Amide‐Catalyzed Phase‐Selective Crystallization Reduces Defect Density in Wide‐Bandgap Perovskites

Wide‐bandgap (WBG) formamidinium–cesium (FA‐Cs) lead iodide–bromide mixed perovskites are promising materials for front cells well‐matched with crystalline silicon to form tandem solar cells. They offer avenues to augment the performance of widely deployed commercial solar cells. However, phase instability, high open‐circuit voltage (V_oc) deficit, and large hysteresis limit this otherwise promising technology. Here, by controlling the crystallization of FA‐Cs WBG perovskite with the aid of a formamide cosolvent, light‐induced phase segregation and hysteresis in perovskite solar cells are suppressed. The highly polar solvent additive formamide induces direct formation of the black perovskite phase, bypassing the yellow phases, thereby reducing the density of defects in films. As a result, the optimized WBG perovskite solar cells (PSCs) (E_g ≈ 1.75 eV) exhibit a high V_oc of 1.23 V, reduced hysteresis, and a power conversion efficiency (PCE) of 17.8%. A PCE of 15.2% on 1.1 cm² solar cells, the highest among the reported efficiencies for large‐area PSCs having this bandgap is also demonstrated. These perovskites show excellent phase stability and thermal stability, as well as long‐term air stability. They maintain ≈95% of their initial PCE after 1300 h of storage in dry air without encapsulation.     

Combining Efficiency and Stability in Mixed Tin–Lead Perovskite Solar Cells by Capping Grains with an Ultrathin 2D Layer

The development of narrow-bandgap (E_g ≈ 1.2 eV) mixed tin–lead (Sn–Pb) halide perovskites enables all-perovskite tandem solar cells. Whereas pure-lead halide perovskite solar cells (PSCs) have advanced simultaneously in efficiency and stability, achieving this crucial combination remains a challenge in Sn–Pb PSCs. Here, Sn–Pb perovskite grains are anchored with ultrathin layered perovskites to overcome the efficiency-stability tradeoff. Defect passivation is achieved both on the perovskite film surface and at grain boundaries, an approach implemented by directly introducing phenethylammonium ligands in the antisolvent. This improves device operational stability and also avoids the excess formation of layered perovskites that would otherwise hinder charge transport. Sn–Pb PSCs with fill factors of 79% and a certified power conversion efficiency (PCE) of 18.95% are reported—among the highest for Sn–Pb PSCs. Using this approach, a 200-fold enhancement in device operating lifetime is achieved relative to the nonpassivated Sn–Pb PSCs under full AM1.5G illumination, and a 200 h diurnal operating time without efficiency drop is achieved under filtered AM1.5G illumination.     

Mitigating Ion Migration with an Ultrathin Self-Assembled Ionic Insulating Layer Affords Efficient and Stable Wide-Bandgap Inverted Perovskite Solar Cells

Wide-bandgap perovskite solar cells (PSCs) are attracting increasing attention because they play an irreplaceable role in tandem solar cells. Nevertheless, wide-bandgap PSCs suffer large open-circuit voltage (V_OC) loss and instability due to photoinduced halide segregation, significantly limiting their application. Herein, a bile salt (sodium glycochenodeoxycholate, GCDC, a natural product), is used to construct an ultrathin self-assembled ionic insulating layer firmly coating the perovskite film, which suppresses halide phase separation, reduces V_OC loss, and improves device stability. As a result, 1.68 eV wide-bandgap devices with an inverted structure deliver a V_OC of 1.20 V with an efficiency of 20.38%. The unencapsulated GCDC-treated devices are considerably more stable than the control devices, retaining 92% of their initial efficiency after 1392 h storage under ambient conditions and retaining 93% after heating at 65 °C for 1128 h in an N₂ atmosphere. This strategy of mitigating ion migration via anchoring a nonconductive layer provides a simple approach to achieving efficient and stable wide-bandgap PSCs.     

Precise Control of Crystallization and Phase-Transition with Green Anti-Solvent in Wide-Bandgap Perovskite Solar Cells with Open-Circuit Voltage Exceeding 1.25 V

Wide-bandgap perovskite solar cells (PSCs) have attracted a lot of attention due to their application in tandem solar cells. However, the open-circuit voltage (V_OC) of wide-bandgap PSCs is dramatically limited by high defect density existing at the interface and bulk of the perovskite film. Here, an anti-solvent optimized adduct to control perovskite crystallization strategy that reduces nonradiative recombination and minimizes V_OC deficit is proposed. Specifically, an organic solvent with similar dipole moment, isopropanol (IPA) is added into ethyl acetate (EA) anti-solvent, which is beneficial to form PbI₂ adducts with better crystalline orientation and direct formation of α-phase perovskite. As a result, EA-IPA (7-1) based 1.67 eV PSCs deliver a power conversion efficiency of 20.06% and a V_OC of 1.255 V, which is one of the remarkable values for wide-bandgap around 1.67 eV. The findings provide an effective strategy for controlling crystallization to reduce defect density in PSCs.     

Highly Efficient and Stable GABr-Modified Ideal-Bandgap (1.35 eV) Sn/Pb Perovskite Solar Cells Achieve 20.63% Efficiency with a Record Small Voc Deficit of 0.33 V

1.5–1.6 eV bandgap Pb-based perovskite solar cells (PSCs) with 30–31% theoretical efficiency limit by the Shockley–Queisser model achieve 21–24% power conversion efficiencies (PCEs). However, the best PCEs of reported ideal-bandgap (1.3–1.4 eV) Sn–Pb PSCs with a higher 33% theoretical efficiency limit are <18%, mainly because of their large open-circuit voltage (V_oc) deficits (>0.4 V). Herein, it is found that the addition of guanidinium bromide (GABr) can significantly improve the structural and photoelectric characteristics of ideal-bandgap (≈1.34 eV) Sn–Pb perovskite films. GABr introduced in the perovskite films can efficiently reduce the high defect density caused by Sn²⁺ oxidation in the perovskite, which is favorable for facilitating hole transport, decreasing charge-carrier recombination, and reducing the V_oc deficit. Therefore, the best PCE of 20.63% with a certificated efficiency of 19.8% is achieved in 1.35 eV PSCs, along with a record small V_oc deficit of 0.33 V, which is the highest PCE among all values reported to date for ideal-bandgap Sn–Pb PSCs. Moreover, the GABr-modified PSCs exhibit significantly improved environmental and thermal stability. This work represents a noteworthy step toward the fabrication of efficient and stable ideal-bandgap PSCs.     

Lead-Free Cesium Thulium Halide Perovskite Microcrystals for Near Ultraviolet Luminescence

Lead halide perovskites attract tremendous research attention due to excellent optoelectronic properties. However, realizing efficient near ultraviolet (NUV) luminescence with these materials is still a big challenge. Herein, a novel rare-earth perovskite cesium thulium chloride (CsTmCl₃) with high crystallinity has been synthesized via a simple hot-injection method. The obtained CsTmCl₃ microcrystals have a size distribution of around 1–5 µm, and demonstrate a highly efficient NUV emission at 337 nm with a full width at half maximum (FWHM) of 68 nm. The determined band gap of CsTmCl₃ microcrystals is ≈3.92 eV, which is supported by theoretical calculations. Moreover, a high photoluminescence quantum yield (PLQY) of up to 12% in NUV region has been achieved in such a lead-free perovskite. The findings suggest that CsTmCl₃ perovskite microcrystal is a promising low-toxic material for applications in NUV optoelectronic devices.     

FA‐Assistant Iodide Coordination in Organic–Inorganic Wide‐Bandgap Perovskite with Mixed Halides

Mixed‐halide wide‐bandgap perovskites are key components for the development of high‐efficiency tandem structured devices. However, mixed‐halide perovskites usually suffer from phase‐impurity and high defect density issues, where the causes are still unclear. By using in situ photoluminescence (PL) spectroscopy, it is found that in methylammonium (MA⁺)‐based mixed‐halide perovskites, MAPb(I_0.6Br_0.4)₃, the halide composition of the spin‐coated perovskite films is preferentially dominated by the bromide ions (Br^?). Additional thermal energy is required to initiate the insertion of iodide ions (I^?) to achieve the stoichiometric balance. Notably, by incorporating a small amount of formamidinium ions (FA⁺) in the precursor solution, it can effectively facilitate the I^? coordination in the perovskite framework during the spin‐coating and improve the composition homogeneity of the initial small particles. The aggregation of these homogenous small particles is found to be essential to achieve uniform and high‐crystallinity perovskite film with high Br^? content. As a result, high‐quality MA_0.9FA_0.1Pb(I_0.6Br_0.4)₃ perovskite film with a bandgap (E_g) of 1.81 eV is achieved, along with an encouraging power‐conversion‐efficiency of 17.1% and open‐circuit voltage (V_oc) of 1.21 V. This work also demonstrates the in situ PL can provide a direct observation of the dynamic of ion coordination during the perovskite crystallization.     

Goethite Quantum Dots as Multifunctional Additives for Highly Efficient and Stable Perovskite Solar Cells

Minimization of defects and ion migration in organic–inorganic lead halide perovskite films is desirable for obtaining photovoltaic devices with high power conversion efficiency (PCE) and long‐term stability. However, achieving this target is still a challenge due to the lack of efficient multifunctional passivators. Herein, to address this issue, n‐type goethite (FeOOH) quantum dots (QDs) are introduced into the perovskite light‐absorption layer for achieving efficient and stable perovskite solar cells (PSCs). It is found that the iron, oxygen, and hydroxyl of FeOOH QDs can interact with iodine, lead, and methylamine, respectively. As a result, the crystallization kinetics process can be retarded, thereby resulting in high quality perovskite films with large grain size. Meanwhile, the trap states of perovskite can be effectively passivated via interaction with the under‐coordinated metal (Pb) cations, halide (I) anions on the perovskite crystal surface. Consequently, the PSCs with FeOOH QDs achieve a high efficiency close to 20% with negligible hysteresis. Most strikingly, the long‐term stability of PSCs is significantly enhanced. Furthermore, compared with the CH₃NH₃PbI₃‐based device, a higher PCE of 21.0% is achieved for the device assembled with a Cs_0.05FA_0.81MA_0.14PbBr_0.45I_2.55 perovskite layer.     

Advances in cesium lead iodide perovskite solar cells: Processing science matters

The prevailing perovskite solar cells (PSCs) employ hybrid organic–inorganic halide perovskites as light absorbers, but these materials exhibit relatively poor environmental stability, which potentially hinders the practical deployment of PSCs. One important strategy to address this issue is replacing the volatile and hygroscopic organic cations with inorganic cesium cations in the crystal structure, forming all-inorganic halide perovskites. In this context, CsPbI₃ perovskite is drawing phenomenal attention, primarily because it exhibits an ideal bandgap of 1.7 eV for the use in tandem solar cells, and it shows significantly enhanced thermal stability that is the key to the long-term device operation. Within only half a decade, the power conversion efficiency (PCE) of CsPbI₃ PSCs has ramped beyond 20%, which has been driven by inventions of numerous processing methods for high-quality CsPbI₃ perovskite thin films. These methods are broadly classified into three categories: vapor deposition, nanocrystals assembly, and solution deposition. Herein we present a systematic review on these methods and related materials sciences. In particular, we comprehensively discuss the dimethylammonium-additive-based solution deposition, which has resulted into the best-performing CsPbI₃ PSCs. We also present the challenges and prospects on future research towards the realization of the full potential of CsPbI₃ PSCs.     

Bidirectional Anions Gathering Strategy Afford Efficient Mixed Pb?Sn Perovskite Solar Cells

Mixed lead-tin (Pb Sn) perovskite solar cells (PSCs) possess low toxicity and adjustable bandgap for both single-junction and all-perovskite tandem solar cells. However, the performance of mixed Pb Sn PSCs still lags behind the theoretical efficiency. The uncontrollable crystallization and the resulting structural defect are important reasons. Here, the bidirectional anions gathering strategy (BAG) is reported by using Methylammonium acetate (MAAc) and Methylammonium thiocyanate (MASCN) as perovskite bulk additives, which Ac⁻ escapes from the perovskite film top surface while SCN⁻ gathers at the perovskite film bottom in the crystallization process. After the optoelectronic techniques, the bidirectional anions movement caused by the top-down gradient crystallization is demonstrated. The layer-by-layer crystallization can collect anions in the next layer and gather at the broader, enabling a controllable crystallization process, thus getting a high-quality perovskite film with better phase crystallinity and lower defect concentration. As a result, PSCs treated by the BAG strategy exhibit outstanding photovoltaic and electroluminescent performance with a champion efficiency of 22.14%. Additionally, it demonstrates excellent long-term stability, which retains ≈92.8% of its initial efficiency after 4000 h aging test in the N₂ glove box.     

Protic Amine Carboxylic Acid Ionic Liquids Additives Regulate α-FAPbI3 Phase Transition for High Efficiency Perovskite Solar Cells

The α-phase formamidinium lead tri-iodide (α-FAPbI₃) has become the most promising photovoltaic absorber for perovskite solar cells (PSCs) due to its outstanding semiconductor properties and astonishing high efficiency. However, the incomplete crystallization and phase transition of α-FAPbI₃ substantially undermine the performance and stability of PSCs. In this work, a series of the protic amine carboxylic acid ion liquids are introduced as the precursor additives to efficiently regulate the crystal growth and phase transition processes of α-FAPbI₃. The MA₂Pb₃I₈·2DMSO phase is inhibited in annealing process, which remarkably optimizes the phase transition process of α-FAPbI₃. It is noted that the functional groups of carboxyl and ammonium passivate the undercoordinated lead ions, halide vacancies, and organic vacancies, eliminating the deleterious nonradiative recombination. Consequently, the small-area devices incorporated with 2% methylammonium butyrate (MAB) and 1.5% n-butylammonium formate (BAFa) in perovskite show champion efficiencies of 25.10% and 24.52%, respectively. Furthermore, the large-area modules (5 cm × 5 cm) achieve PCEs of 21.26% and 19.27% for MAB and BAFa additives, indicating the great potential for commercializing large-area PSCs.     

A Strategy toward New Low‐Dimensional Hybrid Halide Perovskites with Anionic Spacers

The low‐dimensional halide perovskites have received enormous attention due to their unique photovoltaic and optoelectronic performances. Periodic spacers are used to inhibit the growth of 3D perovskite and fabricate a 2D counterpart with layered structure, mostly based on organic/inorganic cations. Herein, by introducing organic anions (e.g., pentanedioic acid (PDA) and hexanedioic acid (HDA) simultaneously), leaf‐shaped (Cs₃Pb₂Br₅)₂(PDA–HDA) microplates with low‐dimensional structure are synthesized. They also exhibit significant photoluminescence (PL) centered at 540 nm with a narrow emission peak. The synthesis of single crystals of Pb(PDA) and Pb(HDA) allows to further clarify the crystal structure of (Cs₃Pb₂Br₅)₂(PDA–HDA) perovskite and its structural evolution mechanism. Moreover, the cooperative introduction of dicarboxylic acid pairs with appropriate lengths is thermodynamically favored for the low‐dimensional perovskite crystallization. The temperature‐dependent PL indicates a V‐shaped Stokes shift with elevated temperature that could be associated with the localization of excitons in the inorganic layers between organic dicarboxylic acid molecules. This work demonstrates low‐dimensional halide perovskite with anionic spacers, which also opens up a new approach to the growth of low‐dimensional organic–inorganic hybrid perovskite crystals.     

Extrinsic Ion Distribution Induced Field Effect in CsPbIBr2 Perovskite Solar Cells

Excellent power conversion efficiency (PCE) and stability are the primary forces that propel the all‐inorganic cesium‐based halide perovskite solar cells (PSCs) toward commercialization. However, the intrinsic high density of trap state and internal nonradiative recombination of CsPbIBr₂ perovskite film are the barriers that limit its development. In the present study, a facile additive strategy is introduced to fabricate highly efficient CsPbIBr₂ PSCs by incorporating sulfamic acid sodium salt (SAS) into the perovskite layer. The additive can control the crystallization behaviors and optimize morphology, as well as effectively passivate defects in the bulk perovskite film, thereby resulting in a high‐quality perovskite. In addition, SAS in perovskite has possibly introduced an additional internal electric field effect that favors electron transport and injection due to inhomogeneous ion distribution. A champion PCE of 10.57% (steady‐output efficiency is 9.99%) is achieved under 1 Sun illumination, which surpasses that of the contrast sample by 16.84%. The modified perovskite film also exhibits improved moisture stability. The unencapsulated device maintains over 80% initial PCE after aging for 198 h in air. The results provide a suitable additive for inorganic perovskite and introduce a new conjecture to explain the function of additives in PSCs more rationally.     

Tin and Mixed Lead–Tin Halide Perovskite Solar Cells: Progress and their Application in Tandem Solar Cells

Metal halide perovskites have recently attracted enormous attention for photovoltaic applications due to their superior optical and electrical properties. Lead (Pb) halide perovskites stand out among this material series, with a power conversion efficiency (PCE) over 25%. According to the Shockley–Queisser (SQ) limit, lead halide perovskites typically exhibit bandgaps that are not within the optimal range for single-junction solar cells. Partial or complete replacement of lead with tin (Sn) is gaining increasing research interest, due to the promise of further narrowing the bandgaps. This enables ideal solar utilization for single-junction solar cells as well as the construction of all-perovskite tandem solar cells. In addition, the usage of Sn provides a path to the fabrication of lead-free or Pb-reduced perovskite solar cells (PSCs). Recent progress in addressing the challenges of fabricating efficient Sn halide and mixed lead–tin (Pb–Sn) halide PSCs is summarized herein. Mixed Pb–Sn halide perovskites hold promise not only for higher efficiency and more stable single-junction solar cells but also for efficient all-perovskite monolithic tandem solar cells.     

Regulating Crystallization and Lead Leakage of Perovskite Solar Cell Via Novel Polyoxometalate-Based Metal–Organic Framework

Despite the unprecedented progress in lead-based perovskite solar cells (PSCs), the toxicity and leakage of lead from degraded PSCs triggered by deep-level defects and poor crystallization quality increase environmental risk and become a critical challenge for eco-friendly PSCs. Here, a novel 2D polyoxometalate (POM)-based metal–organic framework (MOF) (C₅NH₅)₄(C₃N₂H₅)₂Zn₃(H₈P₄Mo₆O₃₁)₂·2H₂O (POMOF) is ingeniously devised to address these issues. Note that the integration of POM endows POMOF with great advantages of electrical conductivity and charge mobility. Ordered POMOF induces the crystallization of high-quality perovskite film and eliminates lead-based defects to improve internal stability. The resultant PSCs achieve a superior power conversion efficiency (23.3%) accompanied by improved stability that maintains ≈90% of its original efficiency after 1600 h. Meanwhile, POMOF with phosphate groups effectively prevents lead leakage through in situ chemical anchoring and adsorption methods to reduce environmental risk. This work provides an effective strategy to minimize lead-based defects and leakage in sustainable PSCs through multi-functional POM-based MOF material.     

Methylammonium Chloride as a Double-Edged Sword for Efficient and Stable Perovskite Solar Cells

The additive engineering strategy promotes the efficiency of solution-processed perovskite solar cells (PSCs) over 25%. However, compositional heterogeneity and structural disorders occur in perovskite films with the addition of specific additives, making it imperative to understand the detrimental impact of additives on film quality and device performance. In this work, the double-edged sword effects of the methylammonium chloride (MACl) additive on the properties of methylammonium lead mixed-halide perovskite (MAPbI_3-xCl_x ) films and PSCs are demonstrated. MAPbI_3-xCl_x films suffer from undesirable morphology transition during annealing, and its impacts on the film quality including morphology, optical properties, structure, and defect evolution are systematically investigated, as well as the power conversion efficiency (PCE) evolution for related PSCs. The FAX (FA = formamidinium, X = I, Br, and Ac) post-treatment strategy is developed to inhibit the morphology transition and suppress defects by compensating for the loss of the organic components, a champion PCE of 21.49% with an impressive open-circuit voltage of 1.17 V is obtained, and remains over 95% of the initial efficiency after storing over 1200 hours. This study elucidates that understanding the additive-induced detrimental effects in halide perovskites is critical to achieve the efficient and stable PSCs.     

Highly Efficient and Stable Perovskite Solar Cells: Competitive Crystallization Strategy and Synergistic Passivation

Defects of perovskite (PVK) films are one of the main obstacles to achieving high-performance perovskite solar cells (PSCs). Here, the authors fabricated highly efficient and stable PSCs by introducing prolinamide (ProA) into the PbI₂ precursor solution, which improves the performance of PSCs by the competitive crystallization and efficient defect passivation of perovskite. The theoretical and experimental results indicate that ProA forms an adduct with PbI₂, competes with free I⁻ to coordinate with Pb²⁺, leads to the increase of the energy barrier of crystallization, and slows down the crystallization rate. Furthermore, the dual-site synergistic passivation of ProA is revealed by density functional theory (DFT) calculations and experimental results. ProA effectively reduces non-radiative recombination in the resultant films to improve the photovoltaic performance of PSCs. Notably, ProA-assisted PSCs achieve 24.61% power conversion efficiency (PCE) for the champion device and the stability of PSCs devices under ambient and thermal environments is improved.     

Carbon-based all-inorganic perovskite solar cells: Progress,challenges and strategies toward 20% efficiency

Organic-inorganic hybrid perovskite solar cells (PSCs) are promising next-generation photovoltaic technology. However, their long-term operation is limited due to thermodynamic instability of hybrid perovskites (loss of organics) and severe migration of constituents (ions and dopants). PSCs have to be free of volatile organics and mobile dopants to become commercially relevant. PSCs based on cesium lead halide inorganic perovskites (CsPbI_3−xBr_x, x = 0 ~ 3) and a carbon electrode, abbreviated here as C-IPSCs, fulfill these requirements: CsPbI_3−xBr_x is stable against decomposition to binary halides and the carbon electrode is inherently moisture-resistive and dopant-free. Since the first report of C-IPSCs in 2016, their power conversion efficiencies (PCEs) have doubled, recently reaching 14.84% with an astonishing stability of over 2000 h at 80 °C and 80% relative humidity (RH). Here we review recent progress of C-IPSCs and analyze the remaining critical issues in the field. We then offer our perspective to address these challenges through morphology, interface, spectral and material engineering. Finally, we argue that C-IPSCs have potential to overcome the 20% efficiency milestone, making them – in combination with their already impressive stability – the most promising PSC architecture for commercialization.     

Novelty All-Inorganic Titanium-Based Halide Perovskite for Highly Efficient Photocatalytic CO2 Conversion

Lead halide perovskite materials have great potential for photocatalytic reaction due to their low fabrication cost, unique optical absorption coefficient, and suitable band structures. However, the main problems are the toxicity and instability of the lead halide perovskite materials. Therefore, a facile synthetic method is used to prepare lead-free environmentally friendly Cs₂TiX₆(X = Cl, Cl_0.5Br_0.5, Br) perovskite materials. Their structural and optical characteristics are systematically investigated. The band gaps of the produced samples are illustrated to be from 1.87 to 2.73 eV. Moreover, these materials can keep high stability in harsh environments such as illumination and heating, and the Cs₂Ti(Cl_0.5Br_0.5)₆ microcrystals demonstrate the yields of 176 µmol g⁻¹ for CO and 78.9 µmol g⁻¹ for CH₄ after light irradiation for 3 h, which is of the first report of Ti-based perovskite photocatalysts. This finding demonstrates that the Ti-based perovskites will create opportunities for photocatalytic applications, which may offer a new idea to construct low-cost, eco-friendly, and bio-friendly photocatalysts.     

Suppressed Voltage Deficit and Degradation of Perovskite Solar Cells by Regulating the Mineralization of Lead Iodide

Both the uncoordinated Pb²⁺ and excess PbI₂ in perovskite film will create defects and perturb carrier collection, thus leading to the open-circuit voltage (V_OC) loss and inducing rapid performance degradation of perovskite solar cells (PSCs). Herein, an additive of 3-aminothiophene-2-carboxamide (3-AzTca) that contains amide and amino and features a large molecular size is introduced to improve the quality of perovskite film. The interplay of size effect and adequate bonding strength between 3-AzTca and uncoordinated Pb²⁺ regulates the mineralization of PbI₂ and generates low-dimensional PbI₂ phase, thereby boosting the crystallization of perovskite. The decreased defect states result in suppressed nonradiative recombination and reduced V_OC loss. The power conversion efficiency (PCE) of modified PSC is improved to 22.79% with a high V_OC of 1.22 V. Moreover, the decomposition of PbI₂ and perovskite films is also retarded, yielding enhanced device stability. This study provides an effective method to minimize the concentration of uncoordinated Pb²⁺ and improve the PCE and stability of PSCs.