水性双组分聚氨酯涂料

介绍了水性双组分聚氨酯涂料的制备、性能及其应用领域。指出,它是综合性能较好的一类涂料,具有开发价值。     

电热涂料的研制与应用

研制了性能稳定的电热涂料，并列举了该涂料的性能指标。讨论了基料树脂、导电材料、固化温度、固化时间和涂层厚度对涂料性能的影响c以电暖器为例，介绍厂电热涂料作为发热元件的应用实例。     

硅丙乳胶涂料

研制成硅丙乳胶涂料。介绍了硅丙乳液的合成方法和制漆工艺。比较了硅丙乳胶涂料、苯丙乳胶涂料和纯丙乳胶涂料的性能。讨论了乳化剂、缓冲剂、有机硅种类对硅丙乳液性能的影响。     

B60—2乳胶防火涂料

研制了既能防火阻燃、又具有装饰效果的新型丙烯酸乳胶膨胀型防火涂料。介绍了该涂料的阻燃体系和配方,并列举了它的防火阻燃性能和其他性能。试验结果表明,该涂料的防火性能各项指标均达到一级,其他性能也较理想,是第二代乳胶防火涂料。     

水性仿瓷涂料的研制

采用价廉的水性脲醛树脂与苯丙乳液共混，制得水性仿瓷涂料，具有釉面瓷砖的装饰和防护效果，其性能达到溶剂型仿瓷涂料的要求。介绍了该涂料的配方和配制工艺。讨论了脲醛树脂用量和酸固化催化剂对涂膜性能的影响。     

纳米陶瓷涂料为工业涂料业注入新活力

工业的发展,人们生活水平的提高,功能单一的传统涂料已不能满足当今社会的需要。开发具有多种性能的新型涂料,已成为涂料工业研究的新热点。而将纳米技术用于涂料中,可使其获得多种特殊性能,如提高涂料的耐老化性、耐腐蚀性、抗辐射性,还可以进一步提高涂料的附着力、耐冲击性、柔韧性等。志盛威华陶瓷节能涂料专家指出,纳米涂料还呈现出一些特殊功能如自清洁、抗静电、吸波隐身等性能。纳米材料的广泛应用为涂料工业的发展提供了新的机遇。     

固体建筑涂料

研制的固体建筑涂料优于一般液体建筑涂料。本文介绍了经正交试验确定的涂料最佳配方,并列举了该涂料与专利涂料的性能比较结果。讨论了涂料所用的诸种原料作用。     

乳香在涂料中的应用

分析了乳香树脂的结构和性能,通过其在环氧涂料、无机富锌涂料和丙烯酸涂料的应用研究,发现乳香树脂能够提高涂料的机械性能和耐腐蚀性能。     

新型功能性涂料的研究进展

介绍了一些新型功能性涂料,如,耐指纹涂料、红外辐射节能涂料、防雾涂料、可剥离涂料、降解甲醛涂料等。并对这些涂料的制备和性能进行了综述。     

聚氨酯透明防火涂料

研究了聚氨酯透明膨胀型防火涂料的配方及性能,探讨了发泡剂,脱水成炭催化剂,成炭剂三者的配比及用量对防火涂料性能的影响。     

埋地钢管外防腐复合涂层的生产工艺

介绍了三层聚丙烯外防腐,描述了其施工工艺和涂覆技术;在炎热地带或输送介质温度较高时,三层聚丙烯外防腐是理想的首选涂层体系,具有较广泛的应用前景。     

锌-镍合金镀层耐蚀机理研究进展

锌 镍合金镀层的高耐蚀性引人注目 ,为获得合格镀层首先应了解其耐蚀机理。本文总结了锌 镍合金镀层耐蚀机理研究成果 ,分别从量子化学、热力学和动力学角度进行了归纳。     

几种新型富锌涂料的研究进展

介绍了氧化石墨烯改性水性环氧富锌涂料、石墨烯纳米片/环氧富锌(Gnps/ZRE)复合涂料、高柔韧性、高附着力水性无机富锌涂料、石墨烯硅酸盐富锌防腐蚀涂料、水性聚苯胺/氧化石墨烯改性低锌粉含量防腐涂料、还原-氧化石墨烯(r-GO)改性环氧富锌涂料、耐盐雾双组分水性环氧富锌涂料、石墨烯浆料改性水性环氧富锌涂料、双电层水性无机富锌涂料、SnCl2/EtOH溶液法还原氧化石墨烯环氧富锌涂料、有机-无机杂化水性富锌涂料、水性富锌铝涂料、低锌含量石墨烯长效防腐涂料、自固化醇溶性无机富锌底漆和冷镀锌喷漆等几种新型富锌涂料的研究进展。     

磷酸锌中重金属对双组分聚氨酯防腐涂料性能的影响

以不同重金属含量的磷酸锌为原料制备双组分聚氨酯防腐涂料,运用傅里叶变换红外光谱仪（FTIR）研究了重金属对双组分聚氨酯防腐涂料固化速率的影响,利用盐雾性能研究了重金属含量对双组分聚氨酯涂料防腐性能的影响。结果表明,磷酸锌中的重金属含量越高,其制备的聚氨酯涂料固化速度越快,耐盐雾性能越差,耐冲击性能越差。     

中国工业防腐涂料的现状及跨世纪发展战略

概述了工业防腐涂料的范畴,中国工业防腐涂料的现状及与工业化国家的差距,提出跨世纪工业防腐涂料的发展战略和主要的发展方向     

锌加涂膜镀锌特长效钢结构防腐涂料体系的应用研究

锌加涂膜镀锌防腐涂料体系是一种新型、长效、环保、便捷的钢结构防腐涂料体系,其底层采用锌加涂膜镀锌,面层采用高性能面漆。该防腐涂料体系具有防腐性能优异、施工简便、灵活等特点,已广泛用于钢结构工程的各领域,防腐保护年限达30～50年。     

我国重防腐涂料发展特点的分析

分析了我国重防腐涂料的发展特点,以及重防腐涂料的涂装技术进展。     

Anticorrosive properties of an epoxy-Meldrum acid cured system catalyzed by erbium III trifluromethanesulfonate

New low curing temperature powder epoxy coatings cured with Meldrum's acid and catalyzed by the use of erbium III trifluoromethanesulfonate have been formulated. Their curing kinetics and anticorrosive properties have been studied and compared with a system commonly used in industry (o-tolylbiguanide/epoxy resin) and with an epoxy powder coating homopolymerized by erbium III trifluoromethanesulfonate. Three different tests of anticorrosive properties (EIS, AC/DC/AC and salt fog spray) have been used together with an adherence test, in order to establish the best system. Results show that systems crosslinked with Meldrum's acid and catalyzed with erbium triflate present very fast curing kinetics and very good anticorrosive properties. The technique AC/DC/AC has shown its ability to evaluate properly and much faster than other techniques the anticorrosive properties of powder coatings.     

Development of polyorganosilazane–silicone marine coatings

The objective of the present work is the development and characterization of marine coatings based on polyorganosilazanes (PSZ). Two types of coatings containing silicone oils and biocidal compounds were investigated as anticorrosive and antifouling coatings. The flexibility, hydrophobicity and adhesion properties of the PSZ-based coatings on aluminum substrates were studied. Static immersions in natural seawater were investigated to evaluate the antifouling performances of these coatings. The corrosion properties were studied by salt spray tests. Results demonstrated that coatings based on silicone oils appeared to be the most efficient coatings in terms of antifouling and anticorrosive properties. Ten-month antifouling efficiency was revealed for biocide-free polydimethylsiloxane-based PSZ coatings in natural seawater static immersion. The adjunction of dicopper oxide as biocidal pigments was shown to decrease the stability in cans of the corresponding paints and therefore decreasing the flexibility of coatings. In addition, this pigment affected badly the anticorrosive properties of the coatings together with a short antifouling efficiency time. Thus, the silicone oil-based PSZ displayed remarkable advantages in addition to their dual antifouling and anticorrosive properties which are the absence of biocidal compounds released in marine environment and the absence of volatile solvent.