A Highly Reversible,Dendrite-Free Lithium Metal Anode Enabled by a Lithium-Fluoride-Enriched Interphase

Metallic lithium is the most competitive anode material for next-generation lithium (Li)-ion batteries. However, one of its major issues is Li dendrite growth and detachment, which not only causes safety issues, but also continuously consumes electrolyte and Li, leading to low coulombic efficiency (CE) and short cycle life for Li metal batteries. Herein, the Li dendrite growth of metallic lithium anode is suppressed by forming a lithium fluoride (LiF)-enriched solid electrolyte interphase (SEI) through the lithiation of surface-fluorinated mesocarbon microbeads (MCMB-F) anodes. The robust LiF-enriched SEI with high interfacial energy to Li metal effectively promotes planar growth of Li metal on the Li surface and meanwhile prevents its vertical penetration into the LiF-enriched SEI from forming Li dendrites. At a discharge capacity of 1.2 mAh cm⁻², a high CE of >99.2% for Li plating/stripping in FEC-based electrolyte is achieved within 25 cycles. Coupling the pre-lithiated MCMB-F (Li@MCMB-F) anode with a commercial LiFePO₄ cathode at the positive/negative (P/N) capacity ratio of 1:1, the LiFePO₄//Li@MCMB-F cells can be charged/discharged at a high areal capacity of 2.4 mAh cm⁻² for 110 times at a negligible capacity decay of 0.01% per cycle.     

Progress on Lithium Dendrite Suppression Strategies from the Interior to Exterior by Hierarchical Structure Designs

Lithium (Li) metal is promising for high energy density batteries due to its low electrochemical potential (?3.04 V) and high specific capacity (3860 mAh g^?1). However, the safety issues impede the commercialization of Li anode batteries. In this work, research of hierarchical structure designs for Li anodes to suppress Li dendrite growth and alleviate volume expansion from the interior (by the 3D current collector and host matrix) to the exterior (by the artificial solid electrolyte interphase (SEI), protective layer, separator, and solid state electrolyte) is concluded. The basic principles for achieving Li dendrite and volume expansion free Li anode are summarized. Following these principles, 3D porous current collector and host matrix are designed to suppress the Li dendrite growth from the interior. Second, artificial SEI, the protective layer, and separator as well as solid‐state electrolyte are constructed to regulate the distribution of current and control the Li nucleation and deposition homogeneously for suppressing the Li dendrite growth from exterior of Li anode. Ultimately, this work puts forward that it is significant to combine the Li dendrite suppression strategies from the interior to exterior by 3D hierarchical structure designs and Li metal modification to achieve excellent cycling and safety performance of Li metal batteries.     

A Natural Biopolymer Film as a Robust Protective Layer to Effectively Stabilize Lithium‐Metal Anodes

Li metal is considered as an ideal anode for Li‐based batteries. Unfortunately, the growth of Li dendrites during cycling leads to an unstable interface, a low coulombic efficiency, and a limited cycling life. Here, a novel approach is proposed to protect the Li‐metal anode by using a uniform agarose film. This natural biopolymer film exhibits a high ionic conductivity, high elasticity, and chemical stability. These properties enable a fast Li‐ion transfer and feasiblity to accomodate the volume change of Li metal, resulting in a dendrite‐free anode and a stable interface. Morphology characterization shows that Li ions migrate through the agarose film and then deposit underneath it. A full cell with the cathode of LiFPO₄ and an anode contaning the agarose film exhibits a capacity retention of 87.1% after 500 cycles, much better than that with Li foil anode (70.9%) and Li‐deposited Cu anode (5%). This study provides a promising strategy to eliminate dendrites and enhance the cycling ability of lithium‐metal batteries through coating a robust artificial film of natural biopolymer on lithium‐metal anode.     

面向可充电电池的锂金属负极的枝晶生长:理论基础、影响因素和抑制方法

在全球能源与环境问题日趋紧迫的大背景下,可再生能源的获取与利用途径及高效安全的储能技术的研发一直是工业界和科学界关注的热点之一。锂离子二次电池作为能量存储器件,拥有高比能量、长循环寿命等优点,近十几年来其研究取得了长足进展,并在各类便携式电子设备和电动交通工具中获得了广泛应用。然而,随着各种高性能设备的不断涌现,商业化的锂离子电池越来越难以满足其在能量密度、循环稳定性和安全性等方面的要求。为了进一步提高锂离子电池的能量密度,需要开发出高比容量的负极材料(硅、锡和锂等)以取代传统石墨负极。硅、锡等新式负极材料通过与锂离子反应形成含锂化合物的原理来存储与释放锂离子,完成电池的一个充放电过程。这个过程往往伴随着负极材料体积的剧烈变化,经历较长时间循环使用后会导致负极材料的粉化甚至从集流体上剥离,引起电池容量迅速衰减甚至失效。而锂负极通过锂在负极上的溶解和沉积来完成电池的充放电过程,该过程不存在反应相变所导致的体积变化。另外,锂金属负极材料具有极高的质量比容量(3 860mAh/g)、低密度(0.59g/cm3)和低的还原电位(-3.04V,相比于氢标准电极),被认为是一种理想的可充电电池负极材料。然而,锂的枝晶生长、锂金属电池低的库伦效率和锂的无主体沉积引起的体积膨胀等一些关键问题长期以来制约着锂负极的商业应用。锂的每次沉积都会产生枝晶,在充放电循环中,锂枝晶会导致电池内部短路甚至发生爆炸,带来严重的安全问题。除此之外,锂枝晶还会增加负极表面积,新暴露的锂金属会与电解液反应生成固态电解质膜(Solid electrolyte interface,SEI),这会损耗活性材料以及降低电池的库伦效率。为了解决以上问题,研究者们对锂金属电极进行了许多探索,尤其是在锂枝晶生长的机理及其抑制方法方面。一些理论模型如扩散模型、SEI保护模型、电荷诱导生长模型和薄膜生长模型等,以及与这些模型相对应的一些抑制方法如均匀锂离子流法、SEI膜保护法、稳定沉积主体法和静电屏蔽保护法等被提出。这些抑制方法能够在一定程度上缓解锂枝晶的生长问题,但都未能达到商业化应用的要求。本文总结了近几年研究人员针对锂离子电池锂金属负极的一些重要研究,系统地介绍了业内较为认同的枝晶生长模型和影响因素,并着重叙述了抑制枝晶生长的方法及成效,最后就锂金属负极将来的研究方向给出一些建议。     

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3-Driven In Situ Polymerization of 1,3-Dioxolane

The use of poly(1,3-dioxolane) (PDOL) electrolyte for lithium batteries has gained attention due to its high ionic conductivity, low cost, and potential for large-scale applications. However, its compatibility with Li metal needs improvement to build a stable solid electrolyte interface (SEI) toward metallic Li anode for practical lithium batteries. To address this concern, this study utilized a simple InCl₃-driven strategy for polymerizing DOL and building a stable LiF/LiCl/LiIn hybrid SEI, confirmed through X-ray photoelectron spectroscopy (XPS) and cryogenic-transmission electron microscopy (Cryo-TEM). Furthermore, density functional theory (DFT) calculations and finite element simulation (FES) verify that the hybrid SEI exhibits not only excellent electron insulating properties but also fast transport properties of Li⁺. Moreover, the interfacial electric field shows an even potential distribution and larger Li⁺ flux, resulting in uniform dendrite-free Li deposition. The use of the LiF/LiCl/LiIn hybrid SEI in Li/Li symmetric batteries shows steady cycling for 2000 h, without experiencing a short circuit. The hybrid SEI also provided excellent rate performance and outstanding cycling stability in LiFePO₄/Li batteries, with a high specific capacity of 123.5 mAh g⁻¹ at 10 C rate. This study contributes to the design of high-performance solid lithium metal batteries utilizing PDOL electrolytes.     

Clay-Originated Two-Dimensional Holey Silica Separator for Dendrite-Free Lithium Metal Anode

Lithium metal anode is the ultimate choice to obtain next-generation high-energy-density lithium batteries, while the dendritic lithium growth owing to the unstable lithium anode/electrolyte interface largely limits its practical application. Separator is an important component in batteries and separator engineering is believed to be a tractable and effective way to address the above issue. Separators can play the role of ion redistributors to guide the transport of lithium ions and regulate the uniform electrodeposition of Li. The electrolyte wettability, thermal shrinkage resistance, and mechanical strength are of importance for separators. Here, clay-originated two-dimensional (2D) holey amorphous silica nanosheets (ASN) to develop a low-cost and eco-friendly inorganic separator is directly adopted. The ASN-based separator has higher porosity, better electrolyte wettability, much higher thermal resistance, larger lithium transference number, and ionic conductivity compared with commercial separator. The large amounts of holes and rich surface oxygen groups on the ASN guide the uniform distribution of lithium-ion flux. Consequently, the Li//Li cell with this separator shows stable lithium plating/stripping, and the corresponding Li//LiFePO₄, Li//LiCoO_2, and Li//NCM523 full cells also show high capacity, excellent rate performance, and outstanding cycling stability, which is much superior to that using the commercial separator.     

Ionic conductive polymers as artificial solid electrolyte interphase films in Li metal batteries – A review

Lithium (Li) metal has been considered as the ultimate anode material for next-generation rechargeable batteries due to its ultra-high theoretical specific capacity (3860 mAh g⁻¹) and the lowest reduction voltage (−3.04 V vs the standard hydrogen electrode). However, the dendritic Li formation, uncontrolled interfacial reactions, and huge volume variations lead to unstable solid electrolyte interphase (SEI) layer, low Coulombic efficiency and hence short cycling lifetime. Designing artificial solid electrolyte interphase (artificial SEI) films on the Li metal electrode exhibits great potential to solve the aforementioned problems and enable Li–metal batteries with prolonged lifetime. Polymer materials with good ionic conductivity, superior processability and high flexibility are considered as ideal artificial SEI film materials. In this review, according to the ionic conductive groups, recent advances in polymeric artificial SEI films are summarized to afford a deep understanding of Li ion plating/stripping behavior and present design principles of high-performance artificial SEI films in achieving stable Li metal electrodes. Perspectives regarding to the future research directions of polymeric artificial SEI films for Li–metal electrode are also discussed. The insights and design principles of polymeric artificial SEI films gained in the current review will be definitely useful in achieving the Li–metal batteries with improved energy density, high safety and long cycling lifetime toward next-generation energy storage devices.     

Achieving Stable Lithium Metal Anode at 50 mA cm−2 Current Density by LiCl Enriched SEI

Lithium metal batteries are intensively studied due to the potential to bring up breakthroughs in high energy density devices. However, the inevitable growth of dendrites will cause the rapid failure of battery especially under high current density. Herein, the utilization of tetrachloroethylene (C₂Cl₄) is reported as the electrolyte additive to induce the formation of the LiCl-rich solid electrolyte interphase (SEI). Because of the lower Li ion diffusion barrier of LiCl, such SEI layer can supply sufficient pathway for rapid Li ion transport, alleviate the concentration polarization at the interface and inhibit the growth of Li dendrites. Meanwhile, the C₂Cl₄ can be continuously replenished during the cycle to ensure the stability of the SEI layer. With the aid of C₂Cl₄-based electrolyte, the Li metal electrodes can maintain stable for >300 h under high current density of 50 mA cm⁻² with areal capacity of 5 mAh cm⁻², broadening the compatibility of lithium metal anode toward practical application scenarios.     

A Dual-Functional Conductive Framework Embedded with TiN-VN Heterostructures for Highly Efficient Polysulfide and Lithium Regulation toward Stable Li–S Full Batteries

Lithium–sulfur (Li–S) batteries are strongly considered as next-generation energy storage systems because of their high energy density. However, the shuttling of lithium polysulfides (LiPS), sluggish reaction kinetics, and uncontrollable Li-dendrite growth severely degrade the electrochemical performance of Li–S batteries. Herein, a dual-functional flexible free-standing carbon nanofiber conductive framework in situ embedded with TiN-VN heterostructures (TiN-VN@CNFs) as an advanced host simultaneously for both the sulfur cathode (S/TiN-VN@CNFs) and the lithium anode (Li/TiN-VN@CNFs) is designed. As cathode host, the TiN-VN@CNFs can offer synergistic function of physical confinement, chemical anchoring, and superb electrocatalysis of LiPS redox reactions. Meanwhile, the well-designed host with excellent lithiophilic feature can realize homogeneous lithium deposition for suppressing dendrite growth. Combined with these merits, the full battery (denoted as S/TiN-VN@CNFs || Li/TiN-VN@CNFs) exhibits remarkable electrochemical properties including high reversible capacity of 1110 mAh g⁻¹ after 100 cycles at 0.2 C and ultralong cycle life over 600 cycles at 2 C. Even with a high sulfur loading of 5.6 mg cm⁻², the full cell can achieve a high areal capacity of 5.5 mAh cm⁻² at 0.1 C. This work paves a new design from theoretical and experimental aspects for fabricating high-energy-density flexible Li–S full batteries.     

The Inducement and “Rejuvenation” of Li Dendrites by Space Confinement and Positive Fe/Co-Sites

The high reactivity of Li metal and the inhomogeneous Li deposition leads to the formation of Li dendrites and “dead” Li, which impedes the performance of Li metal batteries (LMBs) with high energy density. The regulating and guiding the Li dendrite nucleation is a desirable tactic to realize concentrated distribution of Li dendrites instead of completely inhibiting dendrite formation. Here, a Fe-Co-based Prussian blue analog with hollow and open framework (H-PBA) is employed to modify the commercial polypropylene separator (PP@H-PBA). This functional PP@H-PBA can guide the lithium dendrite growth to form uniform lithium deposition and activate the inactive Li. In details, the H-PBA with macroporous structure and open framework can induce the growth of lithium dendrites via space confinement, while the positive Fe/Co-sites lowered by polar cyanide (−CN) of PBA can reactivate the inactive Li. Thus, the Li|PP@H-PBA|Li symmetric cells exhibit long-term stability at 1 mA cm⁻² for 1 mAh cm⁻² over 500 h. And the Li-S batteries with PP@H-PBA deliver favorable cycling performance at 500 mA g⁻¹ for 200 cycles.     

A closed-host bi-layer dense/porous solid electrolyte interphase for enhanced lithium-metal anode stability

Thanks to its high specific capacity and low electrochemical potential, lithium metal is an ideal anode for next-generation high-energy batteries. However, the unstable heterogeneous surface of lithium gives rise to safety and efficiency concerns that prevent it from being utilized in practical applications. In this work, the formation of a closed-host bi-layer solid electrolyte interphase (SEI) improves the stability of lithium metal anode. This is successfully realized by forming an interconnected porous LiF-rich artificial SEI in contact with Li metal, and a dense, stable in-situ formed upper layer SEI. The porous layer increases the number of Li/LiF interfaces, which reduces local volume fluctuations and improves Li⁺ diffusion along these interfaces. Additionally, the tortuous porous structure guides uniform Li⁺ flux distribution and mechanically suppresses dendrite propagation. The dense upper layer of the SEI accomplishes a closed-host design, preventing continuous consumption of active materials. The duality of a dense top layer with porous bottom layer led to extended cycle life and improved rate performance, evidenced with symmetric cell testing, as well as full cell testing paired with sulfur and LiFePO₄ (LFP) cathodes. This work is a good example of a rational design of the SEI, based on comprehensive consideration of various critical factors to improve Li-metal anode stability, and highlights a new pathway to improve cycling and rate performances of Li metal batteries.     

Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries

Poor cycling stability and safety concerns regarding lithium (Li) metal anodes are two major issues preventing the commercialization of high‐energy density Li metal‐based batteries. Herein, a novel tri‐layer separator design that significantly enhances the cycling stability and safety of Li metal‐based batteries is presented. A thin, thermally stable, flexible, and hydrophilic cellulose nanofiber layer, produced using a straightforward paper‐making process, is directly laminated on each side of a plasma‐treated polyethylene (PE) separator. The 2.5 µm thick, mesoporous (≈20 nm average pore size) cellulose nanofiber layer stabilizes the Li metal anodes by generating a uniform Li⁺ flux toward the electrode through its homogenous nanochannels, leading to improved cycling stability. As the tri‐layer separator maintains its dimensional stability even at 200 °C when the internal PE layer is melted and blocks the ion transport through the separator, the separator also provides an effective thermal shutdown function. The present nanocellulose‐based tri‐layer separator design thus significantly facilitates the realization of high‐energy density Li metal‐based batteries.     

A Novel Organic “Polyurea” Thin Film for Ultralong‐Life Lithium‐Metal Anodes via Molecular‐Layer Deposition

Metallic Li is considered as one of the most promising anode materials for next‐generation batteries due to its high theoretical capacity and low electrochemical potential. However, its commercialization has been impeded by the severe safety issues associated with Li‐dendrite growth. Non‐uniform Li‐ion flux on the Li‐metal surface and the formation of unstable solid electrolyte interphase (SEI) during the Li plating/stripping process lead to the growth of dendritic and mossy Li structures that deteriorate the cycling performance and can cause short‐circuits. Herein, an ultrathin polymer film of “polyurea” as an artificial SEI layer for Li‐metal anodes via molecular‐layer deposition (MLD) is reported. Abundant polar groups in polyurea can redistribute the Li‐ion flux and lead to a uniform plating/stripping process. As a result, the dendritic Li growth during cycling is efficiently suppressed and the life span is significantly prolonged (three times longer than bare Li at a current density of 3 mA cm^?2). Moreover, the detailed surface and interfacial chemistry of Li metal are studied comprehensively. This work provides deep insights into the design of artificial SEI coatings for Li metal and progress toward realizing next‐generation Li‐metal batteries.     

Tuning the Solid Electrolyte Interphase for Selective Li‐ and Na‐Ion Storage in Hard Carbon

Solid‐electrolyte interphase (SEI) films with controllable properties are highly desirable for improving battery performance. In this paper, a combined experimental and theoretical approach is used to study SEI films formed on hard carbon in Li‐ and Na‐ion batteries. It is shown that a stable SEI layer can be designed by precycling an electrode in a desired Li‐ or Na‐based electrolyte, and that ionic transport can be kinetically controlled. Selective Li‐ and Na‐based SEI membranes are produced using Li‐ or Na‐based electrolytes, respectively. The Na‐based SEI allows easy transport of Li ions, while the Li‐based SEI shuts off Na‐ion transport. Na‐ion storage can be manipulated by tuning the SEI layer with film‐forming electrolyte additives, or by preforming an SEI layer on the electrode surface. The Na specific capacity can be controlled to < 25 mAh g^?1; ≈ 1/10 of the normal capacity (250 mAh g^?1). Unusual selective/preferential transport of Li ions is demonstrated by preforming an SEI layer on the electrode surface and corroborated with a mixed electrolyte. This work may provide new guidance for preparing good ion‐selective conductors using electrochemical approaches.     

The Synergetic Effect of Lithium Bisoxalatodifluorophosphate and Fluoroethylene Carbonate on Dendrite Suppression for Fast Charging Lithium Metal Batteries

Fluorinated solid‐electrolyte interphase (SEI) derived from fluoroethylene carbonate (FEC) is particularly favored for dendrite suppression in lithium metal batteries because of the high Young's modulus (≈64.9 Gpa) and low electronic conductivity (10^?31 S cm^?1) of LiF. However, the transportation ability of Li⁺ in this fluorinated SEI under high current densities is limited by the low ionic conductivity of LiF (≈10^?12 S cm^?1). Herein, by rational design, 0.1 m lithium bisoxalatodifluorophosphate (LiDFBOP) is adopted to modify fluorinated SEI in FEC based electrolyte for fast charging lithium metal batteries. Benefiting from the synergetic effect of LiDFBOP and FEC, a fluorinated SEI rich in LiF and Li_xPO_yF_z species can be yielded, which can further improve the stability and ionic conductivity of SEI for fast Li⁺ transportation. Meanwhile, the average coulombic efficiency for Li plating/stripping is improved from 92.0% to 96.7%, thus promoting stable cycling of Li||Li symmetrical batteries with dendrite free morphologies, even at high current densities (3.0 mA cm^?2) and high plating/stripping capacities (3.0 mAh cm^?2). More attractively, in practical Li||LiNi_0.6Co_0.2Mn_0.2O₂ batteries, the cycling life at 1C and rate capacities at 6C are also significantly improved. Therefore, the synergetic effect of LiDFBOP and FEC provides great potential for achieving advanced lithium metal batteries with fast charging ability.     

Protecting the Li‐Metal Anode in a Li–O2 Battery by using Boric Acid as an SEI‐Forming Additive

The Li–O₂ battery (LOB) is considered as a promising next‐generation energy storage device because of its high theoretic specific energy. To make a practical rechargeable LOB, it is necessary to ensure the stability of the Li anode in an oxygen atmosphere, which is extremely challenging. In this work, an effective Li‐anode protection strategy is reported by using boric acid (BA) as a solid electrolyte interface (SEI) forming additive. With the assistance of BA, a continuous and compact SEI film is formed on the Li‐metal surface in an oxygen atmosphere, which can significantly reduce unwanted side reactions and suppress the growth of Li dendrites. Such an SEI film mainly consists of nanocrystalline lithium borates connected with amorphous borates, carbonates, fluorides, and some organic compounds. It is ionically conductive and mechanically stronger than conventional SEI layer in common Li‐metal‐based batteries. With these benefits, the cycle life of LOB is elongated more than sixfold.     

Overcoming the Interfacial Limitations Imposed by the Solid–Solid Interface in Solid‐State Batteries Using Ionic Liquid‐Based Interlayers

Li‐garnets are promising inorganic ceramic solid electrolytes for lithium metal batteries, showing good electrochemical stability with Li anode. However, their brittle and stiff nature restricts their intimate contact with both the electrodes, hence presenting high interfacial resistance to the ionic mobility. To address this issue, a strategy employing ionic liquid electrolyte (ILE) thin interlayers at the electrodes/electrolyte interfaces is adopted, which helps overcome the barrier for ion transport. The chemically stable ILE improves the electrodes‐solid electrolyte contact, significantly reducing the interfacial resistance at both the positive and negative electrodes interfaces. This results in the more homogeneous deposition of metallic lithium at the negative electrode, suppressing the dendrite growth across the solid electrolyte even at high current densities of 0.3 mA cm^?2. Further, the improved interface Li/electrolyte interface results in decreasing the overpotential of symmetric Li/Li cells from 1.35 to 0.35 V. The ILE modified Li/LLZO/LFP cells stacked either in monopolar or bipolar configurations show excellent electrochemical performance. In particular, the bipolar cell operates at a high voltage (≈8 V) and delivers specific capacity as high as 145 mAh g^?1 with a coulombic efficiency greater than 99%.     

Dendrite‐Free Lithium Deposition via a Superfilling Mechanism for High‐Performance Li‐Metal Batteries

Uncontrollable Li dendrite growth and low Coulombic efficiency severely hinder the application of lithium metal batteries. Although a lot of approaches have been developed to control Li deposition, most of them are based on inhibiting lithium deposition on protrusions, which can suppress Li dendrite growth at low current density, but is inefficient for practical battery applications, with high current density and large area capacity. Here, a novel leveling mechanism based on accelerating Li growth in concave fashion is proposed, which enables uniform and dendrite‐free Li plating by simply adding thiourea into the electrolyte. The small thiourea molecules can be absorbed on the Li metal surface and promote Li growth with a superfilling effect. With 0.02 m thiourea added in the electrolyte, Li | Li symmetrical cells can be cycled over 1000 cycles at 5.0 mA cm^?2, and a full cell with LiFePO₄ | Li configuration can even maintain 90% capacity after 650 cycles at 5.0 C. The superfilling effect is also verified by computational chemistry and numerical simulation, and can be expanded to a series of small chemicals using as electrolyte additives. It offers a new avenue to dendrite‐free lithium deposition and may also be expanded to other battery chemistries.     

A Polymer‐Reinforced SEI Layer Induced by a Cyclic Carbonate‐Based Polymer Electrolyte Boosting 4.45 V LiCoO2/Li Metal Batteries

Lithium (Li) metal batteries (LMBs) are enjoying a renaissance due to the high energy densities. However, they still suffer from the problem of uncontrollable Li dendrite and pulverization caused by continuous cracking of solid electrolyte interphase (SEI) layers. To address these issues, developing spontaneously built robust polymer‐reinforced SEI layers during electrochemical conditioning can be a simple yet effective solution. Herein, a robust homopolymer of cyclic carbonate urethane methacrylate is presented as the polymer matrix through an in situ polymerization method, in which cyclic carbonate units can participate in building a stable polymer‐integrated SEI layer during cycling. The as‐investigated gel polymer electrolyte (GPE) assembled LiCoO₂/Li metal batteries exhibit a fantastic cyclability with a capacity retention of 92% after 200 cycles at 0.5 C (1 C = 180 mAh g^?1), evidently exceeding that of the counterpart using liquid electrolytes. It is noted that the anionic ring‐opening polymerization of the cyclic carbonate units on the polymer close to the Li metal anodes enables a mechanically reinforced SEI layer, thus rendering excellent compatibility with Li anodes. The in situ formed polymer‐reinforced SEI layers afford a splendid strategy for developing high voltage resistant GPEs compatible with Li metal anodes toward high energy LMBs.     

Effective Suppression of Lithium Dendrite Growth Using a Flexible Single‐Ion Conducting Polymer Electrolyte

A novel single‐ion conducting polymer electrolyte (SIPE) membrane with high lithium‐ion transference number, good mechanical strength, and excellent ionic conductivity is designed and synthesized by facile coupling of lithium bis(allylmalonato) borate (LiBAMB), pentaerythritol tetrakis (2‐mercaptoacetate) (PETMP) and 3,6‐dioxa‐1,8‐octanedithiol (DODT) in an electrospun poly(vinylidienefluoride) (PVDF) supporting membrane via a one‐step photoinitiated in situ thiol–ene click reaction. The structure‐optimized LiBAMB‐PETMP‐DODT (LPD)@PVDF SIPE shows an outstanding ionic conductivity of 1.32 × 10^?3 S cm^?1 at 25 °C, together with a high lithium‐ion transference number of 0.92 and wide electrochemical window up to 6.0 V. The SIPE exhibits high tensile strength of 7.2 MPa and elongation at break of 269%. Due to these superior performances, the SIPE can suppress lithium dendrite growth, which is confirmed by galvanostatic Li plating/stripping cycling test and analysis of morphology of Li metal electrode surface after cycling test. Li|LPD@PVDF|Li symmetric cell maintains an extremely stable and low overpotential without short circuiting over the 1050 h cycle. The Li|LPD@PVDF|LiFePO₄ cell shows excellent rate capacity and outstanding cycle performance compared to cells based on a conventional liquid electrolyte (LE) with Celgard separator. The facile approach of the SIPE provides an effective and promising electrolyte for safe, long‐life, and high‐rate lithium metal batteries.