Single-phased emission-tunable Ca3Si2O7:Ce,Eu phosphors for white light-emitting diodes

A series of single-phased emission-tunable Ca₃Si₂O₇:Ce³⁺, Eu²⁺ phosphors has been prepared by the solid-state reaction method. The phosphors show two intense emission bands at about 450 nm and 610 nm, which are attributed to the 5d→4f transitions of Ce³⁺ and Eu²⁺ ions, respectively. The emission colors of Ca₃Si₂O₇:Ce³⁺, Eu²⁺ phosphors vary from blue (0.148, 0.147) to white (0.309, 0.260), and eventually to orange (0.407, 0.319) by tuning the Eu²⁺/Ce³⁺ ratio. Energy transfer from Ce³⁺ to Eu²⁺ is studied by luminescence spectra and energy transfer efficiency. The results show an electric quadrupole–quadrupole interaction plays an important role in the process of energy transfer. The phosphors with tunable emission are suitable for application in white light-emitting diodes.     

Cathodoluminescence and thermoluminescence of ZnB2O4:Eu3+ phosphors prepared via wet-chemical synthesis

In present work, a series of Eu doped zinc borate, ZnB₂O₄, phosphors prepared via wet chemical synthesis and their structural, surface morphology, cathodoluminescence (CL) and thermoluminescence (TL) properties have been studied. Phase purity and crystal structure of as-prepared samples are confirmed by X-ray diffraction measurements (XRD) and they were well consistent with PDF card No. 39-1126, indicating the formation of pure phase. The thermoluminescence (TL) behaviors of Eu activated ZnB₂O₄ host lattice are studied for various beta doses ranging from 0.1 to 10?Gy. The high-temperature peak of Eu activated sample located at 192?°C exhibited a linear dose response in the range of 0.1–10?Gy. Initial rise (IR) and peak shape (PS) methods were used to determine the activation energies of the trapping centres. The effects of the variable heating rate on TL behaviour of Eu activated ZnB₂O₄ were also studied. When excited using an electron beam induced light emission (i.e cathodoluminescence, CL) at room temperature (RT), the as-prepared phosphors generate reddish-orange color due to predominant emission peaks of Eu³⁺ ions located at 576–710?nm assigned to the ⁵D₀→⁷F_J (J=1,2,3, and 4) transitions. The maximum CL intensity for Eu³⁺ ions at 614?nm with transition ⁵D₀→⁷F₂ was reached Eu³⁺ concentration of 5?mol%; quenching occurred at higher concentrations. Strong emission peak for Eu³⁺ ions at 614?nm with transition ⁵D₀→⁷F₂ is observed. The CL experimental data indicate that ZnB₂O₄:Eu³⁺ phosphor as an orange-red emitting phosphor may be promising luminescence materials for the optoelectronic applications.     

Dazzling cool white light emission from Ce3+/Sm3+ activated LBZ glasses for W-LED applications

We synthesized a batch of co-doped (Ce³⁺+Sm³⁺): LBZ glass specimens by melt quenching process and their structural and radiation properties were studied by employing XRD, FE-SEM, optical absorption, photoluminescence and lifetime measurements. UV–Vis–NIR absorption studies of the co-doped (Ce³⁺+Sm³⁺): LBZ glassy matrix displays pertinent bands of both Ce³⁺ and Sm³⁺ ions. Individually doped Sm³⁺: LBZ glass exhibit bright orange emission at 603?nm (⁴G_5/2 → ⁶H_7/2) under the excitation of 403?nm. Nevertheless, the luminescence intensities pertaining to Sm³⁺ were extraordinarily increased by co-doping with Ce³⁺ ions to Sm³⁺: LBZ glassy matrices because of energy transfer from Ce³⁺ to Sm³⁺. The fluorescence spectra of co-doped (Ce³⁺+Sm³⁺): LBZ exhibits characteristic emission bands of Ce³⁺ (441?nm, blue) and Sm³⁺ (603?nm, reddish orange) under the excitation of 362?nm. Decay curves of Ce³⁺ and Sm³⁺ ions in co-doped glass has been fitted to double exponential nature. The decreasing lifetime of donor ion and rising lifetime of acceptor ion in double doped glass could support the energy transfer from Ce³⁺ to Sm³⁺ ions in the host matrix. The CIE coordinates and CCT values were calculated for all the obtained co-doped glassy samples from their luminescence spectra. By adding Ce³⁺ ions to individually doped Sm³⁺: LBZ glass matrix, the emitting color changes from reddish orange to white light which resembles the energy transfer from Ce³⁺ to Sm³⁺ ions. These studies, perhaps implied that attained co-doped (Ce³⁺+Sm³⁺): LBZ glassy samples are potential materials for white lighting appliances.     

Spectroscopic investigations on high efficiency deep red-emitting Ca2SiO4:Eu3+ phosphors synthesized from agricultural waste

Europium doped calcium orthosilicate (Ca₂SiO₄) phosphors have been synthesized by the conventional high temperature solid-state reaction method in various concentrations from agricultural waste (egg shell as a CaO and rice husk as a SiO₂). These phosphors structure from X-ray diffraction and morphology from scanning electron microscopy have been examined. Concentration dependent Eu³⁺ ions luminescent properties in Ca₂SiO₄ phosphors have been studied from the excitation, emission and decay curves analysis. The ⁵D₀ → ⁷F_J transitions observed in luminescence spectrum allows to determine the site symmetry of the Eu³⁺ ion. A charge transfer band (CTB) at around 260?nm which is due to the Eu–O interaction in the host along with the 4f – 4f excitation bands due to Eu³⁺ ions in UV and blue regions are observed. The color co-ordinates determined from emission spectra varies with concentrations of Eu³⁺ ions and are found to fall in the red region. The decay curves show single exponential behavior for all concentrations of Eu³⁺ ions (0.01–0.4?mol%) and the lifetimes varied from 2.67 to 2.78?ms. It is worth noting that the present material is found to be far better than many red phosphors synthesized by using agricultural waste as raw materials.     

Enhanced Light Storage of SrAl2O4 Glass‐Ceramics Controlled by Selective Europium Reduction

A luminescent Eu, Dy: SrAl₂O₄ glass‐ceramics with high transparency in the visible region was successfully synthesized using the frozen sorbet technique with the control of O₂ partial pressure () for the oxidation of Eu²⁺ ions. The glass‐ceramics include Eu²⁺, Eu³⁺, and Dy³⁺ ions, and thus exhibits three characteristic types of emission bands, 4f–5d at around 520 nm (Eu²⁺ ions), 4f–4f at 610 nm (Eu³⁺ ions), and 480 nm (Dy³⁺ ions). The Eu, Dy: SrAl₂O₄ glass‐ceramics provide remarkable long‐persistent luminescence under dark condition. The glass‐ceramics also exhibits color‐changing luminescence in the visible region based on their remarkable light storage properties. The luminescent Eu, Dy: SrAl₂O₄ glass‐ceramics using the frozen sorbet technique with control of are promising materials for application in novel photonic and light storage materials.     

Impact of Eu3+ Dopants on Optical Spectroscopy of Ce3+: Y3Al5O12‐Embedded Transparent Glass‐Ceramics

Transparent glass‐ceramics containing Ce³⁺: Y₃Al₅O₁₂ phosphors and Eu³⁺ ions were successfully fabricated by a low‐temperature co‐sintering technique to explore their potential application in white light‐emitting diodes (WLEDs). Microstructure of the sample was studied using a scanning electron microscope equipped with an energy dispersive X‐ray spectroscopy. The impact of co‐sintering temperature, Ce³⁺: Y₃Al₅O₁₂ crystal content and Eu³⁺ doping content on optical properties of glass‐ceramics were systematically studied by emission, excitation spectra, and decay curves. Notably, the spatial separation of these two different activators in the present glass‐ceramics, where Ce³⁺ ions located in YAG crystalline phase while the Eu³⁺ ones stayed in glass matrix, is advantageous to the realization of both intense yellow emission assigned to Ce³⁺: 5d→4f transition and red luminescence originating from Eu³⁺: 4f→4f transitions. As a result, the quantum yield of the glass‐ceramic reached as high as 93%, and the constructed WLEDs exhibited an optimal luminous efficacy of 122 lm/W, correlated color temperature of 6532 K and color rendering index of 75.     

Characterization of luminescent SrAl2O4 films doped with terbium and europium ions deposited by ultrasonic spray pyrolysis technique

SrAl₂O₄, SrAl₂O₄:Tb³⁺ and SrAl₂O₄:Eu³⁺:Eu²⁺ films were synthesized by means of the ultrasonic spray pyrolysis technique. These samples, characterized by X-Ray Diffraction, showed the monoclinic phase of the strontium aluminate. Images of the surface morphology of these films were obtained by SEM and the chemical composition was measured by EDS and XPS. The photoluminescence and cathodoluminescence characteristics of the films were studied as a function of the terbium and europium concentrations. The optimal PL emission intensities were reached at 8?at% for terbium doped films and 6?at% for europium doped samples. The CL emission spectra for europium doped films showed the typical bands of Eu³⁺ ions and also a broadband centered at 525?nm which is attributed to Eu²⁺ ions. XPS measurements confirm the presence of Eu³⁺ and Eu²⁺ in europium doped SrAl₂O₄ films, without having been subjected to a reducing atmosphere. Chromatic diagrams exhibited green color for SrAl₂O₄:Tb³⁺ films, red and yellow colors for SrAl₂O₄:Eu³⁺:Eu²⁺ films. The PL decay curves were also obtained: the averaged decay time was 2.7?ms for SrAl₂O₄:Tb³⁺ films and 1.9?ms for SrAl₂O₄:Eu³⁺ films. Similar results were obtained by the stretched exponential model.     

Preparation of Ca4Mg5(PO4)6:Eu,Mn phosphor and its photoluminescence properties

Eu²⁺ and Mn²⁺ singly doped and Eu²⁺/Mn²⁺-codoped Ca₄Mg₅(PO₄)₆ phosphors were synthesized via combustion synthesis. Mn²⁺-singly doped Ca₄Mg₅(PO₄)₆ phosphor exhibits a single red emission in the wavelength range of 500–700 nm due to the ⁴T₁(⁴G)→⁶A₁(⁶S) transition of Mn²⁺. Eu²⁺/Mn²⁺ co-doped phosphor emits two distinctive luminescence bands: a blue one centered at 442 nm originating from Eu²⁺ and a broad red-emitting one peaked at 609 nm from Mn²⁺. Energy transfers from Eu²⁺ to Mn²⁺ were discovered by directly observing significant overlap of the excitation spectrum of Mn²⁺ and the emission spectrum of Eu²⁺ as well as the systematic relative decline and growth of emission bands of Eu²⁺ and Mn²⁺, respectively. Based on the principle of energy transfer, the relative intensities of blue and red emission could be tuned by adjusting the contents of Eu²⁺ and Mn²⁺.     

Tunable Emission Phosphor Ca4Y6O(SiO4)6:Ce3+, Eu2+: Luminescence and Energy Transfer

A series of Ca_4–yY_6–xO(SiO₄)₆: xCe³⁺, yEu²⁺ samples are synthesized by a high‐temperature solid‐state method. Under 356 nm excitation, Ca₄Y₆O(SiO₄)₆:Ce³⁺ presents a strong blue emission band at 426 nm which are assigned to 4f⁰5d¹→4f¹ transition of Ce³⁺ ion. Ca₄Y₆O(SiO₄)₆:Eu²⁺ shows green emission under 380 nm radiation excitation, and the peak locates at 527 nm which is mainly due to transitions of Eu²⁺ from 4f⁷ ground state to 4f⁶5d¹ excited state. Under 356 nm excitation, a remarkable energy transfer from Ce³⁺ to Eu²⁺ exists in Ca₄Y₆O(SiO₄)₆, and the result reveals that the mechanism of energy transfer is a resonant type via a nonradiative dipole–dipole interaction. The hues of Ca₄Y₆O(SiO₄)₆:Ce³⁺, Eu²⁺ can be adjusted by the energy transfer from Ce³⁺ to Eu²⁺ ions, and a white emission can be achieved by tuning the ratio of Ce³⁺ to Eu²⁺. The results mean that Ce³⁺ may be the effective sensitizer for Eu²⁺‐doped Ca₄Y₆O(SiO₄)₆.     

Structure and luminescent properties of oxyfluoride glass-ceramics with YF3:Eu3+ nanocrystals derived by sol-gel method

In this paper, the transparent oxyfluoride glass-ceramic materials containing YF₃:Eu³⁺ nanocrystals were fabricated via controlled ceramization of precursor xerogels at relatively low temperature T = 350 °C. The formation of YF₃ nanocrystalline phase from Y(CF₃COO)₃ was verified based on X-ray diffraction (XRD) measurements as well as high-resolution transmittance electron microscopy (HR-TEM). Based on IR-ATR spectroscopy the functional groups inside sol-gel structures were identified. The optical properties of Eu³⁺ ions in fabricated sol-gel samples were investigated based on photoluminescence excitation and emission spectra as well as luminescence decay analysis of the ⁵D₀ excited level. Upon excitation at near-UV illumination, λ_exc = 393 nm, the series of 4f⁶-4f⁶ photoluminescence bands of Eu³⁺ ions in reddish-orange light area were recorded. The Stark splitting of photoluminescence bands, double-exponential character of decay curves and long-lived emission for fabricated glass-ceramic samples clearly evidenced the partial substitution of Y³⁺ by optically active Eu³⁺ ions in precipitated YF₃ nanocrystals. Indeed, it was identified that applied annealing conditions resulted in significant, almost 34-fold prolongation of luminescence lifetime from 0.24 ms (Eu³⁺ ions in xerogel host) up to 8.14 ms (Eu³⁺ ions incorporated into YF₃ nanocrystals). It was also observed a clear correlation between identified phonon energies from IR measurements and luminescence behavior of Eu³⁺ ions.     

Color-tunable properties based on complex anion substitution in Eu2+ doped Ca8Sc2(PO4)6-y(SiO4)1+y phosphor

We synthesized and investigated the effect of Eu²⁺ ions doping in a novel phosphor-silicate Ca₈Sc₂(PO₄)₆(SiO₄) phosphor. The structure and photoluminescence properties were determined by X-ray powder diffraction Rietveld refinement, diffuse reflection spectra, emission-excitation spectra, decay curves and temperature dependence spectra. The phosphors showed an asymmetric broad-band blue emission (Eu²⁺) with peak at 470?nm. Furthermore, we presented the Ca_7.96Sc₂(PO₄)_6-y(SiO₄)_1+y:0.04Eu²⁺ phosphors by co-substituting [Eu²⁺-Si⁴⁺] for [Ca²⁺-P⁵⁺], and different behaviors of luminescence evolution in response to structural variation were verified among the series of phosphors. The results were attributed to the presence of multi Ca²⁺ sites, resulting in the mixing of blue and green emissions for Eu²⁺ ions. The complex anion substitution of [PO₄]^3- by [SiO₄]^4- induced an increased crystal field splitting of the Eu²⁺ ions, which caused a decrease in emission energy from the 5d excited state to the 4f ground state and a resultant red-shift from 470?nm to 520?nm. All the properties indicated that the Ca₈Sc₂(PO₄)₆(SiO₄):Eu²⁺ phosphors have potential application for color-tunable WLEDs.     

Luminescence performance of yttrium-stabilized zirconia ceramics doped with Eu3+ ions fabricated by Spark Plasma Sintering technique

Yttrium stabilized zirconia (YSZ) ceramics doped with Eu³⁺ ions have been successfully fabricated by Spark Plasma Sintering (SPS) technique. The influence of the europium concentration and post-annealing process on the structural, optical, and luminescent properties of the ceramics has been studied. It is shown that an increase in the europium concentration from 0.1 to 3 wt% does not lead to significant changes in the transmission spectra. However, annealing in air atmosphere at temperature from 700 °C to 1300 °C significantly affects the transmission spectrum, as a possible consequenceofthe formation of oxygen vacancy defects. The analysis of the photoexcitation and photoluminescence spectra showed that the main excitation bands are determined by direct excitation of the ⁷F₀ ground state of Eu³⁺ions to the higher 4f energy levels with further radiation transitionsfrom these states. Moreover, the europium ion in the obtained ceramics occupy low-symmetry sites without inversion center.The luminescence decay kineticsare described by a doubleexponential function with decay time τ₁ ~ 20 ns and τ₂~ 90 ns for intrinsic emission centers and millisecond (τ ~ 1.4 ms) for Eu³⁺emission, for all investigated ceramics. The luminescence spectra in nanosecond time region are characteristic for yttrium-stabilized zirconia and are caused by oxygen vacancies in the presence of heavy cations (Y³⁺ and Eu³⁺).     

The doping concentration dependent tunable yellow luminescence of Sr5(PO4)2(SiO4):Eu

Color tunable yellow-emitting phosphors of Sr_5−5xEu_5x(PO₄)₂SiO₄ (x = 0.05-0.15) were prepared by conventional solid-state reaction method. The X-ray powder diffraction patterns, the photoluminescence excitation and emission spectra were measured. The main excitation bands of the phosphors locate at a broad band extending from 300 to 500 nm, which can match the emission of ultraviolet- and blue-emitting diode chips. The tunable luminescence color was realized by the changing Eu²⁺ doping in Sr₅(PO₄)₂SiO₄. The structure and luminescence properties were investigated. Sr_5−5x(PO₄)₂SiO₄:Eu_5x displays two typical luminescence centers, which originate from two different Sr²⁺ (Eu²⁺) sites in the host. The site-occupation, the luminescence intensity and energy transfer between the Eu²⁺ ions occupying two different crystallographic Sr²⁺ sites were discussed on the base of the luminescence spectra and crystal structure. This is helpful to improve this phosphor for a potential application as a white light emitting diode phosphor.     

Tunable luminescence properties and efficient energy transfer in Eu,Mn co-doped Ba2MgP4O13

A series of Ba₂Mg_1−xMn_xP₄O₁₃ (x = 0-1.0) and Ba_1.94Eu_0.06Mg_1−xMn_xP₄O₁₃ (x = 0-0.15) phosphors were prepared by conventional solid-state reaction. X-ray powder diffraction (XRD), the photoluminescence spectra, and the decay curves are investigated. XRD analysis shows that the maximum tolerable substitution of Mn²⁺ for Mg is about 50 mol% in Ba₂MgP₄O₁₃. Mn²⁺-singly doped Ba₂MgP₄O₁₃ shows weak red-luminescence peaked at about 615 nm. The Eu²⁺/Mn²⁺ co-doped phosphor emits two distinctive luminescence bands: a blue one centered at 430 nm originating from Eu²⁺ and a broad red-emitting one peaked at 615 nm from Mn²⁺ ions. The luminescence of Mn²⁺ ions can be greatly enhanced with the co-doping of Eu²⁺ in Ba₂MgP₄O₁₃. The efficient energy transfer from Eu²⁺ to Mn²⁺ is verified by the excitation and emission spectra together with the luminescence decay curves. The emission colors could be tuned from the blue to the red-purple and eventually to the deep red. The resonance-type energy transfer via a dipole-quadrupole interaction mechanism is supported by the decay lifetime data. The energy transfer efficiency and the critical distance are calculated and discussed. The temperature dependent luminescence spectra of the Eu²⁺/Mn²⁺ co-doped phosphor show a good thermal stability on quenching effect.     

Preparation and characterizations of Pr3+:CaF2 transparent ceramics with different doping concentrations

0.2–5.0?at% Pr³⁺-doped CaF₂ transparent ceramics were fabricated by hot-pressed processing for the first time. The phase compositions, microstructure and optical characteristics of the presented transparent ceramics were examined systematically. The average in-line transmittance of Pr:CaF₂ transparent ceramics (2.0?mm thick) with high Pr³⁺ doping concentrations (1.0–5.0?at%) exceeds 86% at the wavelength of 1200?nm. The absorption spectrum manifests that the prepared Pr:CaF₂ transparent ceramics contain some absorption peaks overlapped with emission bands of the commercial InGaN laser diodes. Further, a detailed investigation on the visible emission properties as a function of Pr³⁺ concentrations in CaF₂ transparent ceramics was reported. The emission spectra presented two main characteristic peaks at 496?nm (bluish green) and 656?nm (red) corresponded to the transitions of ³P₀→³H₄ and ³P₀→³F₂ for Pr³⁺ activator ions. With the increase of the Pr³⁺ doping concentrations, the emission intensity and decay lifetimes decreased generally attributed to the concentration quenching effect. Details on energy transfer mechanism of Pr³⁺ in CaF₂ transparent ceramics were demonstrated and discussed.     

Eu3+-doped transparent potassium lanthanum silicate (KLaSiO4) glass-ceramic nanocomposites: Synthesis,properties and application

The preparation of Eu³⁺-doped novel K₂O-La₂O₃-Al₂O₃-SiO₂ (KLAS)-based glass and transparent KLS (KLaSiO₄) glass–ceramic (GC) nanocomposites is reported. Nanostructures of the transparent GCs were analyzed by FE-SEM, H(R)-TEM and SAED techniques. The average size of the crystallites is calculated using XRD data and found to be in the range 13–19?nm which is matched well with the average particle size observed from TEM images in the range 5–18?nm. Photoluminescence spectra of Eu³⁺ ions exhibit emission transitions of ⁵D₀?→?⁷F_j (j?=?0 and 1–4) under the excitation at 394?nm. The emission spectra reveals up to 3-fold enhancement of luminescence performance of the KLS GC nanocomposites compared to as-prepared glass. This enhancement is caused due to entering of Eu³⁺ ions into the KLS crystal sites by replacing the La³⁺ ions. Such luminescence properties of KLS glass-ceramic nanocomposites could be a promising candidate as laser host for many laser devices.     

Highly thermal stable and color tunable composite fluorescent ceramics for high-power white LEDs

All-inorganic fluorescent materials with high luminescence efficiency, high thermal stability and adjustable spectrum are urgently needed, especially for high-power white LEDs. In this work, Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺ fluorescent ceramics were prepared firstly by vacuum sintering technology, and then Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺/SrAlSiN₃: Eu²⁺ composite fluorescent ceramics were synthesized by technology screen-printing and laser ablation. Under 460 nm excitation, the composite fluorescent ceramic exhibits a broad emission band from 500 nm to 675 nm, which is attributed to the 5d → 4f transitions of Ce³⁺ and Eu²⁺ ions, respectively. By controlling the screen-printed times, the color coordinates of the composite fluorescent ceramics could be tuned from (0.3125, 0.2437) to (0.4106, 0.3824), and the correlated color temperature can vary from 3296 to 9689 K. In particular, the thermal stability of composite fluorescent ceramics is improved obviously after laser ablation. At 423 K, the luminescence intensity at 535 nm and 620 remains 91% and 94% of that at room temperature, respectively. Combining a 460 nm blue chip and the composite fluorescent ceramic, a white LED with CRI = 90, and the maximum luminous efficiency can be up to 148 lm/W. Our results indicate that Y_2.84Lu_0.1Al₅O₁₂: 0.06Ce³⁺/SrAlSiN₃: Eu²⁺ composite fluorescent ceramics could be used in high-power white LEDs.     

Multicolour tunable luminescence of thermal-stable Ce3+/Tb3+/Eu3+-triactivated Ca3Gd(GaO)3(BO3)4 phosphors via Ce3+ → Tb3+ → Eu3+ energy transfer for near-UV WLEDs applications

A series of single-component blue, green and red phosphors have been fabricated based on the Ca₃Gd(GaO)₃(BO₃)₄ host through doping of the Ce³⁺/Tb³⁺/Eu³⁺ ions, and their crystal structure and photoluminescence properties have been discussed in detail. A terbium bridge model via Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer has been studied. The emission colours of the phosphors can be tuned from blue (0.1661, 0.0686) to green (0.3263, 0.4791) and eventually to red (0.5284, 0.4040) under a single 344 nm UV excitation as the result of the Ce³⁺ → Tb³⁺ → Eu³⁺ energy transfer. The energy transfer mechanisms of Ce³⁺ → Tb³⁺ and Tb³⁺ → Eu³⁺ were found to be dipole-dipole interactions. Importantly, Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors had high internal quantum efficiency. Moreover, the study on the temperature-dependent emission spectra revealed that the Ca₃Gd(GaO)₃(BO₃)_4:Ce³⁺,Tb³⁺,Eu³⁺ phosphors possessed good thermal stability. The above results indicate that the phosphors can be applied into white light-emitting diodes as single-component multi-colour phosphors.     

Effect of the Ce3+ concentration on laser-sintered YAG ceramics for white LEDs applications

This paper describes the laser sintering and luminescence properties of Y₃Al₅O₁₂ (YAG) phosphors doped with different concentrations of Ce³⁺ and synthesized using the polymeric precursor method. The ceramics were sintered by a new laser sintering technique in which a CO₂ laser is employed as the heating source. The resultant ceramics exhibited a homogeneous microstructure with narrow grain size distribution and high relative density. The introduction of Ce³⁺ ions led to luminescence quenching at a concentration above 0.5 mol% and a redshift of the emission spectrum band with increasing cerium concentration. The excitation spectrum showed two characteristic bands centered at 340 nm and 460 nm and a relative change in their intensity by change the Ce³⁺ concentration. The presence of a single valence (Ce³⁺) of cerium was determined by X-ray absorption near edge structure measurements.     

Novel orange-emitting Ba2LaNbO6:Eu3+ nanophosphors for NUV-based WLEDs and photocatalytic water purification

Energy conservation and environmental safety are the key requirements in the modern world. We report novel orange-emitting double perovskite Ba₂LaNbO₆:Eu³⁺ (BLN:Eu³⁺) nanophosphor fabricated using a citrate sol-gel method for use in general illumination and photocatalysis. After annealing at 800?℃, the particles exhibited a nanorod-like morphology with monoclinic structure. The photoluminescence emission spectra exhibited an intense ⁵D₀→⁷F₁ transition at 594?nm and a moderate ⁵D₀→⁷F₂ transition at 615?nm, demonstrating that the Eu³⁺ ions occupied the La³⁺ sites with inversion symmetry. The optimal concentration of Eu³⁺ ions was found to be about 5?mol% for the BLN host lattice. Energy transfer from the NbO₆^7- octahedrons to the Eu³⁺ ions was clearly witnessed when the BLN:Eu³⁺ nanophosphors were excited with both the characteristic excitation bands of Eu³⁺ (⁷F₀→⁵L₆) and NbO₆^7- octahedrons at 392 and 380?nm, respectively. The thermal quenching temperature of 5?mol% Eu³⁺ ions doped BLN nanophosphors was found to be 183?℃, indicating that these nanophosphors are very stable at high temperatures. In addition, the dye removal efficiency of the proposed BLN nanophosphors was verified using Rhodamine B (RhB) dye as a model pollutant under UV irradiation. Compared to a commercial nano-ZnO catalyst, our synthesized BLN nanophosphors showed superior RhB de-colorization efficiency. Therefore, the proposed BLN:Eu³⁺ nanophosphors are promising multifunctional materials for photocatalysis and general lighting applications.