Influence of preparation method on structural and magnetic properties of nickel ferrite nanoparticles

Nickel ferrite nanoparticles of very small size were prepared by sol-gel combustion and co-precipitation techniques. At the same annealing temperature sol-gel derived particles had bigger crystallite size. In both methods, crystallite size of the particles increased with annealing temperature. Sol-gel derived nickel ferrite particles were found to be of almost spherical shape and moderate particle size with a narrow size distribution; while co-precipitation derived particles had irregular shape and very small particle size with a wide size distribution. Nickel ferrite particles produced by sol-gel method exhibited more purity. Sol-gel synthesized nanoparticles were found to be of high saturation magnetization and hysteresis. Co-precipitation derived nickel ferrite particles, annealed at 400??C exhibited superparamagnetic nature with small saturation magnetization. Saturation magnetization increased with annealing temperature in both the methods. At the annealing temperature of 600??C, co-precipitation derived particles also became ferrimagnetic.     

Synthesis and characterization of nickel ferrite magnetic nanoparticles

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared by a polyvinyl alcohol (PVA) assisted sol-gel auto-combustion method. The structure, composition, morphology and magnetic properties of the gel precursor are characterized by powder XRD, FT-IR, TGA, HR-SEM, TEM, HR-TEM and VSM. XRD confirms the formation of single-phase nickel ferrite with space group of Fd3m and inverse spinel structure. The vibration properties of nanoparticles are analysed by FT-IR spectrum. The thermal decomposition of the gel precursors is investigated by TGA. HR-SEM and TEM images show that the particles have spherical shape with particle size in the range of ∼30 nm and consistent with XRD result. The magnetic properties of these nanoparticles are studied for confirming the ferromagnetic behaviour at room temperature.     

Levitation jet synthesis of nickel ferrite nanoparticles

Pseudospherical nickel ferrite particles 25 to 70 nm in average size were prepared by a crucibleless aerosol method through cocondensation of Fe and Ni vapors in an inert-gas flow containing a small amount of air. The particles were characterized by transmission electron microscopy, X-ray microanalysis, X-ray diffraction, BET measurements, and vibrating-sample and SQUID magnetometry. The results were used to optimize process parameters for the preparation of particles with a tailored size, specific surface area, and saturation magnetization. A dc electric field applied to the condensation zone can serve to improve the phase purity of nickel ferrite nanoparticles, reduce their size, and change their Curie temperature.     

Synthesis and electrophoretic deposition of magnetic nickel ferrite nanoparticles

Powders with particle size ∼5–15 nm of nickel ferrite have been synthesized chemically from aqueous precursor solutions. From the structural and magnetic properties, it is determined that the synthetic material possesses high NiFe₂O₄ phase purity and controllable particle size. The optimum calcination temperature is found to be ∼500 °C, at which the NiFe₂O₄ particles exhibit a saturation magnetization of 2800 G, and a particle size of about 10 nm. The particles are then deposited onto silicon substrates by electrophoretic deposition (EPD) process. The Ni ferrite particles are suspended in a medium of isopropyl alcohol with magnesium nitrate and lanthanum nitrate salts as charging agents. The transportation of particles to the substrate surface is assisted by applied electric field and particles adhere to the substrate surface by a glycerol based surfactant. The magnetic response of the EPD film has been investigated by vibrating sample magnetometer (VSM) measurements.     

An organometallic synthesis of TiO2 nanoparticles

We report the synthesis of TiO2 nanoparticles that uses the low-temperature reaction of low-valent organometallic precursors. Bis(cyclooctatetraene)titanium reacts with dimethyl sulfoxide in organic solution at temperatures as low as room temperature to produce TiO2. In the absence of any supporting ligand, the reaction gives precipitation of amorphous TiO2 powder; however, in the presence of basic ligands such as tributylphosphine, tributylphosphine oxide and trioctylphosphine oxide, the precipitation is arrested, and chemically distinct, isolated, internally crystalline TiO2 nanoparticles are formed.     

锰锌铁氧体纳米粒子的制备和磁性能研究

以金属离子的硫酸盐溶液和氨水溶液为原料,采用水热法制备了粒径为6～16nm的锰锌铁氧体纳米粒子.采用XRD、TEM、TGA和VSM等方法对产物以及产物的磁性能进行了表征.结果表明,锰锌铁氧体(Mn1-xZnxFe2O4)的居里温度随着锌的相对含量x的增加而单调的降低.锰锌铁氧体的磁化强度先随着锌的相对含量x的增加而增大,当锌的相对含量＞0.6时,磁化强度随着锌的相对含量x的增加而减小.测量了锰锌铁氧体磁流体的饱和磁化强度,计算了锰锌铁氧体(Mn0.4Zn0.6Fe2O4)纳米粒子的磁矩,其值为1.01×10-19A·m2.     

Levitation-jet synthesis of In-O nanoparticles with room-temperature ferromagnetic properties

Octahedral and roughly spherical In-In₂O₃ nanoparticles ranging in average particle size from 30 up to 300 nm were prepared by levitation-jet aerosol synthesis through condensation of metal indium vapor in helium gas flow with gaseous oxygen/air injection at ambient and reduced pressure. Scanning electron microscopy (SEM), X-ray diffraction (XRD), BET measurements, UV–vis, FT-IR, Raman, XPS, and vibrating-sample magnetometry (VSM) characterized the nanoparticles. Room-temperature ferromagnetism with maximum magnetization of up to 0.17 emu/g was recorded for the nanoparticles. The results indicate a predominant role of the actual microstructure on the nanoparticle properties. It is suggested that the observed ferromagnetic ordering may be related to intrinsic defects at the In/In₂O₃ interface structure of such a composite material. This suggestion is in good agreement with the results of optical and XPS experiments on the NPs.     

Magnetic properties of nickel ferrite nanoparticles prepared using flotation extraction

A method has been proposed for the preparation of nickel ferrite nanoparticles in a system of direct sodium dodecyl sulfate micelles using ion flotation. Amorphous nickel ferrite nanoparticles with the overall composition xNiFe₂O₄ · yFe₂O₃ · zH₂O, containing dodecyl sulfate anion impurities, have been prepared. According to transmission electron microscopy results, the size distribution of the synthesized nanoparticles has a maximum in the range 4 to 6 nm, and the ferrite is X-ray amorphous. The blocking temperature of the synthesized nanoparticles is 25 K. The ferrite possesses superparamagnetic properties, with a specific saturation magnetization of 15 A m²/kg at 5 K.     

Synthesis and magnetic properties of shuriken-like nickel nanoparticles

Shuriken-like nickel nanoparticles were successfully synthesized by a thermal decomposition method at 200 °C with Nickel(II) acetylacetonate (Ni(acac)₂) as the precursor and oleylamine (OAm) as the solvent and reductant, respectively. The phase structures, morphologies and sizes, and magnetic properties of the as-synthesized nickel products were characterized in detail by using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission-scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and vibrating sample magnetometer (VSM). Some key reaction parameters, such as the reaction time, reaction temperature and surfactants, have important influence on the morphology of the final products. XRD pattern indicated that the products are well-crystallized face-centered cubic (fcc) nickel phase. SEM images demonstrated that the nickel nanoparticles are shuriken-like morphology with average size around 150 nm. The mechanism of shuriken-like Ni nanoparticles (NPs) is proposed. The magnetic hysteresis loops of shuriken-like and spherical nickel products illustrated the ferromagnetic nature at 300 K, indicating its potential applications in magnetic storage.     

The role of aggregation of ferrite nanoparticles on their magnetic properties

We have studied the magnetic properties of aggregates of Mn0.5Zn0.5Gd(x)Fe(2-x)O4 ferrite nanoparticles, with x = 0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.11, 0.12, 0.13, 0.14, 0.15, 0.16, 0.18, 0.20. The scanning electron microscopy micrographs show significant aggregation of the nanoparticles in all samples. Zero field cooled and field cooled magnetization measurements were conducted on all samples from 400 K down to 5 K. Most zero field cooled curves were found to exhibit the usual behavior but with wide peaked regions. For some x values, the field cooled magnetization was found to increase slowly with decreasing temperature, and becomes nearly constant at low temperatures. The measurements of magnetization versus applied magnetic field were conducted on all samples at 5 K and 305 K in the field range from -15000 to 15000 Oe. At 305 K the magnetization for all samples was observed to saturate, while at 5 K the magnetization did not reach saturation for some values of x. The saturation magnetization values were suggested to be proportional to the size of particles. These results were discussed and suggested to be due to the inter-particle dipolar and exchange interactions between the particles in the aggregates, the large particle size distribution and the surface magnetization effects.     

钴铁氧体纳米粒子制备及其镧掺杂的磁性能研究

为了制备性能良好的钴铁氧体及改善其磁性能,通过改进的溶胶凝胶自蔓延燃烧法成功地制备了钴铁氧体(CoFe2O4)及掺镧(La)钴铁氧体纳米粒子.采用X射线衍射(XRD),透射电镜(TEM)、能谱分析(EDS)、振动样品磁场计(VSM)对所得粒子进行了结构、形貌、成分及磁性能表征.测试结果表明,利用改进的溶胶凝胶法制得钴铁氧体粒度均匀,且成相温度较低,500℃煅烧1h时平均粒径12nm左右;通过掺杂稀土镧元素对所得铁氧体的相结构有较强的影响,所得掺镧钴铁氧体与目标产物一致;所得钴铁氧体具有较高的矫顽力(737.33Oe),并且通过稀土元素镧的掺杂提高了钴铁氧体的矫顽力.     

纳米晶MnFe2O4的水热法合成及其磁性能

采用水热法制备了软磁材料MnFezO4纳米晶,借助XRD、IR、SEM和VSM对产物进行了表征,着重研究了水热条件如温度和时间等对MnFe2O4纳米晶的形成及其结构和磁性能的影响。结果表明水热温度较低时的产物晶化度和纯度低,表现出较差的磁性能,温度为120℃的产物其饱和磁化强度为15．34emu／g,剩磁比为0．08,矫顽力为8lOe,而在200℃下水热产物饱和磁化强度为51．49emu／g,剩磁比达到0．14,矫顽力为121Oe。     

Characterisation and intrinsic magnetic resonance properties of nickel nanoparticles

Nickel nanoparticles have been extensively characterised by atomic force microscopy (AFM), scanning electron microscopy (SEM) and confocal micro-Raman spectroscopy. AFM underestimates the particle size compared to SEM measurements. It is shown that Raman spectroscopy can detect the nanometre-thick NiO layer on the particles having frequency shifts of the modes indicative of phonon confinement. The magnetic properties of the particles are studied by ferromagnetic resonance (FMR) of magnetic field aligned particles. The alignment is achieved by suspending the particles in the liquid crystal MBBA and freezing the liquid in a 0.4 T DC magnetic field. The in-field solidification locks the direction of maximum magnetisation of the particles parallel to the direction of the applied DC magnetic field. This removes the effects of dynamical particle fluctuations of the nanoparticles on the magnetic properties allowing a study of the intrinsic magnetic properties of the magnetic nanoparticles. The intensity of the FMR signal decreased with lowering temperature for the particles frozen in the liquid in a 0.4 T DC magnetic field. The effect is suggested to be due to a reduction of the microwave skin depth with lowering temperature.     

DNA-directed magnetic network formations with ferromagnetic nanoparticles

We formed a DNA network embedding ferromagnetic cobalt nanoparticles with a 12-nm diameter through a nanoscale self-assembly of DNA molecules on large-scale mica surfaces (12 mm x 12 mm); we then confirmed its structural characteristics with an atomic force microscope. Moreover, noncontact magnetic force microscope measurement revealed that some embedded cobalt nanoparticles have different directions of magnetization, similar to "bits" in magnetic data storage devices.     

Characterization and magnetic properties of nanocrystalline nickel ferrite synthesized by hydrothermal method

Nanocrystalline nickel ferrite has been successfully synthesized through a simple hydrothermal process at 180 °C for 10 h. The as-synthesized powders were characterized by high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) techniques. TEM image and HRTEM image revealed that the as-prepared crystals were well crystallized with grain size distribution from 50 to 80 nm. The magnetic properties were studied by vibrating sample magnetometer (VSM), it exhibited lower coercivity and higher saturation magnetization which came from high crystallinity and uniform morphologies.     

Al2O3/NiO包裹Ni纳米颗粒的结构和磁性

用电弧法蒸发Ni-Al合金(4%～5%Al,质量分数),制备了Al2O3/NiO包裹Ni及Ni-Al合金纳米颗粒.高分辨电镜显示该纳米颗粒具有壳核结构,核为纳米Ni及Ni-Al合金,壳为Al2O3/NiO复合氧化物.壳的厚度为2～4 nm,颗粒的尺寸为5～60 nm.壳核结构防止纳米Ni颗粒的进一步氧化和团聚.饱和磁化强度为29.6 Am2/kg,矫顽力为4.13 kA/m.由于铁磁和反铁磁性相界面处存在交换耦合作用,磁滞曲线出现小的偏置.     

An investigation of the growth of nickel ferrite films on magnesium oxide substrates

Nickel ferrite films have been prepared by chemical vapour deposition and by the oxidation of sputtered and vacuum deposited films at high temperature. The interaction of magnesium oxide substrates with these films has been investigated using a wide range of electron optical techniques. Considerable interdiffusion is observed, which is likely to alter the magnetic properties of these films.     

Antimicrobial activity of composite nanoparticles consisting of titania photocatalytic shell and nickel ferrite magnetic core

Reverse micelle and hydrolysis have been combined to synthesize composite nanoparticles consisting of anatase–titania photocatalytic shell and nickel ferrite magnetic core. The average particle size of the composite nanoparticles was in the range of 10–15 nm. The photocatalytic shell of titania is responsible for the photocatalytic and anti-microbial activity and nickel ferrite magnetic core is responsible for the magnetic behavior, studied by superconducting quantum interference device. The anatase TiO2 coated NiFe₂O₄ nanoparticles retains the magnetic characteristics of uncoated nanocrystalline nickel ferrites, superparamagnetism (absence of hysteresis, remanence and coercivity at 300 K) and non-saturation of magnetic moments at high field. The magnetic measurements results encourage their application as removable anti-microbial photocatalysts. Bacterial inactivation with UV light in the presence of titania-coated NiFe₂O₄ nanoparticles is faster than the action with UV light alone.