共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
为提升轿车轮毂造型设计效率,探索一种以感性意象为导向的参数化设计方法。选取目前主要的轿车轮毂造型,构建轮毂造型样本库,归纳用户对轮毂造型评价的感性意象关键词,分析造型意象与造型特征的关系;以造型特征为变量,基于Grasshopper插件构建轮毂数字模型,通过参数调节实现与造型意象的匹配关系;经过样本分析、用户评价和编程设计,确定了3对轮毂感性意象关键词,分析了5个造型特征与感性意象的关系。在Grasshopper插件中,基于6个造型特征变量,进行了轮毂的参数化设计。通过对参数化生成轮毂样本的用户评价,验证了轮毂造型意象与造型特征的关系,证明了以感性意象为导向的参数化设计方法的有效性,扩展了参数化设计的应用领域。 相似文献
3.
分析了产品造型设计的国内外研究现状,结合消费者心理学,了解用户对智能手表的需求,确立基本设计方向。运用感性工学,结合形态分析法提取设计要素;通过数量化理论Ⅰ,将用户感性意象进行量化,建立造型特征与意象语意的数学模型,进行计算求解,得出造型设计方案预测。将预测方案与消费者心理调查结果进行对比,证实了预测方案的真实性和准确性。研究结果表明,基于消费者心理和感性工学量化理论的设计流程和设计方法对新产品造型的设计,具有针对性强、设计方向明确等特点,有助于像智能手表等新产品的快速和优化设计。 相似文献
4.
5.
6.
基于感性意象的越野车造型设计研究 总被引:1,自引:0,他引:1
汽车外观造型对于用户的情感体验至关重要,汽车外观造型与用户主观偏好的匹配程度成为汽车造型设计成败的重要因素。选取典型汽车外观造型风格意象词汇进行研究,利用语义差分法(SD法)等对感性意象词汇进行视觉化描述和量化表达;将汽车造型抽象并简化为造型特征线,利用贝塞尔曲线进行量化描述,基于感性工学原理与方法研究汽车造型特征线和感性意象词汇之间的映射关系,并以此结果指导越野车的造型设计,从而提升越野车造型设计与感性意象之间的匹配度,降低越野车造型设计开发的市场风险。 相似文献
7.
8.
9.
针对工业装备造型、空间布局等外观特征要素与用户感性认知的复杂映射问题,提出基于PSO-BP神经网络算法的工业装备造型优化设计方法.结合因子降维、文本挖掘等方法确定代表性样本和感性意象词汇,采用语义差异法建立工业装备外观意象特征评价量表.依据用户感性意象评价与用户喜爱度建立线性回归公式,通过PSO-BP神经网络建立造型元素特征与用户感性认知间的映射模型,应用线性回归公式和映射模型构建工业装备造型设计系统.以某企业风电车载换油机为例,验证了该设计系统的有效性,为工业装备的造型设计提供参考. 相似文献
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
20.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献