Facile synthesis of Ag dendrites on Al foil via galvanic replacement reaction with [Ag(NH3)2]Cl for ultrasensitive SERS detecting of biomolecules

Symmetric silver dendrites have been synthesized on commercial aluminum foil via galvanic replacement reaction with [Ag(NH₃)₂]Cl. This process is facile and environmentally friendly, without the use of any templates, surfactants or oxidants, and also avoiding the introduction of fluoride anions as a strong toxicity resulting in hypocalcemia. The products were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM) and X-ray diffraction (XRD). SEM characterizations and electrochemical measurements including an electrochemical direct current polarization method and OCP-t technique demonstrate that chloride has proven to be the key factor to the formation of well-defined dendritic shape. The as-prepared Ag dendrites are developed as a surface-enhanced Raman scattering (SERS)-active platform for detection of folic acid, DNA and RNA with well resolved bands and high Raman intensities. The detection concentration for the three biomolecules reaches the level of 10⁻¹² M, and thus the symmetric silver dendrites can potentially be employed as effective SERS sensors for label-free and ultrasensitive biomolecule detection.     

Promising Mass-Productive 4-Inch Commercial SERS Sensor with Particle in Micro-Nano Porous Ag/Si/Ag Structure Using in Auxiliary Diagnosis of Early Lung Cancer

The construction of commercial surface enhanced Raman scattering (SERS) sensors suitable for clinical applications is a pending problem, which is heavily limited by the low production of high-performance SERS bases, because they usually require fine or complicated micro/nano structures. To solve this issue, herein, a promising mass-productive 4-inch ultrasensitive SERS substrate available for early lung cancer diagnosis is proposed, which is designed with a special architecture of particle in micro-nano porous structure. Benefitting from the effective cascaded electric field coupling inside the particle-in-cavity structure and efficient Knudsen diffusion of molecules within the nanohole, the substrate exhibits remarkable SERS performance for gaseous malignancy biomarker, with the limit of detection is 0.1 ppb and the average relative standard deviation value at different scales (from cm² to µm²) is ≈16.5%. In practical application, this large-sized sensor can be further divided into small ones (1 × 1 cm²), and more than 65 chips will be obtained from just one 4-inch wafer, greatly increasing the output of commercial SERS sensor. Further, a medical breath bag composed of this small chip is designed and studied in detail here, which suggested high-specificity recognition for lung cancer biomarker in mixed mimetic exhalation tests.     

Split‐GFP: SERS Enhancers in Plasmonic Nanocluster Probes

The assembly of plasmonic metal nanoparticles into hot spot surface‐enhanced Raman scattering (SERS) nanocluster probes is a powerful, yet challenging approach for ultrasensitive biosensing. Scaffolding strategies based on self‐complementary peptides and proteins are of increasing interest for these assemblies, but the electronic and the photonic properties of such hybrid nanoclusters remain difficult to predict and optimize. Here, split‐green fluorescence protein (sGFP) fragments are used as molecular glue and the GFP chromophore is used as a Raman reporter to assemble a variety of gold nanoparticle (AuNP) clusters and explore their plasmonic properties by numerical modeling. It is shown that GFP seeding of plasmonic nanogaps in AuNP/GFP hybrid nanoclusters increases near‐field dipolar couplings between AuNPs and provides SERS enhancement factors above 10⁸. Among the different nanoclusters studied, AuNP/GFP chains allow near‐infrared SERS detection of the GFP chromophore imidazolinone/exocyclic C?C vibrational mode with theoretical enhancement factors of 10⁸–10⁹. For larger AuNP/GFP assemblies, the presence of non‐GFP seeded nanogaps between tightly packed nanoparticles reduces near‐field enhancements at Raman active hot spots, indicating that excessive clustering can decrease SERS amplifications. This study provides rationales to optimize the controlled assembly of hot spot SERS nanoprobes for remote biosensing using Raman reporters that act as molecular glue between plasmonic nanoparticles.     

Carbon nanowalls amplify the surface-enhanced Raman scattering from Ag nanoparticles

We report surface-enhanced Raman scattering (SERS) from Ag nanoparticles decorated on thin carbon nanowalls (CNWs) grown by microwave plasma chemical vapor deposition. The Ag morphology is controlled by exposing the CNWs to oxygen plasma and through the electrodeposition process by varying the number of deposition cycles. The SERS substrates are capable of detecting low concentrations of rhodamine 6G and bovine serum albumin, showing much higher Raman enhancement than ordinary planar HOPG with Ag decoration. The major factors contributing to this behavior include: high density of Ag nanoparticles, large surface area, high surface roughness, and the underlying presence of vertically oriented CNWs. The relatively simple procedure of substrate preparation and nanoparticle decoration suggests that this is a promising approach for fabricating ultrasensitive SERS substrates for biological and chemical detection at the single-molecule level, while also enabling the study of fundamental SERS phenomena.     

Silver nanoclusters films for single molecule detection using Surface Enhanced Raman Scattering (SERS)

A highly efficient Surface Enhanced Raman Scattering (SERS) substrate was prepared using a nanocluster deposition system that enabled detection of Crystal Violet molecules down to a single molecule level. The large SERS signal enhancement can be attributed to the presence of nano gaps on the surface of the nanoclusters which create abundant hot spots for electric field enhancement. Observed variations in the Raman peaks at very low molar concentrations in the range 4 × 10⁻¹⁴–3.2 × 10⁻¹⁸ M suggest that the spectra are due to a single molecule. Possible mechanisms for ultrahigh SERS sensitivity of the substrates are discussed. These substrates take the detection limit of CV down by two orders of magnitude as compared to those reported in literature.     

Ultrasensitive vapor detection with surface-enhanced Raman scattering-active gold nanoparticle immobilized flow-through multihole capillaries

We developed novel flow-through surface-enhanced Raman scattering (SERS) platforms using gold nanoparticle (Au-NP) immobilized multihole capillaries for rapid and sensitive vapor detection. The multihole capillaries consisting of thousands of micrometer-sized flow-through channels provide many unique characteristics for vapor detection. Most importantly, its three-dimensional SERS-active micro-/nanostructures make available multilayered assembly of Au-NPs, which greatly increase SERS-active surface area within a focal volume of excitation and collection, thus improving the detection sensitivity. In addition, the multihole capillary's inherent longitudinal channels offer rapid and convenient vapor delivery, yet its micrometer-sized holes increase the interaction between vapor molecules and SERS-active substrate. Experimentally, rapid pyridine vapor detection (within 1 s of exposure) and ultrasensitive 4-nitrophenol vapor detection (at a sub-ppb level) were successfully achieved in open air at room temperature. Such an ultrasensitive SERS platform enabled, for the first time, the investigation of both pyridine and 4-nitrophenol vapor adsorption isotherms at very low concentrations. Type I and type V behaviors of the International Union of Pure and Applied Chemistry isotherm were well observed, respectively.     

Wafer‐Scale Double‐Layer Stacked Au/Al2O3@Au Nanosphere Structure with Tunable Nanospacing for Surface‐Enhanced Raman Scattering

Fabricating perfect plasmonic nanostructures has been a major challenge in surface enhanced Raman scattering (SERS) research. Here, a double‐layer stacked Au/Al₂O₃@Au nanosphere structures is designed on the silicon wafer to bring high density, high intensity “hot spots” effect. A simply reproducible high‐throughput approach is shown to fabricate feasibly this plasmonic nanostructures by rapid thermal annealing (RTA) and atomic layer deposition process (ALD). The double‐layer stacked Au nanospheres construct a three‐dimensional plasmonic nanostructure with tunable nanospacing and high‐density nanojunctions between adjacent Au nanospheres by ultrathin Al₂O₃ isolation layer, producing highly strong plasmonic coupling so that the electromagnetic near‐field is greatly enhanced to obtain a highly uniform increase of SERS with an enhancement factor (EF) of over 10⁷. Both heterogeneous nanosphere group (Au/Al₂O₃@Ag) and pyramid‐shaped arrays structure substrate can help to increase the SERS signals further, with a EF of nearly 10⁹. These wafer‐scale, high density homo/hetero‐metal‐nanosphere arrays with tunable nanojunction between adjacent shell‐isolated nanospheres have significant implications for ultrasensitive Raman detection, molecular electronics, and nanophotonics.     

In vitro biomechanical properties,fluorescence imaging,surface-enhanced Raman spectroscopy,and photothermal therapy evaluation of luminescent functionalized CaMoO4:Eu@Au hybrid nanorods on human lung adenocarcinoma epithelial cells

Highly dispersible Eu³⁺-doped CaMoO₄@Au-nanorod hybrid nanoparticles (HNPs) exhibit optical properties, such as plasmon resonances in the near-infrared region at 790 nm and luminescence at 615 nm, offering multimodal capabilities: fluorescence imaging, surface-enhanced Raman spectroscopy (SERS) detection and photothermal therapy (PTT). HNPs were conjugated with a Raman reporter (4-mercaptobenzoic acid), showing a desired SERS signal (enhancement factor 5.0 × 10⁵). The HNPs have a heat conversion efficiency of 25.6%, and a hyperthermia temperature of 42°C could be achieved by adjusting either concentration of HNPs, or laser power, or irradiation time. HNPs were modified with antibody specific to cancer biomarker epidermal growth factor receptor, then applied to human lung cancer (A549) and mouse hepatocyte cells (AML12), and in vitro PTT effect was studied. In addition, the biomechanical properties of A549 cells were quantified using atomic force microscopy. This study shows the potential applications of these HNPs in fluorescence imaging, SERS detection, and PTT with good photostability and biocompatibility.     

Au@gap@AuAg Nanorod Side‐by‐Side Assemblies for Ultrasensitive SERS Detection of Mercury and its Transformation

As one of the most toxic heavy metal elements, mercury ion (Hg²⁺) and its methylated product, methylmercury (MeHg) can pose a threat to human health and the environment. Herein, a novel Raman biosensor with cascade sensitivity is developed for Hg²⁺ detection through Au@gap@AuAg nanorod side‐by‐side assemblies. Due to the strong electromagnetic coupling from the assemblies and core–shell structure, the Raman sensor possesses high sensitivity with the limit of detection (LOD) of 0.001 ng mL^‐1, which is about one order lower than traditional atomic fluorescence spectrometer (AFS) methods. Moreover, the fabricated biosensor is used to measure residual mercury levels in tissues and eggs of hens fed high‐mercury diets, and the results show total mercury in collected egg yolks is 20 times higher than whites. Furthermore, the form of mercury in the eggs is also analyzed by high‐performance liquid chromatography coupled with AFS, and, unexpectedly, the methylated product MeHg tends to only be found in egg whites. These interesting differences may indicate a new research direction for the toxicity of mercury in living organisms, and the developed ultrasensitive Surface Enhanced Raman Scattering (SERS) method could pave a broad way for the application of biosensors in Hg detection.     

Highly reproducible solid-phase extraction membrane for removal and surface-enhanced Raman scattering detection of antibiotics

A disposable solid-phase extraction (SPE) membrane was developed for rapid removal and sensitive surface-enhanced Raman scattering (SERS) detection of antibiotics in water samples. The membrane was fabricated on commercially available SPE column by filtration of the activated carbon modified with silver nanoparticles (Ag NPs/AC). The prepared SPE membrane exhibited outstanding preconcentration ability due to the high adsorption properties of AC, and excellent ability to enhance Raman signal resulting from “hot spots” between the embedded Ag NPs, improving the sensitivity of SERS detection. A detection limit (LOD) of 5.0?×?10^?11 and 1.6?×?10^?10 M was achieved for rhodamine 6G and p-aminothiophenol. In addition, the membrane exhibited high reproducibility with spot-to-spot variation in SERS spectral intensity less than 15%. Based on the membrane, the qualitative and quantitative analysis of the antibiotics in aqueous solution was accomplished with the LOD at nM level, demonstrating the feasibility of the disposable SPE membrane for in situ rapid preconcentration and detection.     

Au Dotted Magnetic Network Nanostructure and Its Application for On‐Site Monitoring Femtomolar Level Pesticide

A novel magnetically responsive and surface‐enhanced Raman spectroscopy (SERS) active nanocomposite is designed and prepared by direct grafting of Au nanoparticles onto the surface of magnetic network nanostructure (MNN) with the help of a nontoxic and environmentally friendly reagent of inositol hexakisphosphate shortly named as IP₆. The presence of IP₆ as a stabilizer and a bridging agent could weave Fe₃O₄ nanoparticles (NPs) into magnetic network nanostructure, which is easily dotted with Au nanoparticles (Au NPs). It has been shown firstly that the huge Raman enhancement of Au‐MNN is reached by an external magnetic collection. Au‐MNN presenting the large surface and high detection sensitivity enables it to exhibit multifunctional applications involving sufficient adsorption of dissolved chemical species for enrichment, separation, as well as a Raman amplifier for the analysis of trace pesticide residues at femtomolar level by a portable Raman spectrometer. Therefore, such multifunctional nanocomposites can be developed as a smart and promising nanosystem that integrates SERS approach with an easy assay for concentration by an external magnet for the effective on‐site assessments of agricultural and environmental safety.     

Performance enhancement of paper-based SERS chips by shell-isolated nanoparticle-enhanced Raman spectroscopy

Paper-based flexible surface-enhanced Raman scattering (SERS) chips have been demonstrated to have great potential for future practical applications in point-of-care testing (POCT) due to the potentials of massive fabrication, low cost, efficient sample collection and short signal acquisition time. In this work, common filter paper and Ag@SiO₂core-shell nanoparticles (NP) have been utilized to fabricate SERS chips based on shell‐isolated nanoparticle‐enhanced Raman spectroscopy (SHINERS). The SERS performance of the chips for POCT applications was systematically investigated. We used crystal violet as the model molecule to study the influence of the size of the Ag core and the thickness of the SiO₂coating layer on the SERS activity and then the morphology optimized Ag@SiO₂core-shell NPs was employed to detect thiram. By utilizing the smartphone as a miniaturized Raman spectral analyzer, high SERS sensitivity of thiram with a detection limit of 10⁻⁹M was obtained. The study on the stability of the SERS chips shows that a SiO₂shell of 3 nm can effectively protect the as-prepared SERS chips against oxidation in ambient atmosphere without seriously weakening the SERS sensitivity. Our results indicated that the SERS chips by SHINERS had great potential of practical application, such as pesticide residues detection in POCT.     

Detection of adenosine triphosphate with an aptamer biosensor based on surface-enhanced Raman scattering

A simple, ultrasensitive, highly selective, and reagent-free aptamer-based biosensor has been developed for quantitative detection of adenosine triphosphate (ATP) using surface-enhanced Raman scattering (SERS). The sensor contains a SERS probe made of gold nanostar@Raman label@SiO(2) core-shell nanoparticles in which the Raman label (malachite green isothiocyanate, MGITC) molecules are sandwiched between a gold nanostar core and a thin silica shell. Such a SERS probe brings enhanced signal and low background fluorescence, shows good water-solubility and stability, and exhibits no sign of photobleaching. The aptamer labeled with the SERS probe is designed to hybridize with the cDNA on a gold film to form a rigid duplex DNA. In the presence of ATP, the interaction between ATP and the aptamer results in the dissociation of the duplex DNA structure and thereby removal of the SERS probe from the gold film, reducing the Raman signal. The response of the SERS biosensor varies linearly with the logarithmic ATP concentration up to 2.0 nM with a limit of detection of 12.4 pM. Our work has provided an effective method for detection of small molecules with SERS.     

Surface-enhanced Raman scattering substrate of silver nanoparticles depositing on AAO template fabricated by magnetron sputtering

In this report, we describe a fabrication process of low-cost and highly sensitive SERS substrates by using a simple anodizing setup and a low-energy magnetron sputtering method. The structure of the SERS substrates consists of silver nanoparticles deposited on a layer of anodic aluminum oxide (AAO) template. The fabricated SERS substrates are investigated by a scanning electron microscope (SEM), a transmission electron microscope (TEM), and a confocal Raman spectroscope. We have verified from the surface morphology that the fabricated SERS substrates consist of high-density round-shape silver nanoparticles where their size distribution ranges from 10 to 30 nm on the top and the bottom of nanopores. The surface-enhanced Raman scattering activities of these nanostructures are demonstrated using methylene blue (MB) as probing molecules. The detection limit of 10⁻⁸ M can be achieved from this SERS substrate.     

Silver nanoparticles deposited on anodic aluminum oxide template using magnetron sputtering for surface-enhanced Raman scattering substrate

Low-cost and highly sensitive surface-enhanced Raman scattering (SERS) substrates have been fabricated by a simple anodizing process and a magnetron sputtering deposition. The substrates, which consist of silver nanoparticles embedded on anodic aluminum oxide (AAO) templates, are investigated by a scanning electron microscope and a confocal Raman spectroscopy. The SERS activities are demonstrated by Raman scattering from adsorbed solutions of methylene blue and pyridine on the SERS substrate surface. The most optimized SERS substrate contains the silver nanoparticles, with a size distribution of 10-30 nm, deposited on the AAO template. From a calculation, the SERS enhancement factor is as high as 8.5 × 10⁷, which suggests strong potentials for direct applications in the chemical detection and analyses.     

Spherical Nanoparticle Arrays with Tunable Nanogaps and Their Hydrophobicity Enhanced Rapid SERS Detection by Localized Concentration of Droplet Evaporation

Periodic hexagonal spherical nanoparticle arrays are fabricated by a sacrificial colloidal monolayer template route by chemical deposition and further physical deposition. The regular network‐structured arrays are first templated by colloidal monolayers and then they are changed to novel periodic spherical nanoparticle arrays by further sputtering deposition due to multiple direction deposition and shadow effect between adjacent nanoparticles. The nanogaps between two adjacent spherical nanoparticles can be well tuned by controlling deposition time. Such periodic nanoparticle arrays with gold coatings demonstrate a very stable and high sensitive surface‐enhanced Raman scattering spectroscopy (SERS) performance. The periodic nanoparticle arrays with 10 nm gaps display much stronger SERS enhancement due to electromagnetic coupling. The chemically modified nanoparticle arrays show good hydrophobicity, which shorten process of detecting probe molecules using them as SERS‐active substrates by localized concentration of droplet evaporation and a low detection limit of 10⁻¹² m R6G can be achieved without solution wasting in a short time. The hydrophobic substrate offers a simple, convenient, and economical method to examine SERS performance by rapid concentration of solution on it and it is highly helpful to improve its practical applications in portable Raman detecting devices to detect organic molecules.     

Surface-enhanced Raman scattering substrate of silver nanoparticles depositing on AAO template fabricated by magnetron sputtering

In this report, we describe a fabrication process of low-cost and highly sensitive SERS substrates by using a simple anodizing setup and a low-energy magnetron sputtering method. The structure of the SERS substrates consists of silver nanoparticles deposited on a layer of anodic aluminum oxide (AAO) template. The fabricated SERS substrates are investigated by a scanning electron microscope (SEM), a transmission electron microscope (TEM), and a confocal Raman spectroscope. We have verified from the surface morphology that the fabricated SERS substrates consist of high-density round-shape silver nanoparticles where their size distribution ranges from 10 to 30 nm on the top and the bottom of nanopores. The surface-enhanced Raman scattering activities of these nanostructures are demonstrated using methylene blue (MB) as probing molecules. The detection limit of 10⁻⁸ M can be achieved from this SERS substrate.     

A Droplet‐Based High‐Throughput SERS Platform on a Droplet‐Guiding‐Track‐Engraved Superhydrophobic Substrate

A novel droplet‐based surface‐enhanced Raman scattering (SERS) sensor for high‐throughput real‐time SERS monitoring is presented. The developed sensors are based on a droplet‐guiding‐track‐engraved superhydrophobic substrate covered with hierarchical SERS‐active Ag dendrites. The droplet‐guiding track with a droplet stopper is designed to manipulate the movement of a droplet on the superhydrophobic substrate. The superhydrophobic Ag dendritic substrates are fabricated through a galvanic displacement reaction and subsequent self‐assembled monolayer coating. The optimal galvanic reaction time to fabricate a SERS‐active Ag dendritic substrate for effective SERS detection is determined, with the optimized substrate exhibiting an enhancement factor of 6.3 × 10⁵. The height of the droplet stopper is optimized to control droplet motion, including moving and stopping. Based on the manipulation of individual droplets, the optimized droplet‐based real‐time SERS sensor shows high resistance to surface contaminants, and droplets containing rhodamine 6G, Nile blue A, and malachite green are successively controlled and detected without spectral interference. This noble droplet‐based SERS sensor reduces sample preparation time to a few seconds and increased detection rate to 0.5 µ L s^?1 through the simple operation mechanism of the sensor. Accordingly, our sensor enables high‐throughput real‐time molecular detection of various target analytes for real‐time chemical and biological monitoring.     

A SERS‐Assisted 3D Barcode Chip for High‐Throughput Biosensing

A surface enhanced Raman scattering (SERS)‐assisted 3D barcode chip has been developed for high‐throughput biosensing. The 3D barcode is realized through joint 2D spatial encoding with the Raman spectroscopic encoding, which stores the SERS fingerprint information in the format of a 2D array. Here, the concept of SERS‐assisted 3D barcode is demonstrated through multiplex immunoassay, where simultaneous detection of multiple targets in different samples has been achieved using a microfluidic platform. First, multiple proteins in different samples are spatially separated using a microfluidic patterned antibody barcode substrate, forming a 2D hybridization array. Then the SERS probes are used to identify and quantify the proteins. As different SERS probes are labeled with different Raman reporters, they could be employed as “SERS tags” to incorporate spectroscopic information into the 3D barcode. In this 3D barcode, the 2D spatial information helps to differentiate the samples and targets while the SERS information allows quantitative multiplex detection. It is found that the SERS‐assisted 3D barcode chip can not only accomplish one‐step multiplex detection within 30 min but also achieve an ultrasensitivity down to 10 fg mL^?1 (≈70 aM), which is expected to provide a promising tool for high‐throughput biomedical applications.     

Metal-coated magnetic nanoparticles for surface enhanced Raman scattering studies

We report the optimization and usage of surfactantless, water dispersible Ag and Au-coated g\boldsymbol\gamma–Fe₂_{\boldsymbol 2}O₃_{\boldsymbol 3} nanoparticles for applications in surface-enhanced Raman scattering (SERS). These nanoparticles, with plasmonic as well as super paramagnetic properties exhibit Raman enhancement factors of the order of 10⁶ (10⁵) for Ag (Au) coating, which are on par with the conventional Ag and Au nanoparticles. Raman markers like 2-naphthalenethiol, rhodamine-B and rhodamine-6G have been adsorbed to these nanoparticles and tested for nonresonant SERS at low concentrations. Further, to confirm the robustness of Ag-coated nanoparticles, we have performed temperature-dependent SERS in the temperature range of 77–473 K. The adsorbed molecules exhibit stable SERS spectra except at temperatures $\boldsymbol >$\boldsymbol >323 K, where the thermal desorption of test molecule (naphthalenethiol) were evident. The magnetic properties of these nanoparticles combined with SERS provide a wide range of applications.