共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
金硅面垒半导体探测器多用于α粒子的探测,由它组成的α、β谱仪对环境温度的变化比较敏感,表现为α谱峰位的漂移,为了了解温度对金硅面垒半导体探测器的影响,对其进行了测试研究,以便提高系统的测量精度. 相似文献
3.
4.
5.
6.
针对α能谱测量需要探测器能量分辨率高、性能稳定及探测效率高等要求,选用金硅面垒型半导体探测器进行α能谱测量.论述了金硅面探测器的主要性能指标及影响因素,同时针对探测器输出信号的特点以及α能谱测量要求,从理论上分析了前置放大器的类型及设计时需要注意的事项,并设计了一种实用低噪声电荷灵敏前置放大器.实测α能谱数据表明,性能满足α能谱测量要求. 相似文献
7.
α射线冷却法测空气湿度的研究 总被引:1,自引:1,他引:0
莫长涛 《核电子学与探测技术》1997,17(1):80-81
本文介绍α射线冷却法测定空气湿度,采用金硅面垒半导体探测器和温度传感器研制的一套装置,其露点温度测量精度好于±1℃。 相似文献
8.
9.
10.
一、引言金-硅面垒型探测器具有下列的特点:能量分辨率高;脉冲上升时间短;耗尽层宽度可调节,因而能甄别不同的射线;脉冲高度与能量之间的线性响应好;对γ射线、中子本底不灵敏,适于在γ射线、中子本底较高的情况下测量带电粒子;工艺简单,成本较低等等。因此,自1949年麦凯(K.G.McKay)首先利用半导体探测器探测射线以来,它在核辐射探测领域中得到了很大的发展。关于金-硅面垒型探测器的制作工艺、探测原理、性能和应用已有报导。 相似文献
11.
12.
介绍了金硅面垒探测器因放射性的污染或粉尘、油渍等污物的沾附.致使其性能变坏而无法正常使用时.通过清洗和一定的处置使其性能恢复的方法。同时.还叙述了金硅面垒探测器的维护保养方法和使用注意事项。 相似文献
13.
《Journal of Nuclear Science and Technology》2013,50(2):87-94
The residual defect in the pulse height defect of a silicon surface barrier detector is investigated theoretically. An application of the model of charge collection process leads to another candidate for the residual defect than the recombination defect. The residual defect is due to incomplete charge induction by electrons and holes inside a plasma column, which has dielectricity-like property. Quantity of induced charge is shown in a ratio to the number of produced electron-hole pairs as functions of depletion layer thickness, plasma column length and resistivity of the detector. Experimental result of the residual defect of 58Ni ion and its analysis method applying this model are presented. The residual defect is successfully explained by this model. 相似文献
14.
Yanwen Zhang Harry J. Whitlow 《Nuclear instruments & methods in physics research. Section B, Beam interactions with materials and atoms》2002,190(1-4):383-386
Pulse height versus energy calibrations of a Si p-i-n diode and a Au-/n-Si surface barrier detector have been studied for heavy ions with atomic number (Z1) from 3 to 79 in a range from 0.1 to 0.8 MeV per nucleon as a function of bias voltage and detector tilting angle. The detector response is simultaneously measured using a time of flight-energy elastic recoil detection analysis set-up with recoils produced over a wide energy range from a thick target of each element. Prior to impinging on the Si detector, the individual recoil is tagged by its energy determined from the time of flight and tabulated isotopic mass. For both detectors, the pulse height-energy calibration for recoils with a given Z1 is described well by a linear relationship with small systematic deviations. The linear-fit parameters show similar, but not identical dependence on both Z1 and bias voltage (collecting field strength) for the surface barrier detectors and the p-i-n diode. These results suggest that the efficiency of electron–hole pair collection is markedly dependent on the different electric field configurations for the two detector structures. 相似文献
15.
采用性能优越的15道硅漂移探测器(SDD)阵列,在EAST全超导托卡马克上建立了1套较为完善的软X射线能谱诊断系统,用以测量等离子体在软X射线辐射能段(1~20keV)的能谱。该诊断系统的观测范围基本覆盖了整个等离子体空间,因此,可满足EAST不同放电位形下电子温度测量的要求。利用该诊断系统,可获得时间分辨达50ms、空间分辨约为7cm的电子温度剖面。通过对比发现,由该诊断系统所得到的电子温度与其它电子温度诊断系统所测量的电子温度基本一致。此外,该诊断系统还可监测在软X射线能量范围内出现的一些金属杂质的特征线辐射。 相似文献
16.
17.
18.
20.
采用能量E-速度v关联技术测量裂变产物碎片的动能和飞行速度能精确测定裂变产物核的质量。本工作主要研究能量-速度关联技术的可行性并解决相关关键技术。实验测量系统由飞行时间测量单元、能量探测器和真空靶室系统组成。实验中用1对微通道板探测器测量粒子飞行时间来确定粒子速度,金硅面垒探测器测量粒子能量。对于~(241) Am放射源5.48 MeVα粒子,飞行时间测量系统时间分辨(FWHM)为186ps,金硅面垒探测器能量分辨(FWHM)为44keV。实验完成了~(252) Cf自发裂变源产物质量分布试测量。初步实验结果显示,裂变产物质量分布在110amu(amu为原子质量单位)的位置时,其质量分辨为1.6amu。 相似文献