共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
本文叙述了大型氢冷汽轮发电机各静态密封部位使用液态密封胶的必要性,通过试验室性能试验及在电机产品上的试用,也证明了电机上采用密封胶的可能性。在测试和试用密封胶的同时,除使用常规性能测试方法外,还制定了一些适合电机需要的测试方法,并且编制了电机使用密封胶的工艺要求。还简要介绍了有关的密封胶配方及制造方法。一、电机端盖端罩密封用液 相似文献
3.
4.
5.
介绍了XM型密炼机转子端面密封装置的改造情况。在外压式端面密封装置的接触面之前另一道与液态类似的软密封环节。利用密炼机转子端面挤压出来的胶、粉料混合物,在密封间隙量植物油,现场简单方便地心液态密封胶的胶液。外压式端面密封装置可保障自生的密封胶液受压保持在转子与支架的间隙处。 相似文献
6.
8.
水基预涂型锁固密封胶概况 总被引:1,自引:0,他引:1
国外从20世纪70年代就开展预涂型锁固密封胶的研究及应用工作,因其可部分代替液态型厌氧胶,提高汽车等机械行业生产自动化水平,国内也从上世纪80年代开展预涂型锁固密封胶的研究,并在东风汽车公司成功应用;预涂型锁固密封胶分溶剂型及水基型两大类,水基型具有安全环保等优势,本文概述了水基预涂型密封胶的国内外技术发展概况,主要对水基型预涂微胶囊厌氧锁固密封胶和单组分水基型预涂密封胶的研究、性能及应用情况作了简要的介绍和展望。 相似文献
9.
10.
<正>工业领域应用的密封粘胶是一种涂敷在两结合面间使之胶接在一起,从而将泄漏缝隙堵塞的密封材料,密封粘胶是一种高分子材料,密封粘胶一般分为液态密封胶与厌氧胶两类。液态密封胶的初始形态一般是具有流动性的粘稠液状物,能容易地填满接合面间的缝隙而形成(或经过干燥后形成)具有粘性、粘弹性或可剥性的均匀而稳定的连续薄膜。而厌氧胶则在密封胶渗入两接合面并与空气隔绝时,常温下自行聚合固化而将两接合面牢固地胶接和密封。 相似文献
11.
12.
Properties of sealants based on fluorosiloxane oligomers are considered. It is shown that polysibxanes containing the γ-trifluoropropyl radical can be applied in practice as the base for sealants. It is established that the flexibility of the siloxane chain is responsible for high freeze resistance, while large values of the energy of polar-Si-O-bond allow us to obtain materials with high thermal stability. Mechanical and technological properties of fluorosiloxane sealants are reported, and their advantages relative to materials on the basis of organofluoric rubbers are shown. The domains of the applicability of sealants for surface and interjoint sealing are discussed. It is shown that sealants based on fluorosiloxane oligomers are characterized by adequate stability to prolonged action of different fuels and are widely used in the aircraft construction. 相似文献
13.
为改善高速铁路嵌缝胶性能,以无机CaCO3为填料制备双组分聚氨酯(PU)嵌缝胶。采用扫描电子显微镜对不同CaCO3含量的PU嵌缝胶表面形貌进行观测,分析不同PU样品的力学性能、黏附性能变化规律,并评价其耐热性与耐水性。结果表明,掺入无机填料会降低PU嵌缝的表面平整度,增加其粗糙度;适量的CaCO3填料可提高PU嵌缝胶的拉伸强度、断裂伸长率以及模量,但过量的填料会降低其断裂伸长率;随着填料含量的提高,嵌缝胶的黏附性、耐水性以及耐热性亦显著提升;此外,综合PU嵌缝胶各项性能,推荐填料含量为30%。研究成果为提高高速铁路PU嵌缝胶性能以及降低生产成本提供了一定参考。 相似文献
14.
介绍了UV固化胶粘剂在液晶显示器(LCD)组装中的应用,LCD生产中的主板密封、端口密封、接线粘接、临时定位、裸芯片的倒装玻璃涂覆等工序使用UV固化胶粘剂是最适宜的。 相似文献
15.
16.
《Journal of the European Ceramic Society》2003,23(3):445-454
Within the framework of a cooperation project, ceramic components of alumina, Al2O3, were sealed in a gastight manner for chemical applications using a sealing compound based on ceramic raw materials. The sealing is adapted to the Al2O3 ceramic with respect to expansion coefficient and wettability and it is inert, mechanically stable, chemically resistant and above all gastight at application temperatures of approx. 1000 °C. This was achieved with high reproducibility by a composition in the SiO2–Al2O3–CaO–K2O quaternary system. The ceramic sealing compound is selectively crystallized by adequate temperature control and shows then the required high temperature resistance. The strengths achieved are sufficient for the planned application as a sealing material for a ceramic microreactor. The temperature cycling resistance and the thermal shock resistance are also adapted to Al2O3. Additional tests of commercial glass sealants were carried out to evaluate the results obtained. 相似文献
17.
18.
19.
以舱口密封带为主,简介飞机专用橡胶密封条的研制。通过胶料主体材料和织物骨架材料的选择、结构设计、产品成型、设计验证和工程化配套生产,研制的飞机专用橡胶密封型材与原产品相比具有耐天候老化性能好,对气和水的密封性能优和使用寿命长等特点,实际使用效果良好。 相似文献
20.
聚氨酯密封胶国外研究进展 总被引:4,自引:0,他引:4
介绍了国外在提高聚氨酯密封胶固化性、粘接性、弹性及耐候性等性能方面的研究成果 ,内容涉及单组分湿固化密封胶 (含硅烷改性单组分胶 )及普通双组分密封胶、含多硫化物的双组分聚氨酯密封胶 相似文献