible and rigid fragments, a microheterogeneous structure was observed in the synthesized block copolymers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1409–1417, 2002; DOI 10.1002/app.10335     

Synthesis and micellization behavior of amphiphilic graft copolymer with 1‐octene as hydrophobic moiety

Two new kinds of amphiphilic copolymers were synthesized in this work. Poly(1‐octene‐co‐acrylic acid) copolymers were prepared through the copolymerization of 1‐octene and tert‐butyl acrylate, and the hydrolysis of tert‐butyl acrylate units. Poly(1‐octene‐co‐acrylic acid)‐g‐poly (ethylene glycol) copolymers were obtained from the esterification reaction between poly(1‐octene‐co‐acrylic acid) and poly(ethylene glycol) monomethyl ether. They were characterized by means of ¹H‐NMR, ¹³C‐NMR, GPC, and FTIR. These amphiphilic copolymers can form stable micelles in aqueous solutions. The critical micelle concentration was determined by fluorescence spectroscopy. The micellar morphology and size distribution were investigated by transmission electron microscopy and dynamic light scattering. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis functional poly(carbonate‐b‐ester) copolymers and micellar characterizations

Functional poly(carbonate‐b‐ester)s were synthesized in buck by ring‐opening polymerization of the carbonate (TMC, MBC, or BMC) with tert‐butyl N‐(2‐hydroxyethyl) carbamate as an initiator, and then with ε‐CL (or ε‐BCL) comonomer. Subsequently, the PMMC‐b‐PCL with pendent carboxyl groups and the PTMC‐b‐PHCL with pendent hydroxyl groups were obtained by catalytic debenzylation. DSC analysis indicated that only one T_g at an intermediate temperature the T_gs of the two polymer blocks. A decrease T_g was observed when an increase contents of ε‐CL incorporated into the copolymers. In contrast, two increased T_ms were observed with increasing PCL content. The block copolymers formed micelle in aqueous phase with critical micelle concentrations (cmcs) in the range of 2.23–14.6 mg/L and with the mean hydrodynamic diameters in the range of 100–280 nm, depending on the composition of copolymers. The drug entrapment efficiency and hydrolytic degradation behavior of micelle were also evaluated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Well‐defined polymers containing 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane moiety: Synthesis,mechanism, and applications in catalysis

A series of well‐defined different chain lengths polymers, which contain the organometallic 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane core in the main chain, was obtained in one‐pot via a novel 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane (complex A )/azobisisobutyronitrile (AIBN) initiating system used in reverse atom transfer radical polymerization of styrene in different concentrations. The introduction of organotin complex A was supported by ¹H‐NMR, ¹³C–NMR, and the Inductive Coupled Plasma Emission Spectrometer analysis of the organotin‐containing polymer. Moreover, the mechanism of polymerization was investigated by changing the ratio of complex A to AIBN. It was concluded that the complex A not only acted as an important part of the initiator system but also introduced the functional organometallic group into the polymer chain. Additionally, the organotin‐containing polymer could be used as catalyst for esterification, and the reaction products' conversion could reach high up to 99% and does not decrease after four successive cycles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane‐poly(dimethylsiloxane) block copolymers

The heterofunctional condensation of 1,3‐dichloro‐1,3‐disila‐1,3‐diphenyl‐2‐oxaindane with dihydroxydiphenylsilane at various ratios of initial compounds in the presence of amines was carried out, and α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with various degrees of condensation were obtained. Corresponding block copolymers were obtained by heterofunctional polycondensation of synthesized α,ω‐dihydroxy(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane oligomers with α,ω‐dichlorodimethylsiloxanes in the presence of amines. Thermogravimetry, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray analysis were carried out on the synthesized block coplymers. Differential scanning calorimetry and wide‐angle X‐ray studies of these copolymers showed that their properties were determined by the ratio of the lengths of the flexible linear poly(dimethylsiloxane) and rigid poly(1,3‐disila‐1,3‐diphenyl‐2‐oxaindane)‐diphenylsiloxane fragments in the main macromolecular chain. Two‐phase systems were obtained with specific flexible and rigid fragment length values in synthesized block copolymers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3462–3467, 2006     

Water‐dispersible porous polyisoprene‐block‐poly(acrylic acid) microspheres

Two polyisoprene‐block‐poly(tert‐butyl acrylate) (PI‐b‐PtBA) samples and a poly(tert‐butyl acrylate) (PtBA) homopolymer (hPtBA) were prepared by anionic polymerization and characterized by light scattering, size exclusion chromatography, and NMR. The tert‐butyl groups were removed from one of the diblocks to yield amphiphilic polyisoprene‐block‐poly(acrylic acid) (PI‐b‐PAA). PI‐b‐PAA was then used as the surfactant to disperse dichloromethane containing PI‐b‐PtBA and hPtBA at different weight ratios as oil droplets in water. Solid microspheres containing segregated polyisoprene (PI) and PtBA/hPtBA domains were obtained after dichloromethane evaporation. Permanent microspheres were obtained after PI domain crosslinking with sulfur monochloride. Porous microspheres were produced after the hydrolysis of PtBA and the extraction of the homopoly(acrylic acid) chains. The shape and connectivity of the poly(acrylic acid)‐lined pores were tuned by changes in the PtBA/hPtBA content in the precursor microspheres. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2785–2793, 2003     

Redox‐Switchable Phase Tags – Facile Mitsunobu Reactions using Ferrocenyl‐Tagged Triphenylphosphine

The use of redox‐switched phase tags in ferrocenyl‐substituted triphenylphosphine combined with DBAD (di‐tert‐butyl azodicarboxylate) allows high yield (>90 %) Mitsunobu transformations without the need for the chromatographic purification of the products. The redox‐switchable phosphine can be easily synthesized in two steps from 4‐bromoaniline, ferrocene and chlorodiphenylphosphine. It is separated from the reaction mixture by oxidation with iron(III) chloride and can be recycled efficiently by reductive treatment.     

Cashew nut shell liquid based t‐BOC protected alternating “high ortho” copolymer as a possible e‐beam resist: Characterization using multi‐dimensional NMR spectroscopy

A cardanol/m‐cresol‐based copolymer was esterified using di‐tert‐butyl dicarbonate (t‐BOC), which makes it a suitable candidate as a possible e‐beam resists. This work reports a full characterization of the product using the techniques of FTIR and UV–Visible spectroscopy, one dimensional ¹H NMR, ¹³C NMR, DEPT‐135. Two dimensional NMR experiments such as, COSY, HSQC, and HMBC have been employed for exhaustive probing of the microstructural details of this derivatized copolymer. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Palladium‐Catalyzed,Highly Efficient,Regiocontrolled Arylation of Electron‐Rich Allylamines with Aryl Halides

The highly efficient and regioselective palladium‐catalyzed Heck coupling of aryl bromides with electron‐rich allylamine derivatives is described. It was found that the choice of solvent, olefin, ligand and additive had a fundamental influence on the regioselectivity and reactivity of the reaction. The combination of palladium acetate [Pd(OAc)₂] and 1,3‐bis(diphenylphosphino)propane (dppp) in ethylene glycol (EG) constitutes a highly effective catalyst system for internal arylation of N‐Boc‐allylamine (tert‐butyl methyl allyliminodicarbonate) with aryl bromides to give good to excellent regioselectivities, while the catalyst system consisting of Pd(OAc)₂, tetrabutylammonium bromide (TBAB) and 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) additive allows for a variety of aryl bromides to react efficiently with N,N‐(Boc)₂‐allylamine (di‐tert‐butyl allyliminodicarbonate) in water to exclusively afford the linear (E)‐allylamine products in high yields.     

Iron‐Catalyzed Amidation of Aldehydes with N‐Chloroamines

A new direct conversion of aldehydes to amides has been realized, in the presence of iron(III) chloride as a catalyst and using tert‐butyl hydroperoxide (TBHP) as an oxidant. Both aliphatic and aromatic aldehydes were successfully reacted with variously mono‐ and di‐substituted N‐chloroamines. The methodology has a wide substrate scope, uses cheap and easily available reagents and is characterized by short reaction times.     

Controlled and stereospecific polymerization of rac‐lactide with a single‐site ethyl aluminum and alcohol initiating system

A single‐site ethyl aluminum complex, [2,2‐ diethyl‐1,3‐propylenebis(3,5‐di‐tert‐butyl‐salicylideneiminato)] ethyl aluminum (2), with a geminal diethyl substitutent on the diamino bridge was synthesized by the reaction of AlEt₃ with 1 equiv of N,N′‐(2,2‐diethyl‐1,3‐propylene)bis(3,5‐di‐tert‐butylsalicylideneimine). X‐ray diffraction showed that complex 2 contained a five‐coordinate aluminum atom with a distorted trigonal bipyramidal geometry in the solid state. ¹H‐NMR and ¹³C‐NMR spectra indicated that the two conformational enantiomers of 2 tautomerized quickly on the NMR timescale in solution. In the presence of isopropyl alcohol, the ring‐opening polymerization (ROP) of rac‐lactide with complex 2 produced a crystalline stereoblock polylactide (PLA). The stereoblocks contained an average of 12 units (L? = 12) of enantiomerically pure lactic acid. There was a linear relationship between the monomer conversion and number‐average molecular weights of the polymer. An induction period was observed for the polymerization. The induction period increased with decreasing concentration of catalyst 2 and isopropyl alcohol. In the presence of poly(ethylene glycol) (PEG), a PLA/PEG/PLA stereocomplex was prepared directly by the ROP of rac‐lactide with complex 2, which was confirmed by NMR, gel permeation chromatography, wide‐angle X‐ray diffraction, and differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 102–108, 2005