Electrostatic discharge protection design for mixed-voltage CMOS I/O buffers

A new electrostatic discharge (ESD) protection circuit, using the stacked-nMOS triggered silicon controlled rectifier (SNTSCR) as the ESD clamp device, is designed to protect the mixed-voltage I/O buffers of CMOS ICs. The new proposed ESD protection circuit, which combines the stacked-nMOS structure with the gate-coupling circuit technique into the SCR device, is fully compatible to general CMOS processes without causing the gate-oxide reliability problem. Without using the thick gate oxide, the experimental results in a 0.35 /spl mu/m CMOS process have proven that the human-body-model ESD level of the mixed-voltage I/O buffer can be successfully increased from the original /spl sim/2 kV to >8 kV by using this proposed ESD protection circuit.     

SCR device fabricated with dummy-gate structure to improve turn-on speed for effective ESD protection in CMOS technology

Turn-on speed is the main concern for an on-chip electrostatic discharge (ESD) protection device, especially in the nanoscale CMOS processes with ultrathin gate oxide. A novel dummy-gate-blocking silicon-controlled rectifier (SCR) device employing a substrate-triggered technique is proposed to improve the turn-on speed of an SCR device for using in an on-chip ESD protection circuit to effectively protect the much thinner gate oxide. The fabrication of the proposed SCR device with dummy-gate structure is fully process-compatible with general CMOS process, without using an extra mask layer or adding process steps. From the experimental results in a 0.25-/spl mu/m CMOS process with a gate-oxide thickness of /spl sim/50 /spl Aring/, the switching voltage, turn-on speed, turn-on resistance, and charged-device-model ESD levels of the SCR device with dummy-gate structure have been greatly improved, as compared to the normal SCR with shallow trench isolation structure.     

Latchup-free ESD protection design with complementary substrate-triggered SCR devices

The turn-on mechanism of silicon-controlled rectifier (SCR) devices is essentially a current triggering event. While a current is applied to the base or substrate of an SCR device, it can be quickly triggered on into its latching state. In this paper, latchup-free electrostatic discharge (ESD) protection circuits, which are combined with the substrate-triggered technique and an SCR device, are proposed. A complementary circuit style with the substrate-triggered SCR device is designed to discharge both the pad-to-V/sub SS/ and pad-to-V/sub DD/ ESD stresses. The novel complementary substrate-triggered SCR devices have the advantages of controllable switching voltage, adjustable holding voltage, faster turn-on speed, and compatible to general CMOS process without extra process modification such as the silicide-blocking mask and ESD implantation. The total holding voltage of the substrate-triggered SCR device can be linearly increased by adding the stacked diode string to avoid the transient-induced latchup issue in the ESD protection circuits. The on-chip ESD protection circuits designed with the proposed complementary substrate-triggered SCR devices and stacked diode string for the input/output pad and power pad have been successfully verified in a 0.25-/spl mu/m salicided CMOS process with the human body model (machine model) ESD level of /spl sim/7.25 kV (500 V) in a small layout area.     

Substrate-triggered SCR device for on-chip ESD protection in fully silicided sub-0.25-/spl mu/m CMOS process

The turn-on mechanism of a silicon-controlled rectifier (SCR) device is essentially a current triggering event. While a current is applied to the base or substrate of the SCR device, it can be quickly triggered into its latching state. In this paper, a novel design concept to turn on the SCR device by applying the substrate-triggered technique is first proposed for effective on-chip electrostatic discharge (ESD) protection. This novel substrate-triggered SCR device has the advantages of controllable switching voltage and adjustable holding voltage and is compatible with general CMOS processes without extra process modification such as the silicide-blocking mask and ESD implantation. Moreover, the substrate-triggered SCR devices can be stacked in ESD protection circuits to avoid the transient-induced latch-up issue. The turn-on time of the proposed substrate-triggered SCR devices can be reduced from 27.4 to 7.8 ns by the substrate-triggering technique. The substrate-triggered SCR device with a small active area of only 20 /spl mu/m /spl times/ 20 /spl mu/m can sustain the HBM ESD stress of 6.5 kV in a fully silicided 0.25-/spl mu/m CMOS process.     

Very high density RF MIM capacitors (17 fF//spl mu/m/sup 2/) using high-/spl kappa/ Al/sub 2/O/sub 3/ doped Ta/sub 2/O/sub 5/ dielectrics

Using high-/spl kappa/ Al/sub 2/O/sub 3/ doped Ta/sub 2/O/sub 5/ dielectric, we have obtained record high MIM capacitance density of 17 fF//spl mu/m/sup 2/ at 100 kHz, small 5% capacitance reduction to RF frequency range, and low leakage current density of 8.9/spl times/10/sup -7/ A/cm/sup 2/. In combination of both high capacitor density and low leakage current density, a very low leakage current of 5.2/spl times/10/sup -12/ A is calculated for a typical large 10 pF capacitor used in RF IC that is even smaller than that of a deep sub-/spl mu/m MOSFET. This very high capacitance density with good MIM capacitor characteristics can significantly reduce the chip size of RF ICs.     

Evaluation of RF electrostatic discharge (ESD) protection in 0.18-μm CMOS technology

Electrostatic discharge (ESD) protection design is challenging for RF integrated circuits (ICs) because of the trade-off between the ESD robustness and parasitic capacitance. ESD protection devices are fabricated using the 0.18-μm RF CMOS process and their RF ESD characteristics are investigated by the transmission line pulsing (TLP) tester. The results suggest that the silicon controlled rectifier (SCR) is superior to the diode and NMOS from the perspective of ESD robustness and parasitic, but the SCR nevertheless possesses a longer turn-on time.     

Very low noise RF nMOSFETs on plastic by substrate thinning and wafer transfer

A very low minimum noise figure (NF/sub min/) of 1.2 dB and a high associated gain of 12.8 dB at 10 GHz were measured for six-finger, 0.18-/spl mu/m radio frequency (RF) metal-oxide semiconductor field-effect transistors mounted on insulating plastic following substrate-thinning (/spl sim/30 /spl mu/m) and wafer transfer. Before this process, the devices had a slightly better RF performance of 1.1-dB NF/sub min/ and a 13.7-dB associated gain. The small RF performance degradation of the active transistors transferred to plastic shows the potential of integrating electronics onto plastic.     

Circular under-pad multiple-mode ESD protection structure for ICs

A novel circular pad-oriented low-parasitic all-mode electrostatic discharge (ESD) protection structure is designed in BiCMOS for RF and mixed-signal (MS) ICs, featuring tunable triggering, low voltage clamping (~2 V), low discharge impedance (~Ω) and low leakage current (~pA). It consumes limited silicon and achieves 14 kV ESD protection     

A new ESD protection structure for high-speed GaAs RF ICs

We demonstrate a new electrostatic discharge (ESD) protection structure for high-speed GaAs RF ICs. The structure is composed of small diodes and large transistors using an InGaP heterojunction bipolar transistor (HBT) technology. Its loading effect and its robustness are evaluated experimentally. The impedance of the new structure at OFF state, represented with an equivalent shunt capacitance and an equivalent shunt resistance, are 0.22 pF and 500 /spl Omega/ at 10 GHz. The structure can withstand +2700-V and -2900-V human body model ESD pulses. It can clamp voltage more effectively than the conventional diode-based ESD structure. The new structure can be used to protect 10 Gb/s input/output pins of high-speed RF ICs against ESD.     

Integrated high-/spl kappa/ (/spl kappa/ /spl sim/19) MIM capacitor with Cu/low-/spl kappa/ interconnects for RF application

We demonstrate a high-performance metal-high /spl kappa/ insulator-metal (MIM) capacitor integrated with a Cu/low-/spl kappa/ backend interconnection. The high-/spl kappa/ used was laminated HfO/sub 2/-Al/sub 2/O/sub 3/ with effective /spl kappa/ /spl sim/19 and the low-/spl kappa/ dielectric used was Black Diamond with /spl kappa/ /spl sim/2.9. The MIM capacitor (/spl sim/13.4 fF//spl mu/m/sup 2/) achieved a Q-factor /spl sim/53 at 2.5 GHz and 11.7 pF. The resonant frequency f/sub r/ was 21% higher in comparison to an equivalently integrated Si/sub 3/N/sub 4/-MIM capacitor (/spl sim/0.93 fF//spl mu/m/sup 2/) having similar capacitance 11.2 pF. The impacts of high-/spl kappa/ insulator and low-/spl kappa/ interconnect dielectric on the mechanism for resonant frequency improvement are distinguished using equivalent circuit analysis. This letter suggests that integrated high-/spl kappa/ MIM could be a promising alternative capacitor structure for future high-performance RF applications.     

Diamond FET using high-quality polycrystalline diamond with f/sub T/ of 45 GHz and f/sub max/ of 120 GHz

Using high-quality polycrystalline chemical-vapor-deposited diamond films with large grains (/spl sim/100 /spl mu/m), field effect transistors (FETs) with gate lengths of 0.1 /spl mu/m were fabricated. From the RF characteristics, the maximum transition frequency f/sub T/ and the maximum frequency of oscillation f/sub max/ were /spl sim/ 45 and /spl sim/ 120 GHz, respectively. The f/sub T/ and f/sub max/ values are much higher than the highest values for single-crystalline diamond FETs. The dc characteristics of the FET showed a drain-current density I/sub DS/ of 550 mA/mm at gate-source voltage V/sub GS/ of -3.5 V and a maximum transconductance g/sub m/ of 143 mS/mm at drain voltage V/sub DS/ of -8 V. These results indicate that the high-quality polycrystalline diamond film, whose maximum size is 4 in at present, is a most promising substrate for diamond electronic devices.     

Substrate-triggered ESD protection circuit without extra process modification

A substrate-triggered technique is proposed to improve electrostatic discharge (ESD) protection efficiency of ESD protection circuits without extra salicide blocking and ESD-implantation process modifications in a salicided shallow-trench-isolation CMOS process. By using the layout technique, the whole ESD protection circuit can be merged into a compact device structure to enhance the substrate-triggered efficiency. This substrate-triggered design can increase ESD robustness and reduce the trigger voltage of the ESD protection device. This substrate-triggered ESD protection circuit with a field oxide device of channel width of 150 /spl mu/m can sustain a human-body-model ESD level of 3250 V without any extra process modification. Comparing to the traditional ESD protection design of gate-grounded nMOS (ggnMOS) with silicide-blocking process modification in a 0.25-/spl mu/m salicided CMOS process, the proposed substrate-triggered design without extra process modification can improve ESD robustness per unit silicon area from the original 1.2 V//spl mu/m/sup 2/ of ggnMOS to 1.73 V//spl mu/m/sup 2/.     

Long-wavelength In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As large-area avalanche photodiodes and arrays

Large-area (500-/spl mu/m diameter) mesa-structure In/sub 0.53/Ga/sub 0.47/As-In/sub 0.52/Al/sub 0.48/As avalanche photodiodes (APDs) are reported. The dark current density was /spl sim/2.5/spl times/10/sup -2/ nA//spl mu/m/sup 2/ at 90% of breakdown; low surface leakage current density (/spl sim/4.2 pA//spl mu/m) was achieved with wet chemical etching and SiO/sub 2/ passivation. An 18 /spl times/ 18 APD array with uniform distributions of breakdown voltage, dark current, and multiplication gain has also been demonstrated. The APDs in the array achieved 3-dB bandwidth of /spl sim/8 GHz at low gain and a gain-bandwidth product of /spl sim/120 GHz.     

SOI technology for radio-frequency integrated-circuit applications

This paper presents a silicon-on-insulator (SOI) integration technology, including structures and processes of OFF-gate power nMOSFETs, conventional lightly doped drain (LDD) nMOSFETs, and spiral inductors for radio frequency integrated circuit (RFIC) applications. In order to improve the performance of these integrated devices, body contact under the source (to suppress floating-body effects) and salicide (to reduce series resistance) techniques were developed for transistors; additionally, locally thickened oxide (to suppress substrate coupling) and ultra-thick aluminum up to 6 /spl mu/m (to reduce spiral resistance) were also implemented for spiral inductors on high-resistivity SOI substrate. All these approaches are fully compatible with the conventional CMOS processes, demonstrating devices with excellent performance in this paper: 0.25-/spl mu/m gate-length offset-gate power nMOSFET with breakdown voltage (BV/sub DS/) /spl sim/ 22.0 V, cutoff frequency (f/sub T/)/spl sim/15.2 GHz, and maximal oscillation frequency (f/sub max/)/spl sim/8.7 GHz; 0.25-/spl mu/m gate-length LDD nMOSFET with saturation current (I/sub DS/)/spl sim/390 /spl mu/A//spl mu/m, saturation transconductance (g/sub m/)/spl sim/197 /spl mu/S//spl mu/m, cutoff frequency /spl sim/ 25.6 GHz, and maximal oscillation frequency /spl sim/ 31.4 GHz; 2/5/9/10-nH inductors with maximal quality factors (Q/sub max/) 16.3/13.1/8.95/8.59 and self-resonance frequencies (f/sub sr/) 17.2/17.7/6.5/5.8 GHz, respectively. These devices are potentially feasible for RFIC applications.     

Evaluation on board-level noise filter networks to suppress transient-induced latchup in CMOS ICs under system-level ESD test

Different types of board-level noise filter networks are evaluated to find their effectiveness for improving the immunity of CMOS ICs against the transient-induced latchup (TLU) under the system-level electrostatic discharge (ESD) test. By choosing proper components in each noise filter network, the TLU immunity of CMOS ICs can be greatly improved. All the experimental evaluations have been verified with the silicon-controlled rectifier (SCR) test structures and the ring oscillator circuit fabricated in a 0.25-/spl mu/m CMOS technology. Some board-level solutions can be further integrated into the chip design to effectively improve the TLU immunity of CMOS IC products.     

On-chip ESD protection design with substrate-triggered technique for mixed-Voltage I/O circuits in subquarter-micrometer CMOS Process

A new electrostatic discharge (ESD) protection design, by using the substrate-triggered stacked-nMOS device, is proposed to protect the mixed-voltage I/O circuits of CMOS ICs. The substrate-triggered technique is applied to lower the trigger voltage of the stacked-nMOS device to ensure effective ESD protection for the mixed-voltage I/O circuits. The proposed ESD protection circuit with the substrate-triggered technique is fully compatible to general CMOS process without causing the gate-oxide reliability problem. Without using the thick gate oxide, the new proposed design has been fabricated and verified for 2.5/3.3-V tolerant mixed-voltage I/O circuit in a 0.25-/spl mu/m salicided CMOS process. The experimental results have confirmed that the human-body-model ESD level of the mixed-voltage I/O buffers can be successfully improved from the original 3.4 to 5.6 kV by using this new proposed ESD protection circuit.     

A metal/polysilicon damascene gate technology for RF power LDMOSFETs

This letter describes a metal/polysilicon damascene gate technology for RF power LDMOSFETs. We compare the performance of SOI LDMOSFETs with metal/polysilicon damascene gates to that of identical devices with n/sup +/ polysilicon gates. The gate sheet resistance of the metal/polysilicon gate was 0.2 /spl Omega//sq. This very low sheet resistance greatly improved f/sub max/ and peak PAE, especially for the wide gate fingers that are critical in RF power applications. With a 140 /spl mu/m gate finger width, f/sub max/ was improved from 5 GHz to 25 GHz, and peak PAE at 1.9 GHz was improved from 12% to 52%.     

SODEL FET: novel channel and source/drain profile engineering schemes by selective Si epitaxial growth technology

In this paper, novel channel and source/drain profile engineering schemes are proposed for sub-50-nm bulk CMOS applications. This device, referred to as the silicon-on-depletion layer FET (SODEL FET), has the depletion layer beneath the channel region, which works as an insulator like a buried oxide in a silicon-on-insulator MOSFET. Thanks to this channel structure, junction capacitance (C/sub j/) has been reduced in SODEL FET, i.e., C/sub j/ (area) was /spl sim/0.73 fF//spl mu/m/sup 2/ both in SODEL nFET and pFET at Vbias =0.0 V. The body effect coefficient /spl gamma/ is also reduced to less than 0.02 V/sup 1/2/. Nevertheless, current drives of 886 /spl mu/A//spl mu/m (I/sub off/=15 nA//spl mu/m) in nFET and -320 /spl mu/A//spl mu/m (I/sub off/=10 nA//spl mu/m) in pFET have been achieved in 70-nm gate length SODEL CMOS with |V/sub dd/|=1.2 V. New circuit design schemes are also proposed for high-performance and low-power CMOS applications using the combination of SODEL FETs and bulk FETs on the same chip for 90-nm-node generation and beyond.     

ESD protection design for 1- to 10-GHz distributed amplifier in CMOS technology

Two distributed electrostatic discharge (ESD) protection schemes are presented and applied to protect distributed amplifiers (DAs) against ESD stresses. Fabricated in a standard 0.25-/spl mu/m CMOS process, the DA with the first protection scheme of the equal-sized distributed ESD (ES-DESD) protection scheme, contributing an extra 300 fF parasitic capacitance to the circuit, can sustain the human-body model (HBM) ESD level of 5.5 kV and machine-model (MM) ESD level of 325 V and exhibits the flat-gain of 4.7 /spl plusmn/ 1 dB from 1 to 10 GHz. With the same amount of parasitic capacitance, the DA with the second protection scheme of the decreasing-sized distributed ESD (DS-DESD) protection scheme achieves better ESD robustness, where the HBM ESD level over 8 kV and MM ESD level is 575 V, and has the flat-gain of 4.9 /spl plusmn/ 1.1 dB over the 1 to 9.2-GHz band. With these two proposed ESD protection schemes, the broad-band RF performances and high ESD robustness of the DA can be successfully codesigned to meet the application specifications.     

Millimeter-wave voltage-controlled oscillators in 0.13-/spl mu/m CMOS technology

This paper describes the design of CMOS millimeter-wave voltage controlled oscillators. Varactor, transistor, and inductor designs are optimized to reduce the parasitic capacitances. An investigation of tradeoff between quality factor and tuning range for MOS varactors at 24 GHz has shown that the polysilicon gate lengths between 0.18 and 0.24 /spl mu/m result both good quality factor (>12) and C/sub max//C/sub min/ ratio (/spl sim/3) in the 0.13-/spl mu/m CMOS process used for the study. The components were utilized to realize a VCO operating around 60 GHz with a tuning range of 5.8 GHz. A 99-GHz VCO with a tuning range of 2.5 GHz, phase noise of -102.7 dBc/Hz at 10-MHz offset and power consumption of 7-15mW from a 1.5-V supply and a 105-GHz VCO are also demonstrated. This is the CMOS circuit with the highest fundamental operating frequency. The lumped element approach can be used even for VCOs operating near 100-GHz and it results a smaller circuit area.